IPod Touch 4th gen after updating to IOS 6.0.1 no longer plays sound when connected to a JVC KW-AV60BT through USB port.

It used to work fine, but now when you plug in to the USB, it properly identifies the head unit in settings>General>About, and the JVC unit displays album art, track info and scrolls through music fine, but no sound comes through the speakers. I've tried to reset all settings on the iPod, I've tried the reset on the head unit, even disconnected the vehicle battery and nothing changes. I can also add that my sisters iPhone 4S on IOS 6.0.1 also performs the same when connected. I've tried my Touch in the USB port of my 2010 Chevy truck and that works fine. oh, and an MP3 player worked proper with the JVC USB port.

- Try resetting the car system if you can.
Sometimes this works
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:       
iOS: How to back up           
- Restore to factory settings/new iOS device.
However. sometimes an iOS update breaks compatibility. In that case you will have to wait for a firmware update to either the care system or the iPod.

Similar Messages

  • Can't sync iPod Touch 4th Gen after updating to IOS 6.0

    I've updated my 64GB iPod Touch 4th Gen to IOS 6.0, but now I can’t sync it with iTunes.
    It connects OK, but iTunes isn’t detecting what is already there - it thinks it is full of 48MB of “Other” (rather than music, apps, photos, etc.). In other words iTunes isn’t detecting what is already on the iPod properly (it just knows it’s nearly full of something).
    So if I try to sync, iTunes thinks it needs to add all my music, etc. again, and therefore says it’s way over capacity (i.e. 48MB of “other” + 48 MB of all my music, etc.).
    Help! Any suggestions?

    - Try resetting the car system if you can.
    Sometimes this works
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:       
    iOS: How to back up           
    - Restore to factory settings/new iOS device.
    However. sometimes an iOS update breaks compatibility. In that case you will have to wait for a firmware update to either the care system or the iPod.

  • Charging problem on iPod touch 4th generation after updating to iOS 5.1.1

    I updated my iOS to 5.1.1 yesterday when I synced some new music onto my iPod touch 4th gen. It worked fine, and charged fine yesterda after the update. I had it plugged in charging until I left, I used it and it die over night. When I went to charge it, it kept coming up with "Charging is not supported with this acsessory" wether it was in the wall, or plugged into my computer. As most windows users will know, when you plug yout iPod into the USb port of the computer it comes up with the Scanner and Camera wizzard. I generally close this, but with my curiosity, I let it stay open (without running the wizzard) and now my iPod is charging from ym computer, as long as this is open. Why does the scanner and camera wizzard need to be open for it to charge? Is there a fix for this? I've seen symillar problems on other iOS devices after upgradign to 5.1.1, so could this problem be because of the iOS update?
    Thanks in advance, Alex "Twitch" Brent

    -Try another cable.
    - Look at the dock connector on the iPod look for foreign materia and abnormalities.
    - The nort charging topic of
    iPod touch: Hardware troubleshooting
    Try the standard fixes:
    - Rest. Nothing is lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup
    - Restore to factory defaults/new iPod

  • Does iPod touch 4th gen. have update with iOS 7?

    does iPod touch 4th gen. (old one like i bought mine in 2010 or 2011) have update with iOS 7? or is there any way to change from iOS 6 to iOS 7?
    or is it just iOS 6 only for iPod touch 4th generation.

    No iOS 7 for the 4th Gen...
    See the very end of this link for Compatible Devices and Features...
    http://www.apple.com/ios/ios7/features/

  • Facetime wont work on my ipod touch 4th gen. cant update to ios 7? what can i do?

    Cant get my facetime to work. I have an ipod Touch, 4th generation with ios 6. Theres no update for ios 7 as it needs bigger memory. Anybody managed to solve this problem?? HELP ME PLEASE!

    Not knowing what happens when yo try to use FT, try:
    iOS: Troubleshooting FaceTime                  

  • Skype microphone wont work on Ipod touch 4th gen after updating it.

    So i dont usually update apps that often. But i for some reason wanted to update skype. So i updated it and then went to go on skype with my friends. So i went on a voice call and it turned out they couldent hear me, it wasnt on mute, they didnt put me on mute blah blah. I just want it to work again.
    and going to Privacy>microphone>skype
    doesnt work cause the microphone option isnt even there....

    - Make sure the mic hole is clear and unobstructed. It is the little hole on the back by the camera lens(if has back camera). For the 16 GB one without the back camera the mic hole is on the top edge near the center.
    - Open the Voice Memos app and see if you see movement on the VU meter needle with changes in noise level trying to be recorded.
    - Reset the iOS device. Nothing will be lost      
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings                 
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                               
    iOS: Back up and restore your iOS device with iCloud or iTunes
    - Restore to factory settings/new iOS device.                       
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar                                                              

  • I have an iPod touch 4th gen that is in iOS 6.1 it's showing another update in the settings for iOS 6.1.6 but even if I wait for more than 30mins it won't show. Can anyone help me. Thank you and Godbless

    I have an iPod touch 4th gen that is in iOS 6.1 it's showing another update in the settings for iOS 6.1.6 but even if I wait for more than 30mins it won't show. Can anyone help me. Thank you and Godbless

    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on your router
    .- Reset network settings: Settings>General>Reset>Reset Network Settings
    - Try when connected to another network
    - Update via iTunes on a computer.

  • I'm lost with my new "used" iPod touch 4th gen.  Just downloaded iOS 6; seems to be trying to access a WIFI signal but I have it hard wired into my MAC and I do not have WIFI.  Need iPod for dummies.

    I'm lost with my new "used" iPod touch 4th gen.  Just downloaded iOS 6; seems to be trying to access a WIFI signal but I have it hard wired into my MAC and I do not have WIFI.  Need iPod for dummies - very basic and simple help.

    On the computer you should be able to go to the network properites. Go to the TCP part and unchec the line that says obtaind DNS automatically and check the one that says use the following. Add the 8.8.8.8 and Google other 8.8.4.4.
    For more info see:
    https://developers.google.com/speed/public-dns/

  • How to update iPod touch 4th gen 4.2.1 iOS to iOS 6

    My iPod touch 4th generation still has iOS 4.3.1 and I want to update to iOS 6. The update selection is not in general settings

    Update it from iTunes on a computer as described at the bottom of this article; devices running an iOS version prior to 5.0 can't be updated straight from the device. It will be updated to the newest iOS release supported by the device’s hardware.
    The maximum iOS version for the fourth generation iPod touch and iPhone 3GS is 6.1.3.
    (91207)

  • Unable to connect my ipod touch to itunes after updating to ios 5

    After i have finish updating my ipod touch 4th generation, to ios5 , my ipod was unable to connect to the itunes and all the apps and song are all missing from my ipod touch
    when i open my itunes it also say iTunes could not connect to this iphone because an unknown error occured (0xE8000065)
    Please help me thank you

    See this Apple support document related to your issue.
    iPhone, iPad, iPod touch: Unknown error containing '0xE' when connecting to a Windows PC
    B-rock

  • CANNOT RESTORE MY IPOD TOUCH 1ST GEN AFTER UPDATE, WON'T RESTORE TO PREVIOUS IOS EITHER.  hOW CAN i GET IT TO WORK? TO 3.1.1. IOS

    My ipod worked until I purchased teh iOS 3.1.1 update from the apple store.  Now my Ipod touch 1g will not even restore to the original iOs.  How can I get it to update to the 3.1.1 version or restoer it.  It worked fine prior to the update.

    Just to give you an update, I got the iOS 3.1.3 installed (Even with the error messages 1602 & 1604). This is how I did it.
    1. Turn off all spyware and antivirus
    2. Open ITunes and purchase iOS and download (don't connect you ipod to the computer yet), don't select download and install. Close itunes after download.
    3. My ipod was frozen with the connector and iTunes symbol in the screen, so I turned it off and with the usb plugged into the computer, hold the home button down (Puts it in recovery mode), now connect the end of the sync cord to the ipod, open iTunes and let it boot up.  You should see the message that it found an ipod in recover and need to be restores. click ok and then select update.
    4.  This is where it will update and freeze again in restore. To continue update, leave the ipod connected (Don't touch it at all.  Close iTunes and then reopen it.  The connection should be made the the update should install.
    It worked for me, maybe it will fro yo.

  • A friend gave me his iPod touch 4th gen to update from 4.2.1 to ios6.0.1 I don't want this iPod associated with my account. Just want to have the latest software for him. What should I do?

    I want to update this iPod without losing all of my friends music and apps. What should I do?

    To update
    iTunes 10 for Windows: Update and restore software on iPod, iPhone, or iPad
    A 2G to 4.2.1. Requires iTunes version 10.X. That requires a Mac with OSX 10.5.8 or later. With 1OSX 10.4.11 you can only go to iTunes 9.X which gets you as high as iOS 4.1
    A 3G to 5.1.1  Requires iTunes version 10.5 or later
    A 4G to 6  Requires iTunes version 10.7 or later. That requires a Mac with OSX 10.6.8 or later
    Identifying iPod models
    Since you are stuck at 4.2.1 you may have a 2G iPod.
    iPod touch (3rd generation)
    iPod touch (3rd generation) features a 3.5-inch (diagonal) widescreen multi-touch display and 32 GB or 64 GB flash drive. You can browse the web with Safari and watch YouTube videos with Wi-Fi. You can also search, preview, and buy songs from the iTunes Wi-Fi Music Store on iPod touch.
    The iPod touch (3rd generation) can be distinguished from iPod touch (2nd generation) by looking at the back of the device. In the text below the engraving, look for the model number. iPod touch (2nd generation) is model A1288, and iPod touch (3rd generation) is model A1318.

  • I have an ipod touch 4th gen and I have songs on it which I cannot remove, even when I sync it and untick the songs they will not remove from the ipod, doesnt work manually either, help

    I previously had an ipod nano but now have an ipod touch, when I synced it for the first time I got songs on to the ipod which I dont want, I have tried unticking them in itunes library and this doesnt work.  I have also tried going to summary to remove manually but it doesnt show any songs in this box to be removed.  Can anone help please.

    Is your device recognized by your computer? If yes, copy the pictures and videos as shown in this article:
    Copying personal photos and videos from iPhone, iPad, or iPod touch to your computer
    If it is not recognized, try this first: iOS: Device not recognized in iTunes for Windows
    Disable autosync in iTunes, right click on it in the device list and choose "transfer purchases" to copy apps and other media bought in iTunes to your new library.
    Do the same again and choose "backup", to create a manual backup without syncing.
    Since your device will be erased due to the new iTunes library during the first sync, you can use this backup afterwards to restore your settings and data.
    Set up at least one contact and event on your computer before you start, to be able to merge calendars and contacts.

  • Ipod touch 4th gen..updated to the most recent iOS and can not synch to get my apps and music back

    ... my ipod locked up.  I found the instructions to reboot.  I then had to reset it to factory settings.  Now the ipod will not synch to bring back all my apps and music (which I can see on my itunes account). When I connect to the computer with the USB cable, it opens up itunes and goes right to the 'set up your ipod' screen and asks me to restore from a backup.  I have done this at least three times.  I even dissabled my security / antivirus software and still no success. What steps am I missing?

    Downgrading is not supported by Apple.
    Apps can be downloaded again for free: Downloading past purchases from the App Store, iBookstore, and iTunes Store
    If he still has any backup, for example as part of the computer backup routine, he could restore the settings and data again by replacing the iTunes backup folder. The folder is located here:
    Windows XP:\Documents and Settings\(username)\Application Data\Apple Computer\MobileSync\Backup\
    Windows Vista and Windows 7:\Users\(username)\AppData\Roaming\Apple Computer\MobileSync\Backup\
    Note: If you do not see the AppData or Application Data folders, you may need to show hidden files (Windows XP, Windows Vista, Windows 7), or iTunes may not be installed in the default location. Show hidden files and then search the hard drive for the Backup directory.
    copied from: iTunes: About iOS backups

  • What is the best YouTube App for my iPod Touch 4th gen after iOS 6 comes out?

    iOS 6 states that it will remove the default YouTube app due to the end of a licensing agreement. So I'm wondering what YouTube app is the best? (features-wise, rating-wise,etc)

    Have you tried the Google YouTube app?
    http://itunes.apple.com/us/app/youtube/id544007664?mt=8

Maybe you are looking for

  • Reading in a text file

    For my next project I'm supposed to read in a text file and then compute the legibility index. How do I go about reading in a text file?

  • Sending a email when a line is Backordered

    Hi All, I am looking for the possibility of sending a eamil to a user when a line gets backeorderd at Pick release or at ship confirmation. Is there any seeded workflow which can be used to send the email notification. Regards Deepak

  • LR and PS housed on D drive

    Can I move LR and PS to my D:drive where there is plenty of space as apposed to my C:drive? And how?

  • MC207 display module cover cracked

    Hello everyone! After some months of using my new white MacBook I've noticed that, due to a very hot airstream running through the vents on the lower back side, the part of the display module that is right above the rear vents has cracked. That wasn'

  • Oracle Error Code and Message for Query Timeout

    Hi, I need to catch the oracle error code and message for query timeout. I am using Oracle 9i and could not find any relevant error code/message for query timeout in Oracle Error Messages. If anyone has encountered such error messages, please let me