IPod touch 4th gen  - no sound from speaker dock

After upgrading my 4th gen iPod touch o iOS 5, the speaker dock no longer works. The dock charges the iPod, but iPod still continues to output sound from the internal speaker rather than the speaker dock. My iPhone with iOS 5 works fine on the dock. I have restored the iPod to a fresh state but the problem still persists
What could be the problem?
Thank you

Based on your troubleshooting, it would appear theat iOS 5 on the iPod made the dock incompatible.  Have you loked at the dock manufactore's support site?

Similar Messages

  • Ipod touch 4th gen no sound!

    My Ipod Touch 4th gen has no sound!!!

    First, try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.

  • A friend gave me his iPod touch 4th gen to update from 4.2.1 to ios6.0.1 I don't want this iPod associated with my account. Just want to have the latest software for him. What should I do?

    I want to update this iPod without losing all of my friends music and apps. What should I do?

    To update
    iTunes 10 for Windows: Update and restore software on iPod, iPhone, or iPad
    A 2G to 4.2.1. Requires iTunes version 10.X. That requires a Mac with OSX 10.5.8 or later. With 1OSX 10.4.11 you can only go to iTunes 9.X which gets you as high as iOS 4.1
    A 3G to 5.1.1  Requires iTunes version 10.5 or later
    A 4G to 6  Requires iTunes version 10.7 or later. That requires a Mac with OSX 10.6.8 or later
    Identifying iPod models
    Since you are stuck at 4.2.1 you may have a 2G iPod.
    iPod touch (3rd generation)
    iPod touch (3rd generation) features a 3.5-inch (diagonal) widescreen multi-touch display and 32 GB or 64 GB flash drive. You can browse the web with Safari and watch YouTube videos with Wi-Fi. You can also search, preview, and buy songs from the iTunes Wi-Fi Music Store on iPod touch.
    The iPod touch (3rd generation) can be distinguished from iPod touch (2nd generation) by looking at the back of the device. In the text below the engraving, look for the model number. iPod touch (2nd generation) is model A1288, and iPod touch (3rd generation) is model A1318.

  • Brand new iPod touch 4th gen will not sit on dock of Sony Dream Machine

    model ICF -C1iPMK2
    I even wasted money on the three pack of inserts to ensure my touch was resting properly
    I have no idea why it won't rest down on the dock - it is like it's two different sizes of 30 pin connectors? is anyone else having this problem? I don't want to be too forceful with it for fear of breaking something irreplaceable

    Im having the same problems with the latest ipod touch not sitting into a bose portable sounddock.
    Sure, the portable sounddock has an aux port in the back which I can use once I find an audio cable with male ends on both sides.
    After reading this thread, I took an x-acto knife and tried to remove/thin the piece of silver plastic at the back of the ipod touch. didnt help much until I took the same knife and tried to thin the grey plastic innard of the sounddock connector. That worked.
    so basically, i removed a thin bit of grey plastic from the inside of the male connector on the sounddock.
    was worth a try.
    I've also emailed Bose support. They're generally very helpful with these things and the last time when I upgraded from an ipod mini to ipod touch, I called them and they sent me (for free) a set of new dock inserts for the ipod touch.

  • TS2771 Why does my ipod touch 4th gen not have any sound when on dock?

    My daughter's ipod touch 4th gen did work on a dock and no longer does. I have read a number of pieces of advice - download an update of iTunes, reset to original settings, neither seems to have helped. As it is less than 12 months old, do you think I return this as it is still under warranty? She got a dock for Christmas and is VERY disappointed that her iPod does not work on it, even though her old CHinese copy of an ipod (1st) will work on the dock. HELP!

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Inspect the dock connector for bend or missing contacts, corroded contacts, broken, missing or cracked plastic.

  • Brand New Ipod touch 4th gen  right earphone jack not working out of the box. Bought at Wal-Mart yesterday. Are we missing something in the set up or should we return it?

    We just purchased an ipod touch 4th gen 8 gb from Wal Mart. OUt of the box the right headphone is not working. Tried numerous pairs of headphones..tried the mono settings and nothing is working. Is there a setting we are missing or should we just return it?

    If the headphone plug is fully inserted, I would return the iPod for a replacement

  • Just got a ipod touch 4th gen yesterday and didnt get charger is there anyway i can get one for free?

    any help on getting a free ipod touch 4th gen charger?

    From whom did you purchase it?
    Make an appointment at the Genius Bar of an Apple store.
      Apple Retail Store - Genius Bar

  • Why is my ipod touch 4th gen with ios 6 only have sound in the speakers but not when I plug my headphones in

    My new ipod touch 4th gen with ios 6 wont play soun in the headphones, but only through the speaker when my head phones are unplugged

    - You do have the volume set all the way up?
    - Have you tried another pair of headphones/do the headphone work in other devices?
    - Try cleaning out/blowing out the headphone jack. Try inserting/removing the headphone plug a dozen times or so.
    Try the following to rule out a software problem:
    - Reset the iPod. Nothing will be lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup
    - Restore to factory settings/new iPod.
    Make an appointment at the Genius Bar of an Apple store. It seems yo have a hardware problem, likely a bad headphone jack.
    Apple Retail Store - Genius Bar

  • After updating iOS on my iPod touch 4th gen my Philips speaker dock DC290B/37 no longer charges the iPod.  It will play music but not charge, is there anyway to find out if Apple is working on an update/fix?

    after updating iOS on my iPod touch 4th gen my Philips speaker dock DC290B/37 no longer charges the iPod.  It will play music but not charge, is there anyway to find out if Apple is working on an update/fix?

    Try:
    - Reset the dock
    - Reset the iOS device. Nothing will be lost      
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings                 
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                               
    iOS: Back up and restore your iOS device with iCloud or iTunes
    - Restore to factory settings/new iOS device.                       
    Otherwise you are out of luck. Apple is not making any more update for the 4G.
    Also check with Phillips. Maybe they have an firmware update available

  • Quarter-inch female to a 3.55mm male to connect guitar to my Ipod Touch 4th gen. It still records from mic and not from wire.

    Hey everyone, I recently bought a quarter-inch female to a 3.55mm male to connect my acoustic electric guitar to my Ipod Touch 4th gen. Now when I connect it, it doesn't actually take the sound from the wire, it still keeps the mic open. Any suggestions?

    You can try putting the iPod into Recovery Mode and restoring it:
    http://support.apple.com/kb/ht1808
    If that doesn't work, then sorry but the jailbreak may have permanently corrupted your iPod. Since we cannot help with jailbroken devices in these forums, you'll need to look elsewhere for additional suggestions and advice.
    Regards.
    Message was edited by: Dave Sawyer

  • My ipod touch 4th gen. will not allow me to adjust volume with my speaker, but will with headphones. How do i fix this?

    My ipod touch 4th gen. will not allow me to adjust volume with my speaker, but will with headphones. How do i fix this?

    - Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so. There is a little switch in the headphone jack that disconnects the speaker when the headphone jack is inserted.
    Try the following to rule out a software problem
    - Reset the iOS device. Nothing will be lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup
    - Restore to factory settings/new iOS device.
    - Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack or other hardware problem
    Apple Retail Store - Genius Bar

  • IPod Touch 4th Gen starts from the same song

    I recently updated my iPod Touch 4th gen, 32 GB to iOS 6.1.2, from 5.1.1. I skipped iOS 6.0, 6.0.1, 6.0.2, 6.1, and 6.1.1. After the update, I noticed that when I play music from my "All Music" list, my iPod always starts on the same song, no matter what song I listened to last. Sometimes it starts at a song that's farther down the list, but I haven't been able to figure out what circumstances caused it to start at that song. To make things more confusing, once it chooses a different song, it always starts from that song.
    I have confirmed that Shuffle and Repeat are both OFF. This issue occurs whether I have recently charged/synced my iPod or not. It also occurs after I perform a hard restart on the iPod. I have not tried restoring it, because I have not had time to dedicate the several hours it would take to re-install iOS and copy all of my stuff back onto it.
    My computer is running Windows 7, 32-bit. My iTunes is version 11.0.2.26.
    Any help would be greatly appreciated, and if anyone has questions relating to this issue, I'd be happy to answer them.

    I didn't mention this in my initial post because I didn't think it was relevant, but the Home button on my iPod doesn't work. I've been using the virtual home button provided by turning Assistive Touch on.
    I did try the first solution you suggested, but nothing happened. I'll make another post when I try the second method.
    On a side note, and if it makes any difference, the device in question is not a phone. It's an iPod Touch.

  • I have 300 apps organized in folders on my ipod touch 4th gen, and connected my iphone 4, these apps have copied over but none have been placed in folders, any ideas how to replicate folders from ipod to iphone...?

    I have 300 apps organized in folders on my ipod touch 4th gen, and connected my iphone 4, these apps have copied over but none have been placed in folders, any ideas how to replicate folders from ipod to iphone...?

    What may work is to restore the iPhone fom the backup of the iPod.  However, if the two devices ahve different apps that come with the device, that may mess up some of the folders.

  • Is it still possible to downgrade from ios 6 to ios 5.1.1 on my ipod touch 4th gen as of Sept.24?Also, if I use a backup created AFTER updating to ios 6 when I restore/downgrade to ios 5.1.1, does it become ios 6 again because of the backup?

    Is it still possible to downgrade from ios 6 to ios 5.1.1 on my ipod touch 4th gen as of Sept.24? Also, if I use a backup created AFTER updating to ios 6, when I restore/downgrade to ios 5.1.1, does it become ios 6 again because of the version of ios 6 that I created the backup on?

    There has never been a legit way to downgrade.
    It will always restore to the latest available software.

  • Is it possible to get data from a smashed/broken iPod touch 4th gen?

    Is it possible to get data from a smashed/broken iPod touch 4th gen?

    - If when you connect the iPod to your computer it appears in iTunes then you can make a backup and then restore another iPod or other iOS device from that backup.
    - Otherwise you will have to go to a data recovery company.
    - When I go to the YouTube link I can't get the video to play.

Maybe you are looking for

  • Use of macro EXIT_RETURN

    Hi Expert,                   I am facing one problem in my custom method I have to fill the container &MESSAGE& with the error detail and raise an exit_return 1001. But when the exit_return 1001 called the container &MESSAGE& was not populated. but i

  • Have Adobe Creative Suite 6 Design & Web Premium but...

    Hi Guys I wanted to sign for Complete individual Creative Cloud but I am not sure if it's in my case $19.99 or $29.99 for information, I got CS6 from Adobe Creative Suite 4 Design Premium, I bought in 2009 Please let me know Thanks in advance, Thierr

  • Why is date not attached to picture

    When I send photos via Apple Mail, why does the recipient not have the date?  Is this fixable on my end or hers?

  • PLD-Journal Entry - BP Name not appearing

    Hi, In printouts of journal entry which involves the Business partner name, the name of the party is not displaying in the printouts , Instead it is giving the control account of that party eg : entry in the name of "ABC Customer" But in printouts it

  • Funktion Call in the C-kernel

    Hello all in the file sapactab.h (Based in Kernel) is the coding for the ABAP Statement Call. Does anybody know with C-Statement (in c) is it. Thanks for your help Chris