IPod touch 4th generation will not connect to Uverse internet

When Uverse internet was setup in my home my 64 gb IPOD touch 3rd generation stopped connecting to internet.  I've turned my wifi off and on (that doesn't work), I've tried rebooting the IPOD by turning it completely off then turning back on.  I've manually added my IP address, network and password and it's still not working.  Is there anybody in the community that can give me a few positive suggestions?  Thanking all of you in advance.

- Contact Uverse support
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.

Similar Messages

  • My ipod touch 4th generation will not connect to Itunes.

    I registered it on a different computer and then was able to connect after that. Now it won't connect to Itunes, but my old Ipod still connects I did the suggestions and also redownloaded Itunes. Any suggestions?

    Did you try all the troubleshooting here:
    iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows

  • IPod touch 2nd generation will not connect to home wifi

    My ipod touch 2nd generation will not connect to the internet. I am using a BT modem and this is a new problem. Until recently, I had no problem with this connection and it will connect to BT Fon and BTOpenworld. I just cannot get it to connect at home any more. I also use a macbook pro and this is connected to the bt modem.

    You should post this in the iPod Touch forum.  This is the iPod Shuffle forum.
    https://discussions.apple.com/community/ipod/ipod_touch
    B-rock

  • Ipod touch 4th generation will not restore

         My ipod touch 4th generation will not restore. It begain with a random problem with the device. I tried to open a application but the application would blink a few times then would not open. This was so for ALL of the applications. I then powered of my device to try and reboot it. The Apple logo will apear for about 5 seconds but then the sreen will go black and the Apple logo will apear again. I tried to reboot several times and it did not work. I then connected my device to my computer but it would not appear in Itunes. The only way for the device to appear was for me to put it into DFU mode by holding down the home and power button for 10 seconds. My Itouch would have the connect to Itunes on it. It was then reconized by Itunes. Itunes message appeared telling me that i need to restore my Ipod. I tried restoring the Ipod, but after the update downloaded a error would appear while it was going through the restoration proccess.
         My Ipod is under the one year warrenty and i also had purchased an extended two year warrenty for my Ipod. I do not know what i should do.

    ok i will my friend has my ipod right now but If it doesn't still work ill get the error number tomorrow.

  • IPod shuffle 4th generation will not connect to iTunes.

    iPod shuffle 4th generation will not connect to iTunes.  Windows Vista and iTunes, all updates current.  Cables secure & connected.  Device driver will not load.  iPad will connect when tried with several other computers.  When I try to connect it will hang iTunes until I re-boot.  iPad does NOT appear in Windows Explorer either.

    Oh, so the iPad DOES work fine connected to the same computer and the same port.  I thought you said it did not in the first post, but maybe you got that working (or I misunderstood before).
    NOTE:  When things are working properly, the shuffle will not appear in Windows Explorer (except when actively syncing), unless you have Enable disk use turned on for the shuffle.  So not seeing it in Windows Explorer may not be a problem.
    Is this shuffle a new purchase... so it did not previously work for you on this computer?  If so, make sure that the shuffle end of the USB cable is fully inserted into the headphones jack.  The fit can be tighter than expected, and it may seem connected, but is not.  For a surprising number of people, this was the problem.
    In iTunes, is the sidebar (along left side of window) visible.  If it is hidden, from the iTunes menu bar, under View, select Show Sidebar.  When there are no devices connected, the heading DEVICES should not appear in the sidebar.  When you connect your iPad, DEVICES should appear, with the iPad listed below.  If you connect the shuffle, it is be added to the list under DEVICES.  To confirm, you do not see the shuffle listed there under DEVICES, when it is connected?
    When you connect the shuffle, does its light on the shuffle do anything?

  • My ipod touch 4th generation will not charge or cut on? can you please tell me whats wrong with it.. i have tried the holdin the home and lock button at the same time and still won't cut on

    hello my ipod touch 4th generation will not cut on or charge. i have tried the holding the home and lock button and still won'ty work. i don't know what to do. can you help me please

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

  • My ipod touch 4th generation will not leave the apple logo sign

    my ipod touch 4th generation will not leave the apple logo sign what do i do to turn it on and work ? please help

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • HT1459 My iPod touch 4th generation will not even turn on so I can't get the serial number.

    My ipod touch 4th generation will not even turn on so i can not get the serial number. what can I do?

    If you synced with your computer then use the iTunesmethod included here:
    - iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number

  • My ipod touch 5th generation will not connect properly to charger.  I have tried on different cords but it will not show that it is charging.

    My ipod touch 5th generation will not charge when connected to charging cord.  I have tried two different cords with same result.  It will charge for a second then show not charging.   Any suggestions?

    - See:       
    iPod touch: Hardware troubleshooting
    - Try another cable
    - Try another charging source
    - Inspect the dock connector for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
    - Make an appointment at the Genus Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • Okay my iPod touch 4th generation will not sync. I reinstalled iTunes . Can someone please tell me what to do?!?!?! Oh would there be any chance that me letting my friend use my sync cord could've messed it up???

    I need some help. I want to sync my iPod touch 4th generation and it WILL NOT sync. I reinstalled iTunes and it still won't sync. I also let my friend use my sync cord, could that have anything to do with my problem?? I really need some help. So please answer me back if you know what could be wrong.

    Could be the cable.  Have you tried:
    iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows
    or
    iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X

  • IPod touch 4th generation will not sync with iTunes, but shows up in Windows 7 64bit(Acer Aspire laptop)

    Hello all, I am writing this message in the hope that somebody can help me to solve my issue with my iPod touch fourth generation. It has been unable to sync with iTunes, but shows up in windows as the iPod touch. I also had this problem with my older iPods as well (Ipod nano 4th Gen, iPod touch 2nd gen(Batteries done for that one)) I can sync music with iCloud, but I have a bunch of songs that are not in the store, and I sincerely want to add those, alot.
    I've checked the "iPod appears in Windows but not in iTunes" with the link here: (http://support.apple.com/kb/TS1363), and followed that process, but to no avail, it does not solve the problem. I've tried to reset the entire ipod by making it enter DFU mode and then rebooting the entire iPod (shows up in iTunes in temporary mode) but once restored, does not appear in iTunes, but still in Windows detected still as a iPod, looks like the iPod and everything. I also have the most uup-to-date iTunes installed (10.5 I believe, just got it today)
    This is extremely frustrating because that is why I purchased the iPod (and for the games and apps, those are great too). The iPod was also purchased three days ago, and the setup still didn't detect it.  I am not mad at anybody here or the Apple company itself, but I have not found any help online with the browsing option (for support of course).
    Please, I would absolutely love the help, i'd be eternally grateful for it.
    -Tyler

    Never mind, turns out that by uninstalling the programs "Megakey" and "Megaupload" it had resolved this issue.

  • My iPod touch 5th generation will not connect to secure WiFi networks.

    My 5th gen iPod touch will not connect to Secure wifi networks. It always says incorrect passcode. I have checked the passcode over and over again and I am sure it's correct. it's not just happening with my home network, also at work it never works. It is fine connecting to unsecure networks though. please help me.

    Try the following to rule out a software problem:                 
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on the router
    - Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar

  • HT1848 my ipod touch 4th generation will not power on, and itunes doesn't recognizes it when it is connected through the usp

    I can not get my Ipod touch to power on, and it isn't recognized by itunes when it is plugged in. does anyone know what the problem could be and or have had the same problem and fixed it??? I appreciate any and all help with this problem, and definately open for suggetions. Thanks again. Cynthia

    Try:                                               
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable       
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • IPod touch 4th gen will not connect to anything after update. Please help.

    Ok, so I haven't updated my 4th gen ipod touch since I bought it, which was well over a year ago. Just recently, apps have started to force me to update to the newest iOS and many updates require it too, so I finally decided to update and get it over with. Well, I synced everything from my ipod and then updated. Well, to my horror after I came back I found out that even though I had CLEARLY synced my apps. They were gone on BOTH my ipod and my computer.
    Not to say I was really ticked off or anything, but I had almost 15 GB or so of just apps on my 32 GB itouch. I read somewhere that I can go back and reinstall all my apps but that would be a PAIN. Turns out there aren't many others ways to go about doing it so I was left with little choice. Well, once again, I ran into the problem that absolutely nothing would connect on my ipod touch.
    So, I have two problems actually:
    1. Is there anyway besides reinstalling apps for me to get back all the apps I had prior to updating my ipod? And in the future, how can I prevent itunes from deleting my apps when I clearly have them synced before updating?
    2. Why won't my ipod touch connect to anything wifi related? When I open the app store it just simply loads. And it will continue loading forever; I had it "loading" for about an hour until I decided to come here. Same goes with iCloud, facetime, Safari - just anything that has to do with connecting to my wifi.
    Things I've done: I've restarted my ipod once already, I've reset my router as well, and I've also tried to disconnect from my router then reconnect. None of them have worked so far. Any help would be appreciated.

    - If synced media like apps and music are not in the iTunes library on the computer one which you update they will not be on the iPod after the update since the backup that iTunes makes does not include synced media..
    This is discussed in
    iOS 4: Updating your device to iOS 5 or later
    - For the wifi problem
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on the router
    - Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar

  • My brand new iPod Touch 4th generation will not sync with iTunes on my Windows Vista computer!  Please help!

    I have tried every trick in the book and read every thread on why my version of Windows Vista will not allow me to get at the iTunes Store.  I cannot even get this new iPod Touch to sync with iTunes. 
    I've rebooted, soft restart, hard restart, removed iTunes and re-installed iTunes.  Nada...nothing!
    Does anyone else have the same issue and can they offer me a solution?

    See here for different ways to conserve your iPod's battery life.
    http://www.apple.com/batteries/ipods.html
    B-rock

Maybe you are looking for

  • SAP Business One iPad Apps Sales Catalog photo problem

    Dear all, I have a question about the iPad SAP Business One Mobile Apps Sales Catalog. Inside the Sales Catalog, it will show the Item group with pictures and when you look inside the item group, it will show the Item image which is set up in the Ite

  • Under line in Sap Script

    Hi Experts, can body let me know how can we underline for word or sentence in sap script out put? Regards

  • Black Magic Intensity Pro output issues in FCP7

    I just installed a Black Magic Intensity Pro in my office's edit/mix computer. I cannot get FCP7 to output video correctly. The monitor auto senses the HDMI output settings correctly (matching what I have chosen in FCP) but I only get a freeze frame

  • Java extension functions

    I am trying to execute XSL transformation of XML document in Oracle 9i database and I am using java extension function in XSL stylesheet. The XSL stylesheet namespace for the extension function is defined as follows: xmlns:distance="http://www.oracle

  • Iphone 4s dropped in water

    Hello Everyone one of my family member dropped an iphone in water and the worst part is he actually called me from same phone although it still being wet sounds stupid i know anyways the situation is weird, infact feel lucky even after he did such a