IPod Touch 5th gen no longer working with Mini stereo...

I have an 'entertainment pack' in my Mini that allows me to connect my iPod Touch 5th gen to the car stereo (via USB & aux in cables) to both listen to it and scroll through my music through the stereo interface. I have had a few problems before with it not connecting but these usually resolved themselves within a day or so and I think were more to do with my lightning to 30 pin adapter than my actual iPod. However, since I installed the latest ios7 update a couple of days ago I cannot get it to work at all and keep getting a message saying 'this accessory is not supported' when I plug the iPod into my car. Any suggestions on how I can resolve this?

Try another adopter, a genuine Apple one
Next:
- Reset the iOS device. Nothing will be lost       
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings                  
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:                                                
iOS: Back up and restore your iOS device with iCloud or iTunes
  - Restore to factory settings/new iOS device.            
Sometimes an iOS update breaks compatibility and you will have to wait for an update to either the car system or to the iPod

Similar Messages

  • Can't activate imessage on my daughters ipod touch 5th gen.  Comes back with "An error occured during activation".  It was working until I updated to latest IOS version 7.1.2.  Can anyone help.

    Can't activate imessage on my daughters ipod touch 5th gen.  Comes back with "An error occured during activation".  It was working until I updated to latest IOS version 7.1.2.  Managed to update Facetime ok but can't do anything with iMessage.  Can anyone help?

    - Reset all settings                            
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                               
    iOS: Back up and restore your iOS device with iCloud or iTunes
    - Restore to factory settings/new iOS device.                       
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
      Apple Retail Store - Genius Bar                                              

  • Does it make sense to buy an iPod touch 5th gen. 64 gb with iOS 7 and upgrade it to iOS 8, or spend a few bucks more and buy one with iOS 8 already installed?

    Does it make sense to buy an iPod touch 5th gen. 64 gb with iOS 7 and upgrade it to iOS 8, or spend a few bucks more and buy one with iOS 8 already installed?

    The iOS update us free so I would get the less expensive one.
    If you are getting a used one make sure this is done before you purchase it. Otherwise it may still have the Activatin Lock on
    Find My iPhone Activation Lock
    Apple's new iCloud tool can show if a used iPhone is stolen

  • IPod touch (5th Gen) will not work in my 2013 GMC when connected via USB since I upgraded to iOS 8.2

    I recently updated my iPod touch 5th Gen to iOS 8.2.  I use it to play music in my 2013 GMC via USB connection.  Now, when my vehicle's system "detects" my device, it starts playing the song and after about two seconds it just quits.  Help, please.

    Sometimes this works but sometimes an iOS update breaks compatibility, Fir the latter you have to wait for an update to the iOS or the firmware for the car system
    - Reset the iOS device. Nothing will be lost      
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset the car system
    - Reset all settings                            
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                               
    iOS: Back up and restore your iOS device with iCloud or iTunes      
    - Restore to factory settings/new iOS device.                       

  • How do I sync an iPod touch 5th gen to a computer with an outdated iTunes?

    I just bought an iPod touch 5th gen today, and everything is great except for the fact that I can't put any of my songs from my computer on it!!! :( my computer is an iMac OS X 10.5.8 and I can't update my iTunes to the software needed to sync with my iPod touch 5th gen, any advice please??

    Bradenfrommn wrote:
    ... my computer is an iMac OS X 10.5.8 ...
    any advice please??
    Upgrading to Snow Leopard = OS X 10.6.x
    It is Not available as a download... It is a Paid Upgrade.
    Do this first...
    Check that your Mac meets the System Requirements for Snow Leopard...
    Snow Leopard Tech Specs
    http://support.apple.com/kb/SP575
    If so... Purchase a Snow Leopard Install Disc...
    http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
    Other countries...
    http://support.apple.com/kb/HE57
    After the Successful Install, run Software Update to get the latest updates for Snow Leopard and iTunes.
    You should now be able to Sync.
    Be sure to make a Backup of your Current System Before Upgrading...

  • Why does my Ipod touch 5th gen not sync podcasts with my Windows Itunes? Both are up to date with versions.

    I didn't see this asked so sorry if this is a duplicate question.
    In Itunes (it is the most recent version for windows available as of 2/12/2014) all my podcasts are showing they have downlaoded to my PC. They don't have the little cloud next to them. I sync my Ipod touch 5th gen. The sync shows everything was synced. I look at the "Whats on this ipod" tab and they are listed. But when I disconnect the ipod via the "eject" icon on the Ipod button in itunes and look at the podcasts they still show as not downloaded (greyed out and if wifi is turned on the little cloud is next to them ).
    So whats going on? I had this issue with my ipod touch 4th gen as well and though it was because the podcast app stopped upgrading but the itunes on windwos did. But the syncing of the podcasts are even worse with the 5th gen then they were with the 4th gen.
    I typically don't have wifi turned on since I want to sync the ipod via itunes. So I have a central place to keep the old podcasts without having to take space on the ipod itself. I saw some references to the downloading of podacasts are done only via wifi, but that just didn't make sense. Why be able to sync Itunes if they are just going to turn around and make you do the same on the device?
    Any ideas? Suggestions?
    Thanks for the help in advance.

    Maybe:
    "Waiting for changes to be applied": Apple Support Communities
    Also I requested that your email address be deleted. Personal responses are not given in this forum

  • Why doesnt the Ipod touch 5th gen have Battery Percentage with IOS 7?

    I read that the Ipod touch 5th gen will have battery percentage with IOS 7. But so far it doesnt. Just wanted to know if this was a lie or if something happened and apple decided to remove it.

    "Battery percentage in status bar added to iPod Touch (5th generation)"
    I seen this
    and i have seen pictures of the Ipod touch with the percentage next to the battery on the apple website.

  • My ipod touch 4th gen dosen't work with my intempo speakers!

    I got my speakers when that old square ipod nano came out. My speakers worked fine with that ipod. i just got a new ipod touch 4th gen and when i put it on my speakers it says "charging is not supported with this device" and when i play music it just plays through the built in speaker not the speakers its pluggen into
    HOW DO I GET IT TO PLAY THROUGH MY SPEAKERS ITS SOOOO FRUSTRATING!!!!!

    Some older accessories are not supported by the latest iPOd and some older ones with the latest iOS.  Have you checked the manufacturer's website?

  • My iPod touch 5th gen 16gb isnt working, My iPod touch 5th gen 16gb isnt working

    So, just got this iPod touch 5th generation 16gb but when i tried updating it on my computer it the update stopped halfway through, itunes closed and wont open anymore, and my iPod just has an image of an itunes symbol above an arrow and the end of a usb cord that plugs into the ipod. I have tried to turn it on and off again but it doesn;'t work and itunes wont open on the computer either. help?

    Try:                                               
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable       
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar                              
    Then if necessary:
    iOS: Device not recognized in iTunes for Mac OS X
    Or
    See
    iOS: Device not recognized in iTunes for Windows
    - I would start with
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    or              
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
    - Then do the other actions of:
    iOS: Device not recognized in iTunes for Windows
    paying special attention to item #5
    - New cable and different USB port
    - Run this and see if the results help with determine the cause
    iTunes for Windows: Device Sync Tests
    Also see:
    iPod not recognised by windows iTunes
    Troubleshooting issues with iTunes for Windows updates
    - Try on another computer to help determine if computer or iPod problem

  • Dos the IPod Touch 5th gen have a back cam mine dos not

    Do's the IPod 5th Gen have a back Cam mine do's not

    The iPod touch 5th Generation 32GB and 64GB has the back 5 MP camera. You have the 16GB iPod touch 5th Generation which only has the front facing 1.2 MP camera. They took the camera off for the lower price.

  • Ipod touch 5th gen suddenly not compatible with volvo s60 through usb

    My 5th gen ipod touch is suddenly not working in 2013 Volvo s60.  When I plugged it in via usb this afternoon (as usual), message came up on screen saying ipod was not compatible with this accessory.  I've already tried resetting it by pushing home and power button at same time but it didn't work this time.  Worked fine until today.  Any thoughts?

    Try:
    - Reset the iOS device. Nothing will be lost      
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Try another cable if it is a Lightning to USB cable
    - Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
    - Reset all settings                            
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                               
    iOS: Back up and restore your iOS device with iCloud or iTunes      
    - Restore to factory settings/new iOS device.                       

  • IPod Touch 2nd gen no longer syncs with itunes?

    I just recently upgraded to Snow Leopard.
    Now my ipod touch won't sync to itunes. It syncs with iphoto, although I can't put new albums on it. It doesn't allow me to 'sync ipod' in the itunes menu. And it doesn't automatically sync like it used to. I can't even update my ipod to a newer version, because it won't sync.
    I also don't know if I can update to the newer 5.0 system, as this is an older ipod touch. (2nd generation)
    Please help. Do I have to reinstall itunes, etc. to get this to work??

    - A 2G iPod can only go to iOS 4.2.1
    - Try the following:
    iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X
    Do not overlook the Additional Information topic.

  • IPod Touch (2nd gen) - Does not work with Component AV Cable

    I have a 2nd generation iPod Touch. Today I bought the component AV cable at the Apple store (along with a universal dock). Connected it correctly to the TV and:
    1. No picture (screen is blue, as though nothing connected); no sound (whether video or music)
    2. Whatever video is playing on the actual iPod gets stuck - as though it is on "pause", with the difference that you can push "play" and "pause" and the only thing that does is change the "play" or "pause" icon from one to the other or vice-versa--video will not actually play
    3. Setting Widescreen to "on" or "off" has no effect
    4. Tried connecting it to an old iPod Nano (2nd gen I think) - also no sound.
    Please advise!

    Alex_K
    Try changeing your TV out setting, found in the (Settings) of your ipod. Following Paragraph found in the iPod User manual (Page 98): http://support.apple.com/manuals/#ipodtouch
    "Use these settings to set up how iPod touch plays videos on your TV. For more
    information about using iPod touch to play videos on your TV, see “Watching Videos
    on a TV” on page 39.
    Turn widescreen on or off: Choose Video and turn Widescreen on or off.
    Set TV signal to NTSC or PAL: Choose Video > TV Signal and select NTSC or PAL.
    NTSC and PAL are TV broadcast standards. iPod touch displays NTSC 480p/PAL 576p
    when attached to a TV using a component cable, or NTSC 480i/PAL 576i using a
    composite cable. Your TV might use either of these, depending on where you bought
    it. If you’re not sure which to use, check the documentation that came with your TV. "
    Hope that helps,
    Weston

  • My FaceTime on my iPod Touch 5th gen doesn't work.

    It rings and when I go to answer it, it just says 'connecting' but doesn't actually let me on to the call itself. Why might this be?
    I have tried calling my boyfriend several times and he has tried calling me (we both have 5th generation iPod touches) but when we answer them, it just says 'connecting' but doesn't let us on to the actual call.

    Judging by all the posts on the forum, there seems to be an issue at Apple's end, although they have made no announcement on their status page. Some users have reported that Apple is aware of the issue. You can leave feedback for Apple at the link below.
    http://www.apple.com/feedback/

  • IPod touch 2nd gen. won't work with old accessories

    I just had to buy a new 2nd generation iPod touch because the last one broke. I was mad to find out that my FM tuner and my ihome wasn't supported by the new iPod. Is there any way I won't have to buy all new accessories?

    Did you previously have a 2nd generation Touch? On this new Touch, did you install the 3.0 update?

Maybe you are looking for

  • My hard drive on my Macbook Pro died and I need to get CS6 back.  How?

    .

  • Displaying xml as html in Flash

    Hi I'm struggling with an xml problem. Within my Flash movie (CS3), I have two dynamic text boxes (one titled 'title' and the other titled 'description'). The text and images are calling into Flash without a problem, but in the 'description' text box

  • PO printing into PDF using a customized program

    Dear All, I understand that program RSTXPDFT4 is use to generate/print PO in PDF format using the spool no as input. My question is there any similar program like this that PO can be printed in PDF but the input is PO Number.? Thanks, Rgds, Shela

  • APEX Dynamic Actions?

    Hello i'm trying to figure how how to have a dynamic action populate text fields. When the create button is hit, it will insert the record in the DB like normal. I had a search box doing a dynamic action when a record_number is entered and the select

  • Very Slow

    Hi , I have a New PC that im running CS6 and particularly with Indesign its painfully slow. i have been working on resolving these issues for quite some time now have tried all the tips and tricks i can google the PC should be the issue Dell T8510 3.