IPod Touch can't backup after upgrading to iOS4

I have an iPod touch 2G 8GB, and since I updated to iOS4 it restarts every time it tries to backup. This means that I can't sync, can't put new music/movies/pictures/podcasts on my ipod. I was able to restore, but since it still has iOS4 it still can't sync.
When it tries to sync, it will work fine until it starts "Backing Up "Fenrir"..." and gets to about ~20%. Then the ipod will appear to be loading (it will bring up the ring of dots indicating as such). Then the screen abruptly goes dark, and then lights up again with the apple logo. iTunes loses contact with the ipod, though no error message is given, and then it shows up again as though it was just connected. This happens consistently, exactly the same way, every time I try to sync.
Any solutions? Should I just go back to an older version of iOS until these issues are sorted out?

I had the same issue, and after extensive searching and troubleshooting, I pretty much figured out the following: iOS4 has a bug for many ipod touch 2g's and iphone 3g that it simply will not restore from a pre-iOS4 backup. I had to do a new ipod install, lost all app settings, and then it worked fine. I have since tried installing the old backup, no dice, but the new post iOS4 backup I made for test purposes works. Until Apple releases a patch, it seems as if old backups will just cause one error or another.

Similar Messages

  • IPod Touch WIFI Signal Fluctuates After Upgrading to iOS4

    I upgrade to iOS4, and now my iPod Touch 3rd gen's WIFI signal fluctuates now matter how close I am to my Airport. I can be right next to the Airport and the signal will go back and forth from one bar to three bars. Never happened with OS 3.1.3.
    Message was edited by: Bruce Kieffer

    monepone wrote:
    For those having Wi-Fi issues... What level of encryption are you using on your routers? And is your router at full power? I'm not really having any Wi-Fi issues, I'm using WPA-PSK [TKIP] + WPA2-PSK [AES] and I switch my router to full power after I started having the iOS4 batter problem. (it was on "Neighbor Friendly" Mode). I was worried that a weaker signal would contribute even more to the already existing battery drain and I'm figuring that having the encryption on the highest level is also affecting the battery as well, but I haven't tested the difference.
    Using WEP + hidden SSID at home (I have some devices that choke on WPA). Open WiFi access with authentication at work. Router signal boosted from 42mW to 70mW using Tomato firmware.
    Also, if you're using a Pre-N router, disabling "Neighbor Friendly" mode means you're using a ton of 2.4GHz channels. This prevents any neighbors near your home from using WiFi, because you've stolen all of the available channels. I had to set up my sister-in-law on Wireless-A, because her backyard neighbor hates her, and turned off "Neighbor Friendly" mode on his router. What a pain.

  • IPod Touch 1st generation froze after upgraded to iOS 3.1.3

    iPod Touch 1st generation froze after upgraded to iOS 3.1.3.  iTunes 10.4.1 shows synced and current, but iPod frozen with logo and progress bar on screen.  can anyone help?  tnx.

    Place the iPod in recovery mode and then try to restore. For recovery mode see:
    iPhone and iPod touch: Unable to update or restore

  • My ipod touch getting much slower after upgrade to ISO 5.1.1

    my ipod touch getting much slower after upgrade to ISO 5.1.1
    could it be downgrade? or how to solve this problem.....

    I checked settings-->general-->about-->diagnostics & usage --> diagoostics & usage data, finding that almost every time I use the ipod touch, it sufferred the low memory issue after upgrading to ISO 5.1.1
    will ISO 6 help? or will it get the ipod slower even than ISO5.1.1.1?

  • IPod touch 4,1 bricked after upgrading to iOS 6.0 and then 6.0.1.

    Hi all
    I have an iPod touch 4th generation, 8GB. The other week I installed the new iOS 6.0 software update, from 5.1.1. after installing and rebooting the iPod just when black, I have assumed that it's been bricked, but how? It just stays black, sometimes it'll reboot, but then go black again, sometimes it'll do the infinite loop of death! Then I force it into Recovery mode, clicked Restore and after iTunes extracing the IPSW, it came back with error -1 ????? So I put it into DFU mode, then iTunes showed that iOS 6.0.1 was released. iTunes downloaded it, i put it into DFU mode and then restore to the new 6.0.1, and then everything goes well, untill it does the same as before, when I upgraded to 6.0?
    I know I can't downgrade back to 5.1.1, Apple had stopped signing old ipsws, but I do however have my previously saved SHSH blobs, I can patch them onto my 5.1.1 ipsw, but I don't know weather that's illegal or not. SO, basically, my iPod is unusable.
    Troubleshooting - what I've done:
    -I've deleted the 6.0 and 6.0.1 and being promted to download them again in iTunes, still didn't work
    -I've tried reinstalling iTunes, current version 10.7, I run weekly Apple Software updates to get the lastest
    -I've tried using different USB cords, Apple 30-pin connector cords, don't know if that was necessary
    What Haven't done:
    -Never Jailbroken this iPod
    -Never moderated, read, write or execute any iPod software or any of the Raw system files
    My iPod was just fine before all this crap happened, I depend on it for everything, although the Capacity isin't great, and the RAM is just ****, please someone help :'(

    Error 1 or -1
    This may indicate a hardware issue with your device. Follow Troubleshooting security software issues, and restore your device on a different known-good computer. If the errors persist on another computer, the device may need service.
    - If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order. Note the article includes :"the device may need service".:
    Apple Retail Store - Genius Bar

  • Can't backup after upgrade to OS4

    I've upgraded to OS 4 and iTunes 9.2. Basically, the OS 4 works fine on my iPhone. But I can't backup data via iTunes. iPhone re-starts during the backup process. Then, the whole sync process halt. After the sync process halt, my data (calendar, contacts, songs, etc) can't be synced to iPhone... Is it the problem of OS4 or iTunes? How can I finish the backup and sync process?

    I've hard reset the iPhone twice. The issue still exists! I can't finish the backup process. The iPhone re-starts during the backup process...

  • IPod Touch No Longer Syncs After Upgrade to 10.8.3

    I recently upgraded my computer from OSX 10.5 to 10.8.3. But while my iPad seems to sync fine, my iPod touch no longer syncs and it is not recognized by the Apple store. Please help!

    When I plug in my ipod, a message pops up that says:
    "This computer is no longer authorized to play purchased items that are on the iPod (my ipod name). Would you like to authorize this computer for items purchased from the iTunes Store?
         >If you do not authorize this computer, 191 songs will be removed from the iPod"
    I click "authorize"
    Enter my apple ID (note that for some reason it keeps bringing up an apple id from 2006, even though the computer and ipod are from 2011 and 2010.)
    Then it says "this computer is already authorized"
    And every time I plug it in, the same thing happens.
    Sorry I wasn't clear before.

  • Ipod Touch 2G now 'useless' after attempting the IOS4

    Hopefully Apple have an inclination ho to resolve this. My 2G Touch was fine and for months I didnt bother with the IOS 3 upgrade as I 1) didnt want to pay for it and 2) didnt think I would use many of the features. However after finding more and more apps needed the new software I decided to do it today. To my surprise, the IOS 3 was now replaced with IOS 4 and it was free......result. I followed the instrcutions and while it attempted to load the drivers......it couldnt and I cannot recover my Ipod. Device isnt recognised now when I plug in the USB. I get yellow exclamation marks for the apple mobile device recovery driver.My Touch,no matter what I do has a picture of a USB cable on it.I have uninstalled and reinstalled Itunes.........all to no avail. Any help would be great..........PLEASE

    Sorry you have had so many problems. You are going to need to tackle this one step at a time.
    PC
    1. You must have at least Windows XP, service pack 2.
    2. Use Control Panel to delete all Apple Software - iTunes, Apple Mobile Device Services, QuickTime, etc.
    3. Reboot your computer
    4. Download and install iTunes 9
    5. Turn off anti-virus and download the iOS4 update
    6. Turn off your firewall before you begin the the update process on your touch
    iPod touch
    1. Make sure it is unplugged from your computer
    2. Hold down the Sleep/Wake button and turn it off (it may not respond to this)
    3. Start iTunes on your computer
    4. Press and hold the Home button on your touch. Keep holding this button down and plug your touch back into your computer. Keep holding it until iTunes says "an iPod has been detected in recovery mode".
    5. Follow the on screen instructions.
    If you encounter any errors, note the number. More information on those errors can be found in the Apple tech article: http://support.apple.com/kb/TS1275

  • If you have ipod touch 2g will it be upgraded to ios4?

    and how much will it cost?

    I doubt it. The hardware may not support it.
    Basic troubleshooting steps  
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
    Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101

  • IPhone will not restore from backup after upgrading to iOS4

    Hey guys,
    I updated to iOS4 just fine on my iPhone 3G 16gb model. Unfortunately, what occurred after that is what's giving me a headache. Whenever I try to restore my iPhone from the backup I created, my laptop keeps freezing when it hits about 8-10% completion. It has no major problems with freezing or locking up, and I'm pretty sure that my iTunes is the problem. My phone will now no longer play my music, nor will it even display half of my custom ringtones(even though they appear on my ringtones list under my iPhone in iTunes), nor will it display any of the songs that I purchased through iTunes on my phone recently.
    Most of the other features are working fine, though I have not tested everything. I still receive text messages, phone calls, and can access the internet, so it works how I absolutely need it to, but this is becoming an extremely frustrating ordeal. Please let me know if anyone has experienced something similar or knows of a solution.
    Thanks!
    Message was edited by: Jeff Kim

    I can't find anything specific on that error code, but this Apple article may give you some ideas on how to fix it: http://support.apple.com/kb/TS1275
    You may have to "Restore as New" if you cannot get it to restore from a backup. You will lose your game data but that is about the extent of the effect.

  • HT1414 Ipod Touch can't find Bluetooth device. (Jam Box)  Upgraded Itunes software did a backup and restore on the Ipod.  My PC sees it fine.  IPod used to work with JamBox.  Reset Jambox, no luck. Followed every instruction from the forums. Still no luck

    Ipod Touch can't find Bluetooth device. (Jam Box) 
    Upgraded Itunes software did a backup and restore on the Ipod.
    My PC sees Jam Box fine.  IPod used to work with JamBox.  Reset Jambox, no luck.
    Followed every instruction from the forums. Still no luck.
    Reset Jam Box to factory settings. 

    Did a network reset on the Ipod after the backup and restore.  No luck

  • All of the music on my Ipod Touch is blown out after I synched it with my new MacBook. I didn't get the 'synch' warning-- but now can't find my library of songs. I'm about to panic!

    All of the music on my Ipod Touch is blown out after I synched it with my new MacBook. I didn't get the 'synch' warning-- but now can't find my library of songs. I'm about to panic!

    The iPod backup that iTunes makes does not inlcuded synced media like apps and music. Thes those iTunes are not restored to the iPod unless they are in the iTunes library.
    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Unsync all music and resync
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:       
    iOS: How to back up
    - Restore to factory settings/new iOS device.

  • I have an IPod Touch and how do I upgrade the OS so I can download stuff that needs IOS 4 or 5 please?

                        I have an IPod Touch and how do I upgrade the OS so I can download stuff that needs IOS 4 or 5 please?

    Which iPod touch do you have? If you're not sure, take a look at this -> Identifying iPod models
    This Apple article outlines the versions of iOS that will work on each iPod touch.
    Notes:
    iOS 4.2 is the latest version of iOS for iPod touch (2nd generation).
    iOS 3.1.3 is the latest version of iOS for iPod touch (1st generation). If you are using an iPod touch (1st generation) with iOS 2.x or earlier, you can purchase iOS 3 from the iTunes Store. See this article for more information.

  • My ipod touch 4G got problem after update to iOS 6, it can not access the Apps store ,can not access safari,map, weather and so on, could someone help me to solve the problem, thanks in advance~~~

    My ipod touch 4G got problem after update to iOS 6, it can not access the Apps store ,can not access safari,map, weather and so on, could someone help me to solve the problem, thanks in advance~~~

    Force close the App Store app and reset the iPad. No data will be lost when you reset the device.
    In order to close apps, you have to drag the app up from the multitasking display. Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to the app that you want to close and then swipe "up" on the app preview thumbnail to close it.
    Next, reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

  • "iPod Touch can not be backed up. The file needed can not be found" This is an error message I got when trying to restore my iPod Touch today after the volume bar disappeared!

    Today the volume bar disappeared on my iPod Touch leaving me with no volume control. When  I tried to do a restore I  got the message "iPod Touch can not be backed up. The file needed can not be found" I'm in a double whammy here. First off has anyone ever got and cured either problem?
    Thanks!

    Problem solved thanks to another post here on the same topic.
    1-Opened i Tunes & Connected iPod Touch
    2- Unchecked "Open iTunes when connected"
    3 - Synched iPod
    4- Hit "Apply"
    5- Checked "Open iTunes when connected"
    6- Synched iPod
    7 - Hit "Apply"
    8- Ejected iPod and closed iTunes
    9- Re-connected iPod Touch
    10- iTunes opened automatically!  

Maybe you are looking for

  • How do I delete my iCloud account from Apple?

    I have an iCloud account which I never used.  Wanted to delete it to minimize the potential hazardous of being hacked.

  • Alerts viewer - component

    Hi I am looking for an alert viewer component. Does anyone have a recomendation of a commercial one? I need something that will look like "hp open view" Also.... I would like to know of a swing components package - one with it's own "sorted" tables,t

  • Compatible with macbook pro

    I would like 2 know if there is any FREE software for either mac or curve 2 make my bbcurve comatible with my macbook pro. everytime i plug bb into computer 2 backup or sync my mac trys 2 put all its music on my bb and causes my bb 2 freak out!! i ha

  • OS DB Migration in different customers

    Hi, We are planing to do OS/DB migration from ECC6.0 IBM AIX/Oracle 10.2 to Windows 2003/MS SQL2005 . source and target clients are different customers but both are sister companys and having the agriment to view the data. Now my question is source s

  • EEM script to alert on IP SLA failures

    I have the following IP SLA set up and would like to do the following. I would like to have a log entry if any of the below have a failure and then send an email alerting to that failure. Is there a way to do this with EEM? ip sla 1010 udp-jitter 64.