Ipod Touch - cannot find server

Hi, I am having desperate trouble in trying to connect wirelessly to an Airport extreme base station. All seems to be working, with itouch offering connection to Airport. We have a whirring spinner, then I get the infernal message "Safari can't open the page because it can't find the server." I have tried all combinations of settings, but all to no avail! Can anyone help please?
kind regards
Marineman012

First and formost, turn off your Airport. Turn off your Touch. Turn on your airport and then turn on your touch. If that does not help, repost.

Similar Messages

  • Ipod touch cannot find sensor

    I have had my sensor for about a week. First time I used it, it worked great. Since then the touch cannot find the sensor. I have the sensor in a pouch on top of my shoe with the flat side up. Any suggestions? Thanks. Also what is the purpose of the small button on the rounded side of the sensor?

    My wife and I also just bought iPod Touches, Nike+ sensors, and Nike+ shoes. Mine has been working perfectly, but hers synced on day 1, but now acts like the sensor is broken (it isn't, because it syncs with my iPod touch). I'm wondering if there is a problem with her iPod (it's an 8GB 3G, whereas mine is a 32GB 3G).
    We tried waking up the sensor by pressing the button on the unit, and even putting the sensor to sleep first by holding in the button for 3 seconds. We know how to sync it, because we can sync it with mine. I'm calling Apple today and will report back with any findings.

  • My iPod touch cannot find a wifi connection even though my iPad can. How do I fix this?

    I am having trouble getting my iPod touch to connect to any wifi connection even when my computer and iPad can, how do I fix this?

    Do you mean that no network show in Settings>wifi?
    Is this your problem?
    iOS: Wi-Fi or Bluetooth settings grayed out or dim
    - Restore from backup
    - Restore to factory settings/new iOS device.
    - Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • "Cannot Find Server" Constant Error Message

    I've been having this problem for quite some time. I will attempt to connect to a website only to wait forever and then get a "Cannot find server" error message. It's not just with one site, it happens with many.
    It's also random. Sometimes everything connects fine and fast, and then inexplicably I get "Cant' find server" for sites like Facebook, Amazon, even Apple. It can start working again for a few minutes and then in an instant I'm getting error messages again.
    However, my email always works fine.
    And this is NOT a Safari problem. I also get the same trouble when I switch to Firefox or Explorer. My ISP says it's an Airport / Mac issue since it all works fine if I direct connect to the laptop and because my email is also working.
    In addition, when I'm having this problem, my iPhone also cannot connect to the WWW but can get email.
    I've tried powercycling the modem and the airport numerous times. It's really becoming a pain.
    Any thoughts?

    Me too I tried everything. I am an Apple fan with 2 computers,3 iPods. I have no idea what the problem is. I had to re-run the disk each time to find the internet. Finally tried a Linksys Grouter worked first time-laptop anywhere in the house strong signal. I have had similar problems with an Airport Express-never got it to work-so tried the Extreme. I returned it-I didn't want to but I just could not get it to work.

  • "Podcasts on the iPod 'iPod touch' cannot be synced ....?????

    I'm getting a "Podcasts on the iPod 'iPod touch' cannot be synced because all of the podcasts selected for syncing no longer exist" pop-up when ever I sync.
    Here is a post that seems to addressing the same type of error message for a failed music sync but after reading it I'm not making any sense of how it might relate to the a problem with a podcast sync: http://discussions.apple.com/thread.jspa?threadID=1788041.
    In a reckless attempt to fix the problem I deleted all the playlists which I created in iTunes, then deleted and resubscribed to the podcasts, and then did a sync. But the error still occurs and no podcasts were added to the iTouch (even though the newly resubscribed podcasts are in iTunes on my PC). I also found that I could download a podcast directly to the iTouch without having to subscribe to the podcast in iTunes. But I'd rather be getting the podcasts via the subscription feature that is in iTunes and then syncing them to the iTouch.
    Any ideas what is going on ?
    Thank you.

    After reading your post several times, I think I understand what you are saying, but can we just check the precise sequence of events, for (let's say) one Podcast episode?
    Are you:
    1. downloading the Podcast in iTunes;
    2. Syncing the iPod and therefore placing that Podcast on the Touch;
    3. Listening to the Podcast and then using the delete facility _on the Touch_ to delete that Podcast from the Touch;
    (3A. Adding more Podcasts (and/or music) to your iTunes Library;)
    4. Performing another Sync and getting the message "Podcasts on the iPod 'iPod touch' cannot be synced because all of the podcasts selected for syncing no longer exist"?
    Step 3A may or may not have occurred, it's not crucial. What is important to find out from you, are you deleting Podcasts on the Touch?
    Phil
    Oh, and by the way, if new Podcast are no longer being transferred to the iPod, has the setting for syncing Podcasts been changed? Look on the Podcasts pane when you connect the iPod to iTunes.
    Message was edited by: the fiend

  • In my haste i sent a message to "erase ipod touch" on find my iphone when iI lost my lost ipod touch. Can I reverse that? Anthony

    In my haste i sent a message to "erase ipod touch" on find my iphone when iI lost my lost ipod touch. Can I reverse that?
    Thanks in advance,
    dizzysaxy

    Sort of if you can get hold of the iPod before it is erased, turn wifi off, then backup the iPod, turn wifi on and let it erase. Then restore from backup.

  • Is there any way to locate an iPod touch when find my iPhone has been downloaded to it but not switched on this same iPod touch?

    I recently purchased my daughter an iPod touch, downloaded find my iPhone on the fourth day and she lost it on day 5 before I could turn on the app.  I did not know if there is a way to activate the app remotely or another solution.  Any suggestions?

    Sorry to say... No. There is no way to turn on the app remotely.

  • My ipod touch cannot be reconised on itunes a box apears which says this ipod cannot be used because the softwareis not installed .unistall itunes and reinstall this i do to no avail

    my ipod touch cannot be rceconised on itunes this come up the ipod touch cannot be reconised besause the software is not installed use the installer to uninstall itunes ane reinstall this i have done still not working

    This might help restart it http://support.apple.com/kb/TS1567

  • IPod touch cannot be synced because there is not enough free space to hold all of the items in the iTunes Library

    Hi, I have just transferred my whole iTunes library from my old computer to my new one and am trying to sync my iPod to the new one. However I get an error message saying "iPod touch cannot be synced because there is not enough free space to hold all of the items in the iTunes Library (additional 5.38GB required). I currently have 8.5GB free on my iPod so I don't understand why it cannot sync.

    Hey Georgiarose94, If what's going on, is what I think it is, when you sync the information it's over written, it can take 2 to 3 times more space the get the info on your iPod, once it's there the info only occupies the space it needs. Kind if of like moving, when you first step in the room with boxes of stuff there's no room. But after you get everything put away all is well. If you haven't already, connect your iPod to your computer, from your iPod Summary page, go down to Options and check reduce bit rate to (select 128 kbps). (Wording maybe a little different). Will greatly reduce memory space needed on your iPod, and you really do not hear the difference in sound quality. Other option, go to music and select manual so you can pick which music you place on the iPod. You need to reduce by 5.38GB of information to finish your download. Hope this helps. Cheers.

  • HP Laserjet 2015 ..."Cannot Find Server"

    I am having trouble in having my printer be a... "Network Printer"….  It is a HP Laserjet 2015 Printer.
    I have a Mac OS version ~ 10.8.2 on my Apple computer.
    If i have the printer connect directly to the computer via USB, (with no network) the printer works fine, but if I try to set up a network using an Ethernet Cable from the Printer Server to the Linksys E1200 Router, then I am unable to print. I get a page with ERROR messages.
    I am using a HP JetDirect 175x  External Print Server
    When I run "Network Diagnostics"…. I get a….. "Cannot find Server"….. along with the message below….
    Jim
    Network Diagnostics
    “Cannot Find Server”
    This computer appears to have a working Internet connection, but cannot find “HP LaserJet 2015 (00110AB8E541)._printer._tcp.local.”.  You may have typed the address incorrectly.
    On the Sidebar titled, “Network Status”
    Wi-Fi is............……........ Green
    Wi-Fi Settings is...…..... Green
    Network Settings is…... Green
    ISP is.....................……... Green
    Internet is...............…..... Green
    Server (Failed) is...……... Red
    This question was solved.
    View Solution.

    Thank you Garland_M for replying.  
    I have since removed the Printer Server, and found that I can simply put the USB Cable from the Printer to Computer 1, and Computer 2 will see it on the Network..... so I didn't even need that Printer Server in my setup as I had been informed.
    Jim

  • Network Printing... "Cannot Find Server"

    I am having trouble in having my printer be a... "Network Printer"….  It is a HP Laserjet 2015 Printer.
    I have a Mac OS version ~ 10.8.2.....
    If i have the printer connect directly to the computer via USB, (with no network) the printer works fine, but if I try to set up a network using an Ethernet Cable from the printer to the Linksys E1200 Router, then I am unable to print.  I get pages with Error messages.
    When I run "Network Diagnostics"…. I get a….. "Cannot find Server"….. along with the message below….
    Any suggestions?
    Jim
    Network Diagnostics 
    “Cannot Find Server”
    This computer appears to have a working Internet connection, but cannot find “HP LaserJet 2015 (00110AB8E541)._printer._tcp.local.”.  You may have typed the address incorrectly.
    On the Sidebar titled, “Network Status”
    Wi-Fi is............……........ Green
    Wi-Fi Settings is...…..... Green
    Network Settings is…... Green
    ISP is.....................……... Green
    Internet is...............…..... Green
    Server (Failed) is...……... Red

    rkaufmann87,
    The printer that I have does not have network capabilities built in.... to have the network capabilities, HP says an additional piece of equipment must be used.... in my case, an HP JetDirect 175x Print Server... I found a used one on eBay that was inexpensive, so I purchased that, and have been trying to configure it to my computer and printer for about 5 hours now.... all I got were error pages.
    I have an older iMac (2008), and I wanted the ability of the use of one printer for the new and old computers.
    After I read your advice, I disconnected the HP JetDirect 175x Print Server entirely, and used just a USB cable from the printer to the computer. 
    The printer worked great from my new computer, but I still wanted the ability of using the printer with the older computer (Wi-Fi). I went into the Print & Scan of System Preferences, and for the heck of it, I clicked the "Printer Sharing" box. 
    I went to the old computer, and for the heck of it, I tried printing something.... LO & BEHOLD it worked. 
    I don't know how it works, because as I said before, the printer is not network-ready.  When I bought the printer several years ago, there were two printers of that model on the shelf.  One was a HP 2015, and the other was a HP 2015n.... (n meaning network).  At the time I didn't think that I would ever need a network printer, which was more expensive, so I purchased the non-network one.
    Now I am truly bewildered as to how I am able to print from both computers without the HP JetDirect 175x Print Server.
    Do you, or anyone else have the answer to that????
    Jim

  • IE returns "Cannot find server" page during Servlet processing

    I have 2 JSP applications, that require a certain amount of server processing before they complete. For small amounts of information, both of these applications work fine. However, with larger amounts of processing, IE seems to timeout or have a problem maintaining its session and returns with "Cannot find server" - the actual server processing continues meanwhile. This only happens with IE - other browsers maintain persistence. The "timeout" is always consistent - 5 minutes or so with one of the applications, 13 minutes with the other.
    I can find no IE configuration that controls this. Since this doesn't happen with other browsers, is this an IE problem or a design issue with the application that doesn't manifest itself with other browsers ?

    I wouldn't call it an IE problem. I would call it a design issue -- you should not take that long to return a response to the browser. Instead, you should return an immediate response that says something like "Your request has been received for processing", and have some other thread processing requests off-line. That other thread should send a notification (by e-mail?) to the user when the request has been processed, including a link where the data can be accessed.

  • Forms/4GL Tutorial Returns Cannot find server or DNS Error

    Hi:
    I am trying to plow through this tutorial (10.1.3.1.0) and when I run the SRList.jpsx page I receive the error: Cannot find server or DNS Error. The URL produced by JDeveloper is:
    http://192.168.99.36:8988/SRTutorialADFBC-UserInterface-context-root/faces/app/SRList.jspx.
    Any suggestions?
    I've culled the forums and the Web, and cannot find a match. The only nugget that I can add is that I'm using JDeveloper with the OA Framework extension. I have been successful creating pages with OA Framework and executing them. Is there some incompatibility with OA Framework and ADF?
    Any help is greatly appreciated!

    Mchrist,
    You cannot use the OA Framework download to develop ADF apps.
    I would create two batch/command files: in each one, set JDEV_USER_DIR and any other environment variables to point to a proper place and run the JDeveloper.
    Just unzip JDev and OA Framework to separate locations and ensure that the user directory for each is in a separate location as well.
    John

  • Cannot find server error trying to download Migration Workbench

    I've been trying to download OMWB for the last 4 days, from Oracle Migration Workbench Downloads / Release 9.2.0.1.2 for Microsoft Windows 98/NT/2000/XP page.
    Keep getting 'Cannot find server' and 'Page cannot be displayed' errors in Internet Explorer.
    Is this the correct URL:
    http://download.oracle.com/otn/nt/omwb/92012/omwb_92012.exe
    I downloaded and used the previous version of OMWB. Was very satisfied with it. Unfortunately, I had to rebuild my hard drive and lost OMWB.

    I suggest that you retry, maybe there was some network glitches... If you follow the links from OTN you should be able to download no problems. Did you try the split downloads as an alternative?
    Donal

  • Database Control on Windows - Gives error Cannot Find Server or DNS Error

    hi all,
    After installing 10g on Windows, the necessary services for my new db are running, listener is up.
    But when I try to bring up Database Control via http://pnclultraprd.corporate.mem.5500/em/console/logon/logon
    I get "The page cannot be displayed. Cannot find server'
    I've not had this before on new installations and I'm stuck.
    Any tips? thanks, John

    What is the status of the enterprise manager and agent,
    emctl status dbconsole
    emctl status agentHTH
    Aman....

Maybe you are looking for

  • Restarting After a Blue Screen Stop Error

    I have received a Blue Screen Stop Error on my Toshiba Satellite 5200 Series laptop. I could report it here, in full, if that would be helpful. However, it begins by telling me to restart the machine but the unit's Power button is not allowing me to

  • Scanning conflict   Acrobat 9 pro   "Color Format Selected Not Supported"

    I have had several conflicts with Adobe Acrobat 9 and my HP C5180 printer/scanner/copier.   I have downloaded new drivers from HP.   When I try to create  a PDF from the scanner,  I get this conflict warning:   "Color Format Selected Not supported". 

  • Importing .doc with embedded images?

    I have a word doc which has an image embedded in it (jpg, I think). When I import it into Pages, there is an empty space where the image would fit, but no image. If I click in that space the image frame appears. How can I get the image itself to appe

  • Multiple Flash player in One WebPage.

    hi, I tried to test Smart Seeking with multiple flash player in One WebPage. So, Only one player is started and the others is buffering. What's problem ? I changed properties like 'MaxIOThread', 'MaxConnection'. but it's useless. Please advice to me.

  • Document Service Configuration

    Dear Experts, I am trying to configure Credentials for Adobe Document Service (ADS) but in visual admin I am not able to select p2-0000106.pfx file because the credential file is empty. Followed steps : cluster --> server --> services --> Document Se