Ipod touch connected to tv by av adaptor and hdmi cable will play BT sport sound only.  Why no picture?

I have connected my ipod touch to my tv using a digital AV adapter and a HDMI cable to try to watch BT sport on the tv, but I am getting the sound without the picture. Any ideas?

For the 4G and earlier iPods, TV out only works for apps that support TV out. If they do not, then you only get sound.

Similar Messages

  • Hi my iPod touch gen 4 has stopped working properly and App Store will not load but Internet will, also you tube also won't load. Any ideas?

    Hi my iPod touch gen 4 has stopped working properly and App Store will not load but Internet will, also you tube also won't load. Any ideas? I should probaly also add that I have also recently tried to download a screen recorder from safari and a message keeps popping up and saying that it can't verify server, even for this website

    Reset the device:
    Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
    If that doesn't help, tap Settings > General > Reset > Reset All Settings
    Files cannot be downloaded from Safari on an iPod touch.

  • I have made a playlist on my iPod touch 4th generation for some friends' wedding and I want to play the list in the order I wrote it. It keeps shuffling though, so how do I play it in track order?

    I have made a playlist on my iPod touch 4th generation for some friends' wedding and I want to play the list in the order I wrote it. It keeps shuffling though, so how do I play it in track order

    In iTunes, before you sync the playlist, you can right click on the playlist and select the option that says "Copy Play Order" that will preserve list in the order you have them.
    Though this page is outdated, I believe it still applies:http://support.apple.com/kb/ta27500
    Hope this helps!

  • IPod touch frozen on screen showing apple symbol and usb cable.

    Pod touch frozen on screen showing apple symbol and usb cable. Happened during a update attempt.

    First, try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    Finally, if the Restore doesn't work, let the battery drain completely.  Then recharge for at least an hour and Restore again.

  • Screen turns black after connecting TV via DVI adaptor  and HDMI cable

    I've just got the brand new MacBook Pro from the Apple Store. It is sensational.
    But one thing doesn't work!
    I used my old "*DVI - HDMI cable*" and the new "*Mini DisplayPort - DVI adaptor*" to connect my new MacBook with my SHARP Aquos LCD TV. But the screen of the MacBook just turned black and nothing else happened, even if I removed the plugs. The only thing I was able to do was a reboot.
    The HDMI cable worked very well until today with my old PowerBook G4 (I just didn't need the adaptor).
    Do I need another adaptor? What is wrong? Any ideas?
    Thank you!

    Did you ever resolve this problem? I want to hook up my MBP to my Aquos TV and wondered what cable to get.
    Regards,
    Kent Larsson

  • If you buy an iPod shuffle can you put iTunes videos on it, and then when the iPod is connected to a player with a screen the video will play?

    does anyone know an asnwer to this question?

    I suppose if you enabled disk use, stored it on in the iPod, then copied the file to the computer you're wanting to play it on. If you mean directly from the iPod to a TV... no.

  • TS1538 In Windows Vista my iPod Touch is recognised as a stills camera and the driver will not install.  Any ideas?

    Any advice on how to overcome this prob;lem would be appreciated.  I have followed the steps suggested by the online Apple Support without success.

    Have you tried everything here:
    iOS: Device not recognized in iTunes for Windows
    including:
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    Tried another cable
    Tried another computerto help determine if yo have an iPod or computer problem.

  • After update iOS 5.0.1 VGA adaptor and HDMI cable are not support on my iPad 2...

    Please help me.....

    las opciones de video ya no se encuentran en el menu del ipad por lo cual no permite la conexion a un tv lcd, ya que aparece que no se encuentran dispositivos HDMI conectados.
    video options are no longer on the menu of the iphone so it does not allow connection to an lcd tv, since it appears that they are not connected HDMI devices.
    PLEASE HELP ME!!!!!!!!!

  • HT201274 After i erased all my content and settings on my ipod touch my screen has the itunes logo with the cable. how do i get my ipod to work again?

    After i erased all my content and settings on my ipod touch my screen has the itunes logo and a cable on it. how can i get my home screen back?

    Connect the iPod to your computer and restore via iTunes
    iTunes: Restoring iOS software

  • Remote App on IPod Touch Connect to ITunes on Win7

    Is anyone having a problem making the Remote APP on ipod touch connect to ITunes on Win7 over WiFi? Itunes sees it alright, asks for a Passcode which the ipod supplies, considers it and then says it is invalid. I'm open to suggestions.

    Yes it is, I click on the "Remote" button, type the passcode into iTunes, it thinks for a while then comes back and says "invalid passcode". The two are communicating or iTunes wouldn't show the "Remote" button or display the passcode entry window.

  • My iPod touch is synced to my old Mac and I have a new PC. Now when I plug my iPod into the new computer it will make the connection sound, but will not show up in my iTunes. I do not care to have the content copied over. Any suggestions?

    My iPod touch is synced to my old Mac and I have a new PC. Now when I plug my iPod into the new computer it will make the connection sound, but will not show up in my iTunes. I do not care to have the content copied over. Any suggestions?

    Start here:
    iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows

  • MacBook loses wireless connection when iPod touch connects to network

    hi
    ever since upgrading to 10.5.5. on my MacBook i've had the "intermittent network connection" problems that have been described and discussed (without any real solution from what i can see) in another thread.
    PROBLEM: every couple of minutes my MacBook loses connectivity to the network - the AirPort icon still says that i'm connected, albeit with one less bar than before, but i can't connect to anywhere, not even to the wireless router - and to re-establish a connection i need to switch off AirPort, switch it back on, it will then reconnect, and after two minutes or so i have to do it all over again because the network connection drops again.
    NOVEL OBSERVATION 1: reinstalling the 10.5.5. combo system updater helped somewhat. i used to get an error in system.log about there being too many state transitions on the wireless network and about network traffic reduction measures being taken to overcome this problem, but after reinstalling the 10.5.5. combo system updater this message never appears in the logs and I get kicked off only sometimes (see what i say in point 2 below)
    NOVEL OBSERVATION 2: now my MacBook will only lose its connection to the net if i switch on my iPod Touch and switch its wireless interface on. in fact, the only way to avoid the MacBook getting constantly disconnected is to make sure that the wireless interface on the Touch is switched off in the Touch's system preferences; if I just sleep the Touch (top button) without switching off its wireless network interface first in its System Preferences, then the MacBook will keep disconnecting even while the Touch is in sleep mode (presumably the Touch keeps polling the network or something, even while it's in sleep mode).
    DIAGNOSTIC NOTE 1: I have another wireless device (my Nokia E51, which has wifi capabilities) and if I connect it to the wireless interface then the MacBook's connection isn't dropped - i.e. the MacBook only loses its wireless connection when my iPod Touch connects to the wireless network.
    DIAGNOSTIC NOTE 2: I have upgraded my wireless router (before I had a Linksys WRT-54GC, now I have a Netgear WGR614v9) but that has made no difference.
    DIAGNOSTIC NOTE 3: I have also tried altering the router's settings (i have played around a_lot with this, trying every combination I could think of - e.g. staple down particular devices to particular ip addresses, use only 802.11g versus automatic b/g, etc) but that has made no difference either.
    RANT:
    The only thing that prevents these disconnections from occurring is to keep the iPod Touch's wireless switched off, which ***** because if I'm in the kitchen I can't have it switched on to monitor my email (yes, I've no life, i hang around waiting for emails), or if I go have a lie down and want to check out stuff on the net, or to browse the iTunes music store or whatever, then I know that my connecting my iPod Touch the computer will be disconnected.
    This obviously *****, right? And a lot of people are having wireless problems with their MacBooks, right? And these problems seem to have been around for over a year, right?
    So why hasn't Apple solved this problem yet? Or am I just being melodramatic?
    Your thoughts on any or all of the above, or flames if that's your preferred method of communicating, are invited. =)
    Cheers
    dr.colekat

    Having the same problem here. As a first time mac user, Apple has certainly made a bad first impression.
    For me, the issue seems to occur when transferring files between computers that are connected to the same access point (when transferring files from wired computers on the network there is no issue). My vista laptop and every laptop I have tried has worked perfectly fine with this access point so I am 100% convinced it is the mac. Basically when I copy the files, after about 100mb, I am unable to access anything on the local network or internet until I restart Airport. The weird thing is that even though I am unable to access anything, the airport utility says it is connected. I might also note that the wireless signal strength is full.
    If I can't get this figured out in a few days, this computer is going back to the store where it came from and I will officially label myself anti-mac. This type of issue is just unacceptable for something so main stream.

  • Hello! I bought an iPod touch 3rd gen at a pawn shop and when i tried to set it up, it would not connect to my iTunes OR Wifi so that I could finish set up. Is there anything I can do to fix this before i take it back and get my money back?

    Hello! I bought an iPod touch 3rd gen at a pawn shop and when i tried to set it up, it would not connect to my iTunes OR Wifi so that I could finish set up. Is there anything I can do to fix this before i take it back and get my money back?

    Take it back for a refund.

  • My ipod touch is disabled for 22 million   minutes and it won't connect to itunes what can i do?

    My ipod touch is disabled for 22 million minutes+ and i have seen videos where it says to connect it to my laptop and restore it but it says "itunes cannot connect to the ipod because you need to enter the password" obviosly i cannot do this because it is disabled for 22 million minutes+ . please can someone help me.

    light-blue text is a link click on it
    Recovery mode

  • How can you get your ipod touch open when you forgot the password and its disabled and not connected to wifi

    How can you get your iPod touch open when you forgot the password and its disabled and not connected to the Internet Connection and you don't want to reset it.

    Disabled
    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Forgot passcode or device disabled
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:                                                             
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: Back up and restore your iOS device with iCloud or iTunes       
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:                         
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        
    If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.

Maybe you are looking for

  • File not found, Missing resource bundle

    Hi I have a problem in accessing files (XML and Resource bundles) in Java projects. I used to access these files in WD Java. The same piece of code does not work here. e.g. When I create a new file object by providing the path name I get a file not f

  • Fuzzy External Display

    Hi all, I just purchased a new 13" MBP and a 23" Dell display to go along with it. The display runs at HD resolution (1920x1080), and I have it connected to my computer via DVI. However, the image looks a little fuzzy, and fonts, especially small one

  • CCS and IC WebClient interaction

    I can login into IC WebClient and CCS successfully, but when i check the Agent status in CCS, it give me msg 'Currently no agents are logged on to CCS '. So i can't simulate telephony. Does anybody know what's the reason and which additional settings

  • Drill-down lost in Report Builder

    Ever since the CFMX7.02 upgrade, we have lost the ability to drill-down on the Report Builder reports which previously had drill-down capability. I am referring to summary lines which contained a link to the detail. Has anyone experienced this and is

  • Kann man eine benutzerdefinierte Tab-Reihenfolge fixieren?

    Hallo, ich habe im Adobe LiveCycle Designer ES, Version 8.2, einen 18seitigen Vordruck erstellt. Um den Vordruck bedienerfreundlich zur Verfügung zu stellen, habe ich eine benutzerdefinierte Tab-Reihenfolge gewählt. Bei jeder Änderung im Vordruck, wi