Ipod touch does not work after I downloaded 2.0

this evening i noticed there was a new new download with new apps and I spent the money to download it. while it was downloading there was a part about backing up my ipod . well appearantly there was an error and I went on to click continue assuming i would jsut have to relaod music and contacts and so on and so forth. well after the download was complete I connected it to i tunes and it shows up but i can't do anything from there. I unpluged it and pluged it in, tried apples 5 r's and now itunes does not even recognize my i pod is plugged in! any suggestions

Hey!
You might get some joy with this......
iPod Touch won't start up
See Skwarks post to use Recovery Mode.
Cheers,
John

Similar Messages

My Ipod touch does not work properly.When i charge it,it only works for 5 min.n gets discharge.I showed it to the apple store in banglore n the person told me its fine n It is working properly.Bt its not working properly.Can someone help

My Ipod touch does not work properly.When i charge it,it only works for 5 min.n gets discharge.I showed it to the apple store in banglore n the person told me its fine n It is working properly.Bt its not working properly.Can someone help

If after you charge it for about three hours and it only last about five minutes the battery is probably dead or there could be another hardware problem. I would go back to the Apple store and ask them specifically how can it be OK if the fully charged battery only lasts five minutes.

Brand new IPOD touch does not work w Bose speaker docking station is there anything that needs to be done?. The Nano that I have works fine.

My new Ipod touch is not working with my Bose Speaker docking station. My Nano works fine.
Any reasons for this?

Does Bose say it will work with your model iPod and iOS?
Does it appear that the iPod fully seating in the dock?

HT1665 downloaded to 6.1.3 ipod touch does not work with previous working sound docks

Downloaded 6.1.3 and IPOD does not work in previous working sound docks. Cannot charge inthose docks now either. They worked fine before download

Reset the dock
See if there is a firmware update available for the dock
Sometimes tyhis works:
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync all music and resync
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
Sometimes an iOS update breaks compatibility and y havet wair for a firmware/iOS update

Brand new ipod touch does not work

Brand new ipod does not work will not sync or power up.

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Ipod touch does not work with hex from sharper image

I just bought an ipod docking/speaker from sharper image (Hex) for my ipod touch. My ipod does not work on it. I have also had problems playing my ipod touch music on ihome products - works on some but does not work on others. Is it my ipod touch. thanks.

Some docks are not compatible with iOS 5. Ceeck with the manufacturer. Other users have post problems with iOS 5 and iHome docks too.

My 4th gen iPod Touch does not work with Ford sync since updating OS

When I updated my iPod to the new os, it does not work with my ford sync system anymore. how do I fix this?

Have lots of issues with Fords MySync and here's some info that might help....
Using ford sync interface, goto the phone section, then settings, and look if your iPhones name is listed, if so select the phone name thru sync interface and remove/delete it from the sync list, then go thru the Bluetooth pairing process again.
If that doesn't work, do the same on the iPhone, select ford sync entry in Bluetooth and remove sync or forget this device on the iPhone and then go thru Bluetooth pairing again.
If that doesn't work Power off iphone ( not sleep) hold power button till you see red slider to power off. Then restart iphone, try pairing up again.
If that doesn't work go back to MySync and goto phone settings and use the up-down slider till you see sync master reset. Confirm then go thru BT pairing again.
If that doesn't work there is a fuse for the my sync system. Fuse box is usually behind kick panel of front passenger seat side for the Mustang #3, its behind a paper black cover. Remove fuse for 5-30 secs then replace.
Lastly, make sure your MySync Firmware is the latest vers. Mines 4.0.2 goto fords MySync support page to check
http://www.ford.com/syncmyride/
or call 1-800-392-3673 Opt 3
A google search might help for your model and year if not a newer mustang and you couldn't get to ford.
Good Luck

Lightroom does not work after the download

I bought and downloaded Lightroom 5 and it does not work. It does not allow me to do anything. It looks like it is not activated. I have downloaded it 2 times and still have the same problem.

You need to provide system information and explain what exacxtly isn't working.
Mylenium

IPod touch 5 not working after updated to iOS 8.3

ipod touch 5th gen isn't working after I updated it to iOS 8.3. After it finished updating, the iPod wouldn't turn on and wouldn't charge. I've had it for over 2 years. the iPod isn't charging and is only displaying the dead battery icon. I have tried everything but it still isn't working.

See what you missed here:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Help! My iPod touch is not working after I dropped it!

I have the iPod touch 4G. I was sitting down, and when I stood up it fell out of my pocket and onto the tile floor. It feel on the back of it while wearing it's case (a paul frank one that's 2 weeks old). It's screen has been smashed before, but I had it fixed, and it's been working great since. I tried plugging it into the charger, holding down the power button, and holding down the power and home button together. Can anyone give me some advice on what I should do or what might be wrong?? I've had it since about Christmas.
Thanks!!
SockMonkeyLove

See the not-charging topic of:
iPod touch: Hardware troubleshooting
Have you tried another cable?
Another charging source? Does iTunes see the iPod when you connect to your computer?
Look at the dock connector on the iPod. Look for abnormalities like bent or corroded contacts, foreign material and cracked or broken plastic.
An appointment at the Genius Bar of an Apple store would be next.

IPod Touch Screen not Working after using Assistive Touch

Hey everyone!
Yesterday my iPod Touch 4th gen touch screen froze (not the screen itself - it still wakes from sleep & responds to notifications and charging etc.), after myself accidentally taping 'Voice Control' on Assistive Touch.
I was wondering, since it's out of warranty (it's a couple of years old), I can't send it back. I'm currently backing up & restoring it.
Can anyone tell me if it's the software or hardware? It's going to take at least a good day or so to backup & restore, due to storage is full, and it's 32GB capacity, so it'd be good to know in advance.
And if anyone has got any other suggestions to fix it, please let me know! It'll be much appreciated.
Thanks heaps!
PS. Please don't tell me to repair it...it'll cost just as much to fix my whole iPod, buttons & screen than it is to buy a brand new one!!

There is really no what to know if hardware or software problem without trying to restoring the iPod. First from backup and then to factory settings/new iPod. If still problem then it is a hardware problem.

Macbook pro ipod nano does not work after plugging in

I plugged in an iPod nano to my MacBook Pro which has two operating systems, one is OS and the other is Windows. I don't know which generation the iPod nano is. The PC side of the MacBook Pro is working but the OS side is not working. It allows me to login and then shows a blank white screen with the pointer cursor.
The iPod nano was plugged in to add music from iTunes. I plugged it in, opened iTunes, and the iPod nano was not recognized on iTunes or on the computer in Finder. I unplugged the iPod nano and closed iTunes. When I opened iTunes again, it gave me an error and will not open iTunes again. I restarted the computer and this is when the OS side stopped working and the PC side continued to work. I was able to load OS in Safe Mode though.
Does anyone have any suggestions? Please help. Thanks!

I had the same issue...of course i went swimming with my iPod but still. If it is the battery that is giving you trouble then go back to your local apple store or call them. Ask what the most reliable place for iPod repair is. A second option (what I did) is to go into the iPod recycle program. They take your old iPod and either give you a discount on the new one of the same style or a discount on a new one of the 3rd gen. I recomend the first option if your iPod is unused.

My ipod touch does not work properly please help me get through this

My ipod touch (5th gen) dosent connect to itunes or app store or find my iphone even if i go to settings to logout and login it still dosent work can someone help me on this please

Never mind it worked now thanks

The microphone on my iPod Touch does not work anymore :( what should I do ?????

Hi , my iPod is awsome,but the microphone doesnt work and i dont know what to do also before i did have probleme with my iPod but ive find a way on itunes to fix it !!! And when i talk on memo we can see that it wont get up more then 20 level !!!!

- Make sure the mic hole is unobstructed. It is the little hole on the back side of the iPod by the camera lens.
Try:
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iPod.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

Ipod touch still not working after restore

stuck on apple screen even after restore!!!!!!

Have you tried the suggestions here:
iOS: Not responding or does not turn on

Ipod touch does not work after I downloaded 2.0

Similar Messages

Maybe you are looking for