IPod Touch drawing too much power--disabling USB ports

Hi there,
I have a brand new Macbook, just picked it up less than a week ago. I've been hooking up my 2nd gen iPod touch to it for a while without any problems, but suddenly I started to get an error message every time I plug it into my USB port:
"*Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled.* To prevent damaging your computer, the USB device drawing too much power has been disabled. Other devices may also have been disabled. When you disconnect the device drawing too much power, your other USB devices will be enabled again."
I've been looking all over the internet for a solution to this and I can't find a thing--it's really frustrating since this laptop's brand new and I have no other way of charging my iPod.
My laptop is plugged in while I'm doing this. The error message is instant--it seems to pop up before I've even inserted the USB cable all the way. Also, for what it's worth, I just did a test and I get the error message just by plugging the USB in, even if it's completely unattached to anything.
Thanks, looking forward to a solution.
Message was edited by: stenzelwa
Message was edited by: stenzelwa

Had the same where as soon as i Plug my iPhone into the USB Port on my 2009 "Macbook Pro"
"Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled. To prevent damaging your computer, the USB device drawing too much power has been disabled. Other devices may also have been disabled. When you disconnect the device drawing too much power, your other USB devices will be enabled again."
(This is a Simple Fix)
Just Change the USB Cable.
I Just Happened to have a New USB/iPod/iPhone Cable Laying Around, so i Connected it and "Voila" everything was back to Normal.

Similar Messages

IPod Nano Drawing Too Much Power From USB Port

My daughter plugged her iPod into the USB port of our iMac today, something she has been doing for months and months, and yet this time she was greeted with an error message telling her that something was drawing too much power from the USB port, so my iMac was shutting down that port. I moved the iPod to another port -- same error message. I moved the iPod to another iMac -- same message. So I am confident that the culprit is the device and not the computer. Any ideas on how to resolve this issue? The iPod is an iPod Nano 7th Generation (current model).

My issue has been solved. The USB cable was bad. I am unsure how to remove my question from the forum ... sorry for taking up anyone's time.

Ipod Touch (2nd gen) drawing too much power, disable USB?

Earlier today, when my iPod Touch (2nd gen) was syncing with iTunes, it disconnected and this error message popped up:
Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled.
To prevent damaging your computer, the USB device darwing too much power has been disabled. When you disconnect the device drawing to much power, your other USB devices will be enabled again.
Now, my Ipod will not sync or charge. I've tried connecting other USB devices (cell phone, wireless mouse and ehd) and get the same message. I've tried a few suggestions online like: restarting/shutting down the computer, restarting the IPod, resetting the SMC, PRAM and NVRAM. None of these worked. I've connected my iPod to my roommate's iMac and it connected with no problem. Is there anything else I can do before using the Genius bar?
Macbook Pro 5,3
Intel core duo
4gb memory
ipod touch 2nd gen
firmware 4.2.1

You have a MacBook problem since it happens with all your USB accessories. I suggest you post in the MacBook forum. I do not have a MacBook so I have no ideal about the problem.

Mackie Control Pro drawing too much power from usb?

I have a Mackie Control Universal Pro connected to my 2.8GHz Intel Core 2 Duo with 4GB rom, running OSX 10.5.4.
When I first hooked up my Mackie Control Pro (about 1 year ago) it worked perfectly. A bout 2 months ago my computer wouldn't recognize it anymore. I keep getting this message telling me the device is drawing too much power from USB port and due to that it will shut down that specific port.
My MCP is plugged to the electrical outlet and shouldn't need to be drawing power via the USP. I tried disconnecting all other devices hooked up via USB and Firewire beside the keyboard and mouse but same massage keep coming.
I checked the MCP to make sure the electrical wire was plugged in properly and supplying it with power, I also tried hooking it up with different USB cables via different ports but problem still there.
Can anybody help me out please this is starting to be a big head ache. Any help would be great.

Not 30 seconds after submitting the question I did just that. I felt stupid not thinking of that simple check. Thanks for the quick reply. It worked just fine with another cable. It appears we need a new cable for my daughter....
Thanks again.

Why is my iphone 3g drawing too much power through USB?

I'm getting an error that my iPhone 3G is drawing too much power through USB and the computer shuts the port down. I've tried it on PC & Mac, same thing both times. Won't charge on wall charger or iHome either... I've tried turning on/off & resetting, but still won't charge. Ideas?

just wondering ... did anyone figure out the problem where when you plug the iPhone into the computer it says that the USB Device is drawing too much power? any help would be appreciated.

Constant error message: USB drawing too much power - no USB plugged in for weeks?

Starting about two days ago, I've been getting error messages about every 30 seconds saying that a usb device is drawing too much power, and my usb device has been disabled. I haven't had anything plugged into the usb ports for about 3 weeks, well before I started getting this error message. At first the error messages came up one at a time, but now about 5 of them pop up every 30 seconds..
There seems to be no visible damage to either of the usb ports, and I've updated software and restarted it too. Can anyone help me figure out what's going on?

If SMC and PRAM resets do not correct the problem, make an appointment at an Apple store genius bar for a FREE evaluation.
http://support.apple.com/kb/HT3964
http://support.apple.com/kb/ht1379
Ciao.

IPhone 2G random defect - "drawing too much power on USB"

Good day,
About three weeks ago, my iPhone - which then still had firmware 1.1.4 - lost almost all its charge and "died". It looked impossible to get it charged, the red battery icon was the only thing it showed. Only thanks to a tip from another forum I managed to "revive" the phone: I left it connected to the wall charger for 9 hours, then switched it on simulating a DFU-restore.
I then did a complete re-install of the iPhone's software (did it twice just to be sure) upgrading it to 2.0 and subsequently to 2.01 which is on the phone now.
Starting last week, occasionally when I want to sync or to simply load the battery of my 2G iPhone (now with firmware 2.01), my MacBook Pro answers with the message "A usb device is currently drawing too much power" and then disables the port. I eliminated the doubt it could be a hardware problem, using three different USB cables and four different Macs: the problem presents itself everywhere.
Interestingly, 2 out of 10 times I am successful when I connect the iPhone via USB to the MacBook, eg right now it is charging and I did a sync.
I think the two events are somewhat connected. Apple Phone support says the event is "strange" but since the phone occasionally works, it is impossible to get the phone changed.
I would appreciate any idea about this. Is this a hardware problem or a software or formware thing? Or something else entirely?
Thanks very much

just wondering ... did anyone figure out the problem where when you plug the iPhone into the computer it says that the USB Device is drawing too much power? any help would be appreciated.

WD Legacy External Hard Drive "Draws too much power from USB"

I have a nice MacBook Pro running Leopard, a year or so old and I've never had any issues with it. I used a WD Legacy 250GB External Hard Drive for Time Machine to back up all my stuff. It has its own power source, and the USB cable works fine because I use it with my printer all the time. However, even with both the laptop and the hard drive plugged in, my laptop automatically disconnects the hard drive because the "USB is drawing too much power".
It didn't happen when I initially backed stuff up on it, and it plugs in and works fine with a desktop. Is there any way to disable the automatic disconnect for drawing too much power through a USB? I don't understand how that's even possible because the external hard drive has its own power source, and I just want my stuff backed up. I could care less if it ***** the charge out of my laptop for a few minutes if that means it will work. I've considered getting a powered USB HUD, but wanted to get everyone else's opinion first. Thanks!

Contact the manufacturer. I think the power pack for the drive is not functioning properly.

I have the latest mac desktop op mountain lion,plugged in the canon pixma ip90v and get a message drawing too much power from usb and it won't work?

I cannot get the canon pixma ip90v to work with the computer.I get a message about drawing too much power from the usb.

You need to plug in the power cord that was included with the printer and then use it with USB, or use the power cord included with the printer and access it wirelessly from your iMac. I access my Canon MP560 wirelessly from my iMac, which works well.

Ipod classic drawing too much power message on macbook pro

Hi all,
I have done a search for the answer to this question on many forums but have not quite found the answer for me. I have a Generation 4 ipod classic and I am trying to connect to a 2009 Macbook pro.
The ipod charges fine from a wall power outlet, turns on powers up and everything looks as it should. I have nothing else connected to my usb ports. I have tried 3 or 4 different usb cables including a brand new genuine apple one and after market ones. I do not have the original cable for it. I have connected an ipod touch and an ipod Shuffle to the same usb port / ports with different cables and all ports and all cables work perfectly fine.
This leads me to believe that there is a particular cable needed for a 4th generation ipod classic, does anyone know if this is the case at all? Or that there is a fault with my ipod.
Any help will be greatly appreciated.
Thanks

Not 30 seconds after submitting the question I did just that. I felt stupid not thinking of that simple check. Thanks for the quick reply. It worked just fine with another cable. It appears we need a new cable for my daughter....
Thanks again.

Thumb drive draws too much power on keyboard port

My keyboard supported usb thumb drives in the past. Suddenly it is giving not enought power errors if I insert thumb drives, iPhone or iPod into either of the ports on the keyboard. These devices work just fine if plugged into the computer.
Has anyone had this problem or solved it?

I remember when I bought the Camera Connection Kit for my iPad2, there were several undocumented functions that you could do with it besides just transfer image files from a digital camera. I think you could hook up a wired keyboard to the iPad (and use it), and attach USB sticks, and they worked. But, then came an iPad update, and all that extra stuff miraculously stopped working, to be replaced with the "insufficent power" error message.
I finally found a blog posting that said they had changed a power consumption number in a single line of code and this stopped all the extra things from working. Something like changing a number from 50 down to 20 somethings.
I seem to recall that their explanation for dumbing down the undocumented functionality was that these extra devices would decrease the battery life of the iPad. Hmmm... I come from the PC environment where we say, "Well, let me make that decision and not you!"

"A USB device is currently drawing too much power"

I know it's a long post, but I just want to describe everything I've tried to do to solve the problem, so we can cut right to the chase
Yesterday I got this message when I plugged in my external harddrive (which is working properly btw): "A USB device is currently drawing too much power. The port it is attached to will be deactivated."
Today I haven't seen the message, but the USB port next to the Shift key on my MacBook isn't working very well.
Well, actually it works when I plug in my other external harddrive (which isn't usb-powered). So it seems that there's nothing wrong with the USB port itself. It just doesn't have the power it used to.
My USB-dongle from Cubase works fine. I tried another USB memory stick - it flashes very lightly and it won't mount. The other USB port - the one next to Caps Lock - works fine and it can even provide power enough for my MIDI keyboard and external soundcard.
I've tried resetting the PRAM/NVRAM and the SMC as people often suggest when this problem is described, but it doesn't help.
I've tried to do a full system check, and it says that there's no hardware errors.
I can imagine, that some would assume that the USB port is fried - but it can't be when the externally powered harddrive works fine when using the port.
I think is has to be some sort of software error. Is it possible that when OSX tells that "The port it is attached to will be deactivated" then the port needs to be reactivated somewhere?
I'm really looking forward for your answers

I don't know if this helps but...
I have five 24" iMacs in a education lab that keep telling me "USB Current Overload," even though only the Apple keyboard is attached. It seems they starting giving me the message the first time I turned them on. However, after a great talk with an Apple Tech person, we deduced that it must be a driver I installed on the five machines. We came to this conclusion because when I boot the machine from the OS CD, the problem doesn't happen. When I reboot from the hard drive, the message incessantly pops up, even with just the keyboard and mouse (that it came with) plugged in. On one machine in particular, the message pops up so many times that I can barely use the machine.
I have installed two external devices driver's on this machine, a Novation ReMote Compact SL driver and a TC Electronics 24 D firewire driver. I also have "frozen" these machines using DeepFreeze, which keeps students from installing things or chaning settings. My assumption is that one of these drivers is causing the bogus message. Since the computer works fine when booting up from the OS CD, this is the only thing that could be happening. Some other driver is causing the machine to think a USB device is drawing too much power. At least, I think this is what is happening. I'm still working on fixing this problem, but have not been successful yet with removing drivers.

FOR GURUS: Over Current Notice - USB device drawing too much power

Hi,
When I plug a USB extender cable to any USB port on any Mac tested so far, I get the warning:
"USB Over Current Notice. The USB device is currently drawing too much power. The port it is attached to will be deactivated".
In fact, that freezes the Mac mouse and keyboard until the USB extender cable is unplugged, and renders the used USB port unusable until the next restart.
What is going on? Such extender cable worked fine until Virtual PC was open with Windows XP XP2 in safe mode on an iMac G5 (20-inch) with Mac OS X 10.4.3. A 1GB flash pen was inserted, and its files were seen via "My computer". Then the flash pen was taken out (without properly ejecting it via Windows) and someone inserted a 2.2 GB USB hard disk, which froze the Mac and caused the reported problem from that moment.
So it seems that the USB cable is now somehow defective, but I wonder if it could be fixed, since it does not seem to have any internal circuit but just the USB connectors and cables. So I wonder what is going on...
Thanks.

¡Hola, Gabriel!
USB Overcurrent Protection issues arise when one or more of the USB devices draw too much power or, by adding a device to a USB hub, one exceeds the current budget for the entire chain. A detailed explanation can be found in this article, where it states:"Should the cumulative current drawn by a group of downstream ports exceed a preset value, the overcurrent protector removes power from all downstream ports. Overcurrent circuits are used to protect against catastrophic device failures, software errors that lead to devices turning on when the current budget has been exceeded, and user-caused events such as the shorting out of connector pins."See also "USB: Hub Description" for important information on self-powered vs. bus-powered UBS hubs.
Your Apple Pro keyboard is a bus-powered USB hub. Some displays continaing USB ports may act as either bus-powered or self-powered hubs: one has to consult the display's documentation for details.
• If USB Overcurrent problems arise using a bus-powered, third-party USB hub, try a self-powered hub or connect the USB device directly to one of the built-in USB ports on the computer itself.
• If USB Overcurrent Protection issues arise when a device is connected directly to one of the built-in USB ports on the computer itself, then the peripheral device or its cable is either damaged or defective.
Note that you can not put two bus-powered hubs in series. In addition to the article "USB: Hub Description", see also "Apple Pro Keyboard: Devices Connected to Hub May Not Work."
Good luck!
Dr. Smoke
Author: Troubleshooting Mac® OS X

External HD claims to be drawing too much power, after 2 months of working

I have a 2.5" external HD enclosure from Mad Dog Multimedia that uses two USB connections, one for data and one for power. It's been working fine with my new Macbook Pro since I bought it several months ago, and continues to work fine with other comptuers. Last night I got a message that it was drawing too much power and the ports would be shut off. I unplugged and replugged it, and it continued to work all evening. This morning however, no matter what I do, it continues to tell me that its drawing too much power. This is baffling to me, because it has worked for the last few months, and still works on other computers, leading me to believe that something is wrong with my USB ports. Unfortunately I don't have much in the way of other USB devices I can use to test this hypothesis. Has anyone else encountered similar problems, and have you been able to resolve them successfully?

In the event you haven't done this already, shut down the computer and remove the external drive. Wait at least one or two minutes. Restart the computer then reconnect the external drive. See if your problem is resolved.
Try repairing the hard drive and permissions:
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger and Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation complete. I also suggest you run Repair Disk on the external drive as well while you still have DU running. Now quit DU and return to the installer. Restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger, and 4.1 for Leopard) and/or TechTool Pro (4.6.1 for Leopard) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
If the above does not work, it is possible there's a problem with your OS X installation. It's difficult to know what that may be so you will need to experiment. First, restart the computer in safe mode. If this doesn't result in the problem ceasing, then try creating a new user account. Log out of your account and log into the new one. If this doesn't result in the problem going away, then more extreme measures are needed: reinstalling OS X. You might give this a try:
How to Perform an Archive and Install
An Archive and Install will NOT erase your hard drive, but you must have sufficient free space for a second OS X installation which could be from 3-9 GBs depending upon the version of OS X and selected installation options. The free space requirement is over and above normal free space requirements which should be at least 6-10 GBs. Read all the linked references carefully before proceeding.
1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported, then quit DU and return to the installer.
2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update.

I am having a problem when I plug my iPod into my macbook. When I plug the cable into my mac I get the following message - "Because a USB device was drawing too much power from your computer, your USB device has been disabled." PLEASE HELP!

I am having a problem when I plug my iPod into my macbook. When I plug the cable into my mac I get the following message - "Because a USB device was drawing too much power from your computer, your USB device has been disabled." CAN SOMEONE PLEASE HELP!

The rest of the message in the pop up window says "To prevent damaging your computer, the USB device drawing too much power has been disabled. Other devices may have also been disabled. When you disconnect the device drawing too much power, your other USB devices will be enabled again."

IPod Touch drawing too much power--disabling USB ports

Similar Messages

Maybe you are looking for