Ipod touch factory reset error, now won't respond

I was resetting my Ipod touch 2g to factory settings, selected not to back up old info, and halfway through the restore itunes gave me an error message and quit the restore. Now my Ipod is stuck on the 'connect to itunes' screen, which it will not leave, and is not recognized by itunes nor My computer. I've tried restarting itunes, my computer, and numerous other things, all unresponsive. Can anyone help? I run the newest version of itunes on Windows 7.

Without knowing what the error message said all I can suggest is:
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Similar Messages

  • IPod Touch Factory Reset Question

    I have a 4th Gen iPod touch that I bought at a pawn shop. It is password locked and none of the factory reset methods online have worked (I believe the Home button may be broken).
    Can it be forcibly factory reset if taken to an Apple Store?

    Place the iPod in recovery mode using one of these programs and then restore via iTunes:
    For PC
    RecBoot: Easy Way to Put iPhone into Recovery Mode
    If necessary:
    Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
    and                         
    RecBoot tip
    For MAC or PC       
    The Firmware Umbrella - TinyUmbrella

  • My 3rd generation ipod touch shut off but now won't charge and is not recognized by my computer. All it shows is the black screen with the apple logo. It did this once before and after letting it sit for a day it charged. I tried this again but nothing.

    My ipod touch 3rd generation shut off when the battery died.  When i tried to charge it but it would not charge and it wasn't recognized by my laptop. This happened once before and it charged after sitting for a day. So I tried it again but it didn't work. I don't know if it is still covered, I got it last july as a replacement for one that broke. Help!! Please!!

    Try:                                               
    - iOS: Not responding or does not turn on           
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable              
    - Try on another computer                                                       
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • IPod touch attempted software upgrade now won't work

    Purchased used iPod touch 8gig USB connect to iTunes on my g4. Gave me a software update choice which I accepted, then after several attempts will no longer show in iTunes and keeps the USB to iTunes logo only on iPod. Any fix? I know the local apple store will want more than a new one. Any suggestions?

    Other users of 1G iPod (or any iPod with iOS 3.x) have experienced the same problem within the last couple of days. It appears that Apple updated the App store website to cause this problem. For the time being you just have to download them to your computer and sync them to your iPod.

  • IPOD Touch Screen zoomed in and won't respond

    My screen zoomed in and is so large that I can't get the slides to respond to open or shut down. I have done the restore and reinstalled some music but that didn't solve the problem.  It only responds to voice command, it won't shut down because I can't slide the button across and when I can get into the system, the screen only shows me a small part of the topic and it won't move so I can't access anything.  Any ideas?

    - Double tap the screen with three fingers and go to Settings>General>Accessibility and turn off Zoom and Voice over too if you want.
    - Alternately, you can connect to your syncing computer and go to the Summary pane.  Click on Configure Universal Acess and turn off Zoom and Voice Over (if you wish).

  • HT1695 i bought a used ipod touch and reset it to the factory settings via itunes and now i'm trying to set it up like new and it won't let me sign in with an apple id it says it can't connect to the server.  Other wireless devices are working HELP?!

    I am trying to set up  my daughters ipod touch after resetting it to factory settings.  So I am trying to sign in using an apple id.  It says won't connect to the servier, but I have other wireless devices connected, so I know my wi fi is working. What now? Thanks

    Return it and get a refund. Without the prior owner's Apple ID and password that device is useless. Find My iPhone Activation Lock- Removing a device from a previous owner’s account. You were screwed by the ignorance of the pawn shop owner.
    <Edited by Host>

  • I made the mistake of resetting my iPod to factory defaults. Now it will only partially sync to my music library. I continually get an error message saying that certain songs are not authorized for my computer. Any ideas?

    I made the mistake of resetting my iPod to factory defaults. Now it will only partially sync to my music library. I continually get an error message saying that certain songs are not authorized for my computer, although they are in the iTunes library on the computer and will play. It's these songs that won't transfer to the iPod. I have deauthorized and re-authorized the computer but no joy. Any ideas?

    Hello there DesertRat71,
    I was thinking that some of the songs in your library may have been purchased under a different apple id. You have already done the first thing I would have done by de authorizing and re authorizing. To verify this, highlight one of the songs that will not sync over and use File>Get Info. Here is the help menu link for it if you need it help://bookmark='https://help.apple.com/itunes/mac/11.0/help/index.html?localePa th=English.lproj#itns2937'
    In the Summary section there will be an Apple ID entry. If it shows something different than what you are currently using then I recommend signing into the Apple ID it shows and authorizing the computer for that one as well.
    All the best,
    Sterling

  • TS1702 Went to update apps on ipod touch IOS 4.2.1. I did a factory reset. Now I can't get most of my apps back because I can't download version 5.0. I paid for some of these apps.

    Went to update apps on ipod touch IOS 4.2.1.  I did a factory reset and now I can't get most of my apps back & can't download version 5.0 which I need to get back some of my apps. I paid for some of these. I've tried my backup and it didn't put them back on.

    If your iPod Touch is too old for iOS 5 or later... there is not much you can do.
    When/if you get a later model iDevice you will be able to Download Past Purchases using the Original ID that made those Purchases. (providing they are still supported by the Developer)
    See Here  >  Download Past Purchases
    http://support.apple.com/kb/HT2519

  • HT201274 So I have tried to update my iPod touch about 5 times now and it still says there is an error. I,ve erased all my settings and attempted to restore it, but it wont let me. I'm ready to throw it away and find a new product.

    So I have tried to update my iPod touch about 5 times now and it still says there is an error. I,ve erased all my settings and attempted to restore it, but it wont let me. I'm ready to throw it away and find a new product

    Errors when updating leads to corrupt system files and this may be your problem. If you're using windows, connect your device to PC and run any third party app like Syncios. If it detects, you maybe in luck and try to back-up your data if possible. I hope that it won't and if doesn't, there is no other way to recover files. You should be restoring with iTunes and all data will be erased, or else your device may become unusable.

  • I have a 4th gen ipod touch. i reset all settings and it has not restarted now for 8 hours. On/ Off switch is not working. How do I restart my Ipod Touch?

    i have a 4th gen ipod touch. i reset all settings and it has not restarted yet. it has been resetting for about 8 hours now. It won't let me restart the iPod touch. the loading screen just keeps running.

    Hi paul.lisa,
    Then when you press down on one of those icons (on the actual Home screen), and all the icons start to wiggle, a small black "x" should show up in the upper left-hand corner:
    Cheers,
    GB

  • Ipod touch was reset to factory

    my sons ipod touch was reset to factory settings now it shows the connect to itunes symbol on the screen but when i connect it nothing happens

    Try:                           
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar                                              

  • I tried to restore my iPod Touch 2nd generation and now it won't sync to itunes.  on the screen it shows the usb end of the cord and the iTunes logo over it.  Is it broken?

    I tried to restore my ipod touch 2nd generation  and now it won't sync to itunes.    On the screen is the USB end of the cord and the iTunes logo over it.
    I have turned it off and on,  held the off button down and  the select button down but it still comes up with that picture on the screen.    Have I broken it?
    Please help.
    Mimi

    It means the device is in recovery mode.  You'll need to reconnect it to iTunes and restore it again.
    You may need to connect it in recovery mode manually using the instructions in this Apple support document.
    iOS: Unable to update or restore
    B-rock

  • Reset ipod touch (2nd gen) and now safari is missing. What now?

    Reset ipod touch (2nd gen) and now Safari is missing. What now?

    Don't despair Look at "Vintapps" in the Apple app store.  It has tons of available apps for all those earlier ios devices.  And you can download them right to your ios device.  Many are free.
    Although I wrote this 99 cent app specifically to help solve this problem, I need to add that "I may receive some form of compensation, financial or otherwise, from my recommendation or link."
    Be sure to keep backups of older software.  Once an app is updated, the older version is no longer available to be downloaded from Apple.

  • Reset ipad, now won't accept my original passcode

    ITunes wasn't working so reset iPad, now won't accept my passcode. Is there a default I need to use? 

    If You Are Locked Out Or Have Forgotten Your Passcode
    iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
    iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
    iOS- Understanding passcodes
         If you have forgotten your Restrictions code, then follow the instructions
         below but DO NOT restore any previous backup. If you do then you will
         simply be restoring the old Restrictions code you have forgotten. This
         same warning applies if you need to restore a clean system.
    A Complete Guide to Restore or Recover Your iDevice (if You Forget Your Passcode)
    If you need to restore your device or ff you cannot remember the passcode, then you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and re-sync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software.
    Try restoring the iOS device if backing up and erasing all content and settings doesn't resolve the issue. Using iTunes to restore iOS devices is part of standard isolation troubleshooting. Restoring your device will delete all data and content, including songs, videos, contacts, photos, and calendar information, and will restore all settings to their factory condition.
    Before restoring your iOS device, Apple recommends that you either sync with iTunes to transfer any purchases you have made, or back up new data (data acquired after your last sync). If you have movie rentals on the device, see iTunes Store movie rental usage rights in the United States before restoring.
    Follow these steps to restore your device:
         1. Verify that you are using the latest version of iTunes before attempting to update.
         2. Connect your device to your computer.
         3. Select your iPhone, iPad, or iPod touch when it appears in iTunes under Devices.
         4. Select the Summary tab.
         5. Select the Restore option.
         6. When prompted to back up your settings before restoring, select the Back Up
             option (see in the image below). If you have just backed up the device, it is not
             necessary to create another.
         7. Select the Restore option when iTunes prompts you (as long as you've backed up,
             you should not have to worry about restoring your iOS device).
         8. When the restore process has completed, the device restarts and displays the Apple
             logo while starting up:
               After a restore, the iOS device displays the "Connect to iTunes" screen. For updating
              to iOS 5 or later, follow the steps in the iOS Setup Assistant. For earlier versions of
              iOS, keep your device connected until the "Connect to iTunes" screen goes away or
              you see "iPhone is activated."
         9. The final step is to restore your device from a previous backup.
    If you can not restore your device then you will need to go to recovery mode.
    Placing your device into recovery mode:
    Follow these steps to place your iOS device into recovery mode. If your iOS device is already in recovery mode, you can proceed immediately to step 6.
         1. Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the other end
             of the cable connected to your computer's USB port.
         2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the
             red slider appears, then slide the slider. Wait for the device to turn off.
              If you cannot turn off the device using the slider, press and hold the Sleep/Wake
              and Home buttons at the same time. When the device turns off, release the Sleep/Wake
              and Home buttons.
         3. While pressing and holding the Home button, reconnect the USB cable to the device.
             The device should turn on. Note: If you see the screen pictured below, let the device
             charge for at least ten minutes to ensure that the battery has some charge, and then
             start with step 2 again.
         4. Continue holding the Home button until you see the "Connect to iTunes" screen.
             When this screen appears you can release the Home button.
         5. If necessary, open iTunes. You should see the following "recovery mode" alert:
         6. Use iTunes to restore the device.
    If you don't see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
    Additional Information:
    Note: When using recovery mode, you can only restore the device. All user content on the device will be erased, but if you had previously synced with iTunes on this computer, you can restore from a previous backup. See this article for more information.

  • I have done absalutely nothing to my 4g apple ipod touch, and it over heats, won't hold a charge, and the front camera will not work. I bought this brand new in december, and i've barely used it. I've tried restarting it and everything, what should i do?

    I have done absalutely nothing to my 4g apple ipod touch, and it over heats, won't hold a charge, and the front camera will not work. I bought this brand new in december, and i've barely used it. I've tried restarting it and everything, I honestly think this is out raging because i spend over $200 on this. To have for music and instagram. I use it about an hour a day, but i've only been using it for about 3 months although i've had it since December. Any suggestions that may help me?

    Try:
    - A reset. Nothing is lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup
    - Restore to factory settings/new iPod
    If still problem make an appointment at the Genius Bar of an Apple store.

Maybe you are looking for

  • Acrobat 9.5.5 Converting word to PDF

    Hello All, I am having a strange issue on a users machine. When they create a folder and rename it, then put  a word document they want into that folder, they are unable to right click and use the "Convert to Adobe PDF" button. What happens is the fi

  • Query on using attribute bindings in popup

    Hi, Am using Jdev 11g. Data controls are created using plain java objects. Use case is as follows: I have a tree table which displays records (Say employee records). Now i select a row in tree table and click "Edit" button. The details for the select

  • Hello World plugin works in 32-bit, does not work in 64-bit

    I created a simple "Hello World" plugin by following the instructions in Adobe's guide: Getting Started with Adobe Illustrator CC Development, which is available as a pdf here. The plugin works in the 32-bit version of Illustrator CS6, but I get an e

  • Import and Copy Opening – One Task & One Prompt Set

      Hi Experts, We want to create one data manager package that contains both import from BW with UI and copy opening. We ran into some issues.  Maybe you can help: We created a new process chain that contains both tasks, and created a new DM package t

  • Drawing from another class

    I have a class Score and in that lcass I have the following method:   * Draw the score to the applet windows   * @param g The graphics object public void draw(Graphics g, int x, int y)   calculateScore();   String stringScore = new Integer(usersScore