IPod Touch Gen 1 Stopped Working

I have an iPod touch generation 1 and it just stopped working. It was working and I plugged it in to finish charging and when I woke up a few hours later it wouldn't turn on. It still won't turn on and doesn't appear in my iTunes. What do I do?

The iOS update made the iPod less tolerent of marginal/fake Lightning cables. All you can do is get a certified Lightning cable. I would get a genuine Apple cable.

Similar Messages

  • HT201263 My iPod touch suddenly stopped working. It was fine, but when I went back the screen had gone black and I was unable to turn it on. It is now unresponsive and my computer does not recognize it when it is plugged in. What should I do?

    My iPod touch suddenly stopped working. It was fine earlier, but when I went back a few hours later, the screen had gone black and I was unable to turn it on. It is now unresponsive and my computer does not recognize it when it is plugged in. I thought it just needed to be charged but there seems to be a larger issue now. What should I do?

    Let your ipod die. Then when it is dead charge it adn turn it back on. After that it should be fine.

  • The voiceover on ipod touch has stopped working.  not sure how i managed to stop it.  Any ideas how I get it speaking again?

    The voiceover on my ipod touch has stopped working.  Not sure what i have done to stop it.  anyone any idea how i get it started again?

    Turn VoiceOver on or off: Go to Settings > General > Accessibility > VoiceOver. You can also set Triple-click Home to turn VoiceOver on or off. See “Triple-click Home” on page 129.
    copied from page 120, ipod touch user guide 5

  • My ipod touch just stop working the screen is blue I cannot re-set it but the time is correct and it keeps up-dating

    My IPOD Touch just stop working - I was listening to music and it stop.  I cannot power it down or re-start it.  The time is correct and that is I can see at the top of the screen of the IPOD along with the battery info

    Try resetting:
    Hold both the home and power buttons at the same time until the Apple boot logo appears. No data will be lost.

  • Ipod touch has stopped working. the screen showes that it need to connect to power.

    ipod touch has stopped working. the screen showes that it need to connect to power.

    Hey there our3goldens,
    It sounds like you are unable to successfully boot your iPod Touch. I would recommend these steps specifically from the following article, named:
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    If the device remains unresponsive or does not turn on (or power on), reset your device.
    Let it charge for at least twenty minutes, then see if it starts normally.
    If there is no image on the screen, press the Sleep/Wake button to attempt to wake the device.
    If the screen displays a red battery icon, continue charging the device until the battery is fully charged. Learn more about charging iPhone and iPod touch, or iPad.
    If the above steps do not resolve the issue, or the if the screen remains black or shows a persistent Apple logo, try restoring with iTunes:
    Connect the device to your computer and open iTunes.
    If the device appears in iTunes, select and click Restore on the Summary pane. Learn more aboutrestoring iOS software.
    If the device doesn't appear in iTunes, try to force the device into recovery mode, and then restore it.
    If the above steps do not resolve the issue, contact Apple.
    Thank you for using Apple Support Communities.
    All the best,
    Sterling

  • My ipod touch just stopped working! how do you restore?

    I was playing a game and my ipod touch just stopped working!  How do you restore it , as of now it has a bright white screen and won't power off or even connect to my computer.

    Try restoring via iTunes. If necessary. try placing the iPod in recovery mode using one of these programs and then restore:
    For PC
    RecBoot: Easy Way to Put iPhone into Recovery Mode
    If necessary:
    Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
    and                                           
    RecBoot tip
    RecBoot may have problems on 64X windows, then try:
    Tenorshare ReiBoot – Enter & Exit iPhone, iPad, iPod Recovery Mode with a Single ClickFor MAC or PC           
    The Firmware Umbrella - TinyUmbrella
    Installs blootware on PC too

  • My ipod 5th gen stopped working.

    My ipod 5th gen stopped working. It suddenly turned off (no logo or spinning wheel) and won't turn back on. It won't unlock or anything, completely unresponsive. My computer won't recognize it and it won't charge. My home button is broke as well. Nothing I do makes it seem to respond  please help pretty please

    Place the iPod in recovery mode using one of these programs and then try restoring via iTunes:
    For PC
    RecBoot: Easy Way to Put iPhone into Recovery Mode
    or
    http://joshuabailey1997.wordpress.com/2010/09/02/recboot-v1-3/
    If necessary:
    Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
    and                                           
    RecBoot tip
    RecBoot may have problems on 64X windows, then try:       
    Tenorshare ReiBoot – Enter & Exit iPhone, iPad, iPod Recovery Mode with a Single Click
    For MAC or PC       
    The Firmware Umbrella - TinyUmbrella
    Installs blootware on PC too

  • My Ipod touch email stopped working after installing Update

    my Ipod touch email stopped working after installing the latest firmware update from Apple what should I do?

    Hi, jewlssch. 
    Thank you for visiting Apple Support Communities.
    If the Mail application will not launch, I would recommend processing any available updates on your Mac Pro and test launching Mail.  If the issue persists, process a reinstall of Mavericks.
    Reinstall OS X
    http://support.apple.com/kb/PH10763
    Make sure to backup all of your data prior to reinstalling OS X 10.9.
    Back up your Mac
    http://support.apple.com/kb/PH11371
    Cheers,
    Jason

  • I own an iPod touch which stopped working...what can I do?

    I own an iPod touch which stopped working and this being a quality team and prestige is that I have to be considered as disposable as so far I have not been able to repair and I am sorry I took some effort for me it . If your business is equally as good customer service and say I can do to solve the problem and my equipment is still functional. Thank you for your attention to this.

    Oredinarily, I would ask if it's still in warranty and, if so, recommend that you contact Apple.  However, you indicated that you attempted to repair the Touch yourself so I suspect that you have voided the warranty.  You might want to try Apple anyway and see what happens.

  • My iPod touch screen stopped working, how do i fix it?

    My iPod(4th generation) touch screen stopped working. Okay so it was fine earlier, my home button does not work so i have been using the assistive button for months, and until earlier today it got stuck, i tried to power it off but it doesn't let me slide to power it off, and it doesn't let me press anything on the assistive menu either, and i'm currently waiting for my ipod to die but it's taking forever since it's battery lasts forever! is there any other solutions you can give me?
    and i was wondering if my ipod has life insurance with apple so if something is wrong with the screen, can i take it for a new one? (my ipod is in very good conditions, not cracked or scratched, just the home button is an issue)
    thanks!

    Try restoring via iTunes. If necessary. try placing the iPod in recovery mode using one of these programs and then restore:
    For PC
    RecBoot: Easy Way to Put iPhone into Recovery Mode
    If necessary:
    Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
    and                                           
    RecBoot tip
    RecBoot may have problems on 64X windows, then try:
    Tenorshare ReiBoot – Enter & Exit iPhone, iPad, iPod Recovery Mode with a Single ClickFor MAC or PC           
    The Firmware Umbrella - TinyUmbrella
    Installs blootware on PC too

  • Ipod touch wifi stopped working

    can somebody please help me.. on my ipod touch 2nd gen software version 2.2 the latest one i have used wifi before and it is simply brilliant.. however today i come home from dinner and i play some games i am chilling with my ipod then i decide to do some web surfing but oh no! safari is telling me no internet connection even though i have full wifi bars next to where it says ipod! what is this?? how can i fix it?? i have turned off my ipod turned it back on reset my settings turned it off some more reset it some more and nothing seems to work!
    this is useless without the wonderful internet!
    please help

    this is the same thing that happened to me all of a sudden my wifi stopped working even though i have full bars on the connectivity. it sometimes works in patches though but only for like 5 minutes, its kind of annoying because if you think it would work and you try it doesn't.

  • MY IPOD TOUCH JUST STOPPED WORKING, I CANT POWER IT ON OR ANYTHING, MY IPOD TOUCH JUST STOPPED WORKING, I CANT POWER IT ON OR ANYTHING

    somebody help me!!!!!  i have had my ipod touch for less that 2 months and it stopped working.  it was working 20 minutes ago but now i cant turn it on or anything.  i tried to hold down the home button and the power button and nothing happens.  HELP PLEASE!!!!!!!

    yes dosent work anymore

  • My ipod touch just stopped working

    My Ipod 4th generation just stopped working - not turning on

    Basics from the manual are restart, reset, restore:
    iPod touch User Guide (For iOS 4.3 Software)

  • Excuse me apple but my iPod touches accelerometer stopped working as well as me losing a movie even though I backed up the file so can I get my movie back, and how can I fix the accelerometer even if restoring it won't work.

    My accelerometer stopped working and I tried restoring it and that didn't work so if there is nothing you can do about this problem then I demand another one free of charge sent to me. For I am one unsatisfied costumer

    You are not addressing Apple here, this is a user to user forum. Here's what you can do:
    Updating your iOS:
    Resolution
    Note: Installing the latest iOS may resolve the issue. Verify the iOS version installed and update if necessary. See these documents for assistance:
    iPhone, iPad, iPod: How to find the software version
    iOS software update page
    copied from iPod touch: Hardware troubleshooting
    Set it up "as new device" without using the latest backup:
    How to set up your iPhone or iPod touch as a new device
    If this does not work, get it serviced: Apple - Support - Service Answer Center
    If you are under warranty you won't have to pay for getting it serviced, if not, see this article about the pricing: Apple - Support - iPod - Repair pricing

  • All the outer buttons on my Ipod touch 4gen  stopped working

    I hadn't had my iPod for a while so the amount of apps I had to update was crazy. I pressed update all and waited. I couldn't do much on the ipod cuz most of the good apps were updating. I waited for about 15 minutes and rechecked my ipod. Most of them were still updating. Only 3-4 had successfully updated. I was becoming restless so I started playing with my ipod. I opened an app and was using it for a while. I got bored and pressed the home button to exit the app but the home button wasn't working. I though it had just frozen. My ipod did that alot but recovered quite quickly usually. So I touched the screen and the app still worked. Nothing at happened to it. I tried the sleep button and that wouldn't work either. The volume buttons weren't working as well. I put it on my carging dock and left it there for a while hoping that the lock scrren would show up but it didn't and now I have no idea what to do. Apple Inc. isn't exactly helping me cux their lines are busy. The battery is full so I thought I might wait till the battery died and then charge the ipod and hopefully it would work again. Please help me!! I don;t know what else to do. All the buttons were working fine then they ALL stopped suddenly.

    Try:                                               
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable       
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • Ipod Touch internet stops working after 2.2.1

    Hey everyone, for a while now, my internet has stopped working on my ipod touch. After the 2.2.1 firmware update, the internet just stopped. I decided to restore my ipod back the the 2.2.1 firmware and the internet started working again. Is there any solutions to getting it to work again for the 3.xx firmwares?

    The only known problems with 3.x firmware and WiFi are related to old router firmware problems. There is nothing inherently wrong with the touch WiFi and the 3.x upgrade did little else than make the WiFi indicator more realistic and the need for up to date routers more important.
    When you get ready to go to 3.x, update your router firmware or replace it with something newer.

Maybe you are looking for

  • Aperture won't launch after Time Machine Migration

    After a hard drive failure, I've just got my system all restored from a Time Machine backup, but when I try to launch Aperture it just fails. Not sure whether there's something obvious I'm not doing, or whether I need to reinstall. The library packag

  • To add a check box in the login screen

    Hi, I need to put a check box in the login screen of CRM below the LOGON button with a message :'I agree with the terms and condition of the System'. Please help.

  • How to convert a .jar file to a .sda

    Hi, I have a login module which is created in the form of .jar file. I was deploying this login module using the Deploy tool(deploy.bat). Now I am looking for deploying my login module using the SDM, which happens to be the recommended mode with NW04

  • RoboHelp 6: Conditional Tag Issue

    It seems that RoboHelp 6 will not publish my project correctly if there are more than 6 conditional tags applied. Help?

  • Finder permission issue

    PM G5 Dual 2.0 OS: 10.4.11 My grandson (who shall remain nameless) changed the finder permissions on an USB external drive. This drive now mounts (a warning shows when drive is disconnected) but doesn't show up in the finder. I can't change the permi