IPod Touch name change after updating to 3.1.1

After upgrading from 3.0 to 3.0.1 itunes changed the name oftouch the touch. Why, and is there a way I can change it back?

I experienced the same bug. What is double irritating is that after restoring the name of the iPod, backup in iTunes was starting from scratch, invoking an entire fresh and very long backup of the iPod.
The 3.1.1 update process was for me the most bug-ridden update yet (and I'm updated from 3.x).

Similar Messages

HT201210 been trying to restore ipod touch for days after updating itunes. keep getting error #9. Tried it on 2 computers, with vista + XP. tried all the solutions posted. nothing is working. Thanks Apple. Didn't have this problem before updating itunes!

Been trying to restore Ipod touch for days after updating Itunes. Error code #9. Stuck on restore screen. Tried all the solutions posted. Tried on 2 computers, Vista + XP. No device shown on computer. Thanks Apple! Didn't have this problem before update. How about rolling back your update?

Error 9
This error occurs when the device unexpectedly loses its USB connection with iTunes. This can occur if you manually disconnect the device during the restore process. You can resolve this issue by using USB troubleshooting, using a different Dock Connector or Lightning Connector to USB cable, trying another USB port, restoring on another computer, or by eliminating conflicts from third-party security software.

CANNOT RESTORE MY IPOD TOUCH 1ST GEN AFTER UPDATE, WON'T RESTORE TO PREVIOUS IOS EITHER. hOW CAN i GET IT TO WORK? TO 3.1.1. IOS

My ipod worked until I purchased teh iOS 3.1.1 update from the apple store. Now my Ipod touch 1g will not even restore to the original iOs. How can I get it to update to the 3.1.1 version or restoer it. It worked fine prior to the update.

Just to give you an update, I got the iOS 3.1.3 installed (Even with the error messages 1602 & 1604). This is how I did it.
1. Turn off all spyware and antivirus
2. Open ITunes and purchase iOS and download (don't connect you ipod to the computer yet), don't select download and install. Close itunes after download.
3. My ipod was frozen with the connector and iTunes symbol in the screen, so I turned it off and with the usb plugged into the computer, hold the home button down (Puts it in recovery mode), now connect the end of the sync cord to the ipod, open iTunes and let it boot up. You should see the message that it found an ipod in recover and need to be restores. click ok and then select update.
4. This is where it will update and freeze again in restore. To continue update, leave the ipod connected (Don't touch it at all. Close iTunes and then reopen it. The connection should be made the the update should install.
It worked for me, maybe it will fro yo.

IPod Touch Mail crashes after update 3.1.3

Hi,
It seems that since we updated our iPods Touch (different ones, 2nd Generation) to software 3.1.3, Mail app stopped working. It opens for a few seconds then it crashes. I have reset one of the iPods completely and synced it again, and still the same behavior. Something curious is that I open Mail, delete some messages, it crashes, and Mail shows the same number of new messages, as if I hadn't deleted any, and upon opening the app, yes, there they are. Rest of iPods seem to be working fine.
An older iPod (1st gen) that we have not updated works just fine.
Any clue or fix?
Thanks

My iPod does the same, Initially Apple blame the ISP, after much discussion it seems that there is a problem with 3.1.3 but they are reluctant to admit it. Firstly be denying all knowledge of problem then by blaming others. I think the problem is too big for them to admit and they can't fix it in the short term. Some are re-installing old software from net to get over problem, but Apple won't support old software. If any one has found a solution please let me know.
copy cat

IPod touch duplicates songs after updates

My I-pod touch duplicates some (not all) songs after every IOS update. The only way I've found to correct this is to restore my I-pod and then synch everything again; very annoying and time-consuming. This occurs even after turing off I-Cloud Match. Any ideas/suggestions?

The only solution is the delete the non-playing songs and resync them or redownload them. Sometimes some files on the iPod get corrupted during and update. You may even have to restore the iPod:
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync/delete all music and resync
To delete all music go to Settings>General>Usage>Storage>Music>Tap edit in upper right and then tap the minus sign by All Music
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.

Unable to connect my ipod touch to itunes after updating to ios 5

After i have finish updating my ipod touch 4th generation, to ios5 , my ipod was unable to connect to the itunes and all the apps and song are all missing from my ipod touch
when i open my itunes it also say iTunes could not connect to this iphone because an unknown error occured (0xE8000065)
Please help me thank you

See this Apple support document related to your issue.
iPhone, iPad, iPod touch: Unknown error containing '0xE' when connecting to a Windows PC
B-rock

Charging problem on iPod touch 4th generation after updating to iOS 5.1.1

I updated my iOS to 5.1.1 yesterday when I synced some new music onto my iPod touch 4th gen. It worked fine, and charged fine yesterda after the update. I had it plugged in charging until I left, I used it and it die over night. When I went to charge it, it kept coming up with "Charging is not supported with this acsessory" wether it was in the wall, or plugged into my computer. As most windows users will know, when you plug yout iPod into the USb port of the computer it comes up with the Scanner and Camera wizzard. I generally close this, but with my curiosity, I let it stay open (without running the wizzard) and now my iPod is charging from ym computer, as long as this is open. Why does the scanner and camera wizzard need to be open for it to charge? Is there a fix for this? I've seen symillar problems on other iOS devices after upgradign to 5.1.1, so could this problem be because of the iOS update?
Thanks in advance, Alex "Twitch" Brent

-Try another cable.
- Look at the dock connector on the iPod look for foreign materia and abnormalities.
- The nort charging topic of
iPod touch: Hardware troubleshooting
Try the standard fixes:
- Rest. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup
- Restore to factory defaults/new iPod

Ipod touch not working after update

I just attempted to install the latest iPod touch software update via itunes. It downloaded and started installing and everything seemed normal. Then I got a weird error that said something along the lines of "Could not update ipod. Error 9" Now the ipod won't turn on at all, won't reset, and itunes doesn't recognize it. When I plug it into my pc (where it is synced), I get a windows bubble that pops up saying the device isn't recognized. When I plug it into my mac, nothing happens at all.
Any suggestions?
-CEJ

Hey everyone. I had this same issue (1st Gen iTouch crashed in the middle of the update with an error, then perpetually showed the USB cable picture and wasn't recognized by my PC).
I was flying West for Thanksgiving, and the prospect of not having my music was so terrifying that out of complete desperation, I borrowed my roommate's Mac to see if I could somehow magically finish the update there. For whatever reason, it worked!
I don't know if it was the fact that it was a Mac, an older version of iTunes, or what, but I was able to do a restore after downloading the new firmware on his computer (I think it was an old Powerbook G4), though I lost all my data. Still, it works now, and I was (thank God) able to listen to it on the plane trip after re-adding my music.
So I wish I could give more details, but at the very least, THERE IS HOPE! Maybe someone more daring and less busy than I can narrow down the variables, otherwise I'll see if I can figure more out when I get back home this weekend. However, I sincerely hope Apple takes responsibility and figures it out themselves before then. Given how serious losing your ability to listen to portable music is for most of us, I really can't believe that they haven't even deigned to address this issue on their own boards.
Anyway, happy Thanksgiving everyone, and hang in there.
-J

IPod touch 1G broken after update from 1.1.5 to 3.1.1

Hi!
I hope this is not a doubled entry. I found only similar issues but no solution.
I´ve bought the new OS 3.1.1. (on 1st October) and then updated my iPod touch from 1.1.5 to 3.1.1 with iTunes 9.0.1.
Since then my iPod does only react on one (sometime two) touches and then it is like frozen.
I tried everything but I was not able to repair my iPod.
For example, I tried to go back to version 1.1.5, by clicking Shift + Restore in iTunes and selected the file "iPod1,13.1.1_7C145Restore" in iPod Software Update folder.
I tried this in recovery mode and from DFU mode.
Do you have any idea? In one thread it was mentioned that downgrade from 3.1.1 (which caused problems) to 3.0 was successful. Where do I get an 3.0 ipsw file?
Regards,
Gerald

I'm fairly certain that's incorrect.
http://www.apple.com/ipodtouch/software-update.html
At the bottom of the page you'll see which features of 3.1 aren't available for 1st gen touches since they lack bluetooth and peer-to-peer connectivity. Mentioning that at all would imply that the update is meant for 1st gen touches as well.
And 3.0 worked beautifully (for most people, there's always a couple problems), widespread problems didn't start until 3.1.1.
Sorry that I have no answer for you gewi, just had to correct that last poster. You can probably find a 3.0 ispw file somewhere online, if you jumped straight to a higher revision it's not going to be on your computer.

Can't sync iPod Touch 4th Gen after updating to IOS 6.0

I've updated my 64GB iPod Touch 4th Gen to IOS 6.0, but now I can’t sync it with iTunes.
It connects OK, but iTunes isn’t detecting what is already there - it thinks it is full of 48MB of “Other” (rather than music, apps, photos, etc.). In other words iTunes isn’t detecting what is already on the iPod properly (it just knows it’s nearly full of something).
So if I try to sync, iTunes thinks it needs to add all my music, etc. again, and therefore says it’s way over capacity (i.e. 48MB of “other” + 48 MB of all my music, etc.).
Help! Any suggestions?

- Try resetting the car system if you can.
Sometimes this works
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
However. sometimes an iOS update breaks compatibility. In that case you will have to wait for a firmware update to either the care system or the iPod.

Ipod Touch not syncing after Update

I've just restored my Ipod Touch with new software and it's been restored but it won't sync anything other than podcasts and the last album I added to my library.
All the boxes are ticked to sync music, apps, films etc but it's just not doing it.
Any ideas?

Hello mdbiggio
The article below will assist with getting your iPhone back to showing up in iTunes.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Thanks for using Apple Support Communities.
Regards,
-Norm G.

IPod Touch 4th gen after updating to IOS 6.0.1 no longer plays sound when connected to a JVC KW-AV60BT through USB port.

It used to work fine, but now when you plug in to the USB, it properly identifies the head unit in settings>General>About, and the JVC unit displays album art, track info and scrolls through music fine, but no sound comes through the speakers. I've tried to reset all settings on the iPod, I've tried the reset on the head unit, even disconnected the vehicle battery and nothing changes. I can also add that my sisters iPhone 4S on IOS 6.0.1 also performs the same when connected. I've tried my Touch in the USB port of my 2010 Chevy truck and that works fine. oh, and an MP3 player worked proper with the JVC USB port.

- Try resetting the car system if you can.
Sometimes this works
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
However. sometimes an iOS update breaks compatibility. In that case you will have to wait for a firmware update to either the care system or the iPod.

Albums names changed after updating to iOS 5

I just updated my iPad2 to iOS5 and all my albums" changed to name like 100IMPRT in the "Events" folder
They were labeled as the date the pictures were taken
Could some one help me ?

I can confirm that this problem was introduced for me after upgrading to 5.1 again for a ported number.
The first symptom noticed was that other people receiving my iMessages noted that my messages showed up as new threads not as part of existing message threads. Checking "my number" confirmed that the number shown has reverted to the pre-porting number. Turning off/on iMessage no longer fixes this, neither does a phone restart.
Turning off iMessage at least means that others now see my text messages in the original conversation threads.
Please fix this. Preferably without needing to change sim cards.

Server Name Changed after update

I'm new to SBS 2011 so I don't know much about it yet. I updated a server for a client and when the server retarted the name for the server that showed up in the Network had changed. It's now showing up as WIN-P0NIHSQCMU2. I tried restarting
from the last know good configuration and that didn't work. The biggest problem is because the name has changed no one can gain access to the server over the network. Any help or advice would be much appreciated.

Hi:
First, it might help the community to know what updates were applied and you see any errors in the logs that might be helpful. I would create an image of the system as it is now for possible future troubleshooting onto fresh media using such as acronis
or preferably shadow protect, both offering free trials of their product. Note that you want to do this from a bootable CD of their product created from their ISO.
Then, depending on what errors I see I would restore the entire system from backup or alternatively try just restoring a system state backup less than 60 days old, preferably either that existed just before the updates were applied.
Since we don't know what happened, I suggest to everyone on this forum that systems, particularly servers, be rebooted and the event logs examined before applying updates to check for errors that have already crept into the system.
Larry Struckmeyer[SBS-MVP] If your question is answered, please mark the response as the answer so that others can benefit.

Skype microphone wont work on Ipod touch 4th gen after updating it.

So i dont usually update apps that often. But i for some reason wanted to update skype. So i updated it and then went to go on skype with my friends. So i went on a voice call and it turned out they couldent hear me, it wasnt on mute, they didnt put me on mute blah blah. I just want it to work again.
and going to Privacy>microphone>skype
doesnt work cause the microphone option isnt even there....

- Make sure the mic hole is clear and unobstructed. It is the little hole on the back by the camera lens(if has back camera). For the 16 GB one without the back camera the mic hole is on the top edge near the center.
- Open the Voice Memos app and see if you see movement on the VU meter needle with changes in noise level trying to be recorded.
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

IPod Touch name change after updating to 3.1.1

Similar Messages

Maybe you are looking for