IPod Touch no longer working with Nike  after 4.3.2 update.

I updated to 4.3.2 about a week ago and immediately afterwards my itouch was not able to pick up the Nike+ sensor when initiating a run (during the "walk around to start the sensor" part).  I even went out and dropped 20 bucks on a new sensor at Best Buy because my initial thought was the battery died since I've been using it for about 2 years.  When I went to pair the new sensor I was surprised to see the itouch finding "multiple sensors" and still pickign up on my old one, so I had to go to a seperate room to pair the new one.  I thought all was right in the world, but the next morning again it would not find the signal to start the workout. 
I also did a factory reset, but still nothing.
What's going on? Is anyone else having this problem or is it just me?

I was also having this problem with my Kenwood car stereo. I went into the store and they did a complete restore. I didn't think it worked but the next time I plugged it into my usb to connect with my car stereo it worked. So you might try doing a restore.

Similar Messages

  • All of a sudden, my 4th gen iPod Touch no longer works with my Apple TV, has Apple "upgraded" something to kill off this older unit? (IOS 6.1.2)

    All of a sudden, my iPod Touch (4th gen, IOS 6.1.6) no longer works with Airplay on my Apple TV.  It was working and still works as a 'remote' but not with Airplay which seems to indicate I've been abandoned by the message that pops up on the screen saying in essence "too bad you don't have IOS 7.1". 

    See
    iOS: Device not recognized in iTunes for Windows
    - I would start with
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    or              
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
    - Then do the other actions of:
    iOS: Device not recognized in iTunes for Windows
    paying special attention to item #5
    - New cable and different USB port
    - Run this and see if the results help with determine the cause
    iTunes for Windows: Device Sync Tests
    Also see:
    iPod not recognised by windows iTunes
    Troubleshooting issues with iTunes for Windows updates
    - Try on another computer to help determine if computer or iPod problem

  • Ipod touch no longer working with isimple device?

    I have a 4th gen Ipod touch that was working just fine with my isimple device in my vehicle until I believe I updated the ipod to the latest firmware. I now recieve a message saying device is not compatible with Ipod, Is there anyway I can rollback to the previous version which I believe was 6.1.2? Thanks!!

    Downgrading the iOS is not supported by Apple.
    Sometimes this works:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up                             
    - Restore to factory settings/new iOS device.
    Go to the devices support site and see if they have anything. Maybe a firmware update is available. Otherwise you will have to wait for a firmware or iOS update.

  • IPod Touch no longer works with car stereo after 4.0 update

    I updated my iPod to 4.0 a couple of days ago, and my Hyundai Santa Fe's built-in iPod interface no longer recognizes my iPod's music - it just says "empty iPod" or something of that nature. Is anyone else having this problem?? What should I do?

    Add me to the list. Brand blankety-new ipod touch that after 4.0.2 wouldn't work with the Subaru-factory-installed ipod connector in my '08 STI. The shut-it-off-and-restart-in-the-car method at least made it able to play music again but still no recharging.
    To add insult to injury I did the have-an-Apple-GENIUS call me thing. The first thing was that they called me....for about 1/4 of a second. The phone blipped for less than a ring and then I got an email saying, "Oh, we TRIED to reach you and you weren't there. Why don't you call us?". So I called and was immediately put on hold. When one of the geniuses finally picked up, I described the issue with great patience and his insightful answer was, "let me put you on hold while I talk to my supervisor." So I sat on hold for five minutes until...they just hung up...no answer, no, "gee we think you're SOL"....just "click". Thanks a boatload Mr. Jobs.

  • IPod Touch no longer works with I Tunes after connecting an IPhone 4

    I have been using my Ipod touch on Itunes on my PC with no problems and then I plugged in my Iphone 4 for the first time and this was accepted. I then plugged in my Ipod again afterwards and I now get the error message saying ITunes cannot connect to this IPhone error OxE8000065

    Try here:
    iPhone, iPad, iPod touch: Unknown error containing '0xE' when connecting

  • IPod Touch no longer working with car Head Unit since update

    Hi there, I have a problem with using my iPod Touch with my car's head unit.
    I've been using my iPod Touch with the Alpine IDA X001 Head unit fitted in my car for the last 3 months without any problems, however I installed the latest software update for the Touch (v4.0) and now the head unit connects and then says no USB device. At first I thought it was the cable as the cable supplied with the head unit is pretty fragile, so I've replaced it with a new one but it still doesn't work.
    I've tested with my iPod Nano and it works perfectly so its not a problem with the head unit or lead (I plugged the Touch in and it didn't work, plugged the Nano in and worked perfectly and then plugged the Touch in and didn't work).
    Can anyone help or is it gonna be a case of Restoring the iPod Touch back to factory settings ????

    I was also having this problem with my Kenwood car stereo. I went into the store and they did a complete restore. I didn't think it worked but the next time I plugged it into my usb to connect with my car stereo it worked. So you might try doing a restore.

  • My ipod touch no longer syncs with outlook 10 calendar

    My IPod Touch no longer syncs with my outlook 10 calendar.  This seems to have happened after an ITunes update.  Is there a fix?

    Try:
    http://support.apple.com/kb/TS2776
    Advanced troubleshooting for Sync Services on Windows with Microsoft Outlook 2003, Outlook 2007, or Outlook 2010

  • Thanks for responding.  Since I upgraded ITUNES to IOS 6, my IPOD Touch no longer works at all.  I had numerous apps, music and videos on this touch.  It made me restore to factory reset and it still does not work!!! Nothing I do will work on this touch n

    Thanks for responding. Since I upgraded ITUNES to IOS 6, my IPOD Touch no longer works at all. I had numerous apps, music and videos on this touch. It made me restore to factory reset and it still does not work!!! Nothing I do will work on this touch now. I have so much data on this, I don't want to loose or have to restore!
    Can you help me?
    Thanks

    If you restored to factory settings/new iPod and still have the problem that indicates a hardware problem.
    Make an appointment at the Genius Bar of an Apple store..
    Apple Retail Store - Genius Bar

  • My iPod Touch is not working with Bose SoundDock.  How can I fix it?

    My iPod Touch is not working with Bose DoundDock Series II.  Can anyone suggest how I can get these 2 to work together?

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup. See:                                                
    iOS: How to back up                                                                
    - Restore to factory settings/new iOS device.             
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar                                      
    Apple will exchange your iPod for a refurbished one with a new battery for $79 Y can do the exchange at an APple store or sent it in.. They do not fix yours.
    Apple - iPod Repair price                       
    A third-party place like the following will replace your battery for less. Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
    Replace the battery yourself if you are up to it. Y can purchase a eplacement battery for about $10
    iPod Touch Repair – iFixit                  

  • New ipod touch won't work with itunes 10.6.3 says it needs 11.1 but I cannot load that on my macbook using OSX 10.5.8 any way around this?

    New ipod touch won't work with itunes 10.6.3, says it needs 11.1 or newer but I cannot load that onto my MacBook running on OSX 10.5.8 - is there anyway around this?

    No. If your MacBook has an Intel processor you can update to OSX 10.6.8 and then install the latest iTunes.
    A 5G iPod with iOS 7 requires that if you have a Mac you have OSX 10.6.8 or later.
    You can get 10.6.8 here:
    http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard

  • Will ipod touch 4 gen work with windows vista service pack 1?

    Will ipod touch 4 gen work with vista service pack 1?

    All Apple says is:
    PC: Windows 7; Windows Vista; or Windows XP Home or Professional with Service Pack 3 or later
    Does it work/sync with SP1?
    Why not update to latest Vista?

  • Does ipod touch 4th generation work with Altec Lansing Octiv Mini Executive Edition?

    i want to buy a speaker and i wonder if my ipod touch 4th generation work with Altec Lansing Octiv Mini Executive Edition
    plz answer

    If anyone is interested I managed to solve this problem by reformatting the ipod as a mac ipod, with the help of friends system. This does get rid of the music but as I had it backed up wasn't a problem. I then plugged the mac Ipod back into a windows pc and reformatted it as a windows ipod which updated the firmware correctly and have'nt had a problem since.

  • My pc keeps saying usb device not recenized iv tryed so i cant restore my ipod touch 3g it works with iphone4 iv tryed diffrent wires and still the same

    my pc keeps saying usb device not recenized iv tryed so i cant restore my ipod touch 3g it works with iphone4 iv tryed diffrent wires and still the same plz help

    Hello again Graham,sorry I spelt your name wrong on my last post ... Ok I went to the device manager and found a yellow mark. I went to it and selected re install driver. I then re booted my pc. I now have no yellow marks in the list but my pc still wont recognise my iphone.
    Could I try anything else ?
    Cheers Chris

  • Ipod touch 5th gen will not sync after windows 8.1 update

    ipod touch 5th gen will not sync after windows 8.1 update. Computer see's Itouch as mass storage and charges. Worked with Window's 8 fine, as soon as update was done and restarted computer Itouch doesn't show up. Itouch seen on two other computers.

    See:
    iOS: Device not recognized in iTunes for Windows
    I would start with
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    Run this to help if it identifies the cause
    iTunes for Windows: Device Sync Tests
    Have you tried on another computer to help determine if you have a computer or iPod problem?

  • Ipod out no longer works with iOS 6.1

    As the title suggests, after updating my iPhone 5 to iOS 6.1 the iPod out function no longer works with connected devices. With the previous version, I could hook up my Kenwood car stereo using the lightning to 30 pin adapter and the stereo would "Read" my iPhone and begin playing the first track of my music collection. I also had song, artist and playlist search support.
    Now, all I get is a constant "Reading" indicator and can't get past this point.
    Is anyone else having any experiences similar to this and does anyone have any suggestions to fix it?
    Thanks

    Try this.
    Go to Settings>General>Date and Time>Set Automatically>Off.
    Set the date one year ahead. Try to get email.
    If you get an error message, go back to the settings. Correct the date and time (set automatically) then go back and try to get email again.

Maybe you are looking for

  • Oracle Forms10g Application

    Hi, Iam Working on Oracle Forms10g Developer Suite . In Forms6i if i ligin into application i will get the client host name and IP Address. In Case of Forms10g using webutil iam not able to get the same. Can any one tell us its very urgent Regards Ve

  • Csv file uploading for database table creation

    Hi there, I'm in the process of making an application that will be able to upload a csv file and create a table based on the same file. As of now, I have managed to make my application upload a csv file into the database. My problem now is to transfe

  • Oracle Database "Compatible" Parameter - Understanding

    Heloo, Please reply on my below points related to "Compatible" parameter: 1.If we are running 10.2.0.4 on a site and the initialization parameter setting is 10.2.0.3.0 then what BAD impacts it can give on Database. Its our online banking LIVE environ

  • I need help... Runtime error

    I am receiving a runtime error every time I open Photoshop Elements 11.  I have followed the steps in order to change the file "mediadatabase.db3" to old and create a new one, but when I get to that point "mediadatabase.db3" it ISN'T THERE!  Any help

  • Customer Ledger(double discount)

    Hi everybody, Can anyone give me the solution for below mentioned business scenario.......... Quotation is generated with a product and customer is charged ,also discount is given at the time of quotation.Customer is charged on the basis on down paym