Ipod touch will not turn on and is not reading in the usb port
ipod touch will not turn on or connect to my computer
I just had a similar problem and tried all of the reboot techniques with no success. I knew it had to be a connection issue inside the iPod, and grasping at straws, I sprayed a little WD-40. I dried it off and let it sit overnight. Today at lunch I plugged it in to my wall charger and it began charging.
***FYI I know they don't recommend spraying WD-40 on your iPod, but it was a last resort for me. I was at the point of paying to send it in for repairs or throwing it away. I wouldn't try this unless you are ready to throw yours away too.
Similar Messages
-
I Really need a solution, and if you could tell me the cause, that would be awesome too.
Try this... Close All Open Apps... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430 -
I 'think' my Ipod Touch is in recovery mode and people say to hold the power and home button for 10 sec and i did, but its still not turning back on. Plus its dead and wont charge. PLZ HELP ME!!!!
- If in recovery mode the screen will have an iTunes logo with an USB plug.
- Have you tried connecting it to your computer for a n hw and then see if it appears in iTunes. If it does restore the iPod.
- If screen is blank, try placing he iPod in recovery mode and then restoring. For recovery mode:
iPhone and iPod touch: Unable to update or restore -
My ipod touch is in dfu mode and does not want to turn on.
my ipod touch is in dfu mode and does not want to turn on.
What happens when you connect the iPod to your computer and restore viia iTunes?
-
My computer (PC) will not recognize my ipod touch anymore. When I plug it in, it says the USB device attached to this computer has malfunctioned and windows does not recognize it. I have tried attaching the same cord and ipod to a different computer and it is recognized by our mac. I have tried restarting the ipod, downloading all updates on my pc, restarting the pc, etc. Nothing has worked. Please advise.
See:
iOS: Device not recognized in iTunes for Windows
I would start with
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7 -
Hi, I wonder what to do because my ipod touch 5 wish neither open and do not want to load. I really wonder what to do, please help me? : $
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
So my ipod touch won't turn on and I've tried to reset it but nothing i do seems to work. Also, I can't even get the Apple Logo to appear. It really won't start. what can i do?
try pressing and holding the Sleep/Wake button and the Home button at the same time for at least ten seconds, until either the Apple logo or battery symbol appears.. this worked for me when my ipod touch didnt turn on or show the apple symbol.. hope this helps
-
My daughter has an ipod touch with alot of games and music on it. The computer it was synced to is forever gone and on her new computer some of the games dont show up along with her music. She is worried if she connects it to her new computer all will be lost. Is there anyway for this to not happen? The ipod is on its last life due to a cracked screen, and as for the games she has spent money on them such as smurf village and others. When i looked at game center on my phone about less than half of that game showed up. Is there anyway to fix these things before its to late and eveything is gone forever?
THANK YOU.Follow these instructions
Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities -
Hi i recieved an ipod touch gen 5 for christmas and it worked perfectly on the 30th it decided to instantly shut down on me and over heat iv tried all of apples recommeded techniques but it wont work at all even when charging someone please help me!
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
f i bought the ipod touch 4th generation at walmart and i didn't keep the reciept,if it's broken which way could i do?
If accidental damage like a cracked screen from dropping it, that is not covered by the warranty
Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
Apple - iPod Repair price
A third-party place like the following maybe less. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Fix it yourself
iPod Touch Repair – iFixit
If due to a defect, Apple will exchange it at no cost if within warranty and not abused. Go to an Apple store.
Apple Retail Store - Genius Bar
You can check your warranty coverage:
Apple - Support - Check Your Service and Support Coverage -
Hi, my iphone power button doesnt work. Its not turning off and is getting hot since the screen is not turning off.
Use the assistive touch controls
General >. Accesabilty >> assistive touch -
PLZ help my ipod my ipod touch is completely shut down and it doesnt even show the battery icon plz help!
Please don't use a bolded font. It's annoying.
What happened immediately prior to the screen shutting down? -
my ipod touch get restart by itself, and just get stuck with the apple logo, What can i do?
Try connecting it to your iTunes library in recovery mode using the instructions in this Apple support document.
http://support.apple.com/kb/ht1808
Otherwise, try connecting in DFU mode.
http://www.iclarified.com/entry/index.php?enid=1034
B-rock -
My daughters ipod touch will not turn off and is frozen on the Apple icon screen. Tried to update software, didn't work. Tried to restore, didn't work. Does anybody know what else to try?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
My iPod touch won't turn on - and doesn't successfully restore
Hi,
This is really a last resort, because I feel I've tried everything at MY disposal to fix my issue.
Problem:
I have an iPod Touch - 1st Generation, with all updated firmware and updated iTunes to go with it. It simply won't turn on. When plugged in to my computer via USB, it displays the "Connect to iTunes" screen, and I follow the steps to restore it. It fails during restore though. Here's what happens:
1. The screen shuts off and changes to the Apple loading screen
2. iTunes starts "Preparing iPod for restore"
3. The iPod screen shuts off, nothing being shown
4. iTunes stays on "Preparing iPod for restore" for a minute or so
5. I then get an error saying "Unable to restore iPod - Error 1603"
And yes, I have tried recovering my iPod, going into DFU mode, and also going to the help page for Error 1603 and following instructions. The only thought is that the battery is dead, because nothing else pops up.
I've have the iPod for just under 3 years, and it has worked for the whole time up until a few months ago - the battery was not lasting as long as usual.
Any help would be appreciated!
ThanksTry a new battery.
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro 8G RAM 750G HD + OCZ Vertex 3 SSD Boot HD
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
In Memory of Steve Jobs
Maybe you are looking for
-
Problem while creating a new project template
I am trying to create a new project template under one operating unit newly created. I am using P A Super User responsibility for that operating unit. In profile setting the above responsibility has been assigned the new operating unit under Mo opera
-
Dynamic Column width for a report
Will the width property of a column be able to be set at run-time (i.e. ability to set the width of a column to an expression) in SQL Reporting Services 2008? One problem I have seen is the inability to set the width of columns in a report when you y
-
FileDownload - Download string to file
Hi, I want to download some content to a file. I have created a FileDownload element in my layout and i have bound the resource property. In my context node i have made a value attribute of type <b>com.sap.tc.webdynpro.progmodel.api.IWDInputStream</b
-
Something other than uimport.exe
For the last 16 years I have incorporated uimport in with my own coding to create user accounts and manage their access to servers. But it is limited to windows xp or earlier. I would like to use a different tool to do so. I have heard of ICE and LDI
-
Crystal Report Instance - running query when viewing?
Hi Why would a Crystal Report that was scheduled and completed success fully try to run the query again when I click on the instance? Isn't it just suppose to render the report when one clicks on the instance? Thanks Kim