IPod touch won't complete restore?

Alright. So...I have
-a 13 inch MacBook Pro Aluminium Unibody with Snow Leopard.
-iTunes 10.2.1 (1)
-iPod Touch 4G 32GB
and I'm trying to update it with the latest firmware. So to my dismay, the iPod touch gets to 99% and freezes there. Nothing afterwards. Left it for an hour and then disconnected, reset the ipod and took it to another computer. Once there, I tried the same operation. This time, it disconnected and reconnected the iPod during the downloading of the software update. I've tried different cords, different computers, EVERYTHING (even the different user account solution). Nothing seems to work. Can anyone offer any advice?
Thanks.
M---

Try doing a manual install following the directions in the link below.
Basic troubleshooting steps. 
17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G + 120G OCZ Vertex 3 SSD Boot HD 

Similar Messages

  • Ipod touch won't finish restore

    ipod touch won't finish restore.  It has apple logo with almost completed bar and it stops.  itunes still says restoring ipod software.  Just updated itunes.

    I had the same problem and the sad thing is that you wont find any solution, I left my ipod over night with the apple logo screen and the loading bar almost full but it wouldnt move, next day it was still there, I had to unplug it, and I'm pretty sure this cause irreversible damage to your device in the long term since itunes warn you no to disconnect the ipod while the sync is being done and it also messed up my computer, I had to force it to shut down since it got stuck with itunes trying to restore my ipod, you just need to keep conecting your ipod until itunes recognize it as an ipod in recovery mode then it will sync again and everything should work this time, that is what happened to me. Good luck.

  • IPod touch won't update/restore

    I have a 3rd Gen iPod touch (I have determined it is via this http://support.apple.com/kb/HT1353 and it has the A1318 model number on the back)
    I have forgotten the passcode for it, so I have been trying to back it up and restore it. However, each time I try, I recieve the following message:
    I have checked my network connection and it is all fine.
    Any ideas? If more information is needed, I will try and provide it.
    Cheers, DL

    When I was trying to download iOS 5 into iTunes, it had this message too. So I clicked around the iTunes store helping it to maintain a connection to apple iTunes.  This should work when downloading software into iTunes.

  • Ipod touch won't restore

    ipod touch won't restore.. comes up with a screen shot on the ipod showing a usb cable to attach to iTunes.  Ipod won't reset & the one time that it showed up in iTunes it came up with an error msg saying it couldn't be restored...?

    Hey Pal,
    So the issue what u facing is pretty simple, just make sure u run an MS Config on the computer so to check which Program is causing the issue, and then once after done tht try to restore the iPod again and just make sure u also discard all the external USB Devices of the Computer, and try i am pretty sure it will work, and you follow this artcile to run MSConfig http://docs.info.apple.com/article.html?artnum=305415, Do let me know if it works k
    Peace...

  • Two of our ipod touches won't connect to the home wifi.  They have done before. All other apple devices connect fine.  They can see the wifi devices, appear to try to connect (the circle whirls around) but connection doesn't complete.  Ideas?

    Two of our ipod touches won't connect to the home wifi.  They have done before. All other apple devices connect fine.  They can see the wifi devices, appear to try to connect (the circle whirls around) but connection doesn't complete.  Ideas please?

    I have 2 of them that only connected for a day and then reset network settings and they connected again for a day now resetting network settings does not fix it either. My iphone used to work with my home network but after upgrading to the latest OS which is the same versions as the ipods it no longer works either. Acts the same as the ipods. It would seem that the latest tweeks to the OS is the problem with wifi connectivity.

  • IPod touch won't turn on or restore

    iPod touch won't turn on or restore ... Help

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer                 
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • My ipod touch won't respond. Shortly after I downloaded IOS 8, it quite responding. How can I get my pictures recovered?

    My ipod touch won't respond. Shortly after I downloaded IOS 8, it quite responding. All I get is the Apple sign.  I connected to my computer and tried updating and was able to download the USB connection for the device but received an error when it tried to update the ipod. Is there any way to retrieve my pictures from the device before I try to recover? At this point my pictures are more valuable to me than restoring the device.  How can I get my pictures recovered?
    Now it looks like I have the Apple with an line under it on the screen, but still not responsive.

    Check for hardware issues
    Related errors: 1, 3, 10, 11, 12, 13, 14, 16, 20, 21, 23, 26, 27, 28, 29, 34, 35, 36, 37, 40, 1000, 1002, 1004, 1011, 1012, 1014, 1667, or 1669.
    These errors mean that your device or computer may have a hardware issue that's preventing the update or restore from completing.
    Check that your security software and settings aren't preventing your device from communicating with the Apple update server.
    Then try to restore your iOS device two more times while connected with a cable, computer, and network you know are good.
    Confirm that your security software and settings are allowing communication between your device and update servers.
    If you still see the error message when you update or restore, contact Apple support.
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
      Apple Retail Store - Genius Bar

  • My ipod touch won't go further than the apple symbol

    Any help available, as my ipod touch won't go any further than the apple symbol

    First, try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    Finally, if the Restore doesn't work, let the battery drain completely.  Then recharge for at least an hour and Restore again.

  • The safari app on my Ipod touch won't open.

    The safari app on my Ipod Touch won't open. When i open the application it kicks me back to the Home Screen. It's only the Safari app that does that but I need it. I can't delete it and reinstall it and I don't know how to sync the app. Can anyone help me?!

    Still dosen't work
    but thank you for trying to help me out.
    Sorry I ask alot of questions...
    Is there a way to save my scores (of my games) before i restore my ipod?
    And my apps..?

  • Ipod touch won't connect to computer, windows 7, and itunes, and won't charge on my computer

    Whenever I plug in my ipod touch to my computer, NOTHING HAPPENS.There is no "bleep" sound, nothing shows up under my computer, nothing shows up in itunes, and my ipod touch won't even charge. How can I fix this?
    I have tried many things to fix this issue, including reading and doing everything listed under "iOS: Device not recognized in iTunes for Windows".
    I have:
    - deleted itunes and reinstalled it
    - reset my ipod touch using the home and power key
    - tried fixing drivers
    - using a different cord
    - using a different computer (my ipod touch won't even show up on any other computer)
    etc.
    And yet my ipod touch still will not connect to my computer or itunes, and will not charge on my computer. It charges fine in the wall, though.
    I have more information that I believe may be integral to fix this issue:
    - My ipod touch is up to date with iOS 8.0.2
    - My itunes is up to date with version 11.4
    - I tried to connect my ipod using bluetooth, and it shows up like this
    (other than this, it won't show up on my computer at all)
    - After I had updated my ipod touch and itunes and even synced my ipod (which had worked fine), I had then put a facebook app and facebook message app on my ipod touch, which after I had done that the next day I noticed that my ipod touch would not even show up on my computer at all (so I deleted the apps) and yet the problem is still persisting.
    - I installed iCloud on both my ipod touch and my itunes
    - Other than what I stated, I have not made any changes to my ipod touch.
    In my device manager, NO APPLE PRODUCTS/DRIVERS SHOW UP ANYWHERE
    The only place that apple mobile device show up at is here -
    I've even tried to reset/stop/set to automatic the Apple Mobile Device here, and still it does not help.
    Someone please help me. I've provided much information, so some assistance would really be appreciated. If I need to provide more information, please let me know.

    You can try going to Settings>General>Reset>Erase all content and setting and then try setting up via iTunes. If still problem then set up via wifi and go to an Apple Store
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:         
    iOS: Back up and restore your iOS device with iCloud or iTunes
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store   

  • Ipod touch won't charge or show up in itunes

    My ipod touch won't charge nor does it show up in itunes so I can't restore it.  What can I do?

    Sounds like you may have a bad battery. Did you try a hard reset?
    Basic troubleshooting steps. 
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G + 120G OCZ Vertex 3 SSD Boot HD 

  • My brand new ipod touch won't let me download apps.

    My brand new ipod touch won't let me download apps.  I put in my password and then get a screen that says "Download Now".  I can't press the okay button to start the download.  What should I do?  All of the other buttons on the screen work, so I don't think it is broken.

    Try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.

  • My brand new ipod touch won't hold a charge

    new ipod touch won't hold a charge. Genius bar said something might be corrupted, but I have no trouble with my iphone. please advise.

    The try restoreing your iPod. First from backup and if problem persists, restore to factory defaults/new iPod.
    ALso describe what you mean by will not hold charge..

  • My 4th Gen iPod Touch won't open up the apps I've downloaded. I've tried uninstalling and then reinstalling the app and it seems to only be a temporary fix. The reset and reboot didn't work either. Help would be appreciated.

    My 4th Gen iPod Touch won't open up the apps I've downloaded. I've tried uninstalling and then reinstalling the app and it seems to only be a temporary fix. The reset and reboot didn't work either. Help would be appreciated.
    In more specific terms. The apps that came on the iPod like the weather and maps and whatnot have been working flawlessly. It's just when I download an app and then disconnect from wifi it's almost like I'm on a timer until the app stops working. It acts like it wants to open, the screen flashes black then resets to the home pages. I've tried all of the basic fixes, rebooting, reseting, uninstalling then reinstalling. But like in my...long...question, the reinstalling option only seems to be a temporary fix. I just recently downloaded the 5.1.1 udate (I think that's what it was) does that have anything to do with it, or am I just derpy when it comes to iPods?

    Try the other suggestions here:
    iOS: Troubleshooting applications purchased from the App Store
    Then try a restore.

  • {HELP} iPod Touch won't update from 1.1.5 to 2.1...

    Hi everyone, I just received my refurbished iPod Touch 2 days ago and it came with 1.1.5 with the Jan Software Upgrade.
    I plugged it into iTunes and successfully synced my stuff in and also purchased the 2.1 update for US$9++. The download of the update was successful.
    I applied the update and it would stuck at the "Preparing iPod for restore" thingy.
    The iPod Touch screen was completely blank with the backlight still on.(no Apple logo or anything.) Sometimes when iTunes say "preparing ipod for restore" the screen will immediately display the connect to iTunes pic. (no text shown)
    After 20-30 minutes, the error code 1604 came up saying that my iPod could not be restored or somethin like that.
    When I on my iPod again, I would see the Apple screen then the connect to iTunes pictures. (no text shown)
    Connecting to my PC again, the iBoot USB driver thingy will pop up telling me hardware is installed and resdy to use. iTunes will say my iPod is in recovery mode and needs to be restored. Restoring to 2.1 never works. I changed user accounts and iTunes restored my iPod successfully to 1.1.5 again. Trying to update to 2.1 will give me same results.
    Below is a log I found in my C:\[etc.....]
    2008-11-20 12:22:41.578 iTunes.exe[1016:9fc]: restore library built Sep 25 2008 10:48:34
    2008-11-20 12:22:41.578 iTunes.exe[1016:9fc]: iTunes: iTunes 8.0.1.11
    2008-11-20 12:22:41.578 iTunes.exe[1016:9fc]: iTunes: Software payload version: 5F137 (option key)
    2008-11-20 12:22:41.968 iTunes.exe[1016:8b0]: radio-error not set
    2008-11-20 12:22:41.968 iTunes.exe[1016:8b0]: unable to open C:\Documents and Settings\All Users\Application Data\Apple Computer\iTunes\iPod Temporary Files\Firmware\device_map.txt: No such file or directory
    2008-11-20 12:22:41.968 iTunes.exe[1016:8b0]: <Recovery Mode Device 0238FF28>: operation 3 progress -1
    2008-11-20 12:22:41.968 iTunes.exe[1016:8b0]: <Recovery Mode Device 0238FF28>: operation 4 progress -1
    2008-11-20 12:22:41.984 iTunes.exe[1016:8b0]: bootstrapping restore with ***
    2008-11-20 12:22:42.000 iTunes.exe[1016:8b0]: <Recovery Mode Device 0238FF28>: operation 31 progress -1
    2008-11-20 12:22:43.000 iTunes.exe[1016:8b0]: <Recovery Mode Device 0238FF28>: Recovery mode succeeded
    2008-11-20 12:27:45.671 iTunes.exe[1016:9fc]: iTunes: Restore error 1604
    I will only get error codes 1604 everytime I update from 1.1.5 to 2.1 and the logs will look the same.
    I'm using iTunes 8.0.1.11 and my iPod Touch still virgin.(never jailbroken or whatever.)
    Please tell me how to update my iPod from 1.1.5 to 2.1??
    Placing in DFU didn't work too...
    Tried reinstall or update drivers...
    Tried different USB ports...
    Tried restarting...
    Nothin makes it update from 1.1.5 to 2.1 successfully...
    Thanks in advance!
    Message was edited by: The_Fr3ak

    The_Fr3ak wrote:
    After 20-30 minutes, the error code 1604 came up saying that my iPod could not be restored or somethin like that.
    That 1604 error is generally related to USB timing issues.
    Try the tips in the article deggie linked, under "USB Troubleshooting." http://support.apple.com/kb/TS1286
    Try disconnecting all USB devices, other than the keyboard and mouse.
    Jason

Maybe you are looking for

  • X230 Wi-Fi problems after upgrading to Windows 8 Pro

    Hi, My X230 came installed with Windows 7 Pro and was working fine for several months. I upgraded my X230 (Intel Centrino Advanced n-6205) to Windows 8 Pro a few weeks back (10/27). The Wi-Fi was working fine for the first week or so. After that I en

  • Problem in Product Update

    Hi All, I am facing a problem in product updation.I am using maintain FM to update Product in sap crm 2007. after that I am using COM_PRODUCT_SAVE_API.This API takes a lot of time to update only one set type .When I debug this API ,there is a badi FM

  • Can't Send Email to a Group

    Trying to send an email to groups I created in address book.  Opening a new email and typing group name brings up the group but it doesn't populate with emails.  I right clicked on the group to create an email and again, created the email but no emai

  • F8 and F9 Boot Device Option doesn't work HP Elitebook 8470p

    During the start up menu, when I press F8 or F9 it does not work and the system starts up normally. How do I make it so that F8 and F9 works? What do you think seems to be the problem? I've tried pressing the buttons once and also repeatedly and both

  • Implementing IPv6 in a SP environment - Multiple Customer prefixes

    Consider a IPv4 SP that hosts customers Servers/WebSites. Today this SP has a LAN dedicated to these "SMB" clients, all "promiscuos" on the same LAN. Each customer has one IPv4 address, and can (via PAT) serve more than a physical "backend" Server. T