IProcurement is not a valid responsibility for the current user. Please contact your System Administrator.

Hi All,
When I am trying to click on the 'iprocurement Home page' menu in the iprocurement responsibility getting the below error message in R12;
"iProcurement is not a valid responsibility for the current user. Please contact your System Administrator."
Can any one let me know how to resolve this?
Regards
Joseph

Hi Joseph,
I am assuming that the user actually has the iProcurement responsibility assigned to them. If so, try the following solution from note 1560400.1:
1) Logon with System Administrator responsibility
2) Navigate to Profile > System, click on User and enter the user name
3) Search for profile 'Applications Start Page'. Delete the value set at user level and save
4) Retry
Regards,
Cheryl

Similar Messages

Functional Administrator is not a valid responsibility for the current user

Hi,
I have sysatem administrator responsibility as I am DBA on PRD. I assign myself functional administartor responsiblity. Now when i access fucntioanl administrator responsiblity,
I am getting error as
Functional Administrator is not a valid responsibility for the current userPlease help as I need to look at SSHR page for the use who is getting error while laucnhing
Employee Self Service >>> My Benefits Data >>> Financial Profile
Error: the requested URL was not found, or cannot be served at this time
Please help for how I can access functional administrator resp to work further on users issue

Please post the details of the application release, database version and OS.
Have you granted “Security Administrator” role to your user? If not, please do so and check then.
Also, check Apache log files for any errors.
Thanks,
Hussein

The file browser is disabled for security reasons. Please contact your system administrator and check the CKFinder configuration file.

Hi,
This message appeared as I tried to upload to images a site, using their image uploader.
I am technologically challenged, so however you answer, please go slow
Thanks a lot,
Raphael

Thanks Kirk! For once it's not on my end!
Raphael

I can not open Firefox. Keep getting the error message "Failed to read the configuration file. Please contact your system administrator." What do I do?

I can not open Firefox. I keep getting the message "Failed to read the configuration file. Please contact your system administrator." I have tried uninstalling Firefox and then reinstalling it but without success. What should I do?

Which Fx version? When you uninstalled Fx, did you reboot computer before reinstall?
Also, check for / delete any leftover files in the Fx programs install folders, before reinstall?
Is your profile in the default location or custom location?
Have you tried creating a new, completely clean profile - to test (then make sure to select that profile to start Fx - from the Profile Manager)? (no addons or plugins installed).
Does the user acct (that Fx fails under) have access ("rights") to all locations - especially for Fx profiles location?

Not able to login PIA - An error has occurred. You may attempt to sign in again. If your attempt fails, please contact your System Administrator

One of the user is getting the below error when the person is trying to login ELM system. what could be issue for the specific user and how do we resolve this issue?
"Not able to login PIA - An error has occurred. You may attempt to sign in again. If your attempt fails, please contact your System Administrator"

Its works for other users, its only happened for one specific user only? I didn't check the APPSRV.LOG file? what needs to be checked in APPSRV.LOG, I can ask my infra team to check, because I don't have app server access to check log file.

Desinger Workflow 2010: Unable to load workflow actions from the server. Please contact your server administrator?

Hello,
I am facing a problem from last some days..
When I am trying to open/create/update workflows from Designer 2010, then designer giving me an error "Unable to load workflow actions from the server. Please contact your server administrator".
I researched on internet for this error and found some possible reason like
Login user Permission issue
Error in custom actions
So that I checked for permission for login user, but it has administrator rights. and I tried to open workflow by removing custom activity code, but still exist.
also if I tried to create/update workflow for another site on same server then it works without any problem.
Can anybody please help me?
Many thanks,
Nitin
N i T i N

Hi NiTiN4u,
Thanks for your post.
First, here are some troubleshoot workflow error form Microsoft site:
http://office.microsoft.com/en-gb/sharepoint-designer-help/troubleshoot-workflow-errors-HA010237912.aspx#BM20
Second, have you tried to close the site and open it again in SharePoint Designer 2010?
Third, try to restart your IIS and share the results.
SharePoint 2010

Logon is not possible because you have not been assigned to a business role; please contact your system administrator

Hi experts,
I'm having a problem when our project approaching the end.
If I assigned the business role in parameter CRM_UI_PROFILE and PFCG role in SU01.
It works fine,and the user can logon the web ui.
Now I created a new organization model and position,assigned the business role and user to the position.
A PFCG role was also assigned to the business role:
Then I removed all the roles and profiles in user master in SU01.
The user can not login CRM WEB UI and the system raised "Logon is not possible because you have not been assigned to a business role; please contact your system administrator".
Can anybody suggest what the problem is? Is there any other settings I should make?
I suppose that,since the user was assigned to the position the organizational model, the system can determine the user's business role, and through the business role, the corresponding PFCG role can also be determined.
Am I correct?
Thanks.
Jerry

Jerry, yes, you're right.
Let me point you to pretty good explanation right here: Logon is not possible because you have not been assigned to a business role; please contact your system administrator
So business role determination is taken in three steps (you can observe them in class CL_CRM_UI_PROFILE_DETERM method LOAD_PROFILES):
1. From user's parameter CRM_UI_PROFILE (method LOAD_FROM_USER_PARAMETER);
If CRM_UI_PROFILE = * then the user needs to have S_DEVELOP authorization object with OBJTYPE = 'DEBUG' (debug authorization).
2. If not found on previous step: From organizational management (method LOAD_FROM_ORG_MANAGEMENT)
3. If not found on previous steps: Based on PFCG roles (method LOAD_FROM_PFCG_ROLE);

There was a problem connecting to the server "Neptune"; The version of the server you are trying to connect to is not supported. Please contact your system administrator...

I've seen this problem throughout the website, but nothing hits all my bases.
I'm running OS 10.8.4- just upgraded last month.
I work for a company that predominantly uses PC's. I'm in the Graphics Department.
Neptune is a Windows server but houses all our art files. Since the upgrade I have not been able to access the server either by name (which used to work) or by IP address.
I tried doing the suggested "terminal" fix but that did not work.
I must say, mail works. Internet works. Wi-fi works.
Any other suggestion?

Hi AppleRocks
Glad you've found a workaround however this is a common problem for people trying to connect via AFP as a registered user to a legacy server.
Whilst connecting via SMB and as a 'guest' should provide a temporary solution some people need to connect via AFP as a registered user to access all of their servers files successfully.
There are several sudo commands and discussions on this subject (Believe me I've read most of them ) but I have found this thread to be the simplest and most effective:
Connecting to legacy AFP services - Apple Support
Hope this helps future readers of this thread!

What does 'The operation has been cancelled due to restrictions in effect on your computer. Please contact your system administrator' mean?

I have a problem with my printer, and I'm trying to access the manual through the printer 'Properties' but it won't let me and I just get this message. I also get this message when I'm trying to upload updates to Adobe Acrobat.

hello drthompson, this doesn't sound like a problem that is related to firefox in particular. please see if running the fixit from http://support.microsoft.com/kb/310049 helps or else please contact a support forum that is specialised in windows support, since this will beyond our capacity here...

In Outlook, when clicking on any hyperlink, I am getting the message "This operation has been cancelled due to restrictions in effect on this computer. Please contact your system administrator." How can I fix this?

Looking at other forums, this problem is related to the browser settings. As I use Firefox 3.5.11 I'm hoping this forum will work.

See http://support.microsoft.com/default.aspx?scid=kb;EN-US;Q310049 You receive an error message when you click a hyperlink in Outlook (default browser)

When I try to launch Firefox I get the message, "This operation has been cancelled due to restrictions in effect on this computer. Please contact your system administrator". The only way I can launch the browser is to re-install it every time.

I cannot find any obvious restrictions on the computer. In the Control Panel under Set Program Access and Defaults, Enable Access to This Program is checked.

See http://support.microsoft.com/default.aspx?scid=kb;EN-US;Q310049 You receive an error message when you click a hyperlink in Outlook (default browser)

Daily Business Intelligence Administrator is not a valid responsibility for

Hi there
I am trying to access the Business Intelligence through Daily Business Intelligence Administrator responsibility I am getting following error.
Daily Business Intelligence Administrator is not a valid responsibility for the current user. Please contact your System Administrator.
How I am going to find out that Business Intelligence is fully installed and enable?
Thanks
ASIM

Try using the FUNCTIONAL ADMINISTRATOR responsibility.
Navigate to core services > caching > global components (can't remember if that's exactly the right names)
Then press the clear cache button.
Sometimes you get this error if you haven't performed these steps.

"Java" is not a valid setting for the language attribute

Got an exception on Weblogic 10.3 after deployment in the JSP as ""Java" is not a valid setting for the language attribute"
I installed weblogic 10.3 and deployed one of the applications.
The JSP containing code like <%@ page language="Java" import=" is giving error.
The error message is like this
"Java" is not a valid setting for the language attribute"
Please let me know if i need to include some jars or change some setting.
Thanks and Regards
Manoj

Thanks a lot.
It is working now with small j of java. But i would still like to know why it was working in Oracle 10g app server and tomcat 5.0 server as well, but not in weblogic 10.3 server. If possible please tell me.
Thanks and Regards
manoj

I have Windows XP and microsoft outlook with FIrefox as my browser; when I try to open a link in an email I get the following message "This operation has been canceled due to restrictions in effect on this computer. Please contact your system administrato

I have Windows XP and microsoft outlook with Firefox as my browser; when I try to open a link in an email I get the following message "This operation has been canceled due to restrictions in effect on this computer. Please contact your system administrator"

Tried that. Unfortunately it did not work.

Error (Data mining): The specified mining structure does not contain a valid model for the current task.

I'm trying to run the Cross validation report on a mining structure that contains just Microsoft Association Rules mining model. In Target Attribute, I've tried:
Actual(Service Description).SE value
Actual([Service Description]).[SE value]
Actual(Service Description)
Actual([Service Description])
just because i don't know what is the exact correct format, but none of them worked, and I always get the following error:
Error (Data mining): The specified mining structure does not contain a valid model for the current task.
the following is my mining model structure

Association rules does not allow for cross-validation
Mark Tabladillo PhD (MVP, SAS Expert; MCT, MCITP, MCAD .NET) http://www.marktab.net

IProcurement is not a valid responsibility for the current user. Please contact your System Administrator.

Similar Messages

Maybe you are looking for