IPTC Caption Metadata lost in referenced photos, Aperture 2.1.4

I have a mid sized library of personal photos. The older photos were imported to Aperture from iPhoto. My wife had added Captions to the photos in iPhoto and in Aperture. The photos are stored as referenced files, the more recent ones on the MacBook hard drive, the older ones are now on an external FAT32 formatted hard drive. Some time in the last year or so the Captions to the photos on the external drive have got lost, possibly when I upgraded the OS to Snow Leopard. The strange thing is that other IPTC metadata is still there. When importing the photos from iPhoto a Keyword was added, either "iPhoto Original" for the original photo or "iPhoto Edited" for the edited version, both photos now originals in Aperture.
I moved the photos to the external drive using Aperture Relocate Masters and the Captions have been visible since that move. I tried relocating a photo back to the original folder on the MacBook but the caption is still missing.
Has anyone had a similar problem?
Any help would be much appreciated. Hundreds of hours of work went into adding all the captions.

I have seen this kind of thing in Aperture 2 for what appears to be no reason on FAT32 drives - never really got to the bottom of it but it seems to be related to Ap2 re-reading the IPTC metadata from the master and replacing the IPTC that is in Aperture's database because Ap thinks the file changed.
Even without a FAT32 drive in the mix if you change ANYTHING about the master file Aperture will re-read the IPTC from the referenced master and replace the IPTC in Aperture's database. Ap3 is much more intelligent in the way that it handles this in most cases but can still do some unpredictable things which manifest as "disappearing" metadata within Aperture. I have sorted out my Ap3 work-flow so this doesn't happen to me any more but... there are some things that you cannot do that I would like or there will be blood.
Long story short - if Aperture thinks the file changed in anyway for any reason it can screw your metadata in Aperture.The infamous issue was using external software with Ap2 to add GPS data to masters which would wipe out IPTC data within aperture's database.
RB
Ps. Note to self - write post on what works and what doesn't with Ap3 and metadata synchronization

Similar Messages

  • Lost referenced photos in Aperture -- need help with re-associating them

    When I first started using Aperture 3, I elected to have my existing iPhoto pics as referenced, rather than managed files.
    I recently replaced my hard drive (for a bigger one to hold all those photos...). Now I find that whenever I click on a referenced photo, I get the error message:
    Versions with unavailable master files cannot be exported. The selected master image is either offline or not found. Please reconnect it and try again.
    I understand I can go do File>Locate Referenced Files.
    Given that they haven't been moved from their original location (I assume within the iPhoto library), is there a way to automatically re-associate all of them? I've got about 10,000 photos like this now and can't possibly track them down one by one.
    In the dialog window that pops up, the lower box is where you point to the original files. I can select "iphoto library" but don't see any way to do this easily for a lot of photos. Am I missing something?
    Thanks.

    Oh, man -- THANK YOU!  That last bit of info did it for me.
    So to summarize for others that may be struggling with this:
    [1] Create a smart album to locate all the  referenced photos (I used the keyword "iphoto original" which Aperture applied to all my iphoto pics when I starting using Aperture).
    [2]Select all photos in the album (cmd-A)
    [3] File>Locate Referenced Files
    [4] In the upper panel highlight one photo. 
    [5] Use spotlight to locate where that photo is on your hard drive.
    [6] In the lower panel navigate to the location of the photo
    [7] Click on the "reconnect all button at the bottom.
    Aperture then took about 5 minutes reconnecting all my referenced photos.
    Excellent. Thanks!

  • How do I change 'original' photos to 'referenced' photos in Aperture?

    New to Aperture, I mistakenly imported photos into Aperture believing they were 'referenced', and I applied a lot of metadata.
    Then I discovered they were 'original', not 'referenced'.
    Is there an easy way to switch them to 'referenced', and not lose my metadata?
    I need to keep the no. of photos on my laptop to a minimum, therefore I cannot store all my images in Aperture. (I probably should have gone with light room, since I hear it does this natively.)
    Thank you,
    Gina S

    When you import a digicam file into the Aperture Library, you tell Aperture where to store it.  If it is stored inside your Aperture Library package, it is referred to as "Managed".  If it is stored outside your Aperture Library package, it is referred to as "Referenced".  Aperture makes it easy to store your imported files on whichever directly-mounted storage device you want, and also easy to change the storage location at any time.
    Once they are imported, your digicam files are called "Originals" in Aperture-speak.  (In the manual, they also use the out-dated term "Master".)
    For a quick review of the parts of Aperture, look here.  I think you'll find it helpful.
    Metadata is Image-specific.  It remains with the Image, regardless of where you tell Aperture to store each Image's Original.
    Lastly, to save space on your system drive, you might consider, as an alternative to referencing some (or all) of your Originals to an external drive, moving your Library to an external drive and leaving all your Originals managed.  I have run Libraries off external drives for years.
    Aperture program: on system drive
    Your Library: either on system drive or on (fast) external drive
    Your Originals: either in your Library (managed) or elsewhere (referenced), almost always on external drive.

  • No IPTC caption on import!- How did you migrate xl-library to Aperture?

    Folks,
    How can you possibly migrate a 100.000 plus image library into Aperture without having to completely redo the IPTC captions after import?
    I find my images mainly by IPTC searches (so far iView pro) which to me represent years of captioning work.
    Now that 1.5 has finally given us more control to reference our library I started to get excited again about Aperture, but IPTC only on export is not enough IMO.
    How did you manage to ideal having DAM and Raw processor in one app?

    Thx Jeremy,
    did you get hold of a copy of Adam's new version that
    covers iView 3.1 and Aperture 1.5 or did you use
    their older version?
    Could you in any way keep the organixational
    structure of iView's "Category Sets" when you
    exported all your stuff into Aperture?
    best regards,
    grischa
    Hi again. To explain better what I meant - I didn't use Annoture, I just used the function in iView itself whereby you can "synch" the metadata that you add in iView back to the file itself, so it is stored within the image file. Then when you import that image file into Aperture, the information is correctly read.
    There is one problem - iView uses some fields that (I think) are not read by Aperture (Location, maybe ??) or that are not used correctly (iView stores "People" in the "Contact" field for example) However, there is also a script in iView that allows you to copy metadata items from place to place, so you could copy the iView Location field to Keywords, so that it is seen by Aperture when you import it.
    Hope that makes sense!!
    regards,
    Jeremy

  • How does Photos handle Aperture referenced photos

    In order to keep my Aperture's working library at a reasonable size, I keep the latest 3 years of photos locally and move older photos onto my NAS drive. Aperture keeps previews and can reference/open the original files as soon as I have mounted my NAS.
    How will the new Photos app handle these? If they simply disappears from my library, I am stuck with Aperture or have to move over to Lightroom.

    The Photos.app can handle referenced images. And it can consolidate referenced images into the library.
    I don't know, however, if Photos can work with referenced photos on a NAS.
    Test it with a small library before you migrate.

  • Scripting iPhoto, Graphic Converter - copy photo Comment to IPTC caption

    I want to select a bunch of photos in iPhoto and have the iPhoto comment for each file copied into its IPTC caption.
    The script below works without throwing an error but the IPTC caption contains some trailing garbage in about 1 out of 3 photos. How to eliminate garbage?
    tell application "iPhoto"
    set selectedPhotos to selection
    repeat with thisPhoto in selectedPhotos
    set thisPath to image path of thisPhoto
    set thisPath to (POSIX file thisPath) as string
    set theComment to comment of thisPhoto
    copy theComment to theCaption
    tell application "GraphicConverter"
    activate
    try
    set iptcinfo to get file iptc of thisPath
    on error errMsg number errNbr
    set iptcinfo to {"", "", "", "", "", "", "", "", "", "", "", "", "", "", "", "", "", "", "-1", "", "", ""}
    -- no IPTC in file so make one
    end try
    set the first item of iptcinfo to theCaption
    set file iptc of thisPath to iptcinfo
    end tell
    end repeat
    --copy the iPhoto comment to the iptcinfo
    end tell

    I'm not good with scripting however to get the description applied to the IPTC description field, you can use iPhoto. All you have to do is use the Export option, select JPEG and then check the check box about including the title and description data. I've verified it is included with Exifer a freeware program for PC. Although the data is there, it is not read by Picasa on PC despite also reading and writing the caption to the IPTC description file. Do you think the extra garbage might also be being written by iPhoto and hence stopping Picasa from recognising the data? I'm using iPhoto 7.1.1 (354). Any help or suggestions to get descriptions written to IPTC would be great! Cheers.

  • Help! Problem with Aperture referenced photos after I updated to iPhoto 09

    I updated my iPhoto library to iPhoto 09. Then I rebuilt my Aperture 2.1.4 Library.
    In Aperture, when I try to edit a referenced photo imported from iPhoto, it cannot be found because it is on an unmounted volume. It is conceivable that I previously moved the original iPhoto Library to "Backup" drive – the one the referenced image is pointing to according to Aperture, then copied it to "Sally" drive – the one that iPhoto has no trouble finding, but Aperture is not pointing to.
    I thought I could "manage" the referenced files and point Aperture to the correct folder within the iPhoto library – I can navigate to the folder and file, but the "Reconnect" and "reconnect All" buttons are disabled.
    Does anyone have any idea how to get Aperture to reconnect to the iPhoto library? I hope I don't have to re-import the library into Aperture - that would be a nightmare!
    Thank you,
    Francis.

    I imported my iPhoto 08 Library a while ago, using the Aperture Import iPhoto tool, choosing to "Store files in their current location" (the iPhoto Library, on Sally drive).
    Much later, I had to re-jig my hard drives, renaming "Sally" to "Backup" and "Backup" to "Sally".
    The iPhoto Library is on the new Sally drive and iPhoto has no trouble accessing it.
    Aperture thinks the iPhoto Library is on Backup drive (which used to be called Sally). I'd like to get Aperture pointing to the iPhoto Library on Sally.
    Sorry about the Sally/Backup madness, I thought I'd be detail things as much as I can.
    Thanks,
    Francis.

  • I upgraded to Maverick and lost all my photo library in Aperture.  How do I recover my photos?

    I upgraded to Maverick and lost my entire photo library in Aperture.  How do I recover my photos?

    Update software.
    https://discussions.apple.com/message/23915522#23915522

  • IPTC Core metadata fields lost with PNGs

    Hi there,
    I have a TIF file which contains data in the IPTC core fields. Converting the TIF to a JPEG will retain most of the fields and can be viewed still in Adobe Bridge.
    However, converting to a PNG will lose all of the data. The only way it seems to retain metadata is to set options on the Save to Web options in Photoshop, which doesn't really work too good with a 100mb TIF being converted.
    Resampling to PNG in ImageMagick and then reading in Bridge has the same issue, even though 8BIN and IPTC profiles are actually embedded into the file.
    Does Bridge support IPTC core metadata for PNG files?
    Many thanks!

    They've confirmed the same thing i've found, that Save For Web actually preserves a chunk of the IPTC core data, but this isn't really any good for the quality of image I need to save.
    It's strange how the XMP preserve option isn't available for a standard PNG save.

  • Loss of Captions only in Olympus Camera photos

    Loss of Captions only in Olympus Camera photos after migrating from Mac OS 10.5.11 and AP2 to Mac OS 10.6.4 and AP 3.03
    I have had a problem where the captions written in Aperture 2 on a PowerMac G5 PPC running Mac 10.5.11 are no longer visible after migrating the photos to a new iMac running Mac OS 10.6.4 and AP 3.03. This occurs only in photos taken on Olympus Digital Cameras, no other brands are affected that I’ve seen (i.e. Nikon, Casio, Canon, Pentax). It occurs in both Preview and Aperture 3, replacing the previous Caption data with “OLYMPUS DIGITAL CAMERA”. However, if the same photo is returned unchanged to the older Mac, the correct captions are still visible. Also, Graphic Convertor and CS2 are able to read the correct captions in the IPTC data on the new system. Brand new photos imported directly into AP3 in the new system do not seem to be affected, although I have not used it enough to be sure that it will not happen in the future.
    I believe that this is a problem with a change in how the new Mac OS reads IPTC data. I think the new system reads data from the EXIF (and XMP) fields in preference to the IPTC information, and if there is any information in those other fields, it will not read the IPTC caption. For most camera brands this is not much of a problem, because they do not automatically place any caption information in these fields. However Olympus seems to desire to place it’s name everywhere in the metadata, and their standard metadata include writing “OLYMPUS DIGITAL CAMERA” in the EXIF caption field (a very good reason never to use Olympus cameras in my opinion). If you ever have used Photoshop or Photoshop Elements (I have used fairly old versions only, this may have changed) to edit your photos in Aperture or previously in iPhoto and then migrated to Aperture, I noticed that the photos then have XMP metadata with “Olympic Digital Camera” written in many different fields, which also takes precedence over the IPTC caption in the Mac OS 10.6.x.
    It is a very difficult problem, as once the AP2 library and referenced masters are brought over to the new system and upgraded to AP3, everything looks fine initially in the AP3 Library - even the captions are still there. However, pretty soon Aperture will start to realize that something has changed in the masters (even though nothing has really changed in the photo itself, just the way the system reads the IPTC metadata) and it will start to update the library, replacing your captions with “Olympus Digital Camera”. If you catch it early and try to stop the “updating” by using the “Write IPTC metadata to Masters” command, it will often not do anything, sometimes it will fix the problem for some photos and other times it will proceed to overwrite your previous captions with the Olympus caption - so don’t do that! I have tried all kinds of work arounds, and many of the more obvious options don’t help. I contacted Apple Support and Aperture, their response was that it was Olympus’ problem and a problem with the IPTC conventions. Olympus had no useful options either.
    The best solution I have found so far is using ExifTool to remove the EXIF image description field, and the whole XMP box if the photo has been edited with Adobe products in the past. It’s time consuming process and a little intimidating for a terminal neophyte like me, but it’s easier than rewriting thousands of captions (and even if you do rewrite them in Aperture, Aperture will still change it back to “Olympus Digital Camera” once it decides that the master is somehow different than before). I will try to describe what has worked for me - some situations may be different. In particular, I suspect that writing the IPTC data to the masters upon exporting them for migrating to the new system makes this problem worse, as it causes Aperture 3 to realize that something has changed in the masters and make it update them; however often the masters without the IPTC will not be recognized for reconnecting. Consolidating the photos projects to be exported to the new system seems to help prevent problems within Aperture with the captions, but if you ever export the masters or use referenced masters, the problem will still be there until the EXIF caption is removed. I previously exported the masters (with the IPTC written them upon export in AP2) and then reconnected them in AP3, but this often seems to cause more problems with lost photos, time changes (mostly in the Adobe edited photos) and AP3 recognizing the master as “changed” and updating it, thereby losing the original captions.
    Rule No. 1 - if at all possible, keep a copy of your original masters and Aperture 2 libraries as back ups (and it’s nice to be able to use them on your old system) - I’ve had to re-use them several times until I got things right. If your AP Libraries and masters are on a external HD, it may be best to make an exact clone of it (with the exact same name for the HD), so that you will not have to reconnect or relocate your masters.
    You will probably want to see if you really have this problem before trying to fix it. Open the master taken with an Olympus camera that had a caption written to it in Aperture 2 in Preview and look at the caption information (command-I) under IPTC - if it says “Olympus Digital Camera” where you previously had something else, then it’s a problem. Under the TIFF (which is really from the EXIF data) box in Preview information, it will say the same thing under image description. With the same photo, if you import it into Aperture 3, it will also have “Olympus Digital Camera” as the IPTC caption. If it is already in Aperture 3 from a previous version, if you click on the photo for a full view, you may see the previous caption “update” to “Olympus Digital Camera”. Your actual master is okay (you can look at it in CS, Graphic Convertor, or an older Mac running 10.5. If you have never written anything in the IPTC caption, this problem is not visible, but you still have the EXIF Olympus caption waiting there to cause trouble in the future.
    If you already have problems with changing captions on several photos in Aperture 3 Libraries, it is usually easier to just start over than to fix the photos one by one. Most fixes keep on reverting back until you get rid of the EXIF:ImageDesription box with “Olympus Digital Camera” in it. My process has been as follows:
    Export the Aperture 2 Projects with consolidated masters to an external HD or your new computer.
    2. Prior to opening an Aperture Library that you are migrating to MacOS 10.6 - Aperture 3, importing a project , or reconnecting to the masters from an imported Library or Project, use ExifTool to remove the EXIF image description in the masters. If you have used Photoshop or Adobe products which leave an XMP metadata field, it is probably better to remove this also at the same time.
    To use ExifTool:
    I will describe this in more detail for those of us (like myself) who know nothing about using terminal.
    A: Download and install the free EXIF-tool. (Many, MANY thanks to Phil Harvey, I think that it’s thanks to people like him that the world progresses).
    B: I found it helps to have just one folder where I run ExifTool on the same HD where I am planning to store my Aperture Libraries and-or referenced masters. Name it something like “EXIF-ProcessingFolder”, and then you can move the projects or the folders with your masters in and out of it without having to copy them, and you can always use the same script - which help prevent errors! Put the unopened projects or folders with the masters you want to remove the EXIF image description into this folder. Don’t forget to keep a back-up copy of your photos!
    C: Open Terminal (under Utilities in Applications). You will see
    “last login: xxxx on ttys000
    Network name: ~username$” and an open box (which becomes solid grey when active in terminal)
    Note that your mouse will not work in Terminal, you must use the keyboard and arrow keys to move around the text (copying and pasting does work).
    D: First we will “change directory” to get to the place we want to work on:
    -in the open box at the end of the last line in the terminal, type “ cd “ (space-cd-space, no quotation marks) - the space after cd is important - and then drag and drop the icon for the “EXIFProcessingFolder” that you made in the previous step on your HD to the open box after “ cd “. Before you hit return, copy the file path (it will look something like ” /Volumes/NameofYourHD\ Folder/ Subfolder\EXIF- ProcessingFolder”), and copy it into the PASTEFilePathHERE part of the command line below. (I keep several copies of the command line on a document to paste and copy from). THEN hit return, and terminal will tell you where it is at like this: “NetworkName:EXIF-ProcessingFolder UserName$”.
    E: I like to check where I am at this point, so I type in “ls” (I remember it as “let’s see”) and hit the “return” key to see the contents of the folder where the terminal is at. It should return a list of the different projects, folders or files in the EXIF-ProcessingFolder. That’s good. (If it doesn’t do this, start over with the “ cd “ command to change directories until you’re in the right place).
    F: Now copy the entire command line including the substituted “PASTEFilePathHere” from below and paste it into the open box in the terminal and hit return. It will start processing your photos. You can watch its progress if you want by looking at the Date Modified of the Subfolders (but not files). When it is all finished, there will be a message in the terminal stating how many files were processed, how many were changed and how many unchanged. It may take a while; often I will receive some error messages in the terminal while it is working, mostly about duplicate rotation information - I just ignore it.
    G: When it is finished, type “exit” in terminal, it will reply with “logout [Process completed]”, and then you can quit Terminal. I have not found out the way to stop the process if I need to while it is running, so if I need to I quit terminal, and that stops the process.
    Here are the command lines to use with ExifTool
    (copied and modified from Casamagnolia-wSzxs8’s post)
    To delete the EXIF:ImageDescription of photos in a folder without subfolders: (you do not have to paste the folder location with this command, but the terminal must be in the correct directory)
    exiftool -P -overwriteoriginal_inplace -m -EXIF:ImageDescription= *.jpg
    To delete the EXIF:ImageDescription of Aperture Projects, Aperture Libraries or photos in a folder with subfolders (i.e. if your folders are separated by dates) - (it’s all one line without a return, you need to paste the File Path from step D above over the “PASTEFilePathHere” and then copy the whole thing and paste it into the terminal; mind the spaces; if you include the return at the end it will run as soon as you paste it into the terminal.):
    exiftool -P -r -overwriteoriginal_inplace -m -EXIF:ImageDescription= PASTEFilePathHERE
    (an example of final script for recursive folders): exiftool -P -r -overwriteoriginal_inplace -m -EXIF:ImageDescription= /Users/userName/Desktop/EXIF-ProcessingFolder
    please note that this script will change files in the file path pasted into the command, even if you are not currently in that directory from step D above.
    To delete the EXIF:ImageDescription AND the entire XMP metadata fields (for files previously processed with Photoshop, which now have the Olympus Digital Camera in several XMP fields) of photos in a folder with subfolders (i.e. if your folders are separated by dates) - (it’s all one line without a return, you need to paste the File Path from step D above over the “PASTEFilePathHere” and then copy the whole thing and paste it into the terminal; mind the spaces; if you include the return at the end it will run as soon as you paste it into the terminal.):
    exiftool -P -r -overwriteoriginal_inplace -m -EXIF:ImageDescription= -XMP= PASTEFilePathHERE
    (my limited explanation of the commands are -P saves the date-time of the original format; -r processes the sub-folders recursively; -m decreases the number of error messages; -overwriteoriginal_inplace copies the original file and pastes it onto the changes; -EXIF:ImageDescription removes the EXIF:ImageDescription metadata box; -XMP removes the entire XMP metadata file (I couldn’t figure out how to get rid of just the fields with Olympus Digital Camera written in them, and I don’t see any loss of information that I use, and as an added benefit, I suspect that it helps prevent incongruencies in reading the time & time zone between Aperture and PhotoShop).
    After processing the files with the ExifTool, I then move the projects or folders of referenced masters back to where I intend to keep them permanently (so that I don’t have to relocate them in Aperture later on after reconnecting with them).
    Import the project or upgrade the library in the new system with Aperture 3. If the Aperture Library is already connected to the referenced masters, do not to open it before you have removed the EXIF:ImageDescription from the masters, as it will start to change the caption information in Aperture, and then you will have to manually change the captions back in Aperture.
    If the library is using referenced masters and these are in a new place from the last time the library was open, reconnect to the masters by going to Located Reference Files under the File menu, and navigate to where the masters are and reconnect all. Sometimes some photos will not reconnect, in which case you’ll have to re-import them. You will not need to reconnect the photos if you have already been using the Aperture Library and the photos are already connected, but it would be good to make sure they are all still connected.
    Check to see that the problem is fixed - open some of the previously affected masters in Preview and you should see the correct Captions now. If you had already been using the Aperture Library and the caption still shows “Olympus Digital Camera”, check the master in Preview to make sure it’s fixed, and then change the caption in Aperture. Check your library for captions with “Olympus Digital Camera” (in the search box - Add Rule - IPTC - Caption includes...); if you have used Photoshop in the past to edit your photos and didn’t remove the XMP boxes, check them also (by searching in EXIF:Software - Adobe in the search box) for “Olympus Digital Camera” captions and check the time of the photos (they may be 1 or more hours off). Be sure to click on a photo to make sure it won’t “update” and change the caption again.
    I hope this helps other people with the same problem. It took me ages to get it figured out and it is a very tedious and time consuming process. I wish Apple would consider how this could all be avoided. Please feel free to add suggestions or comments.

    Loss of Captions only in Olympus Camera photos after migrating from Mac OS 10.5.11 and AP2 to Mac OS 10.6.4 and AP 3.03
    I have had a problem where the captions written in Aperture 2 on a PowerMac G5 PPC running Mac 10.5.11 are no longer visible after migrating the photos to a new iMac running Mac OS 10.6.4 and AP 3.03. This occurs only in photos taken on Olympus Digital Cameras, no other brands are affected that I’ve seen (i.e. Nikon, Casio, Canon, Pentax). It occurs in both Preview and Aperture 3, replacing the previous Caption data with “OLYMPUS DIGITAL CAMERA”. However, if the same photo is returned unchanged to the older Mac, the correct captions are still visible. Also, Graphic Convertor and CS2 are able to read the correct captions in the IPTC data on the new system. Brand new photos imported directly into AP3 in the new system do not seem to be affected, although I have not used it enough to be sure that it will not happen in the future.
    I believe that this is a problem with a change in how the new Mac OS reads IPTC data. I think the new system reads data from the EXIF (and XMP) fields in preference to the IPTC information, and if there is any information in those other fields, it will not read the IPTC caption. For most camera brands this is not much of a problem, because they do not automatically place any caption information in these fields. However Olympus seems to desire to place it’s name everywhere in the metadata, and their standard metadata include writing “OLYMPUS DIGITAL CAMERA” in the EXIF caption field (a very good reason never to use Olympus cameras in my opinion). If you ever have used Photoshop or Photoshop Elements (I have used fairly old versions only, this may have changed) to edit your photos in Aperture or previously in iPhoto and then migrated to Aperture, I noticed that the photos then have XMP metadata with “Olympic Digital Camera” written in many different fields, which also takes precedence over the IPTC caption in the Mac OS 10.6.x.
    It is a very difficult problem, as once the AP2 library and referenced masters are brought over to the new system and upgraded to AP3, everything looks fine initially in the AP3 Library - even the captions are still there. However, pretty soon Aperture will start to realize that something has changed in the masters (even though nothing has really changed in the photo itself, just the way the system reads the IPTC metadata) and it will start to update the library, replacing your captions with “Olympus Digital Camera”. If you catch it early and try to stop the “updating” by using the “Write IPTC metadata to Masters” command, it will often not do anything, sometimes it will fix the problem for some photos and other times it will proceed to overwrite your previous captions with the Olympus caption - so don’t do that! I have tried all kinds of work arounds, and many of the more obvious options don’t help. I contacted Apple Support and Aperture, their response was that it was Olympus’ problem and a problem with the IPTC conventions. Olympus had no useful options either.
    The best solution I have found so far is using ExifTool to remove the EXIF image description field, and the whole XMP box if the photo has been edited with Adobe products in the past. It’s time consuming process and a little intimidating for a terminal neophyte like me, but it’s easier than rewriting thousands of captions (and even if you do rewrite them in Aperture, Aperture will still change it back to “Olympus Digital Camera” once it decides that the master is somehow different than before). I will try to describe what has worked for me - some situations may be different. In particular, I suspect that writing the IPTC data to the masters upon exporting them for migrating to the new system makes this problem worse, as it causes Aperture 3 to realize that something has changed in the masters and make it update them; however often the masters without the IPTC will not be recognized for reconnecting. Consolidating the photos projects to be exported to the new system seems to help prevent problems within Aperture with the captions, but if you ever export the masters or use referenced masters, the problem will still be there until the EXIF caption is removed. I previously exported the masters (with the IPTC written them upon export in AP2) and then reconnected them in AP3, but this often seems to cause more problems with lost photos, time changes (mostly in the Adobe edited photos) and AP3 recognizing the master as “changed” and updating it, thereby losing the original captions.
    Rule No. 1 - if at all possible, keep a copy of your original masters and Aperture 2 libraries as back ups (and it’s nice to be able to use them on your old system) - I’ve had to re-use them several times until I got things right. If your AP Libraries and masters are on a external HD, it may be best to make an exact clone of it (with the exact same name for the HD), so that you will not have to reconnect or relocate your masters.
    You will probably want to see if you really have this problem before trying to fix it. Open the master taken with an Olympus camera that had a caption written to it in Aperture 2 in Preview and look at the caption information (command-I) under IPTC - if it says “Olympus Digital Camera” where you previously had something else, then it’s a problem. Under the TIFF (which is really from the EXIF data) box in Preview information, it will say the same thing under image description. With the same photo, if you import it into Aperture 3, it will also have “Olympus Digital Camera” as the IPTC caption. If it is already in Aperture 3 from a previous version, if you click on the photo for a full view, you may see the previous caption “update” to “Olympus Digital Camera”. Your actual master is okay (you can look at it in CS, Graphic Convertor, or an older Mac running 10.5. If you have never written anything in the IPTC caption, this problem is not visible, but you still have the EXIF Olympus caption waiting there to cause trouble in the future.
    If you already have problems with changing captions on several photos in Aperture 3 Libraries, it is usually easier to just start over than to fix the photos one by one. Most fixes keep on reverting back until you get rid of the EXIF:ImageDesription box with “Olympus Digital Camera” in it. My process has been as follows:
    Export the Aperture 2 Projects with consolidated masters to an external HD or your new computer.
    2. Prior to opening an Aperture Library that you are migrating to MacOS 10.6 - Aperture 3, importing a project , or reconnecting to the masters from an imported Library or Project, use ExifTool to remove the EXIF image description in the masters. If you have used Photoshop or Adobe products which leave an XMP metadata field, it is probably better to remove this also at the same time.
    To use ExifTool:
    I will describe this in more detail for those of us (like myself) who know nothing about using terminal.
    A: Download and install the free EXIF-tool. (Many, MANY thanks to Phil Harvey, I think that it’s thanks to people like him that the world progresses).
    B: I found it helps to have just one folder where I run ExifTool on the same HD where I am planning to store my Aperture Libraries and-or referenced masters. Name it something like “EXIF-ProcessingFolder”, and then you can move the projects or the folders with your masters in and out of it without having to copy them, and you can always use the same script - which help prevent errors! Put the unopened projects or folders with the masters you want to remove the EXIF image description into this folder. Don’t forget to keep a back-up copy of your photos!
    C: Open Terminal (under Utilities in Applications). You will see
    “last login: xxxx on ttys000
    Network name: ~username$” and an open box (which becomes solid grey when active in terminal)
    Note that your mouse will not work in Terminal, you must use the keyboard and arrow keys to move around the text (copying and pasting does work).
    D: First we will “change directory” to get to the place we want to work on:
    -in the open box at the end of the last line in the terminal, type “ cd “ (space-cd-space, no quotation marks) - the space after cd is important - and then drag and drop the icon for the “EXIFProcessingFolder” that you made in the previous step on your HD to the open box after “ cd “. Before you hit return, copy the file path (it will look something like ” /Volumes/NameofYourHD\ Folder/ Subfolder\EXIF- ProcessingFolder”), and copy it into the PASTEFilePathHERE part of the command line below. (I keep several copies of the command line on a document to paste and copy from). THEN hit return, and terminal will tell you where it is at like this: “NetworkName:EXIF-ProcessingFolder UserName$”.
    E: I like to check where I am at this point, so I type in “ls” (I remember it as “let’s see”) and hit the “return” key to see the contents of the folder where the terminal is at. It should return a list of the different projects, folders or files in the EXIF-ProcessingFolder. That’s good. (If it doesn’t do this, start over with the “ cd “ command to change directories until you’re in the right place).
    F: Now copy the entire command line including the substituted “PASTEFilePathHere” from below and paste it into the open box in the terminal and hit return. It will start processing your photos. You can watch its progress if you want by looking at the Date Modified of the Subfolders (but not files). When it is all finished, there will be a message in the terminal stating how many files were processed, how many were changed and how many unchanged. It may take a while; often I will receive some error messages in the terminal while it is working, mostly about duplicate rotation information - I just ignore it.
    G: When it is finished, type “exit” in terminal, it will reply with “logout [Process completed]”, and then you can quit Terminal. I have not found out the way to stop the process if I need to while it is running, so if I need to I quit terminal, and that stops the process.
    Here are the command lines to use with ExifTool
    (copied and modified from Casamagnolia-wSzxs8’s post)
    To delete the EXIF:ImageDescription of photos in a folder without subfolders: (you do not have to paste the folder location with this command, but the terminal must be in the correct directory)
    exiftool -P -overwriteoriginal_inplace -m -EXIF:ImageDescription= *.jpg
    To delete the EXIF:ImageDescription of Aperture Projects, Aperture Libraries or photos in a folder with subfolders (i.e. if your folders are separated by dates) - (it’s all one line without a return, you need to paste the File Path from step D above over the “PASTEFilePathHere” and then copy the whole thing and paste it into the terminal; mind the spaces; if you include the return at the end it will run as soon as you paste it into the terminal.):
    exiftool -P -r -overwriteoriginal_inplace -m -EXIF:ImageDescription= PASTEFilePathHERE
    (an example of final script for recursive folders): exiftool -P -r -overwriteoriginal_inplace -m -EXIF:ImageDescription= /Users/userName/Desktop/EXIF-ProcessingFolder
    please note that this script will change files in the file path pasted into the command, even if you are not currently in that directory from step D above.
    To delete the EXIF:ImageDescription AND the entire XMP metadata fields (for files previously processed with Photoshop, which now have the Olympus Digital Camera in several XMP fields) of photos in a folder with subfolders (i.e. if your folders are separated by dates) - (it’s all one line without a return, you need to paste the File Path from step D above over the “PASTEFilePathHere” and then copy the whole thing and paste it into the terminal; mind the spaces; if you include the return at the end it will run as soon as you paste it into the terminal.):
    exiftool -P -r -overwriteoriginal_inplace -m -EXIF:ImageDescription= -XMP= PASTEFilePathHERE
    (my limited explanation of the commands are -P saves the date-time of the original format; -r processes the sub-folders recursively; -m decreases the number of error messages; -overwriteoriginal_inplace copies the original file and pastes it onto the changes; -EXIF:ImageDescription removes the EXIF:ImageDescription metadata box; -XMP removes the entire XMP metadata file (I couldn’t figure out how to get rid of just the fields with Olympus Digital Camera written in them, and I don’t see any loss of information that I use, and as an added benefit, I suspect that it helps prevent incongruencies in reading the time & time zone between Aperture and PhotoShop).
    After processing the files with the ExifTool, I then move the projects or folders of referenced masters back to where I intend to keep them permanently (so that I don’t have to relocate them in Aperture later on after reconnecting with them).
    Import the project or upgrade the library in the new system with Aperture 3. If the Aperture Library is already connected to the referenced masters, do not to open it before you have removed the EXIF:ImageDescription from the masters, as it will start to change the caption information in Aperture, and then you will have to manually change the captions back in Aperture.
    If the library is using referenced masters and these are in a new place from the last time the library was open, reconnect to the masters by going to Located Reference Files under the File menu, and navigate to where the masters are and reconnect all. Sometimes some photos will not reconnect, in which case you’ll have to re-import them. You will not need to reconnect the photos if you have already been using the Aperture Library and the photos are already connected, but it would be good to make sure they are all still connected.
    Check to see that the problem is fixed - open some of the previously affected masters in Preview and you should see the correct Captions now. If you had already been using the Aperture Library and the caption still shows “Olympus Digital Camera”, check the master in Preview to make sure it’s fixed, and then change the caption in Aperture. Check your library for captions with “Olympus Digital Camera” (in the search box - Add Rule - IPTC - Caption includes...); if you have used Photoshop in the past to edit your photos and didn’t remove the XMP boxes, check them also (by searching in EXIF:Software - Adobe in the search box) for “Olympus Digital Camera” captions and check the time of the photos (they may be 1 or more hours off). Be sure to click on a photo to make sure it won’t “update” and change the caption again.
    I hope this helps other people with the same problem. It took me ages to get it figured out and it is a very tedious and time consuming process. I wish Apple would consider how this could all be avoided. Please feel free to add suggestions or comments.

  • IPTC Captioning Help

    I am a contributor with ZUMA Press. I like using aperture to import, edit, caption and ftp images after a game/event. However, I am trying to figure out a way to add a keyword that identitfies an athlete. I am shooting the Barclays this week(a pga tourn). I uploaded a picture of Tiger Woods. The editor added a keyword Woods, Tiger so its easier for clients to search for various images of him. The photo editor emailed me the updated image with all the new IPTC info. I imported it to Aperture to see where I can add athletes names from now on, but aperture didnt show me the info I was looking for. Any ideas???

    Brian,
    I'd suggest to create a new Metadata preset including all EXIF/IPTC and Custom tags, so you can browse all tags the Editor may have used or newly defined.
    You can define the metadata presets to be defned with your images in the "Info" panel of the Library Inspector, like this:
    Set the Metadata preset popup menu to "Edit", then press the cogwheel in the lower left corner to "new View" or "duplicate view", then enable all metadata tags, that might contain the info you are looking for, i.e. in the custom fields section, the IPTC, and EXIF section of these tags.
    Regards
    Léonie

  • Which Metadata option when exporting from Aperture?....

    When Exporting a single Original (never edited) CR2 file from Aperture 3.6 to my Desktop there are 3 Metadata options :
    1) - Don't include IPTC
    2) - Include IPTC
    3) - Create IPTC4XMP Sidecar File
    As I have no idea what 'IPTC' etc is, which option is best to later Import into Capture One, please?

    IPTC are all Metadata you assigned in Aperture or in other applications, as opposed to the EXIF metadata embedded in the photos by the camera. The camera tags would be in the EXIF.
    The get an idea, what is in clouded in EXIF and IPTC, open the Inspector in Aperture in the sidebar and switch the view to "IPTC info". That will show you a list of all tags, that will be included, when you export from Aperture with IPTC included.
    You can only export modified versions with IPTC, since Aperture will not modify the original file on export. That is why you can add a sidecar files, that lists all tags, and many applications are able to read this sidecar file, when you import photos.
    I want the camera EXIF data to be exported with the image file.
    The camera EXIF are already embedded in the original image files. When you export the originals, the EXIF will be included, independent of your setting for IPTC.
    You can test, what will be exported, by opening exported files in Preview and opening the Inspector (Tools menu > Show Inspector)
    You can see all EXIF and IPTC tags that have been exported with the photo.

  • How to filter / find referenced photos by where they are located

    Ok guys, I have been going round the bend with this one.... I've been through all of the Filter options in Aperture 3.4.3 several times over the last week trying to find for some way to get Aperture to only show referenced photos that are located on a particular external hard drive (EXT1) / within a particular sub-folder.
    In addition to some Originals/Masters being located on EXT1 I also have some referenced photos located on my start-up volume (OSX).
    The desired function: I would like to move all of the photos (and video files) that Aperture is referencing (along with the existing folder structure) from within /EXT1/Photos/ to another folder (either also on EXT1 or maybe on to another drive (EXT2), it doesn't really matter where).
    Why do I want to do this? I want to check whether there are any 'lost' files that shouldn't be inside /EXT1/Photos/ that Aperture is for some reason not referencing. If I move the files that Aperture is referecing away from their current location then the things that are left over would either need importing into Aperture, or moved eslewhere, or maybe even deleted. Some such files might have been put there by other applications, or by me accidentally, or more likely that Versions of them have been deleted from the Aperture library but the Orignals/Masters were not moved to the system Trash...
    I've gone through 5 pages of google results, trying all of the keywords that I think might be relevant, searched many posts in macrumours forums as well as here, but I can't find an answer to what I thought would have been a simple question.
    Under File > Locate Referenced Files Aperture can tell me which files are located on each Volume, but from here there is nothing that can be done with the results :-( being able to search my Volume and file path would be very useful to me.
    If I've missed something obvious then sorry, but I've gone cross eyed with lack of sleep tonight I thought I'd throw the question out there in case someone knows whether this is type or search criteria is not possible, or if I'm just missing something obvious!
    Thanks in advance,
    Adam

    My next question, which I can post a new topic for if it's suggested, is "can you safely delete the RAW file in a previously imported RAW + JPEG pair?". I did some research into this a few weeks ago but didn't uncover a proper way of doing this, but someone suggested that you can simply just set the JPEG to be the Original/Master within Aperture and then delete the RAW file within Finder.
    That is a cumbersome workaround. I cannot really recommend it - I tried it myself. Aperture will complain over and over again about the missing RAW files and even repairing the library will ot fix it. The safer way to remove the raw files from the pair would be to export the jpegs as master and to reimport them, then to delete the older imported versions after lifting and stamping any edits you may have done already.
    Aperture's built-in feature to keep only raw for selected images is to allow to import only the jpegs first, browse the images, and than add the raw later for the images that you want to have at a better resolution.
    From the Aperture Manual:
    If you import only the JPEG files and then later decide you want to download the RAW files as well, you can have Aperture identify and import the RAW files that match the JPEG files in your Aperture library.
    To import the RAW files that match the JPEG files in your Aperture library 
    Choose “Matching RAW files” from the Import pop-up menu.The Include pop-up menu appears below the Import pop-up menu.
    Do one of the following:
    To import all matching RAW files regardless of rating: Choose “All matching files” from the Include pop-up menu.
    To import all RAW files matching JPEG files that are unrated or better: Choose “Unrated or better” from the Include pop-up menu.
    To import all RAW files that match the current rating: Choose “Current filter” from the Include pop-up menu.
    Regards
    Léonie

  • How to copy referenced photos from dodgy external drive to new drive when whole file will not copy due to error 36.

    My external WD portable passport drive must be dodgy because I can't back it up or clone it or copy 3 of my 22 photo files to a new portable drive. I get error 36 as I attempt all 3 processes. I have copied my iPhoto library, iMovie events and most of my aperture referenced photos to the new drive. But cannot copy 3 files that contain the corrupted files showing just a grey triangle. I cannot delete or move to trash the corrupted raw photos.
    How can I copy to the new drive any photos that aren't corrupted (grey triangle instead of photo or a photo that's just coloured horizontal broken lines) so I can then reconnect the referenced photos after copying them?
    I am on late 2008 MacBook Pro with lion,
    Many thanks
    Bw

    I've worked out how to copy and reconnect individual photos.
    But can see that what's happening is that heavily edited raw photos are taking ages to load. Or not loading at all. And if opened go to the spinning wheel for 5-10 minutes. I am wondering whether to compress these or take them back to the originals or any other ideas would be very welcome.
    Thank you
    BW

  • How do I edit the "Person in photo" metadata in a single photo?

    This field does not appear in the side view of the metadata so I can't edit it. It does appear if I sync metadata but if I want to edit the data in just one photo this is not an option. Thanks for your help!

    'Person in Photo' is actually listed as 'Person Shown'. To get access to you need to be using the IPTC Extension metadata list (see screenshot)

Maybe you are looking for