"IR date in MIR5"

Please let me know the name of the transaction/transactions through which I can use the field REINDAT to populate the table rbkp.
Rgds
Raghu Shetty

Hi,
regarding REINDAT field in MIR5 report,
the value is obtained in:
Program -> RMMR1MDI
function module -> MRM_RBKP_MANY_READ
here you´ll see:
      SELECT * FROM rbkp INTO TABLE t_rbkp.....
and this is how RBKP-REINDAT is obtained.
Best regards.

Similar Messages

  • Report on Released Invoices

    Hi Gurus,
    Can we get a report from system that what all invoices we have released using MRBR in a single year?
    Please revert asap.
    Regards,

    I am unable to extract the required data through MIR5.
    Please let me know, how can we find out those invoices which are released?
    Thank You

  • Tax code in MIR5

    While checking the MIR5 Report Tax code isn't coming in it??
    Can anybody tell me why it isn't coming??
    In MIR4 In can  see the Tax code.
    But I want to see the Tax code in All my IV Doc.

    Hi Rahul,
    I am able to see the tax code in both transaction code MIR5 & MIR4.
    In Invoice tax code field is available at item level & in Basic data tab.
    If tax code is maintained in Basic data tab, it will appear in MIR5.
    In change layout of MIR5,I am getting one field without description, just select that field. you will get Tax code in List
    Regards,
    Manish

  • Expalin MIR5

    hi experts
    please explian T-code MIR5
    thanks
    ganesh

    Dear,
    MIR5 - Display List of Invoice Documents
    You can use the report Display List of Invoice Documents (RMMR1MDI; transaction code MIR5) to display a list of the invoice documents.
    In addition to the existing program Invoice Overview (transaction code MIR6), here you have extended selection criteria and display options:
    o   Gross invoice amount
    o   Unplanned delivery costs
    o   Currency key
    o   Exchange rate
    o   Entry date
    o   Entry time
    o   Choice between invoice and credit memo
    o   One-time customer with a one-time account
    In the Invoice Overview program you can also change invoices, whereas in this report you only have display options.
    By entering the following data you can increase your selection criteria:
    o   Entry type
    o   Invoice status
    o   Restrictions
    Authorization checks
    To improve performance, the system only performs an authorization check at plant level when you want to display an invoice document.
    Expert mode
    In addition to the displayed selection criteria, you can use the Expert Mode button to show further selection criteria:
    o   Plant
    o   Display the number of the accounting document (FI document)
    If several FI documents exist for an invoice document, then the output list displays a symbol, which you can choose to display the other document numbers.
    o   Documents with G/L account posting
    o   Documents with material posting
    If you want to display an invoice document in expert mode, and enter a plant, then the system checks the authorization object M_RECH_WRK (Invoices: Plant); activity 03=Display, at plant level.
    SAP recommends starting the report in expert mode in the background, due to the increased runtimes.
    Output
    In the output list, the report displays the numbers of the posted and the parked invoice documents. The system does not display invoice documents that do not have a corresponding FI document, for example, invoice documents that are planned for verification in the background,or that have already been verified with errors.
    From the output list, you can display the following:
    o   Invoice document
    o   FI document or list of FI documents
    If more than one FI document is assigned to an invoice document, then you can display a list of all corresponding FI documents.
    o   List of all follow-on documents for an invoice document.
    Display further information
    If you require more data and want a detailed evaluation, you can enhance the current layout or choose another existing layout via Settings -> Layout.
    Regards,
    Syed Hussain.

  • MIR5 Report exit

    Hi..
    I have a requirement in MIR5 transaction.
    When I execute MIR5 ,it displays a list of invoice document with a hyper link for invoice document number.
    When we click the document number the screen redirects to particular invoice through MIR4  in which we get the item and purchase order details. I need that purchase order number of that invoice document in the initial report of MIR5 beside the Invoice document number.
    Is any User/screen exit exists for this requirement?
    Or I need to develop Z screens and program for this?
    Please suggest.
    Thanks In Advance.

    Hi,
    i did that some time ago and i didn´t find any user or exit so i decided to copy the program to a z and do my modifications there.
    i had to display only the first po available as MIR5 is a report that displays header data.
    Best regards.

  • BAPI_INCOMINGINVOICE_GETDETAIL returns "old" data

    Hello,
    I have developed some WF which handles incomming invoices but also have some Z tables behind.
    I will describe my problem now. One of the tasks opens a secondary screen with tx MIR7, on a primary screen there is a button which reads data from invoice. Steps are:
    1. user opens a task - he has a screen with some data
    2. wf automaticallly opens a secondary window with MIR7 (so user can switch between two sap windows with e.g. alt+tab)
    3. user make some changes in MIR7 and save invoice
    4. user click the button in the primary window -> action which reads data from invoice with BAPI_INCOMINGINVOICE_GETDETAIL -> sometimes this function returns "old" data.
    Do u know if the data from MIR7 are saved in some update task, or are they buffered, or....? how can i avoid this?
    thx,
    JJ

    hi..
    U have to give vendor invoice number for it to work.  The invoice should be posted in MM, if u post in FI this BAPI wont work.
    MIR4: In this tcode, you can display the vendor invoice numbers.
    MIR5: THIS CODE gives the list of available invoice documents.
    Regards,
    VIshwa.

  • I install window 8 and Unfortunatly all drive format. And all drive mix, now i have only 1 DRIVE C. I want Bit locker Drive's data Back

    Last sunday i install a window 8 and this window format my all drive & make it 1 drive (DRIVE C). Before all of this i have 5 drive in different size with 1 Bitlocker protect drive.
    So i try data recovery software to recover my data. i got back all my data without that ( bitlocker ) protected drive.
    so please guys help me how can i get back data from bitlocker protected drives.
    please please help me.

    Hi,
    I sorry for your experience, but there is no way to recovery the data encryped by BitLocker untill now.
    BitLocker is designed to make the encrypted drive unrecoverable without the required authentication. When in recovery mode, the user needs the recovery password or recovery key to unlock the encrypted drive. Therefore, we highly recommend
    that you store the recovery information in AD DS or in another safe location.
    Please refer to the link below for the statement:
    http://technet.microsoft.com/de-de/library/ee449438(v=ws.10).aspx#BKMK_RecoveryInfo
    Roger Lu
    TechNet Community Support

  • MB5B Report table for Open and Closing stock on date wise

    Hi Frds,
    I am trying get values of Open and Closing stock on date wise form the Table MARD and MBEW -Material Valuation but it does not match with MB5B reports,
    Could anyone suggest correct table to fetch the values Open and Closing stock on date wise for MB5B reports.
    Thanks
    Mohan M

    Hi,
    Please check the below links...
    Query for Opening And  Closing Stock
    Inventory Opening and Closing Stock
    open stock and closing stock
    Kuber

  • Refreshing the Data from a embed view in a view container

    Hi everybody
    I would like to know how can I do to refresh all data from a View with a view container the problem is:
    that I have a window that has a view at the same time this has a view container.  The Main view brings the data of editable elements when I select one element of the main view the view container brings a list for that element (dependencies) but only the first time a choose an element loads the correct data, when I choose another one it brings the same old data and doesn't make the call for the wdDoInit() method.
    The question is:
    How do I force the view to refresh all the data or call again the wdDoInit() method?
    Thank you for your help

    Aida,
    Lets say you have two components C1 and C2 and you want method from C1 to be available in C2 then follow these steps:-
    1) Goto the Interface Controller of C1 and create a method there lets say doSomething
    2) Then goto C2. There you can see Used Web Dynpro Components --> Right click Add Used Component --> Give some name say C1Comp --> Click browse and select C1 --> Click Finish.
    3) Next goto Component Controller of C2 --> Properties --> Click Add and check if C1 is added. If not then select the checkbox and select OK.
    4) Now goto Implementation tab of C2 and lets say wdDoInit you can write following code:-
    wdThis.wdGetC1CompInterface().doSomething();
    Chintan

  • ITunes & Windows Vista Home - Error File C:\Program Data\Apple Computer\Installer\Cache\iTunes 10.5.142\iTunes.msi was rejected by digital signature policy.

    Tried
    https://discussions.apple.com/thread/2713232?start=0&tstart=0
    and
    http://www.vistax64.com/vista-general/159940-computer-blocking-anything-no-digit al-signature.html
    with no avail!!!
    iTunes opens after I click OK on the above message however I cannot do anything within the app its like Windows it preventing it from running.
    PLEASE HELP!!!

    Update:
    I tried what the diagnostic told me to do, and repaired the installation. I was able to burn a CD in iTunes, but after I restarted, the drives have disappeared again! Here's the diagnostic info now:
    Microsoft Windows Vista Home Edition (Build 6000)
    MICRO-STAR INC. MS-6728
    iTunes 7.6.0.29
    QuickTime 7.4
    CD Driver 2.0.6.1
    CD Driver DLL 2.0.6.2
    Apple Mobile Device 1.1.3.26
    iTunes Serial Number 20D6EAF059AB94B4
    Current user is not an administrator.
    The current local date and time is 2008-01-15 19:09:32.
    iTunes is not running in safe mode.
    Video Display Information
    ATI Technologies Inc., Radeon X1600/X1650 Series
    ATI Technologies Inc., Radeon X1600/1650 Series Secondary
    ** External Plug-ins Information **
    Plug-in Name: Last.fm iTunes plugin
    Plug-in Loaded: Yes
    Plug-in Version: 0.0.13
    Plug-in File Version: 2.0.13.0
    Plug-in Path: C:\Program Files\iTunes\Plug-ins\itw_scrobbler.dll
    No drives showed up to be tested.

  • Format C drive, what steps to take for retaining all data of iTunes?

    Hello
    I want to format my C drive of Laptop and shift my itunes to E drive. I'm on windows 7. C drive is having itunes and in that I have synced my 2 iphones and 1 ipad.
    Now I want to format the C drive and want to retain all the data, backup, media etc of my synced data with the itunes.
    What I've done is that I transferred my music location from C to E drive by using apple forum discussion. I changed destination to E drive in ADVANCED TAB in Edit-Preferences. Then orgainzed data. That was successful.
    Now please help me on what to do next so that i can retain my all my data of itunes safe before formatting my C drive.
    Thanks in advance

    This definitely isn't intended as a substitute for tt2's tutorial (which is comprehensive and more detailed - in case of any differences I'd follow what's stated there), but in summary you should be doing the following.  I've assumed that, as per your original post, you've changed your media location to E:\iTunes and consolidated the library.  You now have a "split library" where:
    E:\iTunes contains a folder called iTunes Media which in turn contains several subfolders such as Automatically Added to iTunes, Audiobooks, Music, ...
    C:\Users\your user name\Music\iTunes contains the following folders and files:
    Album Artwork (folder)
    Previous iTunes Library (folder)
    iTunes Library Extras.itdb (file)
    iTunes Library Genius.itdb (file)
    iTunes Library.itl (file)
    iTunes Library.xml (file)
    I'd suggest making sure that you're running the latest version of iTunes before proceeding - by default, this will be the version that you download and install when you rebuild your PC.
    Before you change anything else, exit iTunes.  Now copy all of the folders and files in C:\Users\your user name\Music\iTunes to the same folder on your external drive (E:) that contains your media folder.  You should now have this:
    or something very similar.  Now restart iTunes while holding down the SHIFT key.  You will see this dialog:
    Select "Choose Library ..." and navigate to the folder on your external drive with the content as described above.  Select the iTunes Library.itl file and click OK.  iTunes will load - check that everything you expect to see is there.
    You now have a "portable library", i.e., all your media and the files that iTunes uses to organize them.  You can use this in conjunction with any PC running Windows and iTunes (noting limitations regarding your iTunes account and authorizations).  As tt2 suggested in his response, before you go any further:
    Make a backup of your new portable library to another device.
    De-authorize your iTunes account.
    Back up everything else you need to retain from the C: drive of your PC (this is beyond the scope of this forum - there's plenty of help out there on various Microsoft sites, etc.).  Just remember that once you take the plunge and reformat the C: drive anything that you haven't backed up is gone ...
    Once you've reformatted the drive and reinstalled Windows, install iTunes.  As befpre, hold down the SHIFT key when you start it up and select the iTunes Library.itl file on your external drive. You can then re-authorize iTunes and be back in business ...

  • I was given the wrong macbook when I gave mine in for repair.  I want to complain.  Also, they wiped ALL my data off the hard drive.  I want to complain to someone in authority.  How?

    I am extremely disappointed and angry with Apple service.  I am a writer and booked three weeks in Spain so that I could finish my book.  On the second day my laptop cut out on me asI was working on it, so I took it to Goldenmack in Cadiz.  Not only was I given someone else's macbook when I went back to collect it, but then when I returned to the UK, the Apple shop in Brighton managed to delete ALL my data from the hard drive because I was unlucky enough to get a trainee on her first day.  I have since learned she should not have deleted my data without even running a diagnostic.  She told me she was going to 'restore' the drive.  I took this to mean she was going to restore my work.  But no!  She erased the lot.
    I complained and eventually was put in touch with a supervisor, who I was told  had authority to resolve the issue. She said she would get the shop to phone me.  That was ten days ago and I'm still waiting. 
    Ok so there's nothing I can do now to get back the three chapters of my book that I have lost and didn't back up, but the  hard drive on this laptop is still faulty.  I try to back up my work every time I use the machine but as soon as I attach an external drive, the whole thing shuts down. I can't use it any more as I can't risk losing any more work.    This laptop is only just over a year old and this is just not acceptable, especially since I have really looked after it. 
    This is an appalling service I have encountered from Apple, and I am not going to ignore it.  I have contacted the young chap whose laptop I was erroneously given, and the repair of which I paid for! (although I did eventually get a refund),  to ask him if he had been given mine as well.  He said he had been completely unaware that his laptop had been given to me and he is furious as he had loads of "sensitive material" on it."  I have no idea in whose hands my laptop has been either, or indeed what damage it sustained while it was supposed to be in for repair.

    Contact Apple Support:
    http://www.apple.com/support/contact/
    Apple - How to Contact Us:
    http://www.apple.com/contact/
    Be sure to refer to the repair ticket number.
    Sounds like a terrible mixup.
    Good luck & happy computing!

  • Data Back Up Plan

    Hi,
    My internal hard drive, 320 GB, 'fully loaded', on my 2 year old imac crashed 10 days ago.
    Since I had the extended warranty, the 'local' Apple store replaced the internal drive within hours
    at no charge and even loaded Snow Leopard and iLife. With a well updated TimeMachine on an external hard drive I was back working at my imac the next day. When I realized after the crash that my precious 250 GB of pictures in Adobe Lightroom and iPhoto, along with a few videos were saved on just one older Maxtor external hard drive, it made me think about a more solid back up procedure.
    The idea now is to move all big volume files to one or more external hard drives.
    In the meantime I have transfered the iPhoto and Lightroom files to an external hard drive (WD MyBook II, 2x1 TB in RAID 1), which gives me the first layer of back up: http://www.bhphotovideo.com/c/product/552322-REG/WesternDigital_WDH2Q20000N_2TB_My_BookStudio.html
    In a second step I am planning on making a clone (with SuperDuper or CarbonCopy) of the internal hard drive (mainly operating systems and applications) and the external hard drive (all big data files) on one additional external hard drive, i.e. OWC Mercury Elite AL Pro Raid 0, 2 TB http://eshop.macsales.com/item/Other%20World%20Computing/ME8Q7T20GB64/
    I am looking for advise here:
    Do SuperDuper or CarbonCopy (I only know the names from the discussion forums) allow me to make a clone from 2 separate hard drives
    Would it be good practice to create a large clone of ultimately 2 TB with ALL files or wouldn't it be better to make 2 clones , one of the internal and one of the external drive.
    TimeMachine had helped me to get back to work quickly after the crash. I expect to fill the WD 1TB drive rather quickly. Where should I plan on using Time Machine in my new back up plan?
    Would appreciate comments and advise.

    reckling wrote:
    Do SuperDuper or CarbonCopy (I only know the names from the discussion forums) allow me to make a clone from 2 separate hard drives
    No. A clone is of your boot volume only. But those apps can make separate backups of multiple drives, either to multiple drives or to separate partitions on the same drive.
    Would it be good practice to create a large clone of ultimately 2 TB with ALL files or wouldn't it be better to make 2 clones , one of the internal and one of the external drive.
    2 is not only better, but your only option with CCC or SD.
    TimeMachine had helped me to get back to work quickly after the crash. I expect to fill the WD 1TB drive rather quickly. Where should I plan on using Time Machine in my new back up plan?
    There is no "right" answer, just a number of possibilities. Some thoughts:
    You could use TIme Machine to back up both your internal HD and the WD set to the OWC, if it's at least twice the size of the data on both. It looks like it can be configured as a +Concatenated RAID set+ (both drives into a single 2 TB volume), so that should work well.
    Or use TM to back up your OSX drive, and CCC or SD to back-up the media drive.
    The CCC or SD backups usually aren't practical to run more than once a day, so consider them your "secondary" backups.
    Also strongly consider getting something off-site (safe deposit box, workplace, relative's house, etc.), so you're also protected against fire, flood, theft, direct lightning strike on your power lines. Portable external HDs are great for that. Some things may even be appropriate to take to DVDs.
    The problem with that is, there aren't many portables over about 640 GB (LaCie has a 1 TB for either $300 or $400: http://www.lacie.com/us/products/product.htm?pid=11357).
    CCC is donationware, so you can use it free for a while. If you decide to keep it, send them some $$ so they can keep it up to date. SD has a free version, but to do updates (rather than a full replacement) or automatic scheduling, you need the paid version (about $30). Either is available via Google, VersionTracker.com, or MacUpdate.com.

  • How do I install all my old programs and data from an old system folder after I have reinstalled the same OSX system after a crash?

    The system is OSX10.5.8 Leopard on a 2009 imac. A new system was installed from the installation disks and the original system saved to a folder.
    I need to use my Adobe programs, rescue my email, i-tunes and iphoto data.  The disk utility indicates that my Time Machine back-up disk is damaged and I don't want to take a risk of having Time Machine erase my hard drive and try to reinstall the exact system existing at the time of the crash.  There was over 650 gb of stored files that I was copying and removing from the drive at the time it crashed. The total size of the original system file is still about 650 Gb.
    I would prefer to go back in Time Machine and only rescue the programs as most of the files have been copied to external hard drives, but I can't access the back-up hard drive from the new version of the Time Machine.  Or by I don't want the Time Mchine to start copying the new operating system which would include all the data in the old system file. Time Machine was working fine at the time of the crash.

    No, the disk was backed up with time machine a few hours prior to the crash.  I was unable to open the computer when I tried to restart it- got a grey screen with the spinning disk- after a few minutes the screen would go black and would reboot continuously, but not load any images or programs. I started the computer from the 10.5.4 installation disks and checked both the time machine external hard drive and the Imac internal drive with the disk utilities. Both showed as damaged --the internal drive and permissions were repaired, but the external drive (time machine back-up)  was damaged and not repairable by disk utilities. I don't believe that the external drive for Time Machine was connected to the computer at the time of the crash as I was copying files to a different hard drive drive. And I was not having any problems with the TM back-up drive prior to the crash.
    I accessed the Imac internal disk by firewire (as a target disk) and copied as many data files as I had room for on my external hard drives available.  And I deleted quite a few files from the imac internal drive (mostly just jpegs, duplicate tifs, etc--nothing that was used by i-photos, i-tunes or the Mail program).
    Then I installed a new OSX10.5.4 system from the installation disk and the old system was moved to a folder on the hard drive.  I previousy had had the option to reinstall the complete system from Time Machine when I connected that drive and booted with the installation disks with the C key depressed.  But it didn't seem like a good option because I was unsure of the condition of that external disk and whether it would be able to reinstall my data correctly, once it had erased my internal hard drive. 
    I'm considering buying some new external hard drives and backing up the present system to time Machine (so I'll still have my old data in the old system folder).  And then I would try using the old Time Machine back-up to try to reinstall the sytem previous to the crash.  That back-up would reinstall about 700gb of data and operating software and programs which sounds like a lengthy back-up.  Since I have never used Time Machine to do a full reinstallation (I've only used it for individual files), I'm reluctant to do anything rash.
    I'm a professional designer (with a deadline) but I can still use my Illustrator and Photoshop by opening them from the old system folder and saving the files to an external drive.  So it's not neccessary to do anything hasty except to delete some of the excess art and document files that were causing the computer to run slowly and the  Adobe programs to crash when I tried to save my work. I have quite a few books on tape in the i-tumes folder which is probably talking up tons of space but I don't where the i-tunes files live.
    Thanks for any help. Peggy
    Message was edited by: peggy toole

  • Data Recovery from Partitioned and formatted Bit Locker Encrypted Drive

    Recently because of some issues in windows 7 installation from windows 8 installed OS. it was giving as the disc is dynamic windows can not be installed on it. so at last after struggling hard no other solution i partitioned and formatted my whole
    drive so all data gone included the drive which was encrypted by bit lockers.
    For recovery i used many software such as ontrack easy recover, get data back, recovery my files professional edition but still i couldnt able to recover my data from that drive. then i found some suggestion Using CMD to decrypt my data first 
    http://technet.microsoft.com/en-us/library/ee523219(WS.10).aspx
    where it shows it successfully decrypt my data at that moment my drives were in RAW format excluding on which windows is installed and then in CMD i check Chdsk which also shows no problem found. but now problem is still i coudnt able to recover
    my data then i format the drive D and again tried to recover data using above software after decryption still no result. 
    Now i need assistance how i can recover my encrypted drive as it was partitioned and also formatted but decrypted also as i have its recovery key too. thanks

    Hi ,
    I am afraid that we cannot get the data back if the drive has been formatted even if use the
    BitLocker Repair Tool.
    You’d better contact your local data recovery center to try to get data back.
    Tracy Cai
    TechNet Community Support

Maybe you are looking for