IR Object file transport

Hello,
I need help in transporting ir object file from prod to dev.
I exported ir objects in prod and I copy the file from prod to dev.
And I imported it in dev.
and i got successful message.
but ir Objects remain unchanged in dev.
Nothing changed.
Object ID in dev and prod is same.
Somebody help me please?
Thanks very much

Everyone, thank you.
i deleted software component in IR. (dev)
and i imported software component from sld and i imported the file again.
and I finally succeeded in it.
Dev had been shut down. so i had modified Prod unavoidably.
i wanted to copy objects from prod to dev
thank you~~~

Similar Messages

Include Deleted Objects while exporting Namespace in File Transport System

Hi everyone,
What is the use of the option Include Deleted Objects while exporting a namespace using file transport system?
Thanks,
Anu

This is a basic question and should be searched on SDN before posting.
Say, you create a DT in dev and transport it to Test system. In sometime, the requirement changes and now you are supposed to use a WSDL (external def) so no DT / MT will be required and should be deleted. You can delete them in Dev but what will happen to those objects in test - it is not a good practice to delete objects in non-Dev env.
In such situation, you will make these deleted objects part of your transport to test / other env and it will get deleted over there as well.
Hope this answers your query. Make search on SDN / SAP Help for further reading.

Error while Transport objects from DEv to QA-File transport

Hai Experts!
While exporting objects from Dev to Quality using File Transport. it taking long time and no erro msg is thown and it is not getting end .Did any face this problem. Can any one help me to solve this.
Regard's
Preethi.

Hai!
Issue is solved.
I try to export the Individual object -->Message mapping.
While exporting i unchecked the Option With software component version Defenition.
Now it is success. Thanks all replies.
Regard's
Preethi.

File Transport request failed in PI/PO 7.4 dual stack

Dear Experts,
i am transporting from QA to Production Environment of ESR objects through file transport, it is showing import successfull.
but whn i checked the latest version/modified objects those are not reflecting in ESR.
cache is clear and i have checked Cache connectivity test and also CPA Cache full.
Still we are facing are not able to see latest imported version.
Suggest....
Regards,
Kiran Polani

Hi SriGnanaKiran,
If you import the lower version than current version system will ignore the lower version of the object, may be you are importing the lower version of the object.
Also see is there any version conflicts for the object.
Regards,
Praveen.

File transport problem in XI 3.0

Hi,
I am facing an issue in transporting XI objects(JAVA component). When I am using the transport wizard for Export design or configuration objects it's showing me the below error "Error during Export The System can't find the path specified".
Export directory for .tpz file transport is defined as E:\usr\sap\XID\SYS\global\xi\repository_server\export for repository objects and E:\usr\sap\XID\SYS\global\xi\directory_server\export for config objects.
My observation regarding the issue:
Traverse through the following path
XI homepage --> Administration --> General Information.
In File Access tab, Information for Temporary Directory is shown as :(The system cannot find the path specified).
Is there any specific parameter or something in visual administrator through which I could actually set the temporary directory ?
Thanks,
Soumen

Hi Soumen,
The directory path you mentioned is the default one. The error you are facing is since the directory might not exist.
Please look into application server, if unix - login to the server and go to the path and check if it exists using cd command.
If windows, navigate to the folder location.
Next check if the access parameters/permissions are correct. I.E. the folder is not read only. For unix use chmod 777 <folder name> and for windows right click and set the permissions.
Regards,
Souvik

Diffrence between File Transport and CTS+ Transport in PI

Hi Guys,
Can you please explain me the diffrence between File Transport and CTS+ Transport in PI.
What are the advantages of CTS+ Transportation over FILE Transportation...
Thanks,
Siva...

The file transfer will simply export the objects to a TPZ file, allowing you to import on the target system. This requires manual copying and paste of the object and have no further control.
CTS+ on the other side, allows the environment to maintain transport requests with control over objects audit. For example, an object must be created on DEV, then after being developed it must go to QA system and will only be sent to PROD when this object was approved by the respective team on QA. For more information on CTS+, please check the help page below.
http://help.sap.com/saphelp_nwpi71/helpdata/en/9a/775de286874bc78dcb1470bc80f0f9/frameset.htm
Also the documentation below will provide a more complete overview and configuration steps for the CTS+ usage
"http://www.sdn.sap.com/irj/scn/go/portal/prtroot/com.sap.km.cm.docs/library/application-lifecycle-management/lifecycle-management/software-logistics/new%20features%20in%20sap%20enhancement%20package%201%20for%20sap%20netweaver%207.0.pdf"
Please also refer to the SDN thread below
How to move PI objects in IR and ID from DEV to QAS

File Transport: Version conflict.

Hi,
I have a doubt on a particular scenario while transporting object from QA to PRD using File transport.
I have exported a tpz file say 1.tpz from QA with say the following objects
Obj_1(ver 1.0)
Obj_2(ver 1.0)
Obj_3(ver 1.0)
Now before this 1.tpz is imported in PRD few more changes happend to Obj_3 and I exported again a file say 2.tpz
Now this 2.tpz has only Obj_3(ver 2.0)
Now the basis has by mistake Imported this 2.tpz file before importing the 1.tpz file. SO in my PRD the object Obj_3 is existing with a advance version i.e 2.0
Now my doubt is can we Import 1.tpz now in PRD and then again import 2.tpz ?
I am having a feeling that we will definately get in version conflict. Even if I ignore the warning during transport and go ahead with this procedure of importing 1.tpz and then 2.tpz again, will it impact my scenarios.
I am lookign for a quick suggestions.
Regards,
Rahul.

Hi Rahul,
If you import V1 file first & later V2, it will not impact on your scenarion & you wil be able to see latest object in PRD.
But V2 is already imported so import of V1 may not be successful.
You may generate a new export if possible & transport this. It should include all object with their lastest version.
Regards
Sushil

Handle metadata of configuration objects when transported from DEV to QA?

All,
I was reading this blog /people/sravya.talanki2/blog/2005/11/02/overview-of-transition-from-dev-to-qa-in-xi
<i>"Unlike IR when we import the scenarios in ID the configuration metadata will be lost and have to be manually entered in the QA ID. For Ex: Parameters like source directory, filename scheme, FTP server will vanish and have to be entered appropriately as required for QA sand box. After entering the metadata we need to activate all the scenario objects in the ID. After successful activation your interfaces are ready for testing."</i>
From the above I understand there are somethings(like adapter metadata..) that has to be entered manually when the objects are transported from dev to QA.
So my question is, for what all objects of ID needs metadata to be entered manually in QA.
Party?
Business systems(business systems, bus servcies, integration process)?
Communication channels?
Receiver determination?
Interface Determination?
Sender Agreement?
Receiver Agreement?
I appreciate your reply
Thanks
KK

Hi,
first of all it's not adapter's metadata
(adapter's metadata is something completely different)
the "thing" that will dissapear is the adapters'
configuration (configuration of your communication channels) - that's all
RFC destination (idoc adapter) ftp server (file adapter) etc.
basically all you need to do
is to fill it one every system (QAT, PRD etc.)
Regards,
michal

Query on File Transport

Hi Experts,
We are using files as the method of transports. We have 4 environments. Dev, Test, UAT, Prod. We have already done a file transport from Dev to Test. Now we are in the process of moving objects to UAT. The question do we need to do one more round of file transports from Test to UAT or can we reuse the files transported from Dev to Test? Please provide the best possible solution.
Regards,
Vishal

Hi,
For transporting you are using file transport mechanism and once the export has been done you already have a .tpz file for that.So to transport it to UAT environment you dont need to export again,just put the .tpz file in the import folder of UAT and import those objects in IR and ID od tht UAT environment.
cheers,
Abhishek.

How to use a file transport proxy service as trigger for a webservice

Hi,
I've implemented a alsb file transport proxy service. This proxy is watching a common directory and detects new files. After detection, the proxy move them in an archive folder.
After that I want call an external webservice with the filename as input parameter.
How can I comfigure that with the alsb console.
best regards
Oliver
with the to extract the filename after it was renamed by the proxy service.

How do you invoke/ instantiate the file based proxy service. Does it just run on activation in sb console? Does it continue to detect files or does it stop after detecting one file?
Also what is the format of the URL that points to the file folder.
For Ex: I have a folder named "TestFiles" on the C:\drive of the server.
Edited by premkumr at 10/31/2007 3:26 PM

Error 0(Native: listNetInterfaces:[3]) and error while loading shared libraries: libpthread.so.0: cannot open shared object file: No such file or directory

Hi Gurus,
I'm trying to upgrade my test 9.2.0.8 rac to 10.1 rac. I cannot upgrade to 10.2 because of RAM limitations on my test RAC. 10.1 Clusterware software was successfully installed and the daemons are up with OCR and voting disk created. Then during the installation of RAC software at the end, root.sh needs to be run. When I run root.sh, it gave the error: while loading shared libraries: libpthread.so.0: cannot open shared object file: No such file or directory. I have libpthread.so.0 in /lib. I looked up on metalink and found Doc ID: 414163.1 . I unset the LD_ASSUME_KERNEL in vipca (unsetting of LD_ASSUME_KERNEL was not required in srvctl because there was no LD_ASSUME_KERNEL in srvctl). Then I tried to run vipca manually. I receive the following error: Error 0(Native: listNetInterfaces:[3]). I'm able to see xclock and xeyes. So its not a problem with x.
OS: OEL5 32 bit
oifcfg iflist
eth0 192.168.2.0
eth1 10.0.0.0
oifcfg getif
eth1 10.0.0.0 global cluster_interconnect
eth1 10.1.1.0 global cluster_interconnect
eth0 192.168.2.0 global public
cat /etc/hosts
192.168.2.3 sunny1pub.ezhome.com sunny1pub
192.168.2.4 sunny2pub.ezhome.com sunny2pub
192.168.2.33 sunny1vip.ezhome.com sunny1vip
192.168.2.44 sunny2vip.ezhome.com sunny2vip
10.1.1.1 sunny1prv.ezhome.com sunny1prv
10.1.1.2 sunny2prv.ezhome.com sunny2prv
My questions are:
should ping on sunny1vip and sunny2vip be already working? As of now they dont work.
if you look at oifcfg getif, I initially had eth1 10.0.0.0 global cluster_interconnect,eth0 192.168.2.0 global public then I created eth1 10.1.1.0 global cluster_interconnect with setif. Should it be 10.1.1.0 or 10.0.0.0. I looked at the subnet calculator and it says for 10.1.1.1, 10.0.0.0 is the subnet. In metalink they had used 10.10.10.0 and hence I used 10.1.1.0
Any ideas on resolving this issue would be very much appreciated. I had been searching on oracle forums, google, metalink but all of them refer to DOC Id 414163.1 but it does n't seem to work. Please help. Thanks in advance.
Edited by: ayyappa on Aug 20, 2009 10:13 AM
Edited by: ayyappa on Aug 20, 2009 10:14 AM
Edited by: ayyappa on Aug 20, 2009 10:15 AM

a step forward towards resolution but i need some help from the gurus.
root# cat /etc/hosts
127.0.0.1 localhost.localdomain localhost
::1 localhost6.localdomain6 localhost6
192.168.2.3 sunny1pub.ezhome.com sunny1pub
192.168.2.4 sunny2pub.ezhome.com sunny2pub
10.1.1.1 sunny1prv.ezhome.com sunny1prv
10.1.1.2 sunny2prv.ezhome.com sunny2prv
192.168.2.33 sunny1vip.ezhome.com sunny1vip
192.168.2.44 sunny2vip.ezhome.com sunny2vip
root# /u01/app/oracle/product/crs/bin/oifcfg iflist
eth1 10.0.0.0
eth0 192.168.2.0
root# /u01/app/oracle/product/crs/bin/oifcfg getif
eth1 10.0.0.0 global cluster_interconnect
eth0 191.168.2.0 global public
root# /u01/app/oracle/product/10.1.0/Db_1/bin/srvctl config nodeapps -n sunny1pub -a
****ORACLE_HOME environment variable not set!
ORACLE_HOME should be set to the main directory that contain oracle products. set and export ORACLE_HOME, then re-run.
root# export ORACLE_BASE=/u01/app/oracle
root# export ORACLE_HOME=/u01/app/oracle/product/10.1.0/Db_1
root# export ORA_CRS_HOME=/u01/app/oracle/product/crs
root# export PATH=$PATH:$ORACLE_HOME/bin
root# /u01/app/oracle/product/10.1.0/Db_1/bin/srvctl config nodeapps -n sunny1pub -a
VIP does not exist.
root# /u01/app/oracle/product/10.1.0/Db_1/bin/srvctl add nodeapps -n sunny1pub -o $ORACLE_HOME -A 192.168.2.33/255.255.255.0
root# /u01/app/oracle/product/10.1.0/Db_1/bin/srvctl add nodeapps -n sunny2pub -o $ORACLE_HOME -A 192.168.2.44/255.255.255.0
root# /u01/app/oracle/product/10.1.0/Db_1/bin/srvctl config nodeapps -n sunny1pub -a
VIP exists.: sunny1vip.ezhome.com/192.168.2.33/255.255.255.0
root# /u01/app/oracle/product/10.1.0/Db_1/bin/srvctl config nodeapps -n sunny2pub -a
VIP exists.: sunny2vip.ezhome.com/192.168.2.44/255.255.255.0
Once I execute the add nodeapps command as root on node 1, I was able to get vip exists for config nodeapps on node 2. The above 2 statements resulted me with same values on both nodes. After this I executed root.sh on both nodes, I did not receive any errors. It said CRS resources are already configured.
My questions to the gurus are as follows:
Should ping on vip work? It does not work now.
srvctl status nodeapps -n sunny1pub(same result for sunny2pub)
VIP is not running on node: sunny1pub
GSD is not running on node: sunny1pub
PRKO-2016 : Error in checking condition of listener on node: sunny1pub
ONS daemon is not running on node: sunny1pub
[root@sunny1pub ~]# /u01/app/oracle/product/crs/bin/crs_stat -t
Name Type Target State Host
ora....pub.gsd application OFFLINE OFFLINE
ora....pub.ons application OFFLINE OFFLINE
ora....pub.vip application OFFLINE OFFLINE
ora....pub.gsd application OFFLINE OFFLINE
ora....pub.ons application OFFLINE OFFLINE
ora....pub.vip application OFFLINE OFFLINE
Will crs_stat and srvctl status nodeapps -n sunny1pub work after I upgrade my database or should they be working now already? I just choose to install 10.1.0.3 software and after running root.sh on both nodes, I clicked ok and then the End of installation screen appeared. Under installed products, I see 9i home, 10g home, crs home. Under 10g home and crs home, I see cluster nodes(sunny1pub and sunny2pub) So it looks like the 10g software is installed.

Cannot open shared object file: on Informatica Power Centre(8.1.1) Installa

Hi Friends,
I am trying to install Informatica Power Centre 8.1.1 and when i invoke the installet it' giving below error:
My OS is Redhat Linux (64 bit).
What's the issue?
onfiguring the installer for this system's environment...
awk: error while loading shared libraries: libdl.so.2: cannot open shared object file: No such file or directory
dirname: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
/bin/ls: error while loading shared libraries: librt.so.1: cannot open shared object file: No such file or directory
basename: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
dirname: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
basename: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
Launching installer...
grep: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
/tmp/install.dir.28135/Linux/resource/jre/jre/bin/java: error while loading shared libraries: libpthread.so.0: cannot open shared object file: No such file or directory
[oracle@obidb PowerCenter_8.1.1_SE_for_Linux_x64_64Bit]$
Regards,
DB

Hi;
I am in the process of installing R12.1.1 on RHEL5(64-bit). All the pre-req have been done.. I did the installation twice but I am facing the same issue. When i try to run adconfig.sh on the appsTier. i get the following errorYou want to run adconfig.sh on appstier or dbtier?
If you run appstier be sure you source env file with applmgr user
Regard
Helios

Cannot open shared object file: on Informatica Power Centre Installation

Hi Friends,
I am trying to install Informatica Power Centre 8.1.1 and when i invoke the installet it' giving below error:
My OS is Redhat Linux (64 bit).
What's the issue?
onfiguring the installer for this system's environment...
awk: error while loading shared libraries: libdl.so.2: cannot open shared object file: No such file or directory
dirname: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
/bin/ls: error while loading shared libraries: librt.so.1: cannot open shared object file: No such file or directory
basename: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
dirname: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
basename: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
Launching installer...
grep: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
/tmp/install.dir.28135/Linux/resource/jre/jre/bin/java: error while loading shared libraries: libpthread.so.0: cannot open shared object file: No such file or directory
[oracle@obidb PowerCenter_8.1.1_SE_for_Linux_x64_64Bit]$
Regards,
DB

Hi;
I am in the process of installing R12.1.1 on RHEL5(64-bit). All the pre-req have been done.. I did the installation twice but I am facing the same issue. When i try to run adconfig.sh on the appsTier. i get the following errorYou want to run adconfig.sh on appstier or dbtier?
If you run appstier be sure you source env file with applmgr user
Regard
Helios

How to add Objects to transport request through FM/BAPI?

Hi All,
I am creating a workbench request through program. I am able to create it by using BAPI but i am unable to add objects to it through program.
Can anybody tell me the funcion module/bapi to add object to transport request?
i have the list of objects that are suppose to be added.
No BDC please.
Thanks ,
Swarup

Hi Swarup,
Check FM TRINT_MODIFY_COMM. Also look at program TH_TKANL for the usage of FM.
Thanks
Lakshman

File Adapter or File Transport which one will give more performance

Hi all,
File Adapter or File Transport which one will give more performance ? in OSB?
Which one to select any one did performance analysis?
Thanks
Phani

Why don't you just go read some benchmarks?
http://www.barefeats.com/mbpp18.html

IR Object file transport

Similar Messages

Maybe you are looking for