IRecruitment Create Vacancy: Move the Position Field

Hello all,
I was wondering if anyone knows how or if we can move the position field on the Create Vacancy: Vacancy Details page. We are unable to reorder the page using personalizations and we are strictly avoiding customizations, but the position field is in place where it just doesn't make sense.
In some cases, users will select a position, which populates the job, organization and location fields. But on the page it is after all of these fields, which doesn't make sense. Also, the position LOV is empty if org and location are already selected. We can get around this by selecting position first, but it is 10th or so field on the page.
Does anyone have any ideas on how we can accomplish this without customization? I don't think it is possible, but I thought I would get some feedback first.
Thanks,
Mark

Dear Charlie,
Thanks for your reply, but i still have the same problem.
Actually i am creating new rule with the below conditions:-
Category : For Your Information
Conditions:
VACANCY_INSERT_OR_UPDATE in (INSERT)
VACANCY_RULE_TYPE in (CUSTOM_RULE)
Action:
approval-group chain of authority Require approval from HR Africa Coordinators
Actually this rule is working fine and sending notification but my problem is that when creating the vacancy, its saying that vacancy submitted for approval which is wrong, i needed it to be created automatically.

Similar Messages

Unable to use copied iRecruitment Create Vacancy Functions

Hi,
I am trying to create 2 versions of the iRecruitment 'Create Vacancy' process, so I want to duplicate the standard functions and do function level personalizations to amend my new process (i.e. remove some of the train steps and others). I have created new functions, menus, permissions, and set profile options, but cannot invoke the copied functions.
I will simplify the issue below with limited setup to see if anyone else can help:
Seeded Create Vacancy Process:
Navigation - iRecruitment Recruiter > iRecruitment Home > New Vacancy (sidebar link) > Create vacancy page
Click personalize this page - the function context is:
Irc Vacancy Details - Create (IRC_VAC_DETS_NEW)
I want to have a duplicate process that invokes a copied function to allow me to make function level personalizations on this process.
Setup steps taken:
Make copy of function
XX_IRC_VAC_DETS_NEW
XX Irc Vacancy Details - Create
Parameters: OAFunc=XX_IRC_VAC_DETS_NEW&pAMETranType=IRCVACAPPROVAL&pAMEAppId=800&pProcessName=HR_GENERIC_APPROVAL_PRC&pItemType=HRSSA&pCalledFrom=XX_IRC_VAC_DETS_NEW&pApprovalReqd=YD&pNtfSubMsg=IRC_VACANCY_APPROVAL_NEW&pConcAction=N
Web HTML:
OA.jsp?page=/oracle/apps/irc/vacancy/webui/VacNewDetsPG&akRegionApplicationId=821
Add to IRC Manager Functions Menu menu (IRC_MANAGER_OTHER)
This original function was invoked when clicking the function Irc CM Home Page Create Vacancy (IRC_CM_HOME_CREATE_VACANCY) from the IRC Manager Side Nav (IRC_MANAGER_SIDE_NAV) menu, so also need to duplicate that function. However, this function calls another function IRC_VAC_NEW_LAUNCH_WF, so I need to duplicate that one as well:
XX_IRC_CM_HOME_CREATE_VACANCY
XX Irc CM Home Page Create Vacancy
Parameters:
Web HTML:
javascript:void submitForm('DefaultFormName',1,{IrcAction:'createVacancy',IrcActionType:'Link',IrcActionValue:'XX_IRC_VAC_NEW_LAUNCH_WF',IrcFunction:'IRC_CM_VACANCY_SEARCH'})
Add the copied function to IRC Manager Side Nav (IRC_MANAGER_SIDE_NAV) menu giving the prompt:
"New Vacancy 2"
IRC_VAC_NEW_LAUNCH_WF
Irc Vacancy New Launch Workflow
Parameters:
OASF=XX_IRC_VAC_NEW_LAUNCH_WF&OAHP=IRC_MANAGER_APPL
Web HTML:
OA.jsp?page=/oracle/apps/irc/vacancy/webui/ReqLaunchWfPG&akRegionApplicationId=821&WFItemType=IRC_WF&WFProcess=XX_IRC_VACANCY_NEW_V3
Add the copied function to IRC Manager Functions Menu (IRC_MANAGER_OTHER)
This final function launches a workflow process, so I have also copied that (IRC_VACANCY_NEW_V3 --> XX_IRC_VACANCY_NEW_V3) and referenced it in the function.
In Workflow builder I have amended the 'Vacancy New Details Page Function' node attribute in the workflow to the first copied function: XX_IRC_VAC_DETS_NEW
This is seemingly all the setup necessary to invoke the copied function from the IRC Manager Side Nav (IRC_MANAGER_SIDE_NAV) menu, however when running through the system, the seeded function is still called:
Navigation - iRecruitment Recruiter > iRecruitment Home > New Vacancy 2 (new sidebar link) > Create vacancy page
Click personalize this page - the function context is still:
Irc Vacancy Details - Create (IRC_VAC_DETS_NEW)
Can anyone help? Has anyone managed to use a copied function / copied workflow in iRecruitment Create Vacancy?
Regards,
Michael

Hi,
We have not tried to do this but I believe this is possible. I had several conversations with Oracle support about the menus/functions delivered and how changes keep affecting our system so often and the suggested approach was to copy the functions/menus so that there is no interference from what oracle might deliver in future. And in that sense, yes the copy functions should work.
I went through your post carefully and could not pick any obvious steps missed. Please ask your DBA team to bounce the concurrent tier also on your apps server/database along with a restart of all services and see if the context still switches back. However, as part of some new development, I will be doing something similar in iRec and will keep this thread updated with what I find.
Sorry, couldn't be of more help.
Regards,
Vinayaka

Urgent: move the created_by field to preq_name for PR in srm

Hi All ,
I need to move the created_by field into preq_name field when creating Shopping cart in SRM the backend PR will create .
I need it urgently..
Thanks in Advance,
Prashnath.

Hi,
You can try to create a new standard view, then select “created by” and “modified by” column under columns, next apply this view, finally check the effect.
Did you customize the permissions of the list or document library? Did you customize the permission of the item? For example, break the permission inheritance form its parents. If so, try to inherit permission from its parents, after that create a new standard view according to the steps above, then check the effect.
By default, permissions on lists, libraries, folders, items, and documents are inherited from the parent site. However, you can break this inheritance for any securable object at a lower level in the hierarchy by editing the permissions on that securable object (that is, creating a unique permission assignment) . For example, you can edit the permissions for a document library, which breaks the permissions inheritance from the site.
You can also try to create a new document library, then create a new document with user A, after that log into with user B, check the effect.
For more information about SharePoint : page level permissions, please refer to the following article:
SharePoint : page level permissions
http://blogs.msdn.com/brettrobinson/archive/2009/04/24/sharepoint-page-level-permissions.aspx
For more information about control access to sites, please look into the following articles:
About controlling access to sites and site content
http://office.microsoft.com/en-us/sharepointtechnology/HA101001441033.aspx
Permission levels and permissions
http://office.microsoft.com/en-us/sharepointtechnology/HA101001491033.aspx
For more information about how to create a view, please refer to the following article:
Create or change a view
http://office.microsoft.com/en-us/help/HA100215771033.aspx
Hope this helps.
Rock Wang
Rock Wang– MSFT

How to move the position line to the "snape" ?

I want to move the position line as the "snape" function ? I want to move the position line to the very beginning of objects .

Forgot to add, 3 "gold dust key commands" ( extemporising on my good neighbour iS) ....
1 - Click on a region then use Key Command "Set Locators by region"
2 - "Go to left locator"... zips the Song Position Line to the very beginning of region
3 - "Go to right locator" ...zips the Song Position Line to the very end of region
... when I was first introduced to these commands in late 1998... after struggling with Logic for 6 months, I nearly fainted with relief and delight
Good luck young man
Powerbook 5,8 - LP7.1.1 Mac OS X (10.4.9) 1.67 GHz PowerPC G4, 1.5GB SDRAM

IRecruitment - Create Vacancy

Hi
I want to show the budgeted headcount details after the position is selected in the create vacancy page. Based on the selected position, the system queries the budgeted information. How can I do this?
Thanks in advance.
MAK

If the underlying ViewObject (VO) returns the budgeted headcount in this page you would be able to identify the attribute and add it as an item through personalisation. However, the chances are that it is not returned by the VO! In which case you would need to do some customisation using OA Framework development to extend the VO.
To see the contents of a VO, look for the *'About this page'* link in the bottom left hand corner of your page. Click it and then select the Page tab. On this page, find the Business Component References region and expand it. This will show you all the VOs used on this page. The Page Definition region (above it) will show you which VOs are used in which regions of the page. Find the one most appropriate for your data and click on it. This will show you the actual VO code and the attributes it returns.
Regards
Tim

IRecruitment Create Vacancy Approval need to change

Hi All,
I need to change the approval style of Create Vacancy, currently it is configured as follows
1. Approver 1 approves the vacancy
2 . Approver 2 Finally approves the vacancy after approver 1.
Now the change is the on level 1 we need to four approver who ever first approve the vacancy it goes to level 2 and on this level there would be two approvers whoever approves the vacancy no need for all in both level.
kindly tell me how can I configure Rules , Attributes, Conditions , actions and approver groups in AME business Analyst Resp.
Regards,

I have edited one of the Rules created in Transaction Type: iRecruitment Vacancy Approval. Under the Actions Section, I have added the approver 2,3,4
Action Type Action
approval-group chain of authority Require approval from APPROVER 1
approval-group chain of authority Require approval from APPROVER 2
approval-group chain of authority Require approval from APPROVER 3
approval-group chain of authority Require approval from APPROVER 4
approval-group chain of authority Require approval from HEAD_OF_HR1
approval-group chain of authority Require approval from HEAD_OF_HR2
but due to this change the approval is going to be in the sequential direction, for example APPROVER 1, APPROVER 2,3,4 then HEAD OF HR1,2 instead we need who ever approve first then it goes to 2nd level and approved by one of the head of hr as I mentioned above. Kindly tell me this action type I am using for this is correct or should we need to create another action type or should we need to amend approver group SQL statement or any other way which we can acheive the desired goal. I am looking forward to listen you soon and thanks in advance for you support
Edited by: user11969686 on Dec 11, 2009 6:26 AM

How can i move the position of the element in Script From ?

Dear Guru ,
I am developing one SCRIPT FORM for the purchase order in ECC6 system .
And i found it is very diffult to move the element position because i am adding the space in the editor for the position moving ...
Please see my stupid code :
/E           ITEM_HEADER_F
UL           &ULINE(105)&
IL           Item    Material    Description                               Unit   Qty
              Price   Per      Net Value Delivery Date
UL           &ULINE(105)&
IL           &EKPO-EBELP&   &EKPO-MATNR&       &EKPO-TXZ01&
                                      &EKPO-MEINS& &EKPO-MENGE& &EKPO-NETPR&
            &*T006A-MSEHT& &EKPO-NETWR& &EKET-EEIND&
I thought there must have another good idea to control the posiion of the element in script form editor .
Has someone knew that ?
Thanks a lot .
Best Regards,
Carlos

Hi Carlos,
Tabs :
You can define as many tab positions as you require for each paragraph format. The text can be aligned in different ways:
u2022     Left-aligned with LEFT
u2022     Right-aligned with RIGHT
u2022     Centered with CENTER
u2022     At the sign with SIGN
u2022     At the comma or decimal point with DECIMAL
You can control the tab feed in a paragraph with tab positions. The tab stops you define in the paragraph format replace the tab spacing you defined in the header data of the form.
The tab stops are represented as, , in the text editor.
Eg:
/E ITEM_HEADER
IL <TI>Item,,Material,,Description</>
IP <TI>,,,,Quantity,,,,Price,,Price unit,,,,,,Value</>
/ &ULINE(71)&
/E ITEM_LINE
IL &VBDPA-POSNR&,,&VBDPA-MATNR&,,&VBDPA-ARKTX&
,,&VBDPA-IDNKD& &VBDPA-POSEX&
Regards,
Chandra Kavali

MOVE THE SECOND FIELD VALUES

hi guys,
I am uploading the data for open AR items from an PIPE delimiter file. I read the data into an internal table and spilit the data at pipe delimiter.... now I have to do some validations.
There is one trailer record at the end in the file. In that trailer record I get the number of records in the second field like
9|20|100.000|10.000|        here 20 is the number of records
if it is a standard structure file then i can write the logic as
IF V_FNAME1 NE 'X'.
    DESCRIBE TABLE I_FILEDATA1 LINES V_FILEDATA1.
    READ TABLE I_FILEDATA1 INTO WA_FILEDATA1 INDEX V_FILEDATA1 .
    MOVE WA_FILEDATA1+2(5) TO V_LINES1 .
    IF V_FILEDATA1 NE V_LINES1.
      MESSAGE 'NUMBER OF LINES READ ARE NOT SAME' TYPE 'E'.
    ENDIF.
ENDIF.
In the above logic i counted the number of records and compared that number with the number of records given in the trailer record (20)
how to modify this logic if the file is a pipe delimiter file.....
how to capture that value into one variable can any one guide me please......
SRI

Are you planning to do this within the previous READ_FILE_DATA subroutine or outside? Is your trailer record always of the same structure in all the 3 files? If so, you can declare a new structure as follows and insert this code in your subroutine where you upload the file, after the records are appended to itab_file.
data: begin of wa_trailer,
        rec_type,
        count(10) type n,
        field1(?) type c,
        field2(?) type c.
data: end of wa_trailer.
Now in your subroutine, after itab_file is filled up insert this code
describe table itab_file lines v_rec_count.
v_rec_count = v_rec_count - 1.
read table itab_file into wa_trailer index v_rec_count.
if v_rec_count <> wa_trailer-count.
error.
endif.
Here I am assuming that the count 20 you have is not including the trailer record. If it is also included, then remove the "v_rec_count = v_rec_count - 1." sentence.

Can i move the position of submenu? The SpryMenuBar

Please see the pic! thank you !

I'm not sure what you mean, but I know there are horizontal and vertical menu's, and you have to move the editable region in the template to move the input on the pages. Hope it answers your question.

IRecruitment Create Vacancy Approval Notifications

Hi,
I have a client that wishes me to modify the content of the Approval Notification/Message sent to the approver. Is this possible and how to you do it?
In the User Guide it mentions using Application Developer and changing the messages but it is very limited and does not allow me to change this particular message.
I have looked at the workflow 'HRSS' but it uses the generic approvals workflow but I can't see how it generates the message. It mentions in the User Guide to use XML and business events but again gives very little detail.
Can anyone provide more information on how to do this?
Cheers

I have edited one of the Rules created in Transaction Type: iRecruitment Vacancy Approval. Under the Actions Section, I have added the approver 2,3,4
Action Type Action
approval-group chain of authority Require approval from APPROVER 1
approval-group chain of authority Require approval from APPROVER 2
approval-group chain of authority Require approval from APPROVER 3
approval-group chain of authority Require approval from APPROVER 4
approval-group chain of authority Require approval from HEAD_OF_HR1
approval-group chain of authority Require approval from HEAD_OF_HR2
but due to this change the approval is going to be in the sequential direction, for example APPROVER 1, APPROVER 2,3,4 then HEAD OF HR1,2 instead we need who ever approve first then it goes to 2nd level and approved by one of the head of hr as I mentioned above. Kindly tell me this action type I am using for this is correct or should we need to create another action type or should we need to amend approver group SQL statement or any other way which we can acheive the desired goal. I am looking forward to listen you soon and thanks in advance for you support
Edited by: user11969686 on Dec 11, 2009 6:26 AM

How do you easily move the position of a photo in an album?

Want to move a photo from the last position in an album to the first. Tried cut paste/tried drag/havent found the answer. Thanks, photogranny

In albums (not smart albums) you simply select the album in the source pane on the left and drag the photos where you want them in the view window on the right
LN

How to create colums with the same Field

Hello every body,
I have this report only with one field how i can create columns in base of rows for example some times this field containing 40 rows then I need to create 2 columns of 20 that when is even or 15 then create 2 columns one with 8 rows and the other with 7.

you can try making the report layout with multiple section. Please the field in detail section and right cick on the detail section and go to section expert and select the option "format with multiple columns" and then go to layout tab and select the each column width and select the printing direction option as down then across and click on OK.
Now you will be able to see the multi column report.
regards,
Raghavendra.G

CREATING CALCULATION ON THE SAME FIELD

I want to create a calculation where I can get the movement in balance from one period to the next (the periods are specified in parameters), eg End balance sum of Dec 07 less End balance sum of Mar 08.
There is a similar query where I want to compare the balances held in different sets of books. eg End balance sum of sob id 93 less End balance sum of sob id 94.
Would appreciate any pointers. Thanks

create table t(d date, n number, t varchar2(40));
alter session set nls_date_format='DD.MM.RR';
insert into t values (to_date('01/01/05'),1000,'credit');
insert into t values (to_date('02/01/05'),500,'credit');
insert into t values (to_date('02/01/05'),200,'debit');
insert into t values (to_date('01/01/05'),2000,'debit');
insert into t values (to_date('01/01/05'),3000,'debit');
insert into t values (to_date('01/01/05'),12,'credit');
insert into t values (to_date('02/01/05'),12,'credit');
select d,
    sum(n*instr(t,'debit')) debit,
    sum(n*instr(t,'credit')) credit
from t
group by d;
D             DEBIT     CREDIT
01.01.05       5000       1012
02.01.05        200        512

I can't move the position of my nautilus windows

sorryy for this newbie question,but i wanna ask how i can move my windows to see the wobbly windows effect? i have enable it at compiz seeting manager and still i cant move my windows.thank u

This is not funny, I can't grab and move any windows when compiz is active. Anybody has any idea, where there can be a problem?

An attempt was made to move the position before the beginning of the stream

The report runs, but when the user clicks an item on the navigation tree the error appears.

Hi Paty,
Please let us know if there any update. If your problem is fixed, please share your solution here. If not, you can provide more info to elaborate your
scenario so that we can help you further.
Best regards,

IRecruitment Create Vacancy: Move the Position Field

Similar Messages

Maybe you are looking for