Is 10.2.0.2 .patch_storage still needed after 10.2.0.3 upgrade
I still have 1 GB in .patch_storage in the 10.2.0 Oracle Home after upgrading from 10.2.0.2 to 10.2.0.3. Can I delete it if I have not applied any 10.2.0.3 interim patches yet, or at least the ones that do not appear in the Inventory? I guess 2 interim patches get installed during the 10.2.0.3 patch installation.
Oracle Client 10.2.0.1.0
Oracle Database 10g 10.2.0.1.0
Oracle Database 10g Products 10.2.0.1.0
Oracle Database 10g Release 2 Patch Set 1 10.2.0.2.0
Oracle Database 10g Release 2 Patch Set 2 10.2.0.3.0
There are 5 products installed in this Oracle Home.
Interim patches (2) :
Patch 5556081 : applied on Tue May 01 18:46:20 PDT 2007
Created on 9 Nov 2006, 22:20:50 hrs PST8PDT
Bugs fixed:
5556081
Patch 5557962 : applied on Tue May 01 18:46:12 PDT 2007
Created on 9 Nov 2006, 23:23:06 hrs PST8PDT
Bugs fixed:
4269423, 5557962, 5528974
I think you can delete patch applied and not applied both, Because these patch belong to 10.2.0.2 and you already upgraded oracle to 10.2.0.3.
Usually people keep old oracle home and patches for 3/6 Month before deleting it.
Cheer,
Virag
Similar Messages
-
THE SHORTER STORY
My goal is to successfully use my existing Time Capsule (TC) with a new and more powerful wireless router. I need a new and more powerful wireless router in order to reach a distant Denon a/v receiver that is physically located in a master bedroom some 50 feet away from my modem. I need to provide this Denon a/v receiver with an Internet connection so that it can obtain its firmware updates and I need to connect this Denon a/v receiver to my network in order to use its AirPlay feature. I believe l still need the TC's Network Attached Storage (NAS) features because I am not sure if the new wireless router will provide me with the NAS like features / capabilities I need to share files between my two Apple laptops with OS X 10.8.2. And I know that I absolutely need my TC's seamless integration with Apple's Time Machine (TM) application in order to continue to make effortless backups of my two Apple laptops. To my knowledge nothing works with TM like Apple's TC. I also need the hard disk storage space built into the TC.
I cannot use a long wired Ethernet cable connection in this apartment and I cannot use power-line adapters. I have read that wireless range extenders and repeaters are difficult to successfully set-up and that they will reduce data speeds, especially so when incorrectly set-up. I cannot relocate my modem and/or primary base station wireless router.
In short, I want to use my TC with my new and more powerful wireless router. I need to stop using the TC to connect to the modem. However, I still need the TC for seamless TM backups. I also need to use the TC's built in hard drive for storage. And I may still need the TC's NAS capabilities to share files wirelessly between laptops because I am assuming the new wireless router will not provide NAS capabilities for OS X 10.8.2 (products like this/non-Apple products rarely seem to work with OS X 10.8.2/Macs to provide NAS features and capabilities). Finally, I want to continue to use my Apple laptop and AirPlay to wirelessly access and play my iTunes music collection stored on the TC's hard drive. I also want to continue to use my Apple laptop, AirPlay and Apple TV to wirelessly watch movies and TV shows stored on the additional external hard drive connected to the TC via USB. Can someone please advise on how to set-up my new Asus wireless router with my existing TC in such a way to accomplish all of this?
What is the best configuration or set-up to accomplish my above goals?
Thank you in advance for your assistance!!!
THE FULL STORY
I live in an apartment building where my existing Time Capsule (TC) is located in my living room and serves many purposes. Specially, my TC is at least all of the following:
(1) Wi-Fi router connected to Comcast Internet service via Motorola SB6121 cable modem - currently the TC is the Wi-Fi base station that connects to the modem and has the gateway address to the Internet. The TC now provides the DHCP service for the Wi-Fi network.
(2) Wireless router providing Internet and Wi-Fi network access to several Wi-Fi clients - two Apple laptop computers, an iPod touch, an iPad and an iPhone all connect wirelessly to the Internet via the TC.
(3) Wired Ethernet router providing Internet and Wi-Fi network access to three different devices - a Panasonic TV, LG Blu-Ray player and an Apple TV each use one of the three LAN ports on the back of the TC to gain access to the Internet.
(4) Primary base station in my attempt to extend my wireless network to a distant (located far away) Denon a/v receiver requiring a wired Ethernet connection - In addition to the TC, which is my primary base station, I am also using a second extended Wi-Fi base station (a Netgear branded product) to wirelessly extend my WiFi network to a Denon receiver located in the master bedroom and requiring a wired Ethernet connection. I cannot use a wired Ethernet connection to continuously travel from the living room to the master bedroom. The distance is too great as I cannot effectively hide the Ethernet cable in this apartment.
(5) Time Machine (TM) backup facilitator - I use my TC to wirelessly back-up two Apple laptops using Apple's Time Machine (TM) application. However, I ran out of storage space on my TC and therefore added external storage to it. Specifically, I added an external hard drive to my TC via the USB port on the back of the TC. I now use this added external hard drive connected to the TC via USB as the destination storage drive for my TM back-ups. I have partitioned the added external hard drive, and each of the several partitions all have enough storage space (e.g., each of the two partitions used by TM are sized at three times the hard drive space of each laptop, etc.). Everything works flawlessly.
(6) Network Attached Storage (NAS) - In addition to using the TC's Network Attached Storage (NAS) capabilities to wirelessly back-up two Apple laptops via TM, I also store other additional files on both (A) the hard drive built into the TC and (B) the additional external hard drive connected to the TC via USB (there are additional separate partitions on this drive for these other additional and non-TM backup files).
I use the TC's NAS feature with my Apple laptop and AirPlay to wirelessly access and play my iTunes music collection stored on the TC's hard drive. I also use my Apple laptop, AirPlay and Apple TV to wirelessly watch movies and TV shows stored on the additional external hard drive connected to the TC via USB. Again, everything works wirelessly and flawlessly. (Note: the Apple TV is connected to the network via Ethernet and a LAN port on the back of the TC).
The issue I am having is when I try to listen to music via Apple's AirPlay in the master bedroom. This master bedroom is located at a distance of two rooms away from the TC's current location in the living room, which is a distance of about 50 feet. This apartment has a long rectangular floor plan where each room is connected to the next in a straight line. In order to use AirPlay in the master bedroom I am using a second extended Wi-Fi base station (a Netgear branded product) to wirelessly extend my WiFi network to a Denon receiver located in the master bedroom and requiring a wired Ethernet connection. This additional base station connects wirelessly to the WiFi network provided by my TC and then gives my Denon receiver the wired Ethernet connection it needs to use AirPlay. I have tried moving my iTunes music directly onto my laptop's hard drive, and then I used AirPlay on this same laptop to connect to the Denon receiver. I always get a successful connection and the song plays, but the problem is that the connection inevitably drops.
I live in an apartment building and all of the many wireless routers in this building create a great deal of WiFi interference on both the 2.4 GHz and 5GHz bands. I have tried connecting the Netgear product to each the 2.4 and 5 GHz bands, but neither band can successfully maintain a wireless connection between the TC and the Netgear product. I also attempted to maintain a wireless connection to an iPod touch using the 2.4 GHz band and AirPlay on this iPod touch to play music on the Denon receiver. Again, I was able to establish a connection and successfully play music, but after a few minutes the connection dropped and the music stopped playing. I therefore have concluded that I have a poor wireless connection in the master bedroom. I can establish a connection, but it is intermittent with frequent drops. I have verified this with both laptops by working in the master bedroom for an entire day on both laptops. The Internet connection in this master bedroom proved to drop out frequently - about once an hour with the laptops. The wireless connection and the frequency of its dropout are far worse with the iPod touch and an iPhone.
I cannot relocate the TC. Also, this is an apartment and I therefore cannot extend the range of my network with Ethernet cable (I cannot drill through walls/ceilings, etc.). It is an old building with antiquated wiring and power-line adapters are not likely to function properly, nor can I spare the direct power outlet required with a power-line adapter. I simply need every outlet I can get and cannot afford to block any direct outlet.
My solution is to use a more powerful wireless router. I found the ASUS RT-AC66U Dual-Band Wireless-AC1750 Gigabit Router which will likely provide a better connection to my wireless Internet in the master bedroom than the TC. The 802.11ac band of this Asus wireless router is totally useless to me, but based on what I have read I believe this router will provide a stronger connection at greater distances then my TC. And I will be ready for 802.11ac when it becomes more widely available.
However, I still need to maintain the TC's ability to work seamlessly with TM to backup my two laptops. Also, I doubt the new Asus router will provide OS X 10.8.2 with NAS like features and capabilities. Therefore, I still would like to use the TC's NAS capabilities to share files on my network wirelessly assuming the Asus wireless router fails to provide this feature. I need a new and more powerful wireless router, but I need to maintain the TC's NAS features and seamless integration with TM. Finally, I want to continue to use my Apple laptop and AirPlay to wirelessly access and play my iTunes music collection stored on the TC's hard drive. I also want to continue to use my Apple laptop, AirPlay and Apple TV to wirelessly watch movies and TV shows stored on the additional external hard drive connected to the TC via USB. Can someone advise on how to set-up my existing TC with this new Asus wireless router in such a way to accomplish all of this?
Modem
Motorola SB6121 SURFboard DOCSIS 3.0 Cable Modem
Existing Wireless Router and Primary Wi-Fi Base Station - Apple Time Capsule
Apple Time Capsule MC343LL/A 1TB Sim DualBand (purchased June 2010, likely the Winter 2009 Model)
Desired New Wireless Router and Primary Wi-Fi Base Station - Non-Apple Asus
ASUS RT-AC66U Dual-Band Wireless-AC1750 Gigabit Router
Extended Wi-Fi Base Station - Provides an Ethernet Connection to a Denon A/V Receiver Two Rooms Away from the Modem
Netgear Universal Dual Band Wireless Internet Adapter for TV & Blu-Ray (WNCE3001)
Addition External Hard Drive Attached to the Existing Apple Time Capsule via USB
WD My Book Studio 4TB Mac External Hard Drive Storage USB 3.0
Existing Laptops on the Wireless Network Requiring Time Machine Backups
MacBook Air (11-inch, Mid 2012) OS X 10.8.2
MacBook Pro (13-inch Mid 2010) OS X 10.8.2
Other Existing Apple Products (Clients) on the Wireless Network
iPod Touch (second generation) is model A1288.
iPad (1st generation)
Apple TV (3rd generation) - Quantity two (2)Thanks Bob Timmons.
In regards to a Plan B, I hear ya brother. I am already on what feels like Plan Z. Getting WiFi to a far off room in an apartment building crowded with WiFi routers is a major pain.
I am basing my thoughts on the potential of a new and more powerful router reaching the far off master bedroom based on positive reviews on cnet.com, pcmag.com and pcworld.com. All 3 of these web sites have reviewed the Asus RT-AC66U 802.11AC wireless router as well as its virtual twin cousin 802.11n router. What impressed me is that all 3 sites rated this router #1 overall in terms of both range and speed (in both the 802.11n and 802.11AC flavors). They tested the router in real world scenarios where the router needed to compete with a lot of other wireless routers. One of the sites even buried this Asus router in a media room with thick walls and inside a media cabinet. This Asus router should be able to serve my 2.4 GHz band wireless clients (iPod Touch and iPhone 4) with a 2.4GHz Wireless-N band offering some 50 feet of dependable range and a 60 Mbps throughput at that range. I am hoping that works, but it's borderline for my master bedroom. My 5 GHz wireless clients (laptops) will enjoy a 5GHz Wireless-N band offering 150 feet of range and a 200 Mbps throughput at that range. I have no idea what most of that stuff means, but I did also read that Asus could reach 300 feet and I got really excited. My mileage may vary of course and I'm sure I'm making some mistakes in my interpretation of their data. However, my Winter 2009 Time Capsule was rated by cnet.com to deliver real world performance of less than that, and 802.11AC may or may not be useful to me someday. But when this Asus arrives and provides anything other than an excellent and consistent wireless signal without drops in the master bedroom it's going right back!
Your solution sounds great, but I have some questions. I'm using OS X 10.8.2 and Airport Utility (version 6.1 610.31) and on its third tab labeled "Wireless" the top option enables you to set "Network Mode" to either:
Create a wireless network
Extend a wireless network
Off
Given your advice to "Turn off the wireless on the TC," should I set Network Mode to Off? Sorry, I'm clueless in regards to how to turn off the wireless on the TC any other way. Can you provide specific steps on how to turn off the wireless on the TC? If what I wrote is correct then what should the rest of this Wireless tab look like, or perhaps it is irrelevant when wireless is off?
Next, what do you mean by "Configure the TC in Bridge Mode?" Under Airports Utility's fourth tab labeled "Network" the top option "Router Mode" allows for either:
DHCP and Nat
DHCP Only
Off (Bridge Mode)
Is your advice to Configure the TC in Bridge Mode as simple as setting Router Mode to Off (Bridge Mode)? If yes, then what should the rest of this "Network" tab look like? Anything else involved in configuring the TC in Bridge Mode or is it really as simple as setting the Router Mode to "Off (Bridge Mode)"?
How about the other tabs in Airport Utility, can they all stay as is assuming I use the same network name and password for the new Asus wireless router? Or do I need to make any other changes to the TC via Airport Utility?
Finally, in regards to your Plan B suggestion. I agree. But do you have a Plan B for me? I would greatly appreciate any alternative you could provide. Specifically, if you needed a TC's Internet connection to reach a far off corner of your home how would you do it? In the master bedroom I need both a wired Ethernet connection for the Denon a/v receiver and wireless Internet connection for the iPhone and iPod Touch.
Power-Line Adapters - High Cost, Blocks at Least One Wall Outlet and Does Not Solve the Wireless Need
I actually like exactly one power-line adapter, which is the D-Link DHP-540 PowerLine AV 500 4-Port Gigabit Switch. This D-Link power-line adapter plugs into your wall outlet with a normal sized plug (regular standard power cord much like any other electronic device) instead of all of the other recommended power-line adapters that not only use at least one wall outlet but also often block the second outlet. You cannot use a power strip with a power-line adapter which is very impractical for me. And everything about my home is strange and upside down. The wiring here is a disaster and I don't have faith in its ability to carry Internet access from the living room to the master bedroom. And this D-Link power-line adapter costs $90 each and I need at least two to make the connection to the Denon A/V receiver. So, $180 on this solution and I still don't have a dependable drop free wireless connection in the master bedroom. The Denon might get its Ethernet Internet connection from the power-line adapter, but if I want to use an iPhone 4 or iPod Touch to stream AirPlay music to the Denon wirelessly (Pandora/iTunes, etc.) from the master bedroom the wireless connection will not be stable in there and I've already spent $190 on just the two power-line adapters needed.
Extenders / Repeaters / Wirelessly Extending the Wireless Network
I have also read great things about the Amped Wireless High Power Wireless-N 600mW Gigabit Dual Band Range Extender (Repeater) SR20000G and the My Net Wi-Fi Range Extender. The former is very powerful and the latter is easier to install. Both cost about $150 ish so similar to a new Asus router. However, everything I read about Range Extenders points to them not being very effective for a far off corner of your house wherein it's apparently hard to place the range extender in the sweet spot where it both gets a strong enough signal to actually effectively extend the wireless signal and otherwise does not reduce network throughput speeds to unacceptable speeds.
Creating a Roaming Network By Hard Wiring with Ethernet Cable - Wife Would Say, "**** No!"
Even Apple seems to warn against wirelessly extending your network (see: http://support.apple.com/kb/HT4145#) and otherwise strongly recommends a roaming network where Ethernet cable is used to connect two wireless base stations. However, I am in an apartment where stringing together two wireless base stations with Ethernet cable would have an extremely low wife acceptance factor (WAF). I cannot (both contractually and from a skill prospective) hide Ethernet wire in the walls or ceiling. And having visible Ethernet cable running from room-to-room would be unacceptable, especially to the wife.
So what is left? Do you have a Plan B for me? Thanks in advance for your help! -
I had to remove Mavericks and do a reinstall on 10.8.5 but still need help...
I have been trying to undo my Mavericks upgrade in October and after considerable effort I am mostly got back to 10.8.5 OS but still need a bit of help. I just want the previous OS back in place then I'll try Mavericks soon....
1) I never seem to pay attention so is 10.8.5 the last OSX prior? As long as it isn't Mavericks, I want to get it installed.
2) I had to reformat my iMac so I have a residual elements from 10.9 and one issue that I had before was permissions. Every number of files either on other hard drives or sometimes in my same user folder was asking for permission and authentication to simply move a file.. A popular one you'll see at the bottom the person/whatever/ problem known as fetching. Could someone just give me the general reason of this fetching and permissions problem that I ran into? Better yet since I just want to avoid it altogether into the future tell me what's the best way to assure it disappears forever.
3) Another, which is kind of a big ticket item for me is the backup/restore/cover your (!!!) system. I was a good little iMac User and had Time Machine backed up for a period prior to the Mavericks install. I'm a little bit upset that TM isn't 100%....but what is...? I need another backup/restore system in place and that's what I am looking for recommendations on. An item that saved me a bit was that I had OS 10.8.3 on an external hard drive. The problem with that one was it was on a partition, on one of the drives requiring to be reformatted. It worked as a bridge consolidating files and all but was a big headache as a partition on the external. Recovery Disk did it's part but wasn't enough as well. Is there a simple/easy idea...clone, disk images, boot from an external drive… ?
4) iPhoto (9.4.3) currently will not open the libraries which iPhoto (9.5) converted. Is there way to go back? Seems the App Store and Software update don't like something. I'm getting into a loop with App Store, iPhoto and the OS. Either the software needs operating system ... then the App Store says it's incompatible or some other complaint. Right now I have 9.4.3 iPhoto installed for OSX 10.8.5 and was only able to create a new library and the converted ones currently do not open.
Thanks to your help10.8.5 is the lates ML edition. I use TM and also carbon copy cloner as my second backup. If I were you and you have a TM backup prior to Mavericks I would try another restore at bootup. You should erase your drive first in that process using disk utitlites and then use TM to put back you apps and files. The other choice is to do an internet recovery and then use TM to restore your apps and files. That should fix the permissions issue. I did the same thing and all was OK including getting my original iPhoto progam (9.4.3), iphoto11 and photos back.
-
i already verify my app id but when i signed in my apple id it is still need to verify?? i try to verify again but when i click verify now then it said i verified it already but when i signed in it again..... it still need to verify. what should i do???
That usually means that y ohave to add a valid payment to your account. Unless you initially set up the account withoeur a credit card
Creating Apple ID without credit card: Apple Support Communities
You need a valid payment method even for free stuff -
i am setting u a new time capsule. i already have a wifi setup in my office. now i want to use this time capsule just as a wireless backup machine. do i still need to attached a DSL cable, or it can connect to my existing wifi and start working ?
You probably can, but this type of configuration is not recommended or supported by Apple.
Two cautions if you want to try this:
1) The Time Capsule has to be configured to "Join" your existing wireless network in this type of setup...and to do that, you must know the exact type of wireless security that your network is using.
2) Backups are likely going to take twice as long. The wireless signal must travel from your computer to the wireless router and then from the wireless router back to the Time Capsule. Two "hops"......even if the computer is located close to the Time Capsule.
If you want to try this, we can tell you how....but with no guarantees on your results....since this is not officially supported. -
Segment reporting, split by profit center; still need segment splitting?
HI experts,
With reference to the subject of this post, I would like to have better understanding on the followings:
Settings (1) IMG > Financial Accounting (New) > Financial Accounting Global Settings (New) > Ledgers > Ledger > Assign Scenarios and Customer Fields to Ledgers ... I have settings of <Profit Center Update and Cost Center Update>
VERSUS
Settings (2) IMG > Financial Accounting (New) > General Ledger Accounting (New) > Business Transactions > Document Splitting > Define Document Splitting Characteristics for General Ledger Accounting ... I have profit center to be split (updated)
My concern, is I want to have segmental reporting. In the SAP material, it says that segment derived from Profit Center.
My Question: With the above settings (1) and (2), do I still need to have additional settings for segment? For example:
Settings (2), do I need to set segment here?
How about settings (1), any need to have <segment update>?
In settings (2), help file says: "This determines what fields in a ledger are updated when it receives posting from other application components." Not quite sure what this statement mean.
Thanks and regards,
sbmelHello,
The actual need of scenarios to be added in every ledger is the need for these objects to be updated in new tables like FAGLFLEXT. If you do not add scenarios then information of cost center, profit center , segment will not be updated in New GL Tables.
Hence it is mandatory to pass entire information related to Cost Centers, Profit Centers and Segment by adding relevant scenarios to all the ledgers activated.
Secondly, segment is such a field that can not only be derived from profit center but also through a BADI using a logic written using ABAP code.
Regards,
Sam -
Do I still need to run the catupgrd.sql??
Hi
I would like if I install the Oracle in the following procedure, do I still need to run the catupgrd.sql.
1. Install Oracle 10.2.0.1 software only( i.e. without create any database instance)
2. Install Oracle 10.2.0.2 patch
3. Create an Oracle Instance using DBCA
Do I still need to run the catupgrd.sql for the newly created database instance?
DenisDo I still need to run the catupgrd.sql for the newly created database instance?No, you don't. Because database was created on already patched software.
-
I purchased my macbook pro on the 18th of june 2011, do i still need to purchase the lion or is there a way of getting it from mac complimentry ?
OS X Lion - Get up to date
-
Hi all, I'm trying to download a film from iTunes onto my iPad but downloaded the HD version instead of SD and don't have the room to download it. Have removed everything I can to make space but still need another 1.2 GB. Is there any way I can delete it so I can delete the version I wanted, or even better change to the SD version? The film is still queuing in the downloads list. I've tried edit and delete but that doesn't work. I also can't re-download the film from iTunes.
Any suggestions very welcome!Try to connect in recovery mode, explained in this article:
iOS: Unable to update or restore
Before that, back up your device, explained here:
iOS: Back up and restore your iOS device with iCloud or iTunes
How to back up your data and set up as a new device
You can check your warranty status here:
https://selfsolve.apple.com/agreementWarrantyDynamic.do -
I now have an iPad and want to know do I still need to have iTunes on my pc?
Need to..? Probably not, at least not if it is running iOS 5. In principle you can set up the device with a working Wi-Fi connection to the Internet, back it up to iCloud and download future updates independently of iTunes. However you still need iTunes to transfer non-iTunes Store purchased media to the device so you may find iTunes still has its uses.
Depending on what region you are in you can download previously purchased apps, books, music and TV shows as often as you like (provided they are still available in the store) but movies and (strangely) audiobooks are still on a one time only download, so it you have any of these, or plan to, then a connection to iTunes will be the only way to backup those items.
tt2 -
How can I backup the iPad to the non-C drive of the computer that runs the itune? I have already setup the library at a NAS and seems only media file are stored int he library. iPad backup still need to take use my C: drive that is running out of space
Windows - Change iPad default backup location
http://apple-ipad-tablet-help.blogspot.com/2010/07/change-ipad-default-backup-lo cation.html
Windows - Changing IPhone and iPad backup location
http://goodstuff2share.wordpress.com/2011/05/22/changing-iphone-and-ipad-backup- location/
Cheers, Tom -
Windows Phone 8.1 Preview users still need to downgrade their OS in order to get Lumia Cyan
Just an FYI for those of you who jumped on the Windows Phone Developer bandwagon and subscribed to the Windows Phone Developer Preview to get an early look at 8.1. This is not such good news.
As is the case with all Microsoft Beta and Pre Release Software (Windows, Office, Windows Phone, etc.), there is a strong chance that the final cut of the software may not be compatible with the Beta or Pre Release versions of the application you are invited to download and sample. Based on the article below and based on the AT&T customer experiences, this, in fact, is the case with the WP Developer Preview of 8.1.
The Cyan 8.1 release provided to the carriers looks to see if you have DP 8.1 running and cancels the install if you do. Microsoft has not said when a compatible version would be available through the Developer Program or with US carriers.
There are directions on how to restore back to WP 8.0 if that is something you have to do. Or, skip the Verizon update, keep DP 8.1 and wait for Microsoft to release an update. Many are skeptical that Microsoft will do this; many are saying that the next Developer Preview will be WP 9.0. Regardless - the only way you will be able to install the Verizon version of Cyan 8.1 will be on a supported WP device running WP 8.0. There are many more details in the article below and the comments at the end of the article are filled with interesting information as well.
http://www.wpcentral.com/preview-developers-still-need-downgrade-lumia-cyanprimortal: Interesting post on WPCentral this morning about 8.1 GDR 1 for Preview Customers. Looks like those "in the program" may get GDR 1 before Verizon even gets around to releasing 8.1.
I had good results with all of the 8.1 Preview Releases I downloaded. While I did experience morning phone freeze and other slight annoying glitches, I did find that 100% of them were a result of using an APP called Clock Hub. Killed the APP and my ICON ran like a champ.
http://www.wpcentral.com/official-update-1-windows-phone-81-next-week-preview -
I have to reformat my hard drive and reinstall all of my programs. What do I do about Creative Cloud? I also still need access to CS6 (I have a Marksware converter for InDesign to Quark).
This is a MacBook Pro 15" (Model number A1286) running Mavericks. Hard drive is fine but system software has been corrupted. I cannot simply restore from Time Machine as it will copy the corrupt system.
Will I have to find all of my serial numbers before I can launch any of the programs?
ThanksFor the Cloud, you log in to your paid Cloud account and download & install the same way you did the first time
Cloud Getting Started https://helpx.adobe.com/creative-cloud/topics/getting-started.html
If you have the perpetual license version of CS6 you install from your original media and use your serial number
If you have the version of CS6 that is installed via the cloud use this link
http://helpx.adobe.com/creative-cloud/kb/download-previous-versions-creative-applications. html
-or http://www.adobe.com/downloads/other-downloads.html -
I downloaded a Trial version of Adobe Acrobat XI. Now the trial has runout and I've signed up for a subscription. However, my software still needs a serial number. How can I get a serial number for the installed software?
There is no serial number and you don't need one. What you need for a subscription is to SIGN IN within Acrobat, so it knows the subscriptions you own.
-
my iphoto wont open since i updated my mac, please help? it says i need to install an iphoto library upgrader which I have installed but still cant see my photos.
What version of iPhoto are you using? 9.6 is the current version.
Do a backup.
Quit the application.
Go to Finder and select your user/home folder. With that Finder window as the front window, either select Finder/View/Show View options or go command - J. When the View options opens, check ’Show Library Folder’. That should make your user library folder visible in your user/home folder. Select Library. Then go to Preferences/com.apple.iPhoto.plist. Move the .plist to your desktop.
Restart, open the application and test. If it works okay, delete the plist from the desktop.
If the application is the same, return the .plist to where you got it from, overwriting the newer one.
Thanks to leonie for some information contained in this.
Maybe you are looking for
-
256 GB SSD FDE in T400s... I can not see the harddrive in my bios
hi everyone I want to reset the encryption key of my SSD with Full disk encription. But unfortunately i cannot see this option in my bios ( i update to the newest one already) I found the answer http://www-307.ibm.com/pc/support/site.wss/document.do?
-
What does this command do? "$HOME/path/to/the/Folder/"
Hi, What does the following command do? $HOME/path/to/the/Folder/TEMP If the TEMP file does not exist, will it create a new TEMP folder? How can I check whether a "new TEMP folder" is created? Thanks in advance. Ed
-
Macbook Pro Retina Display 15in (Late 2013) low frame rate while gaming on Bootcamp
I used my old macbook pro 15in(early 2011) to play battlefield 4 on bootcamp and got an 35+FPS on low setting. However, I got an extremely low FPS, about 5fps while using the new retina display macbook.
-
ICal won't work with internal address to exchange server; mysteriously reverts to internal address
iCal will not sync to our exchange server via our internal address. It WILL sync if I copy the external address into the internal field, but after a few days, the internal address mysteriously reappears and the sync is broken. Please help! OS 10.7.5
-
How do I create Webservices on Oracle 9iDB Release 2 or 9iAS Release 2? (without JAVA?) I'm pretty new to Oracle.... What do I need to create Webservices? How is it possible to create webservices with 9iDB/AS Release 2? (Is it possible to use PL/SQL