Is a 2011 iMac power cable compatible with a 2013 iMac?

Just wondered if the extra plastic circle on the standard C13 cable matches up with a later iMac model.

I'm not so sure about that. I have a 2011 at home and a 2013 at work, and my recollection is that the 2013, having a much more severe dish in the back to make the thin front edges, has a pronounced slope to the power cord disk. Looking at my My 2011 right now, the disc has no slope relative to the cord. It might work, but the disc wouldn't fit right. I'll have to shut down to pull the cord and examine it!

Similar Messages

  • Griffin's Pro Speaker Breakout Cable compatible with the iMac G5?? HELP!

    I would love any suggestions anyone has as to making Griffin's Pro Speaker Breakout Cable compatible with the iMac G5.
    I just made the very foolish mistake of purchasing Griffin's Pro Speaker Breakout Cable for my iMac G5, which I am sure others, more up to speed on their apple products, realize are not compatible. The Pro Speaker Breakout Cable, as its name would suggest, connects to the Apple Pro Speakers Minijack available in G4s and G3s.
    I need someway to connect this Apple Pro Mini plug (2.5mm plug) to my audio-out 3.5mm output jack on my iMac. I have found this connector http://www.mpja.com/productview.asp?product=11298+AD but I am not sure if the 2.5mm Apple jack is the same as other 2.5mm jacks. Does anyone know if the two are compatible???
    I guess the other option is the iFire - or, conversely, to just forget the whole thing and get some new speakers.
    Any suggestions on the best/ most cost effective option would be greatly appreciated!!!
    Thanks in advance,
    Chris

    Forgive me for not being specific enough. I do not want to connect apple pro speakers. I want to connect my household speakers via the Pro Speaker Breakout Cable http://www.griffintechnology.com/archive/audio/prospeaker.html to my iMac. However, I did not realize that the breakout cable connected to the obsolete Apple Pro Speaker Minijack 2.5mm.
    Basically, I am just looking for the most cost effective method to get suitable sound from my computer. The threee options I am considering are:
    a) 2.5mm jack to 3.5mm plug converter allowing my breakout cable to fit into my audio input (which I am not sure will work - as I am not sure if the Apple minijack is a standard 2.5mm)
    b) get the iFire, plug my breakout cable into the iFire and then to my computer.
    c) get a different sound system entirely.
    I am really looking for any advice as to which would be best.

  • Is Microsoft Office for Mac 2011 [Word, Excel, Powerpoint] compatible with Yosemite?

    Is Microsoft Office for Mac 2011 [Word, Excel, Powerpoint] compatible with Yosemite?

    I'm using Excel, Word and Outlook for Mac 2011 in Yosemite without any issues.  I can't speak for Powerpoint, as I've never opened it.  I'm not a power user in Office, so I doubt I've really exercised it.  But so far, Word editing and some simple Excel spreadsheets I use for inventory tracking have worked with no problem.

  • Is the USB Power Adapter compatible with iPod touch 3rd Generation?

    Is the USB Power Adapter compatible with iPod touch 3rd generation?
    (http://store.apple.com/us/product/MB352LL/B?fnode=MTY1NDA4NA&mco=MTM3NDk1MjI)
    The specs of the Adapter ("This accessory is compatible with the following:" in the "Overview" section) don't mention iPod touch 3rd generation. They do mention 1st and 2nd Generation
    Thanks!

    Thank you, Lyssa.
    You must be right based on that article (http://support.apple.com/kb/HT1353). The latest model of iPod touch is referred to as "iPod touch (Late 2009)" -- and NOT "iPod touch 3rd generation", as I erroneously assumed.
    That completely answers my question about the USB power adapter.

  • Is RoboHelp 9 compatible with Office 2013?

    Is RoboHelp 9 compatible with Office 2013?

    Not officially. If you want to import or link, then it will not work. However, if you only need to create printed documentation, then right click the print layout and select Properties. That way it will work. Obviously if you hit problems, Adobe will not support that but chances are you will be OK.
    See www.grainge.org for RoboHelp and Authoring tips
    @petergrainge

  • Is Captivate 6 compatible with Office 2013?

    Is Captivate 6 compatible with Office 2013?

    Hello There,
    I am sorry for that but Captivate is not compatible with Office 2013.
    Please check the link for the compatibility between Captivate and Microsoft office: http://helpx.adobe.com/captivate/using/microsoft-powerpoint.html
    Hope this helps !
    Thanks and Regards
    Himanshu Satija

  • Sata III hard drive cable compatible with older generation of macbook pro

    Would my macbook ( 17 in mid 2009 ) be compatible with a new hard drive cable ( sata III ) ? I upgraded my hard drive to Samsung Pro 840 and wanted to upgrade my sata II cable to a sata III for faster read and write. Is this possible?

    Dave The Newbie,
    replacing the cable will not increase the interface speed, just as putting racing slicks on a minivan won’t make it a dragster. I have the same model SSD in my Mid 2010 MacBook Pro, and my MacBook Pro’s SATA interface is limited to SATA II, just like yours. Unless you’re planning on mainly running disk-bound apps, it’s not something that you’ll need to worry about — just enjoy the SSD as is.

  • Is a DKE-2 USB cable compatible with HP Pavillion ...

    I tried to connect my Nokia 5300 using the DKE-2 USB cable but it just won't connect to my PC. I've tried checking it on My Computer but it doesn't show up on devices with removable storage. I just want to know if it is compatible with HP Pavillion.

    @lilac:
    when you connect the phone to the pc, keep your eye on the phone.
    On my 5300 the message is: "USB cable conncected, Select mode". Press Ok to acknowledge the message, and you are moved to a menu where you can choose
    - "Nokia mode" (= PC Suite compatible)
    - "Printing and media" (dunno myself what this is for... RTFM)
    - "Data Storage" (= Mass storage device, like an external hard disk)
    You should go with "Nokia mode" if you want PC Suite to recognize the phone.
    You should go with "Data Storage" if you just want to see the phone's memory card as a disk, and move files to/from as if it were a disk.
    .Message Edited by fred_be9300 on 01-May-200712:25 PM
    My Nokia history: 5310 (Sep 2008), 5300 (Jan 2007), 6610 (June 2003), 3310 (2001)

  • Is the cRIO 9067 compatible with LabVIEW 2013?

    I just purchased 2 cRIO 9067s and I'm trying to configure one of them to use.  I got the IP address set and booted it into safe mode.  The status light blinks twice, then pauses.  The documention says this means I need to download software.  NI MAX only suggests using versions 14.?, which I'm assuming is LabVIEW 2014, but that option is grayed out.  And if I  try to do a custom install, everything in the list produces a concfict and wont download.  Is the 9067 only compatible with LV 2014?  Or am I missing a step?  the version of LV that I am using is 2013.  I'm installing 2014 to test this theory, but I'm no thopeful.  Thanks for the help people.  
    Solved!
    Go to Solution.

    The cRIO-9067 does require LabVIEW and NI-RIO 2014. You can use http://download.ni.com/pub/gdc/tut/crio_software_versions.htm to look up the minimum software support for cRIO products.
    I don't see how I can link directly to the result, but if you select "CompactRIO Chassis and Controllers" from the drop down and then "cRIO-9067" you should see this table.
    NI cRIO-9067
    Minimum Software Support
    Software
    CompactRIO (FPGA Interface)
    CompactRIO (Scan Interface)
    ✔ Supported
    ✔ Supported
    LabVIEW
    2014
    2014
    LabVIEW FPGA Module
    2014
    LabVIEW Real-Time Module
    2014
    2014
    Device Driver Software
    NI-RIO Device Drivers August 2014
    NI-RIO Device Drivers August 2014
    NI-DAQmx
    Other Minimum Software

  • Are 2009/2011 iMac power supply compatible with mid2010 iMac?

    I have a mid-2010 that doesn't turn on. None of the LEDs turn on and I've been troubleshooting for a couple weeks with no luck. I want to buy a power supply for the iMac but I'm not sure if others are compatible. I can't find one specifically for the 2010 one.
    Information:
    Mid-2010 21.5" iMac
    EMC 2389
    About 2.5-3 years old
    It doesn't turn on
    None of the diagnostic LEDs are lit
    Makes a small zzz noise every couple seconds when plugged in
    Suspected power supply failure

    Switching won't harm your machine.

  • Is any HDMI cable compatible with Apple tv?

    Can I use another brand of HDMI-HDMI cable with apple tv, other than the one they sell on their website?

    Yes.  Any generic will do.

  • Power Cable issue with NOMAD

    I've had my nomad zen for over 2 years and it's worked great. However yesterday i went to plug it in to charge and no power was going into it. I felt the mid cable box (which i think converts AC to DC) and it was warm. So this a.m. i tried charging again and nothing... is it safe to assume that the charger is dead? do they sell creative ones at best buy, do i need toorder it from this website, or can i find a uni'versal one at radio shack and make sure it's set properly? it hasn't been 24 hours and i'm already starting to miss this **bleep** thing!
    pezman

    It's possible it's dead. A quick and easy test is to get a multimeter and test whether there's any voltage output at the tip.
    If it's dead Creative sell replacements at their online store. You can also buy generic replacements, but they must have a suitable tip size of course as well as produce 5V @ .5A minimum rated current.

  • Vision W power adapter compatible with Vision

    Hi all,?Does anyone know if the power adapter that comes with the Zen Vision W work with the Zen Vision M? I checked the voltage input of the adapter and it's the same as the Vision M (DC IN 5V) but it's happened to me before where I used a different adapter for another MP3 player I had, the voltage requirements were the same and it ended up frying the battery... any insight you have is appreciated?Thanks!

    Should be fine, your Watch will control how much power it takes.

  • Is SharePoint 2013 Connect to Outlook compatible with Outlook 2013 64-bit?

    The Connect to Outlook feature is greyed out on the tool bar and when I click on it I get the message "This control is currently disabled".  I have spent a good deal of time researching and troubleshooting (see below) with no success. Below
    is what I have validated.
    Tested in IE, Chrome and Firefox with same results
    Validated that IE10 is 32-bit
    Tested with both Compatibility Mode on and off
    IE “Enable Protected Mode”
    is not enabled
    (Tools à Internet Options
    à Security)
    Validated that Minimal Download Strategy feature is
    not activated (SharePoint Manage Site Features) 
    Validated that Offlline Synchronization for External Lists feature is
    activated (SharePoint Manage Site Features)
    Validated my client machine time zone matches the regional settings of my site collection regional settings
    I am a SCA with Full Control permissions of the site collection
    We are cloud-hosted
    Office 2013 64-bit is installed on my machine
    My machine is a Dell PC
    I appreciate your expertise to help me resolve this issue.

    Hi,
    Per my test,  I am able to use the Connect to Outlook feature with Office 64-bit.
    For your issue that Connect to Outlook feature is greyed out:
    Activate Offline Synchronization for External Lists feature.
    Go to the Calendar.
    On the Calendar tab click List Settings.
    Copy the Web address, e.g. https://www.contoso.com/sales/Lists/Calendar/calendar.aspx.
    Paste the URL in your browser and press Enter.
    Go to the Calendar tab and click List Settings.
    You will notice that the Connect to Outlook link is now enabled.
    Please refer to the following blogs about the issue:
    http://blog.zubairalexander.com/archives/4560
    http://www.missionsharepoint.com/Lists/Posts/Post.aspx?ID=55
    Best Regards,
    Lisa Chen
    TechNet Community Support
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

  • Is Photoshop Elements 13 compatible with late 2013 Mac Pro?

    Does anyone here run PSE 13 smoothly on the late 2013 Mac Pro? My copy runs very sluggish on my Mac Pro even though it has a 3.7GHz quad-core Xeon processor with 16GB of RAM. For example, if I drag a slider, it does not move smoothly. The slider will jump after a second or two. Then a few seconds later, its effects are shown. If I move the mouse to a button, it will take awhile before it displays its name.
    I use a 2nd copy of PSE 13 on my MacBook Pro with no problem at all.
    I contacted Adobe support and they asked me to re-launch the PSE and reset the preference. It did not work. I then un-installed the PSE and re-installed it. The same problem still exists. What is worse is now my Mac Pro does not enter sleep mode.
    Anyone here with good experience with PSE 13 on the latest Mac Pro? All other programs on my Mac Pro run well.

    Thanks
    I can't understand why I can't install it on my MacBook Air.  I continue to get Exit Code: 7 with DW063 being the dominant errors.  the error statement says it is unable to get permissions of /Applications/Adobe Photoshop Elements 13/Support files/ etc.
    There is no Adobe Photoshop Elements folder on my computer. 
    I added a 2nd account with Admin privileges and got the same results.
    I downloaded the install file from both Adobe and Amazon.

Maybe you are looking for

  • Anyone know how to make an "Index Transparent" gif

    I have successfully made transparent PNGs and GIFusing an Alpha transparency but now I need to make images which would be the same as ueing fireworks / Photoshop to make a colour transparent. i.e. indexed transparency. Does anyone know how to do this

  • Saving a PDF form

    How do I save a PDF form that I've filled out online, with the information in the form fields?  I have Adobe Acrobat 7.0 Standard and recently updated to Adobe Reader 9.  With the previous version of Adobe Reader that I had, I could save the complete

  • Blocked Stock for Returns

    Hi I would like to know how can make the receipt of Goods against the returns ,directly to the Blocked Stock. right now it is going to return stock. what are the settings required for this. Regards AK

  • Using a library with faceted navigation

    Hello, I have been tasked to implement cross site publishing using a document library on the authoring site.  The publishing site must be able to use faceted navigation derived from columns from the authoring site.  Eventually, the publishing site wi

  • 2013 15" MacBook Pro, Win7 64 in Bootcamp 5. Touchpad is too sensitive when typing.

    Just got a new Mac Book Pro 15" with Retina Display.  Installed Boot Camp 5, Windows 7 64 bit.  Everything has worked fine, but noticed while typing that the cursor "jumps around" randomlIy.  In researching this issue, I saw where in Version 3 of Boo