Is a 24 pin atx cable needed for the k8n neo 4 platinum?

i have a Thermaltake Silent Purepower 480 Watt PSU. i am thinking about upgrading from an msi k7n2 delta to the k8n neo 4 platinum motherboard.
if i do this, do i need this adaptor cable?

Quote from: Deathstalker on 08-June-05, 22:18:54
ryansebiz,
That Power Supply has the 24 Pin Cable as part of its cables. You do not need any adapters.
Take Care,
Richard
thanks richard, you saved me $11 on a cable adaptor

Similar Messages

It's my PSU enough for the K8N Neo 4 Plat. Sli

I have an Nspire PSU 450W
+12 25A
+5 40A
+3.3 28A
It is enough for...
K8N Neo 4 Platinum Sli
AMD Athlon 64 3500+
MSI NX6600GT-TD128E
PCI Video Capture card
Zalman Ultra Quiet CPU Cooler
HD SeaGate Barracuda 120GB
CD-ROM
DVD/CD-RW
??????????????????????????

Dude, if you're even thinking about SLI on your new K8N Neo 4 Platinum SLI mobo, you should forget about that Aspire PSU (unless you want to fry everything in your Rig) and bite the bullet and get a PC Power and Cooling Turbo-Cool® 510 SLI (510W) http://www.frozencpu.com/psu-151.html.

Ram ? for a K8N Neo 2 Platinum

hello all, got a question about PQI memory for a K8N Neo2 Platinum with a Athlon64 3500+. as of right now i have corsair pc3200llpt running and everything is great. what my question is is all the hype about the PQI timings and what not worth an upgrade? if you need more info ill be glad to post specs. any input would be most excepted

Quote
Originally posted by Slayer88
hello all, got a question about PQI memory for a K8N Neo2 Platinum with a Athlon64 3500+. as of right now i have corsair pc3200llpt running and everything is great. what my question is is all the hype about the PQI timings and what not worth an upgrade? if you need more info ill be glad to post specs. any input would be most excepted
How fast can you run your Corsair? I think that's the key to answering your question.
Yes the PQI is fast. (Its no faster than any other TCCD ram, however: Corsair XL, OCZ Rev2, G.Skill etc. - all the TCCD's offer similar performance.)
Personally I don't think the higher FSB you would get from the PQI would justify the upgrade on its own. Running your CPU at say 8x275 compared to stock 11x200 will benchmark better, sure. But I doubt you'd notice much speed improvements in everyday use.
Chip.

System setup advice for MSI K8N Neo 2 Platinum.

Here is the PC I'm putting together:
Enermax EG465P-VE Noisetaker PSU with 29A on combined 12v rail
5v=30A 3.3v=30A 12V1=18A and 12V2=18A (comb 12v=29A)
MSI K8N Neo 2 Plat
AMD 3000+ winchester Retail box (carefully replacing AMD shin etsu with Artic Silver 5)
WD 80GB 800JB 7200 rpm EIDE HD
OCZ 2 x 256 PC3200 Premier Dual Chan Memory (2.5-3-3-7) (List on MSI website as ok)
Matrox G400 max
adaptec 2930u scsi adapter
Pioneer 303S 6x scsi DVD rom
Umax 1200S scsi scanner
Plextor 24/10/40 EIDE CDRW
External USR robotics serial modem
Microsoft regular keyboard PS2
Logitech regular wheel mouse PS2
regular old 1.44 MB floppy drive
Installing Win XP Pro upgrade (have my 98SE CD)
In the future I will possibly ditch my scsi DVD rom and replace with NEC dual layer burner and replace Plextor CDRW with 52/32/52 CDRW/DVD ROM. For now I'm going with what I have.
No plans to overclock now if ever. Perhaps a small amount later. Maybe 2.0 ghz? Maybe no overclocking at all.
Not a gaming rig really, although I'll try the odd game at low resolution.
So is there anything I should do ahead of time? I am carefully installing the board in the case and everything that goes with it. What sort of configuration setups should I do? Do I flash to a more updated BIOS first? Do I leave onboard things un-activated first? How do I setup my memory? For instance, I may look for the best BIOS to start with and have it ready to use if I have problems. I may also use the nVidia drivers for onboard audio instead of the realtek drivers.
Not looking for all the answers, just feel free to point out any of the obvious which may save me time
thanx in advance for any help

There is a compatibility issue betwen the Matrox G series cards and the MSI Neo Platinum motherboards, which AFAIK, hasn't been solved yet. The problem seems to be a result of changes made in the newer versions of the MSI bios, however you may be stuck if you need a newer bios for the Winchester cpu. You can find out more if you do a search on Matrox in this forum.
Robert

Better HSF for the K8N Neo Plat?

I have been looking at a few HSF's for about a month now, and I'm still not sure if I will buy it now or not but I will sooner or later, but these are the two that I have seen suggested the most, and seem to be the best (that don't sound like a vacuum):
Zalman 7000-CU= $38.50
or
Thermalright XP-90= $39.99
and keep in mind that the XP-90 doesn't come with a fan so that will be an extra $5.
So which one should I get?
Specs in sig
EDIT: Also if you don't like either one of these, could you suggest an alternative.
Thanks

I have the copper/aluminum Zalman CNPS7000A-ALCU Pure Copper/Pure Aluminum CPU Cooler which ihas lowered my temp greatly. It's only $34.99 with free 2nd day shipping from ZipZoomFly.com. They have great prices and you can't beat the shipping.
http://www.zipzoomfly.com/jsp/ProductDetail.jsp?ProductCode=371002
Just note that you will have to remove the backplate from the Neo motherboard but if you use a plastic spatula and hair dryer it comes off very easily. Just keep firm but not hard pressure lift on the plate while using hair dryer. I was a little heavy handed and it made a sickening sound when it came off. Nothing bad to board as it was only the sticky stuff letting go.
Again, great HSF especially if you use Artic Silver5 with it. I connected mine to existing motherboard connection and used the included speed controller to slow down my 120mm input fan a little.
Rick
MSI K8N Neo Platinum (BIOS 1.5B6) 231 @ 10x HTF 3x
Athlon 64 3200+ w/Zalman CNPS7000A-ALCU @ 1.57V
1GB Corsair XMS TWINX PC3200C2PT Memory (Slot 1 & 3)
(3-3-3-11, 2T) @ 2.8V
2x160 RAID 0
1x160 Maxtor IDE 133 (Secondary Slave)
NEC 3500a DVD Dual Layer 16x (Primary Master)
NEC 2510a DVD 8x (Primary Slave)
ATI AIW Radeon 9600XT
HSF on Nvidia/NB (29c)
Antec TruePower 550 = +3.3V@32A, +5V@40A, +12V@24A

[AMD] Whats the best BIOS for overclocking on the K8N Neo-2 Platinum

any one know which one is best.
thanks

I have no idea what biosversion that is the best in general for OC the K8N Neo2 P.
I use 1.5 and it´s the only version I´ve used.
I believe not many people have tested OC potential for all 6 versions 1.0 - 1.5.
( even more if you include the beta´s).
I would say OC potential depends more of what hardware you are going to use.
Good RAM and a good CPU stepping are in most cases more important then biosversions.

Which bios savior for the k8n neo chip???

I'm not sure which chip is in the k8n neo platinum so I hope someone knows....here's the link to the bios saviors http://www.frozencpu.com/cgi-bin/frozencpu/scan/se=Electronics/se=IOSS%20BIOS%20Savior/mp=menu_search.html

i have an ioss rd1-pmc4 bios saviour so i popt the bios chip out of my board and the chips look identical. i did not try it in though as i only got my cpu and motherboard the other day.will try soon

Cable needed for connection?

Quick question - what cable do I need for the apple tv for a Visio HD TV?

captfred wrote:
HDMI works as well as "composite" video.
appletv does not support composite at all.
i'm sure you meant component.

Help needed for THE decision

Hi everyone ☺
I’m finally planning to start recording what I play, and after some hours of wandering on the web I found some interesting possibilities. Now what I need is to decide which one is more suitable for my needs, and here comes the moment for apple discussions
Basically, I will record my own music one track/instrument at a time (I’m still not able to play more than one…and I dont’ want to spend 2.000$ to buy a 24-ins device just to record drum tracks), I’d like to have a software with built-in effects for guitar/bass/voice, integrated soundtrack possibilities (to play with video recordings), mixing options for both stereo and surround mixing, and I don’t want any card to be placed into my mac. Well, and obviously the sound quality must be pro-like…as anyone probably wants.
So, here’s what I came up with:
a) getting logic pro studio 8 and apogee duet
b) getting pro tools m-powered and mbox 2
c) getting one of the two softwares and a Monster iStudioLink Instrument cable and plug instruments directly into the mac
Now, the questions are:
if I can plug an instrument directly into my mac and control all parameters via one of the two softwares, what do tools like duet and mbox2 serve for?
In the case this tools are useful [ ☺ ], why ☺ … and which is the couple software/hardware that can best suit my needs?
I assume that every software has a proprietary file extension in which audio tracks are saved, so that it should be impossible to record an audio track with one software and edit it with another that has different functions/plugins (ex. from logic to pro tools, from pro tools to cakewalk sonar which I have on a pc etc.). Am I right, or is there any “standard”, non compressed high quality file type in which track can be saved and exported to be edited with different softwares?
I know that from this post it may easily seem that I’m a hopeless digital idiot, but I swear the situation is not really that bad so no need for the kind of explanations with drawings like the ones you find in the “for dummies” guides lol so every experts’ advice will be greatly appreciated
Neptune

Thank you Bee Jay and Pancenter for the lighting-fast and useful answers
now I am aware that an interface IS NEEDED lol (that means they are not produced without a reasons, are they?). I know Pro Tools is the industry standard but I don't like anyone/anything to tie me to their choices/interests (so that's why I was asking about Pro Tools, knowing that there's some sort of "hardware threat"). What I look for is just quality and if I understood what you both mean, as far as this aspect is concerned, Logic and Pro Tools are substantially comparable...isn't it? On the interfaces side, I already checked the Saffire ones (they seem quite good, and cross-platform use is definitely a plus), I will check the others mentioned and will let you know In fact, I didn't consider the "platform problem" but, as I wrote, I also own a PC with an Audigy 2 soundcard (midi/analog/optical/digital inputs/outputs and firewire port...not Madonna's private studio, but not as sad as Mac's little hole) and Sonar 6 Producer Edition, so that has been a really good point to ponder. And now, in the middle of this software/hardware battle...any personal suggestions based on tests/personal experience?

Software needed for the USB device, "USB Interface Controller TEST2.0"

My mother recently acquired a digital camera. She acquired it from a second-hand store, which did not include an interface cable or software. The manual (and the USB port on the camera) indicates that a male-male USB cable is necessary for photos to be copied to the hard drive.
I was not successful in locating such a cable at any local electronics store (I assume such a cable is now out-of-date). I purchased one from a seller on eBay. The brand is "e circuit electronics".
Upon powering up the camera with the cable connected to it and the computer, the following message appeared:
"Software needed for the USB device "USB Interface Controller TEST2.0" is not available. Would you like to look for the software on the Internet?"
I clicked "Yes". After an approximate two-minute wait, another message appeared stating:
"Software Update is not able to connect to the Internet. Please check your configuration and try again."
I deleted, "Software Update Preferences" in the Preferences folder inside the System Folder, without solving the problem. How do I solve the issue of allowing Software Update to connect to the Internet?

Thank you for your continued assistance, BDAqua. Unfortunately, the driver you linked to does not seem to be compatible with the camera. It is a driver for the V20 model, whereas my model would correspond to be a V2755, as referenced from a list of other Vivicam models when during a search at the Open Drivers web site.
From the system requirement about the card reader you gave me, it will not work, as this system is running 9.1. I am hesistant to upgrade this computer to 9.2, as I have experienced system unstability with that version, with even the 9.2.2 update applied.
In the mean time, I have e-mailed Vivitar regarding this issue, but have as of yet received a reply.
I am not certain as to other specifics to give you, in order to solve the Software Update problem. Please elaborate.
Yes eww, the computer in question is able to fully connect to the Internet for all that I need. I am fully aware of the difference between a computer connecting to the Internet, and a computer connecting to a digital camera. I have 15 years of Macintosh experience.

Audio cable help for the new AppleTV.

Audio cable help for the new AppleTV.
Currently I have an original AppleTV with audio RCA plugs to mini plug into my BOSE speakers.
The 2nd Gen AppleTv has a Toslink input. I've looked at cables of Toslink to optical mini. Will this cable work? The optical mini part I'm not sure of what it is.
Thanks so much. The monitor I use doesn't have speakers.
This is the cable I see at Amazon
http://www.amazon.com/gp/product/B0002JFN1K/ref=ordcartshr?ie=UTF8&m=ATVPDKIKX0DER
Message was edited by: musicmaker

If I understand your question correctly, you want to connect your Apple TV2 to your Bose system using a mini plug.
You will need an optical to digital coax RCA converter (find it on Ebay about $15), then you can connect your mini cable. Here is a link to one I recently bought on Ebay: http://fwd4.me/nrQ

Driver files needed for the following Sony dvd/cd rom drive: "dvd-rom ddu 1615". windows xp

Driver files needed for the following Sony dvd/cd rom drive: "dvd-rom ddu 1615".
The dvd-rom drive will not read any type of dvd or cd.
desktop computer: Dell Dimension E310 , windows xp, service pack 3.
This Sony dvd rom was installed (by someone else) and replaced the dvd rom that initially came with the Dell E310.
Where can I find driver files for this dvd rom?
Thanks,
Denise

Hello Denise,
Welcome to the Sony Community.
All of the Sony internal optical drives are plug & play with Windows so no drivers are required for detection in your PC. If you are having issues getting your drive detected then please try the following:
• Ensure the Sony drive is set as a secondary master by itself. If you have another disc burner or a zip drive on the same IDE cable, please separate them.
• Ensure you have the latest Service pack for your Windows operating system and any other updates for your system installed.
service, storage support email
• Please remove your secondary IDE channel from the Device Manager.
If the issue is still not resolved, service may be required. You may contact the Sony Storage support team by e-mail at: [email protected] for further information.
Thank you for your post.

Hi have just purchased iphone 4s . my itunes on my mac is currently 10.4 . 10.5 is needed for the new iphone but when i download it and click on install the itunes about still says 10.4 . have tried to update through itunes but it says there is no softwar

hi have just purchased iphone 4s . my itunes on my mac is currently 10.4 . 10.5 is needed for the new iphone but when i download it and click on install the itunes about still says 10.4 . have tried to update through itunes but it says there is no software available for me . please help . mr frustrated

If your computer is running an OS X prior to Snow Leopard 10.6,
the answer (if it is an Intel-based Mac; not old PowerPC model)
would be to buy the retail Snow Leopard 10.6 DVD from Apple
for about $20, and install it. Then update that to 10.6.8 by using
the installed Snow Leopard online to get Combo Update v1.1 for
Snow Leopard 10.6.8. After that is installed & updated, run the
system's Software Update again, to see what else is available to
that system.
Later systems can then be looked into at Mac App Store, once
the computer is running Snow Leopard 10.6.8.
And if your computer is a Power PC (G4/G5, etc) and has no
Core2Duo kind of CPU -- See "About this Mac" in apple menu
to disclose the general info about your Mac. Also you can see
even more by clicking on "More Info" when looking in there...
If it isn't an Intel-based Mac, it can't run a system past 10.5.8.
Hopefully this helps.
Good luck & happy computing!

LabView "Guru" needed for the summer (4 month project) Kalamazoo, MI

LabView "Guru" needed for the summer (4 month project)
I am looking to hire a LabView "Guru" for a summer project in Kalamazoo, MI that will last 4 months. Specifically, the ideal person will have the following:
LabView expert with a minimum of 7-15 years of experience working with LabView (currently using version 6.1).
80% of the job will be dissecting and interpreting mature LabView code and then re-engineering it to be used for testing.
Printed Circuit Board experience a plus.
4 year degree (BSEE preferred, but expertise in LabView takes priority over degree)
The pay will be $60/hr and you can plan on overtime of at least 10 hrs each week that will be paid at $90/hr.
Please call 616-855-4600 if you need more information and email a "word" copy of your resume to [email protected]

Sounds like Parker-Abex (LabVIEW 6.1 part)
Putnam
Certified LabVIEW Developer
Senior Test Engineer
Currently using LV 6.1-LabVIEW 2012, RT8.5
LabVIEW Champion

I just updated to 10.8 Mountain Lion. Now I must enter my admin password each time I attempt to access my main hard drive. How do I reverse the need for the password. It's a real PAIN!

I just updated to 10.8 Mountain Lion from 10.7.5. Now I must enter my admin password each time I attempt to access my main hard drive. How do I reverse the need for the password? It's a real PAIN!

I'd think you have a Keychain problem (Keychain storing passwords and the likes).
When you are being asked, are you offered the checkbox, "Remember this password in my Keychain"? If so, check and see if it stops asking.

Is a 24 pin atx cable needed for the k8n neo 4 platinum?

Similar Messages

Maybe you are looking for