Is an Apple Cinema Display (ca 2005) Compatible with Mac Mini?

I have a 2005 Power Mac Dual G5/2.3 I took off-line last year. It used an Apple Cinema Display 20" that has it's own power supply "brick" and a cord with the monitor connection, a USB connection, and a FireWire connection. Is this display compatible with the latest Mac Mini? Thank you for any advice you may have.

That's correct, the link perfectly describes the Apple 20" Cinema Display I have. With the new Mac Minis requiring an HDMI cable to link to a display, the HDMI to DVI (female) adapter looks like the one I need. I found this on Amazon: http://www.amazon.com/Gino-Black-Female-Converter-Adapter/dp/B006Z8N60C/ref=sr_1 _18?s=electronics&ie=UTF8&qid=1371158207&sr=1-18&keywords=hdmi+to+dvi+adapter+ca ble
This adapter is an all-in-one plug with no cable linking the HDMI to the DVI ends. It looks like it might be too wide to plug in anything immediately adjacent to the HDMI socket on the Mac Mini due to the width of the adapter when the adapter is plugged in. However, I could get around this by purchasing an extension cable with HDMI male on one end and the HDMI female on the other if I had to.
However, one of the comments said that the DVI is video-only and that another cable is required for audio. Can I assume that plugging in either or both of the other connections (a USB and a FireWire) coming out of the 20" display will take care of audio?
That leads to another answer, but I'm confident that I'm almost there thanks to your help. Close enough to mark this as "solved". Thank you! Let me know if you have any further thoughts with regard to the audio though.

Similar Messages

HT5299 i have an apple cinema display circa 2005. what thunderbolt adapter do i need in order to be able to plug it into a current mac mini?

I have an apple cinema display circa 2005. What Thunderbolt adapter will I need in order for it to work with a current model Mac Mini?

see > I have an Apple Cinema Display ADC. What adapters do I need to hookup my ADC connected monitor to my Mac Mini.
or > Using Older Apple ADC Displays with Mac Pro - The Mac Observer
and > Thunderbolt and ADC: Apple Support Communities

Which USB 64GB flash drives are compatible with Mac Mini?

I need to use a USB 64GB flash drive, formatted for both PC and Apple, with my Mac Mini. The largest USB flash that Apple sells is 32GB. Which USB 64GB flash drives are compatible with Mac Mini. If most are, are there any that I should avoid? Thanks.

I'm assuming that when I connect the USB to the Mac it gets formatted for Mac. Then I follow your directions and it gets formatted for Windows, in addition to Mac. I'd choose ExFAT since it is a 64GB USB.
No no. A brand new drive will be formatted as "something", most likely something for Windows, and that could be FAT (which a Mac can also read and write to) or NTFS (which a Mac can read but not write to).
So, you'll need to make sure it's formatted as ExFAT, instead of what it is. A medium can be in always only one format.
About the expense: Fry's is advertising a 64GB Patriot USB Flash Drive for $22.99. Is that considered expensive for a USB flash drive?
That'd be dirt-cheap, I'd say. Expect it to be very slow.
I've read answers that are somewhat related to my question, and some warn that USB's are slow. Maybe I should consider another option?
USB is not that slow (though there are faster buses). And USB flash drives come in different speeds, where especially the "write" speed can vary hugely.
The advantage of USB is that it's widely spread, and lots of media is on the market, making it very affordable. The only other affordable alternative is an external HDD, I'd say, where you get much bigger drives for less money than a small 64GB USB flash drive...
My main objective is that, in switching from Windows to Mac, I want to be able to access Windows files that I've backed up to a Seagate Free Agent. I bought a LaCie with the Mac Mini, but will still want to use the Free Agent. I need to reformat the Free Agent for the Mac (hopefully for Mac and Windows; while learning to use the Mac and Numbers and Pages I may have emergency jobs that I'll need to do with Excel and Word on the PC), so my plan is to move the files on the Free Agent to the 64GB flash drive, reformat the Free Agent so that, hopefully, the Mac will read the files on it after I move them back to the Free Agent from the USB.
Why don't you copy the content of the Free Agent meanwhile to the Mac's HDD? Then copy it back after re-formatting the Free Agent? Why would you need an extra USB drive?
Any ideas you have about how to achieve this objective will be appreciated. Maybe I should buy a third, small, external hard drive? Maybe there is a way to move the Windows files from the Seagate to the LaCie?
Exactly... you seem to have already extra space on the LaCie drive...
My understanding is that the Apple Store does not want to move files from an external hard drive to the Mac.
I don't know where this could origin, but that's as wrong as it is funny. What has the App Store to do with you moving some files from one drive to another?
I should add that I don't have enough remaining free space on the PC hard drive to hold the files on the Free Agent, so that is not an option.
No, but you have a Mac with a built-in HDD, and you got the LaCie drive. Again, the Mac should have neither a problem to read from the Free Agent, nor to write to the LaCie.
From what you're telling here, you have lots of space already with what you have, I can't see the need for the USB flash drive, at least not for the purpose you mention here.
It seems that your understanding is that (a) a drive comes in a particular format for, or not for Mac, and you can't change it, and (b) that for some reason (App Store?!) Macs aren't allowed to copy files from external files. Well, both is wrong...

Is Microsoft Ergonomic Keyboard 4000 compatible with Mac mini?

Hi, I am thinking of getting a Mac mini. I currently have a Microsoft Ergonomic Keyboard 4000 which I use with my HP laptop. Does anyone know if it is fully compatible with Mac mini?

It is compatible -- to a certain extent.
The Windows key will become the  (Command) key. The Mac will let you know that the keyboard you plugged in couldn't be identified, so it will ask you to type the Z key, followed by the / key. Choose ANSI and you should be ready to use the keyboard. Any multimedia keys or extra keys not part of the standard keyboard layout will have no function. The F12 key becomes the Eject key.
(PS/2 keyboards are not compatible with the Mac, unless you purchase a $15 PS/2-to-USB converter.)

Is isight external camera compatible with mac mini?

I just bought an old isight camera from ebay. I used a firewire 800 to 400 cable to connect to my late 2012 mac mini. I test to cam using facetime but the screen said no camera connected. So I connect the isight with my old macbook to test the camera, and the connection is fine.
I wonder if the old isight cam is still compatible with mac mini. If so, that might be the problem of the fire 800 to 400 cable.

Other users, including myself, could not get the barrel iSight camera to work on the 2012 Min with Mavericks. It did work on my late 2009 Mini except the mic did not work. It does work on my late 2013 Mac Pro desktop except again, that the mic does not work.

Is benq GL2440 monitor compatible with Mac Mini (early 2011)

Hey all
Bought a Benq GL2440 monitor to go with my mini (not latest, previous)
but when connected via HDMI nothing but a msg saying 'no cable connected'
Any one got a solution ?

That's correct, the link perfectly describes the Apple 20" Cinema Display I have. With the new Mac Minis requiring an HDMI cable to link to a display, the HDMI to DVI (female) adapter looks like the one I need. I found this on Amazon: http://www.amazon.com/Gino-Black-Female-Converter-Adapter/dp/B006Z8N60C/ref=sr_1 _18?s=electronics&ie=UTF8&qid=1371158207&sr=1-18&keywords=hdmi+to+dvi+adapter+ca ble
This adapter is an all-in-one plug with no cable linking the HDMI to the DVI ends. It looks like it might be too wide to plug in anything immediately adjacent to the HDMI socket on the Mac Mini due to the width of the adapter when the adapter is plugged in. However, I could get around this by purchasing an extension cable with HDMI male on one end and the HDMI female on the other if I had to.
However, one of the comments said that the DVI is video-only and that another cable is required for audio. Can I assume that plugging in either or both of the other connections (a USB and a FireWire) coming out of the 20" display will take care of audio?
That leads to another answer, but I'm confident that I'm almost there thanks to your help. Close enough to mark this as "solved". Thank you! Let me know if you have any further thoughts with regard to the audio though.

Using Cinema Display and Samsung LCD with One Mini

I have been trying unsuccessful to output the DVI of my mini to my 23" Apple Cinema and my Samsung 4669F (native resolution of 1920x 1080p). I have tried various methods including using the Gefen 1:2 DVI Splitter (Ext-DVI-144) and a DVI-HDMI cable to the samsung in conjunction with SwitchResX, all to no avail.
Any help?- I wish to mirror the same display on both LCD screen simultaneously?- However, I would settle for a solution of a convenient A/B switch? ANy tips?
What about an external USB video card for the Mini- that should work too?- any tips?
I used SwitchResX because I determine that because the 23" ACD was 1920 x1200, the Samsung was not displaying because the Gefen splitter box was sending the same signal in 1920 x1200 to the Samsung, which was not accepted by the Samsung whose native resolution is 1920 x 1080p. However, once I switched the resolution to 1920 x 1080 to force an out of the mini to that resolution, there was no display at all on the 23" ACD and I had to do a safe mode reboot to recover the display on the 23" ACD?-
One would think that it would be relatively easier for Apple to create a script that would allow a person to display 1920 x 1080p on the Cinema Display, a script that overrided the message from the ACD that tells the mac mini to stretch any resolution to 1920x1200 before it gets to the 23" - This way I could use SwitchResX and the Gefen splitter to output 1920x1080p to both displays at once (of course the 23" ACD would have to have some black borders on the top and bottom. Why doesn't apple make this available? - Spent $900 on this monitor and the Mini has a DVI output- why should the Gefen splitter be rendered useless simply because my other display is a different native resolution.
Message was edited by: sidebysidefootball

Of course it is!
(I've got this problem for 3 month now)

Web Camera compatible with Mac mini

Could someone recommend a web camera that is compatible with the Mac mini. I bought a Dynex DX-DTCAM that said it works with Mac's but it doesn't. Any help is much appreciated.

Welcome to Apple Discussions!
You might find the (brief) thread at http://discussions.apple.com/thread.jspa?threadID=1144969&tstart=0 of some interest in terms of webcam compatibility as a whole.
Not sure about the Dynex you have - it is certainly claimed to be MacOS X compatible, though not exactly which version(s) of MacOS X it works with. Assuming you've installed the drivers with the cam from the CD it came with, you might look at t http://www.dynexproducts.com/pc-459-10-dynex-desktop-web-camera.aspx to see if the Windows and Mac driver download on that page offers a later driver for Macs. The 'readme' file is dated June 2007 and it claims it's for MacOS 10.3 and later.

Is my HP wired mouse compatible with Mac mini?

Hi.
I am planning to have a Mac mini. I wanted to know if my 2009 HP wired mouse (Wired) USB 2.0 is compatible with the new Mac mini that supports USB 3.0. I just want to know before I purchase the Mac mini.

Doughnut365 wrote:
Hi.
I am planning to have a Mac mini. I wanted to know if my 2009 HP wired mouse (Wired) USB 2.0 is compatible with the new Mac mini that supports USB 3.0. I just want to know before I purchase the Mac mini.
USB3 will support USB2 devices much more easily than the other way around. Personally, I'd use more tham compatibility with a mouse I laready have to base a computer buying decision on, but I'm not everyone.
I have a Microsoft mouse that works when I need a wired mouse, but I primarily use the Apple Magic Mouse.
1. It's Bluetooth so it doesn't tie up a USB port (wired or with a receiver).
2. It's much more "user friendly" once you learn all it can do.
3. I prefer the ergonomics of it.

Apple Wireless Mouse - No Longer Pairs with Mac Mini?

Hi there,
I've had an Apple Wireless Keyboard and an Apple Wireless Mouse for several months. Unfortunately, the Apple Wireless Mouse no longer pairs with the Mac Mini (Core Duo, 1.66) -- it is getting very frustrating.
I've tried rebooting the machine, restarting the mouse, and nothing works. Sometimes I get the Bluetooth Setup Assistant which says that it found 1 Mouse, but it failed to pair.
I replaced the batteries, but nothing changes.
Help!

Normally that's caused by debris under the trackball preventing the rollers from moving. Turn the mouse upside down and rub the trackball Vigorously with a microfiber cloth.
The symptoms are usually that scroll will work one direction but not the other.
Captfred

Is the Microsoft 5MH-00001 Wired Desktop 400 keyboard and mouse compatible with mac mini?

Hello, is the Microsoft 5MH-00001 Wired Desktop 400 for Business mouse and keyboard compatible with the mac mini computer? I tried using a generic mouse and the lights of the mouse were on, but I could not click or move the mouse around. Then when I plugged in a dell keyboard, it said the "keyboard is not identified". I could press buttons on the keyboard, but they werent being registered by the mac. I also tried changing my mouse's usb to a different port, but still did not work. So I am worried that the microsoft wired mouse + keyboard I ordered might not work on my mac mini. Is there a way to get my old keyboard and mouse to work at least?

Were these other ones you tried Wired also? If so that's really strange!?
Did you try rebooting with them connected?
I see no reason for the Microsoft 5MH-00001 Wired Desktop 400 for Business to not work, but then any wired Generic KB should work!???

Apple Pro Speakers from G4 Cube with Mac mini

To listen music with my Mac mini, I used Apple Pro Speakers that originally came with the G4 Cube.
But since june 2010, my system (Mac OS X) does not recognize these speakers.
The error message (via command 'dmesg') is :
Couldn't alloc class "AppleUSBTrinityAudioDevice"

It's a problem with Mac OS X 10.6.4:
http://discussions.apple.com/thread.jspa?threadID=2467178
We are waiting a patch from Apple...

Is Adobe Photoshop Elements 11 compatible with Mac Mini 1.66GHz Intel Core Duo

Hello, I’m using Mac Mini 1.66GHz Intel Core Duo with Mac OSX 10.6.8 Snow Leopard. When I try to install Adobe Photoshop Elements 11 I receive this error message: “Some errors occurred during installation. Adobe Elements 11 can be installed on 64-bit systems only.” Here is the question: is Photoshop Elements 11 compatible with my computer and operating system? I guess my computer runs at 32-bit. Why do I receive that error message when I try to instal the Trial version of the software? I have read that Photoshop Elements 11 is compatible with both 32-bit and 64-bit systems. Thank you.

On prodesigntools.com
http://prodesigntools.com/photoshop-elements-11-premiere-elements-11-are-out-pse-pre.html
they say Photoshop Elements 11 running native in 32-bit:
Photoshop & Premiere Elements 11 will run well on 32-bit or 64-bit systems, and are designed for Windows XP, Vista, Windows 7, Windows 8, or Mac OS v10.6 through v10.8 (see the full system requirements for PSE 11 on Windows/Mac; and PRE 11 on Windows/Mac).
Premiere Elements 11 comes with a native 64-bit version for higher performance – in other words, the PRE Editor now runs native on both 32-bit and 64-bit operating systems.
Photoshop Elements 11 continues as before, running native in 32-bit and compatibly on 64-bit systems.

Laser printer & Scanner compatible with Mac mini?

I'm currently using an Epson Stylus Photo 820 printer and Epson Perfection 1250 scanner which I had with my iMac on OS9.
I would like suggestions and or recommendations for a reasonably priced laser printer and scanner that would be compatible with my Mac mini.
What are your thoughts on an All-In-One, altho I don't need the FAX.
And would it be a Post-Script printer? As now, when I print from Adobe Photoshop I'm told it will ignore settings as I'm printing to a non post script printer?
Any information appreciated.
Ruthi
MacMini with Tiger 10.4 Mac OS X (10.4.3) can contact me direct: [email protected]

Ruthi,
I personally use a Brother HL-2070N monochrome (black & white) laser printer. Got it at the local office supplier for like $99.
OS X has the proper drivers for it, and although there are no options whatsoever in the Printer Setup, it prints flawlessly. And the pages look how I want them to.
Actually on a WinXP machine I had where there was tons of options that you could set, I could never get it to print this good, or fit it properly to the page.

CS4 compatible with Mac Mini (OS 10.9)

I bought a new Mac Mini with OS 10.9 (Mavericks) and am getting error 150:30 when I try to open my CS4 on it. Before I bought the new Mac, I researched to make sure CS4 would work with it and Mac said they tested it and it would work.

Install it with sufficient user privileges and also run it that way. Also fix the permissions on your user Library folder so the licensing stuff can actually work.
Mylenium

Is an Apple Cinema Display (ca 2005) Compatible with Mac Mini?

Similar Messages

Maybe you are looking for