Is any difference in the CDR output format of CUCM version 6.1.5 and 7.1.5?

Hello,
Customer has a CUCM 6.1.5 cluster which is getting upgraded to 7.1.5. currently the CUCM CDR is sent to a external system (performix) which generates required reports. I would like to know if there is any difference in the CDR output format of CUCM version 6.1.5 and 7.1.5/ its vital to confirm this prior to upgrade as the performix is managed by a different vendor.
Please advise !
Shahid

You can review the CDR documentation here to find that out, most likely there might be some changes
Maintain and Operate Guides
http://www.cisco.com/en/US/products/sw/voicesw/ps556/prod_maintenance_guides_list.html
CDR admin guides have the field definitions.
HTH
java
If this helps, please rate
www.cisco.com/go/pdihelpdesk

Similar Messages

Where are some samples showing the various output formats?

Are example PDFs with various output conversions from ExportPDF available on this site?
I have looked around for a while on this site and did not find any. It would be helpful to see several PDF files and their conversions to the different output formats. In particular it would be nice to see how converting to Excel and MSWord are handled for a few different PDF documents.

sorry. i should clarify this. I know where they are. I would like to know, how can i force them to be saved to, and always be read from, another place, like an external disk?
Thanks for any pointers.

HT1604 Is there any difference between Mac OS Extended Format and ExFat?

Is there any difference between Mac OS Extended Format and ExFat? I read in a blog that the ExFat was a good way to format an external drive because it avoided many of the pitfalls of the other formats, as long as it is supported by the operating system. I tried to format my new Seagate drive, and got an invalid option error. I was able to format it in Mac OS Extended format. Can you please tell me if this is similar to ExFat. Thanks.

The Mac OS format can only be natively read to and written to by a computer running the Mac OS. This creates a problem if the user wishes his external, or other drive to have seamless compatibility between two different OS's, such as Windows and Mac. Yes, there are software solutions that enable a Windows PC to work with a drive formatted as Mac OS, but it gets complicated if you wish that drive to have compatibility "on the fly" with any PC you may encounter.
It turns out that the format known as ExFAT is able to be natively read by both a Mac and a PC, without running any additional drivers on either machine. ExFAT also doesn't have some of the limitations of FAT32, which both OS's will also read/write.
ExFAt is not perfect though. Formatting the drive as Mac OS Extended has some advantages on a Mac. First, it is the only format that permits all functionality of the Mac OS, such as using the drive for Time Machine.
ExFAt is often thought of as the best middleground for an external partition/drive that needs to have easy cross platform compatibility between a Mac and PC running Vista or Windows 7.

Is there any difference of the Downloading speed of Folio if i'm in Enterprise or Professional Editi

Hi Adobe,
I have compared the downloading time between Adobe Multi-Viewer and Zinio App(also hosting digital magazine), I found out that it is so much faster in Zinio.
Are there any difference of the downloading speed if let's say the I'm in Enterprise or in Professional edition?
Thank you for the response!

There is no speed throttling that I’m aware of.
Bob

Any difference in the architecture of VC 7.0 and VC 7.1

Hi All,
Can anyone explain me if there is any difference in the architecture of VC 7.0 and VC 7.1
Also, is there any diff in terms of browsers for the applications deployed on Adobe Flex and WD HTML
Nikhil Bansal

Hi,
Check the below Blog .for Arctitecture Differences between VC7.0 and VC7.1 .
SAP NetWeaver Visual Composer
The Mian differences b/w the Adobe Flex and the HTML Runtimes is Look and feel.
Adobe Flex or Flash will give you Very rich good look and feel when compared to HTML ,and also it supportes so many fetaures in VC.
HTML Runtime is very Old Run time in VC
Thansk,
Govindu

I'm trying to extend the range of an Airport Extreme 802.11g by adding an Airport Express 802.11n. I set the Express up to join the existing network, but it does not make any difference in the range of the network. What's wrong?

I'm trying to extend the range of an Airport Extreme 802.11g by adding an Airport Express 802.11n. I set the Express up to join the existing network, but it does not make any difference in the range of the network. What's wrong?

Let me see if I can help you with the basic WDS configuration steps:
Note: To help facilitate the setup, temporarily connect the AXn directly to the AEBS LAN port using an Ethernet cable. Once the setup is complete, you can move the AXn to the desired location. For all configuration steps you will be using the AirPort Utility. Before starting, be sure to jot down the AppleIDs for both base stations.
802.11g AirPort Extreme Base Station (AEBS) Configuration
AirPort Utility > Select the AEBS > Manual Setup > Wireless tab
Wireless Mode: Participate in a WDS network
Manual Setup > WDS tab
WDS Mode: WDS main
Allow wireless clients (checked)
WDS Remotes: <enter the AppleID for the AXn here>
Click on Update and allow the base station to restart.
802.11n AirPort Express Base Station (AXn) Configuration
AirPort Utility > Select the AXn > Manual Setup > Wireless tab
Wireless Mode: Participate in a WDS network (Note: You may have to hold down the Option (Mac) or Control (PC) key to see this option in the list.)
Manual Setup > WDS tab
WDS Mode: WDS remote
Allow wireless clients (checked)
WDS Main: <enter the AppleID for the AEBS here>
Click on Update and allow the base station to restart.

There's any difference between the 2 ways

i need to update specific infotype record.
there's 2 ways:
1) update the specific record the disadventage is that
   the update doesn't pass sap date check from the screen.
   in addition, i can't use batch input because while i
   lock the employee i need to update other record.
2) from dynamic event in modify record.
   in this way it's pass sap date check ? ?
for finally, is there any difference between the 2 ways ?

Hi,
If you use the BAPIs 'BAPI_EMPLOYEE_ENQUEUE' & 'BAPI_EMPLOYEE_DEQUEUE'
before and after each function call to 'HR_INFOTYPE_OPERATION', you should be able to update mutiples infotype records for the same employee in a single Program.
2). Are you referring to Dynamic Actions?
Regards,
Suresh Datti

What is the possible output format for a BAPI ?

Can anybody tell me what is the possible output format of a BAPI.
What happens when a BAPI excecutes ?
thanks

Hi,
All the output message/feedback about a trasaction are stored in the RETURN parameter table .
You can read that RETURN internal table using "format message" or "Read_Text" Fucntion modules.
Thanks
Dany

Is there any difference between the 2 different USB cords when syncing???

I know this may be a paranoid question to ask but I just wanted to make sure.
Is there any difference between the newer USB cords with the shorter plug (the end that goes into the iPhone) and the older ones with the bigger, square-shaped plugs that you can pinch on the sides to retract?
Is there a difference in transfer speed, syncing speed, or reliability, or build quality?
Just asking cuz the newer USB cord that came with my iPhone 3GS is getting frayed and so I'm using the older one instead.
Thanks to whoever helps.

No difference except, as you noted, you have to squeeze the older one to remove it. It's important that you do that so you don't damage it or the iPod.

What's the best output format to burn a dvd with?

what's the best output format to burn a dvd with? I normally select a h264, but i don't know which preset i should use (between "match source high bitrate and hd1080...)

A DVD is Standard Definition... export using the MPEG2-DVD preset and import the TWO (audio and video) files in Encore for authoring
CS5-thru-CC PPro/Encore tutorial list http://forums.adobe.com/thread/1448923 will help
The bottom section of the link above has several Adobe links, and other information, on downloading Premiere Pro CS6 and the bundled Encore CS6, and the TWO ADDED downloads for the Encore library content, to author a DVD or BluRay... and the tutorial list includes learning how to use Encore... pay particular attention to the picture in reply 3 at this link - https://forums.adobe.com/thread/1516173

Is there a difference between the earphone output and the audio output of the docking connector, or is it in fact the same signal ?

Is there a difference between the earphone output and the audiooutput of the docking connector of the iphone 4, or is it in fact the same signal ?

One basic difference is that the LTE frequencies each is able to operate on are different. After that, it is pretty much the same phone. Others might be able to add to this.

I'm currently living in Japan. Is there any difference between the US iPad(wifi) and a Japanese iPad(wifi)? Or should I wait till I visit the States to pick one up?

I'm thinking of buying a new iPad3 but I'm currently living in the Japan. Is there any difference between the US and the Japanese iPad (wifi version)? If so, what are the differences?
Thanks,
-F

Hi, I just watched the video for the Microcell and you have to use your broadband connection to get it to work and the problem is my broadband connection is down the times I'm using my 3G. That's why I use it, because my broadband connection is not working so much of the time.
Any other suggestions? :-)
Martha

Is there any difference between the commerical product and the Teacher/Student version?

In Adobe Photo Shop Elements 13 and Premiere Elements 13 is there any difference between the commerical product and the Teacher/Student version? I don't remember them having two versions in the past.

Is there a difference? Sure. Will it be noticable? Maybe.
The 9i client will use one of the 9i ODBC drivers. The 8i client will use one of the 8i ODBC drivers. The 9i drivers will generally have more bug fixes & more features than the 8i drivers. It is possible, though rare, that the 9i drivers will fix a bug whose behavior your application was dependent on and/or introduce bugs that were not in the earlier version. Of course, you have to consider the different features of the underlying clients as well-- i.e. a 9.2 Oracle client cannot communicate with a 7.3.4 database, an 8i client doesn't know how to handle data types introduced in 9i (i.e. TIMESTAMP), etc.
Justin

Is there any difference between the iPad and iPhone cables?

Alot of people are mentioning that there's difference with the speed while syncronising/backup. I am just wondering is there any difference between the cables? and how can I distinguish it? Coz I have most of the i- products and I have just mixed up all the cables >__< Thank you!

I can confirm that iPad/iPod cables are identical. Don't know about iPhone. IF there is a difference, you'll know immediately - function or functions won't work.
There will be NO speed difference. Either the copper is present or it isn't and copper is copper.

Hey i got my ipod 4g touch broken so now im planning to replace its lcd glass as they both come jointly.....let me know if i do so then would there be any difference in the touch of the device...?

Hey i got my ipod 4g touch broken so now im planning to replace its lcd glass as they both come jointly.....let me know if i do so then would there be any difference in the touch of the device...?

If you use a legitimate replacement part it should work fine

Is any difference in the CDR output format of CUCM version 6.1.5 and 7.1.5?

Similar Messages

Maybe you are looking for