Is anyone polite enough to help me, somed

The only reason I'm pissed off is because I've posted this more than a week ago, and NO ONE answered. This has happened to me before on this website, and I'm close to letting everyone know that no one is helpful here...
But I hope I'm wrong.
Last week, the line-in on my Sound Blaster Li've24-bit stopped working and now it only puts out the left signal. This is only occuring for the line-in jack and I'd already checked the cables plugged in. I've had a similar problem occure in the past, though I am not sure how it was fixed. Will somebody please help me?

petmetroid,
Are you saying you are recording only the left channel from a stereo device? Sometimes the jacks go bad. I assume that you have checked your speakers/headphones on others sources and they playback both left and right. Have you tried different cables and recording from different devices? Also make sure the left and right recording input is balanced (Windows Mixer) or set to equal volume (Creative Mixer).
petmetroid wrote:
The only reason I'm pissed off is because I've posted this more than a week ago, and NO ONE answered. This has happened to me before on this website, and I'm close to letting everyone know that no one is helpful here...
But I hope I'm wrong.
Last week, the line-in on my Sound Blaster Li've24-bit stopped working and now it only puts out the left signal. This is only occuring for the line-in jack and I'd already checked the cables plugged in. I've had a similar problem occure in the past, though I am not sure how it was fixed. Will somebody please help me?Message Edited by Katman on 07-0-2006 05:02 PM

Similar Messages

  • How do you get of hold of anyone at Adobe for help?  Cannot download Photoshop CC.

    I could not update Photoshop CC from Creative Cloud desktop or online. I need Raw 8.3 to be compatible with Lightroom.  It is impossible to get a hold of anyone at Adobe for help.  Found their chat link once after much searching, someone finally answered then told me they were closing for the day and to call back the next day.  Could never find the chat link again.  Tried uninstalling PhotoshopCC because I saw that somewhere in the forum but still cannot download Photoshop CC.  Got error code U43M1U49 and said to retry or contact customer support.  Yeah right!  Totally frustrated with Adobe.  Anyone have any suggestions?

    Triste wrote:
    I update application manager and was able to load Adobe Premier CC from on
    line upload center.  When I tried to update more apps from the desktop CC,
    still failed.  Tried to update Adobe Premier CC from help, mostly worked,
    but got an message to close LogTransportApplication which I could not find,
    did not show in my Task Manager when tried to find it, so could not update
    Premier CC.  Updates still failed from desktop Adobe CC.
    Hi Triste,
    If you're having difficulties getting updates for your tools using the Creative Cloud Desktop app, then you can try downloading them without it by using the direct links for the CC updates on Windows or on Mac OS, for all CC apps.

  • TS3988 I have an icloud account and I view my mail with Mail V5.2. I recieve my email but the senders get messages saying the delivery failed. Can anyone explain this or help me.

    I have an icloud account and I view my mail with Mail V5.2. I recieve my email but the senders get messages saying the delivery failed. Can anyone explain this or help me.

    Thank you for replying.    Yes I deleted the old email address..   

  • I am trying to open some *.avi files in quicktime, they are from my security camera at home.  It will not open them, would anyone be able to help me?  It says I need a plugin but it does not tell me which one.

    I am trying to open some *.avi files in quicktime, they are from my security camera at home.  It will not open them, would anyone be able to help me?  It says I need a plugin but it does not tell me which one.

    I am trying to open some *.avi files in quicktime, they are from my security camera at home.  It will not open them, would anyone be able to help me?  It says I need a plugin but it does not tell me which one.
    Basically your player is telling you that you need to install the codecs that will play the compressed data within the AVI file.
    AVI is a legacy file container in which the tracks of data are interleaved to maintain synchronization. This data can be encoded using many different audio and video codecs. Your problem is to determine which codecs you need for the player you are trying to use and install them if they are available. Failing that, your will either have to play the files in a different player which has the codec support your require built into the app or convert the content to a compression format that is natively compatible with the player you wish to use.
    Since you have not stated what platform, operating system, and particular player you are targeting for playback, it is difficult to provide precise instructions for fixing your specific problem at this point. Suggest you try alternative players compatible with your system and platform to see if they will play the files, use a dedicated media information utility to determine the codecs needed for playback, or post a sample file for analysis.

  • HT1386 WHILE SYNCHING iPHONE 3 WITH iTUNES. MY 1700 CONTACTS VANISHED FROM iPHONE AND iTUNES. I AM RUNNING AROUND TO GET IT RESTORED. ANYONE THERE WHO COULD HELP. HOW CAN I RESTORE AND GET MY CONTACTS BACK.

    WHILE SYNCHING iPHONE 3 WITH iTUNES.
    MY 1700 CONTACTS VANISHED FROM iPHONE AND iTUNES.
    I AM RUNNING AROUND TO GET IT RESTORED. ANYONE THERE WHO COULD HELP.
    HOW CAN I RESTORE AND GET MY CONTACTS BACK.

    Try:
    - Powering off and then back on your router.
    - iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
    - Change the DNS to either Google's or Open DNS servers
    Public DNS — Google Developers
    OpenDNS IP Addresses
    - For one user uninstalling/reinstalling iTunes resolved the problem
    - Try on another computer/network
    - Wait if it is an Apple problem
    pinto123 wrote:
    i did every thing you said and when i went to restore this is what happened: the ipod software update server can not be contacted. make sure your network settings are correct and your network connection is active, or try again later. what do i do to restore.     i used the last way to do it the dfu

  • HT4557 Shared libraries from other people's libraries showing up permanently on MacBook Pro. And a lot of purchased and ripped songs vanished... Anyone...please help...?!?!

    Shared libraries from other people's libraries showing up permanently on MacBook Pro. And a lot of purchased and ripped songs vanished... Anyone...please help...?!?!
    The home sharing is now off and still has all the songs one there. Even rebooted the wifi modem, supporting hard drives and all computer involved in this catastrophe!! :( all computer are all updated and updated to the new iTunes.
    Please any help would be greatly appreciated and any more questions welcome. Thanks

    Basically anything not purchased from iTunes that is on my iPhone 6 will not sync over to my MacBook. I have tried to just manually back it up but only the purchased music will sync over to iTunes.

  • My photoshop crashes when i double click, it says that it has stopped working and that i should check online for a resolution, anyone got anything to help me

    my photoshop crashes when i double click, it says that it has stopped working and that i should check online for a resolution, anyone got anything to help me

    i found out my prob!
    here is what you do.
    go to the "system preferences" on your dock.
    click "software updates".
    click "installed software"
    if it shows something about a recent update about "EFI UPDATE, FIRMWARE, THUNDERBOLT" or anything like that, exit out of it.
    go to mail.
    click "mail" at the top.
    click "preferences...".
    find the account you are having trouble with, once you do, make sure its highlighted, then click the "-" at the bottom of the window (this will only effect that mail account, it will not effect your ical weather or not its synced thought that email account)
    hit the "+" (right next to the "-") and add your accout back!
    its something with that update that effected mail, i hope this works out for you, if not reply back

  • When trying to activate my iPad 3 I get a message that the activation server is temporarily unavailable.   Does anyone know how to help me activate my iPad?

    When trying to activate my iPad 3, I consistently get a message that the activation server is unavailable, Please Try Again.    Does anyone know how to help me?

    It is not bricked... I think I finally found the way:  http://www.imore.com/how-fix-activation-errors-iphone-after-installation-ios-7-b eta.
    The above artical started to help.. but eventually I did the following:
    1) put device into DFU mode
    http://www.imore.com/tip-put-iphone-ipad-dfu-mode
    2) when connecting ipad to itunes, itunes was aware of DFU mode.  Just selected the update and itunes downloaded the correct new OS (iOS 7.0.2) and did it's thing.
    Note: there was no need to download an older version of iOS.  In fact, I was always rejected when attempting a downloaded ipsw.  iTunes always said, "This device isn't eligible for the requested build".
    Device Info: iPad 3 wifi.  Software was iOS beta 7 (7 release 5 I think). 

  • HT4098 I still have 6 months left on the subscription and I want to cancel now before I forget but the auto-renewal selection is not a choice. Anyone knows why? Help please. TY.

    I would like to unsubscribe a magazine 6 months before its auto-renewal, but I do not have the choice of auto-renewal on/off. Anyone knows why? Help please. TY.

    Take a look at this     iTunes Store: Purchasing and managing auto-renewing subscriptions

  • HT1926 I am trying to delete an old version of itunes in my ibook G4 so I can install the newest version and can not delete the old version because it says I don't have enough privileges, help?

    I am trying to delete an old version of itunes in my ibook G4 so I can install the newest version and can not delete the old version because it says I don't have enough privileges, help?

    iTunes is not installing because its incompatible with your OS. When installing the correct version the new version will update the older version, there is no need to uninstall first.
    The last version of  iTunes compatible with OSX 10.4 is iTunes 9.2.1
    You can down load iTunes 9.2.1 here:
    iTunes 9.2.1

  • HT1378 my ipod got wet, when it dried out completely, i powered back up but i do not have wifi capabilities.  Anyone know how to help?

    my ipod got wet, when it dried out completely, i powered back up but i do not have wifi capabilities.  Anyone know how to help?

    What does when have to do with it? Liquide damage is not covered by the warranty.
    Tomo 2 wrote:
    When did you purchase it?
    For the poster, try here if it is your problem.
    iOS: Wi-Fi or Bluetooth settings grayed out or dim
    HOwever, if you rerestored to factory defaults/new iPod and still have the problem then that points to hardware damaged caused by the water. Service is required.

  • HT4623 cannot load ios6 on my ipad.  capacity is 28.6 gb and i have 15.3 gb available.  isn't that enough?  help please.

    cannot load ios6 on my ipad.  capacity is 28.6 gb and i have 15.3 gb available.  isn't that enough?  help please.

    That is more than adequate space available. What error message do you see? Which model of iPad do you have? The iPad 1 can not be upgraded beyond iOS 5.1.1.

  • A CR remote ODBC connection question for anyone brave enough to jump in.

    Greetings.
    Been working with CR 2008 for about a month now, having great success. Two days ago it all went south as I hit a brick wall. Yep, I'm a relative newbie to CR, but I've been doing IT for many years. This has really got me stumped. Any takers?
    My testbed:
    I have a segregated network with two PCu2019s  (A and B). PC (A) is running XP-Pro (32-bit) at IP 192.168.1.104, while PC (B) is running Win 7-pro 64-bit at IP 192.168.1.100.
    I installed CR 2008, Oracle 10g Express and MySQL Server 5.5 on both, so they are both configured identically from a database/server perspective.   Both use Norton Internet Security 2011.
    Oracle EX came with a sample HR database. I added a normalized Innodb compliant northwind database to the SQL Server and verified both installations.
    Both CR programs on PC(A) and on PC(B) can connect without issue to their respective local databases.  The HR database has been successfully (locally) accessed by CR. The Oracle northwind database has also been successfully accessed (locally) by CR.
    The problem:
    When running CR on PC(A), I cannot find a way to successfully connect it (i.e., CR) via ODBC to the other databases on PC(B) - or visa versa. 
    I have eliminated the obvious possibilities like firewalls or improper port addressing. Strangely, I can create DSNs on PC(A) that tells me it successfully connects to the target DB on PC(B), but for whatever reason I cannot get CR on the same machine to successfully use the same DSN that just successfully connected without CR. ARRRggggggg!
    For example:
    Step 1:
    I set up a System DSN as follows on PC(A) in my attempt to connect to the target HR database on PC(B):
    System DSN: HR-Fastsob
    Driver: CR Oracle Wire Protocol ODBC Driver 5.3
    Standard connection, Host: 192.168.1.100
    Port: 1521
    Service name: XE
    Step 2:
    I click on the Test Connect in the u2018ODBC Oracle Wire Protocol Driver Setupu2019 window.
    It responds with a u2018Logon to Oracle Wire Protocolu2019 window, in which I am prompted to enter the User Name and password. On the Oracle Express setup, I configured the database instance with root access as User: u2018SYSTEMu2019 and Password: u2018Passwordu2019, so I figured these should be the correct credentials.
    I click the u2018Test Connectionu2019 connection button and breathe a sigh of relief as it tells me Iu2019ve u2018successfully connectedu2019.
    Step 3:
    3.1 - I launch CR
    3.2 u2013 I create a new blank form
    3.3 u2013 I create a new connection
    3.4 - I click on ODBC (RDO)
    3.5 - I select the HR-Fastsob DSN from the list of DSNs.
    3.6 - Click next
    3.7 - An ODBC (RDO) connection window appears.  Iu2019m prompted to enter the user ID and password (SYSTEM and Password respectively), then hit the u2018Finishu2019 button.
    3.8 - A u201CLogon Failedu201D pop-up appears. I hit the u2018OKu2019 button.
    3.9 - Another popup appears saying u201CDatabase Connector Error: u201808s01:[Crystal Reports][ODBC Oracle Wire Protocol driver]Connection refused. Verify Host Name and Port Number. [Database Vendor Code -1]u201D. I sigh, then hit the u2018OKu2019 button.
    3.10 u2013 Yet another window appears saying u201CLogon filed. Details: 08001:[Crystal Reports][ODBC Oracle Wire Protocol driver][Oracle]ORA-12203: unable to connect to destination [Database Vendor Code -1]. I hit the u2018OKu2019 button.
    3.11 - An ODBC (RDO) connection window appears with my earlier entries (from step 3.7). No matter what I enter, the results are the same.
    Two days later, Iu2019m still scratching my head.
    I'm really hoping there's a guru in here that can feel my pain and who can dumb down the solution to this perplexing problem I'm facing.
    Iu2019m really at a loss. Obviously, I donu2019t fully understand ODBC connectivity well enough.
    The next beeru2019s on me if you get this one.
    Thanks to anyone willing to help me out

    Hi Don....
    Thanks for jumping in -- much appreciated.
    Your suggestion seemed plausible, as I had alternated between the system32 (64-bit) and the sysWOW (32-bit) odbc drivers. I thought maybe I had mixed it up...but alas, that didn't turn out to be the source of my problem. Your suggestion is still valid though, had I been using the 64-bit ODBC driber with a 32-bit CR app.
    I decide to try another approach -- by eliminating CR from the equation altogether. I ran Microsoft excel against the same remote databases using the same DSN and voila.... all worked as I thought it should in the first place. My connection was extremely fast and rock solid.
    This would ( I believe) suggest that the issue is with my version of CR i.e., Developer edition (v12.3.0.601) running on Win 7.
    I tried running CR in compatibility mode XP-Pro SP2, but got the same errors. So now I have to decider whether or not to upgrade to CR 2010 in the hopes it will work on Win 7 Pro 64-bit.
    Thanks again for stepping up.
    warm regards
    Bob

  • Can't seem to talk to anyone who can actually help me!

    I have been trying to get legitimate assistance for my high speed Internet that went down yesterday right in the middle of a final I was taking for school. However after hours of tech support trouble shooting and being hung up on to the hour plus I waited on hold today, I have yet to speak with anyone who can tell me why nobody seems to care about my lack of a connection. I was told the issue is not with my house and is a Verizon field issue but nobody is available to fix this. How is that possible?! It is absurd that I am on day 2 of no Internet when I work from home and go to school online. The amount of data I am using just to post this message is probably absurd. I really need to speak with some sort of management and can't understand why this is such a problem. Can someone please give me a number or email address to someone who can actually help me?!

    If you are having an issue with your Verizon service, you can use the Verizon Troubleshooter to fix and report issues with your Verizon Phone, FiOS TV, or Internet Service, as well as to schedule a repair, here is the link:
    http://www.verizon.com/repair
    You can find tools on the Verizon Residential Support page that may help you diagnose your issue:
    http://www22.verizon.com/residentialhelp

  • RE: CNAME change im stuck can anyone give me some help

    I followed the advice given to me in a post a few days ago. I want to change my domain name over to my new site but really dont know how to do it so wrote to the company and got this reply
    We unfortunatly do not have a system in place that allows us to change the CNAME. If you wish to change the CNAME you would need to transfer your domain name away from us (£15 charge to transfer away) and then with your new registrar you can change the CNAME for your domain name
    I have a question who would be my new registrar and how do I do this know, I tried using ftp and that didnt work so went to change the name over and now that doesnt work either, As im new to this im really stuck what to do. Can anyone help me please

    1. Login into your Godaddy account
    2. Click on Manage Domains and click on your domain name
    3. Click on the "Total DNS" link
    4. Under Host click on the edit link for "www"
    5. For "Alias Name" use: www
    6. For 'Points to Host Name" use: web.mac.com
    7. Click "Ok"
    8. Should update within 24 hours
    from this thread:
    http://discussions.apple.com/thread.jspa?threadID=1086731&tstart=50
    and then
    2)If you're not already logged in to .Mac, go to www.mac.com, and log in.
    3)Click Account in the left column on the .Mac homepage, and confirm your login.
    4)On the Account Settings page, click the Personal Domain button, and then follow the instructions that appear.
    When asked to enter your domain name, be sure to type the entire domain name (including the extension, such as .com, .net) that you've registered.
    5)When you see a screen confirming that .Mac is configured to host your domain, go to your domain name registrar's web hosting area, and point your domain (by adding or changing a "cname record") to web.mac.com
    For instructions on changing the cname register, contact your domain name registrar.
    Please note that the whole process can take up to 48 hours and maybe because of christmas and new year more...
    Regards,
    Cédric

Maybe you are looking for

  • SSL VPN IP Address Assignment from IAS radius server

    Can I use SSL VPN IP Address Assignment from IAS radius server?it can be done with acs server.are there some differ from the acs and IAS?

  • Father's Day in the calendar...

    My iPad and iPhone does not show Father's Day in the calendar when I turn the US Holidays on... It shows Mother's Day along with all the other random holidays (Lincoln's bday, Palm Sunday, etc.) Anyone know why?

  • HP COMPAQ CQ42 258VX Display problem

    Model type : CQ42 258VX PROC : INTEL i5 - 450 2.4Ghz RAM : 2GB DDR3 HDD : 500GB VGA GRAPHICS : ATI Mobility radeon HD5430 - 512MB I have a Compaq notebook CQ42-258VX, recently i must format and reinstall with windows 7 32 bit. The following issues oc

  • Mapping Help required for ORDER Idoc to EDI file

    Hi My source strcture is as follows E1EDP01 E1EDP01    E1EDPT1 (TDID=0001)      E1EDPT2          TDLINE = abcd    E1EDPT1 (TDID=0001)      E1EDPT2          TDLINE = XYZ and my target line item is mapped with TDLINE(Context E1EDP01)-exist then createi

  • Transferring from G5 to PB

    My new PB arrived today and I successfully migrated my spouse and child's user accounts over, but mine was way too large so I tried drag and drop using FW cable and target disk mode. Evidently I didn't get all the essential pieces to maintain my info