Is anyone using testing seeing compiler lock-ups? [SOLVED]

As the title says, is anyone using testing seeing compiler lock-ups? I've been seeing them for about two or three days. Sometimes the system will hang for a few seconds at "Starting make" with 100% CPU usage, then will continue normally. Other times it will stop in the middle of compiling and CPU usage will drop to 0. Also, I've been seeing small hang ups with patches. Maybe four or five seconds when simple patches are being applied. Bringing MAKEFLAGS down to the default 2 from 3 seems to help a tiny bit.

fakeroot would put it in the right time frame. I linked to your bug report Anarconda as it seems like the same problem. As always if anyone has anything to add, please do:
http://bugs.archlinux.org/task/13699

Similar Messages

  • Has anyone used the fpga compile farm toolkit?

    Hello all,
    This is my very first post, I have been trolling these forums for about two months now.  I hope this is an okay board to post this question too.
    My question is if anyone has any experience using the cFPGA compile farm utility, and if it is worth the expense?  The team I work for is getting ready to re-write a mojor peice of software that will be used on 15 C-Rios for a whole bunch of hardware control and data aquisition.  Needles to say we will be doing a fair ammount of compiling and we dont want to tie down our work machines with these tasks, and instead would like to have some older desktops grind it out.
    Thank you so much for any feedback you can give.

    Hi Unavailable
    As I am an Application Engineer and I work for National Instruments, I would like to make an I impartial advice, I will highly recommend you to install the FPGA compile farm toolkit on a computer and use it as evaluation software, that way you could try it yourself and have your own opinion of the toolkit.
    I think that if you will have to run many compilations it might be a good inversion. But as I told you above it will be better to try it and decide for yourself.
    Regards
    Esteban R.

  • I am getting frequent lock-ups and blue screens during boot up. The lock ups occur during normal use and I cannot click anything or force quit. The cursor shows something is loading, but never stops. I have to use power button. Ideas?

    I am getting frequent lock-ups and blue screens during boot up on my Mac Pro.  The lock- ups occur sometimes during normal use and I cannot click anything or force quit. The cursor shows something is loading, but never stops. I have to use power button.
    I had the Mac Defender malware and I have used apple jack but still having issues.

    I am getting frequent lock-ups and blue screens during boot up on my Mac Pro.  The lock- ups occur sometimes during normal use and I cannot click anything or force quit. The cursor shows something is loading, but never stops. I have to use power button.
    I had the Mac Defender malware and I have used apple jack but still having issues.

  • Want to use credit card with firefox but do not see a lock with firefox 5 on linux using priceline

    want to use credit card with firefox but do not see a lock with firefox 5 on linux using priceline

    Type '''about:preferences#applications'''<enter> in the address bar.
    Now follow the picture.

  • Has anyone used the Speck See Thru Case and scratched the MacBook Pro?

    Has anyone used the Speck See Thru Case and scratched his/her MacBook Pro?

    Read this thread: https://discussions.apple.com/message/8769665#8769665

  • When i use the apple tv it puts my computer to sleep.  the last time this happened i lost microsoft word with all the documents.  i'm asked to relaunch, but that step fails.  i'm frantic! can anyone help me see my documents again?

    when i use the apple tv it puts my computer to sleep.  the last time this happened i lost microsoft word with all the documents.  i'm asked to relaunch, but that step fails.  i'm frantic!  can anyone help me see my documents again? this also prevents me from reading attachments in my mail, since they are frequently launched in word.

    There's a whole lot to read in your post, and frankly I have not read it all.
    Having said that, this troubleshooting guide should help:
    http://support.apple.com/kb/TS1538
    In particular, pay attention to the mobile device support sections near the bottom, assuming you have already done the items above it.

  • When turned on says Accessorize Test and is locked.  How can I unlock and use it?

    when I turned my 30gb ipod on it says accessorize Test and is locked on this screen.  Any suggestions?

    Reset the iPod. To do this, first make sure the hold switch is in the Off position, then press and hold both the Select (Center) and Menu buttons together long enough for the Apple logo to appear.
    Somehow the iPod start up in diagnostic mode, but the reset should bring things back to normal.
    B-rock

  • P7N SLI Platinum lock-ups

    My specs:
    Q6600 stock speed
    Kingston HyperX pc8500 2x 1gb. I manually set it to it's rated timings, voltage and frequency. I have also tried different ram, from Exceleram and it makes no difference.
    2x Asus EN8800GT 512mb cards (tried using just one card too, tried switching to a different 8800gt card from sparkle too, no change.)
    HDD: Have tried several hard drives, pata and sata from probably all the manufacturers, i dont see why i need to post their specs since they problem persists nomatter what hdd i use.
    Windows XP SP3 proffessional.
    nothing else is in the system, i removed every piece of hardware, like sound card, optical drive, etc. to isolate the problem.
    Power supply: Thermaltake ToughPower 700W
    BIOS Version: the beta bios posted on this forum that supposedly fixes the video corruption bug (it doesnt). Also tried 1.0 and 1.1
    The problem:  random lock-ups. Sometimes it doesnt happen for 2 days and then BAM! Its happening every 15 minutes now. It might stop happening for another 12 hours and start locking up again. It only ever happens when im working in 2d applications like browsing, using messenger or IRC, watching videos on youtube or in a media player, or just moving files around or anything mundane like that.  it once happened when i wasnt touching the keyboard or mouse at all, i was waiting for some files to finish copying over LAN.  I also get the famous video corruption but it is EXTREMELY rare, like once a month.  It crashed the last time the video corruption appeared, once i tried to click the player to pause, the system crashed.  The system will never lock up while playing games, i play medieval II total war for days without any problems.  The store i bought the p7n from tested it for me and they said it worked fine, but they used an ATI card so that may be a clue?  Then again, they are really incompetent and didnt run the right set of tests, and ignored what i had told them about the nature of the crashes.
    Detailed description of the events:  System freezes, first everything except the mouse is frozen but if i try to click with the mouse, it freezes too and the screen flashes a black screen every few seconds.  it never recovers and i have to shut it down by holding the power button for several seconds.  some of the 2d graphics in windows get corrupted with artifacts, and the mouse does get heavily corrupted usually.
    What i've tried:
    I thought the mobo was defective but it isnt, i got a new mobo from the store and it has the same problem. 
    Tried working my way through every combination of memory timings, frequencies and voltages that i thought might make a difference but it has no difference on the crashes.
    All the hardware works perfectly in my Asus P5N32-E SLI motherboard (i bought this msi mobo for some different reasons that i wont go into here), so theres nothing wrong with any of my components.
    The only item i've not had the oportunity to switch with a different one is the power supply, but again, it works perfectly with all other motherboards that i've tried.
    Is this possibly related to the video corruption bug?  Does anyone have any idea when the next bios release is due? Please help, it sucks to buy an expensive motherboard that just doesnt work. i'll have to buy a 3rd sli mobo if I cant fix this.
    PS:  Is it not possible to regulate fan speed for sysfans connected to the mobo's fan connectors? My asus mobo had great fan speed controls in the bios, if this one doesnt have any such options, i call that ridiculous.

    I appreciate your effort, guys. I've tried running the memory in 800mhz and on auto timings and on some other timings too (i was kinda desperate and i messed around with the memory configuration for days with no success), and tried auto volt (it gets set to 1.8 which the memory is rated for at 800mhz) and tried 1.9 and 2.0 and 2.1 and 2.2 and i've tried completely different memory modules too that i borrowed, and tried running in single channel with both modules and running just 1 module.  none of these experiments had any effect on the crashes :\.  But don't you think this could be related to the video corruption bug? I always thought it was, since this problem doesnt seem to happen for me when there is an ATI card in the system.  Not that my 8800gt cards are defective in any way either, they are rock solid on my other motherboard. 
    I have one more theory, some weird inexplicable compatibility problem between this particular PSU and this particular mobo. Think it's a possibility? The psu is the only thing i have not switched out for another component, every other component i have switched for another one that was known to be working fine.
    also, there is the extremely distant possibility that the issue is caused by an issue that the mobo might have with BOTH the kingston and the excelleram modules that i tried, however this seems far-fetched. but this problem is a fact and SOMETHING is causing it. i've eliminated almost everything i can think of.

  • Multiple Panics, Lock Ups and Freezes

    My MacBook Pro running 10.8.3 has been having some random shut downs and lock ups lately, the latest of which took the internal boot drive totally offline. I was able to recover it after booting to my external recovery drive and running DiskWarrior 4 as Disk Utility simply said I needed to repair the drive before mounting it, but then said it was unrepairable after attempting to do so.
    After the DiskWarrior repair, the Mac booted from it's internal drive like there was nothing wrong, but an hour or so later, I had another lock up where everything froze up and was unresponsive and then after a restart I got another hour or so before it shut itself down and then restarted itself, so I'm obviously less than thrilled with the situation.
    This is the factory drive which came with the MacBook Pro when purchased new in January of this year, so I have a hard time believing the drive is physically bad, though I guess anything is possible. Another thing that has me thinking it's not the hardware is that the machine runs fine when booted to the external recovery drive and has no errors or any of the symptoms I've been experiencing.
    Anyway, I've been looking at the panic reports, but I'm honestly not well versed in what any of this means, so I'm hoping one of the experts can chime in and maybe point me in the right direction as I'm running out of ideas :/
    Interval Since Last Panic Report:  2467 sec
    Panics Since Last Report:          1
    Anonymous UUID:                    BBC20339-6AE8-82EA-4368-DCBBCC912FF4
    Anonymous UUID:                    BBC20339-6AE8-82EA-4368-DCBBCC912FF4
    Thu May  2 13:44:42 2013
    panic(cpu 6 caller 0xffffff8025cb7e95): Kernel trap at 0xffffff7fa741c064, type 14=page fault, registers:
    CR0: 0x0000000080010033, CR2: 0x0000000000000010, CR3: 0x00000000443ae021, CR4: 0x00000000001606e0
    RAX: 0x0000000000000001, RBX: 0xffffff81c60a6000, RCX: 0xffffff8048c44000, RDX: 0xffffff81f7773a38
    RSP: 0xffffff81f7773b60, RBP: 0xffffff81f7773b60, RSI: 0x0000000000000000, RDI: 0x0000000000000000
    R8:  0x0000000000000000, R9:  0x00000000000003ff, R10: 0xffffffffffffffff, R11: 0x00000000ffffffff
    R12: 0xffffff81c60a6000, R13: 0x0000000000000000, R14: 0x0000000000000002, R15: 0x0000000000000000
    RFL: 0x0000000000010246, RIP: 0xffffff7fa741c064, CS:  0x0000000000000008, SS:  0x0000000000000010
    Fault CR2: 0x0000000000000010, Error code: 0x0000000000000000, Fault CPU: 0x6
    Backtrace (CPU 6), Frame : Return Address
    0xffffff81f7773800 : 0xffffff8025c1d626
    0xffffff81f7773870 : 0xffffff8025cb7e95
    0xffffff81f7773a40 : 0xffffff8025ccd4dd
    0xffffff81f7773a60 : 0xffffff7fa741c064
    0xffffff81f7773b60 : 0xffffff7fa7405d64
    0xffffff81f7773bb0 : 0xffffff7fa7405cba
    0xffffff81f7773bd0 : 0xffffff7fa73e17ae
    0xffffff81f7773c00 : 0xffffff7fa62b03a0
    0xffffff81f7773c40 : 0xffffff7fa62b030f
    0xffffff81f7773c60 : 0xffffff7fa62b575c
    0xffffff81f7773cf0 : 0xffffff7fa62ade50
    0xffffff81f7773d20 : 0xffffff7fa62feb8b
    0xffffff81f7773d70 : 0xffffff8026032e7b
    0xffffff81f7773dc0 : 0xffffff80260634f7
    0xffffff81f7773e30 : 0xffffff8025c97fef
    0xffffff81f7773e80 : 0xffffff8025c20aed
    0xffffff81f7773eb0 : 0xffffff8025c10448
    0xffffff81f7773f00 : 0xffffff8025c1961b
    0xffffff81f7773f70 : 0xffffff8025ca5dd6
    0xffffff81f7773fb0 : 0xffffff8025ccdd43
          Kernel Extensions in backtrace:
             com.apple.iokit.IOGraphicsFamily(2.3.7)[74E3E50F-E50A-3073-8C96-06F854292A91]@0 xffffff7fa62a4000->0xffffff7fa62dbfff
                dependency: com.apple.iokit.IOPCIFamily(2.7.3)[1D668879-BEF8-3C58-ABFE-FAC6B3E9A292]@0xffff ff7fa6266000
             com.apple.NVDAResman(8.1)[A26D2A3D-C06F-3A0F-BCFF-901A98C93C3D]@0xffffff7fa62fb 000->0xffffff7fa6608fff
                dependency: com.apple.iokit.IOPCIFamily(2.7.3)[1D668879-BEF8-3C58-ABFE-FAC6B3E9A292]@0xffff ff7fa6266000
                dependency: com.apple.iokit.IONDRVSupport(2.3.7)[38C214C0-83C8-3594-8A4C-DC6AC3FEC163]@0xff ffff7fa62e7000
                dependency: com.apple.iokit.IOGraphicsFamily(2.3.7)[74E3E50F-E50A-3073-8C96-06F854292A91]@0 xffffff7fa62a4000
             com.apple.GeForce(8.1)[A15BB65E-3501-340F-87CB-2FD2BAD33E35]@0xffffff7fa73de000 ->0xffffff7fa74aafff
                dependency: com.apple.NVDAResman(8.1.0)[A26D2A3D-C06F-3A0F-BCFF-901A98C93C3D]@0xffffff7fa62 fb000
                dependency: com.apple.iokit.IONDRVSupport(2.3.7)[38C214C0-83C8-3594-8A4C-DC6AC3FEC163]@0xff ffff7fa62e7000
                dependency: com.apple.iokit.IOPCIFamily(2.7.3)[1D668879-BEF8-3C58-ABFE-FAC6B3E9A292]@0xffff ff7fa6266000
                dependency: com.apple.iokit.IOGraphicsFamily(2.3.7)[74E3E50F-E50A-3073-8C96-06F854292A91]@0 xffffff7fa62a4000
    BSD process name corresponding to current thread: WindowServer
    Mac OS version:
    12D78
    Kernel version:
    Darwin Kernel Version 12.3.0: Sun Jan  6 22:37:10 PST 2013; root:xnu-2050.22.13~1/RELEASE_X86_64
    Kernel UUID: 3EB7D8A7-C2D3-32EC-80F4-AB37D61492C6
    Kernel slide:     0x0000000025a00000
    Kernel text base: 0xffffff8025c00000
    System model name: MacBookPro9,1 (Mac-4B7AC7E43945597E)
    System uptime in nanoseconds: 187720354206
    last loaded kext at 185678984299: com.apple.driver.AudioAUUC          1.60 (addr 0xffffff7fa768f000, size 32768)
    loaded kexts:
    com.kaspersky.nke          1.0.1d41
    com.kaspersky.kext.klif          3.0.0d23
    com.apple.driver.AudioAUUC          1.60
    com.apple.iokit.IOBluetoothSerialManager          4.1.3f3
    com.apple.filesystems.autofs          3.0
    com.apple.driver.AGPM          100.12.87
    com.apple.driver.ApplePlatformEnabler          2.0.6d1
    com.apple.driver.X86PlatformShim          1.0.0
    com.apple.driver.AppleMikeyHIDDriver          122
    com.apple.driver.AppleHDAHardwareConfigDriver          2.3.7fc4
    com.apple.driver.AppleHDA          2.3.7fc4
    com.apple.GeForce          8.1.0
    com.apple.iokit.IOBluetoothUSBDFU          4.1.3f3
    com.apple.driver.AppleUpstreamUserClient          3.5.10
    com.apple.driver.ACPI_SMC_PlatformPlugin          1.0.0
    com.apple.iokit.BroadcomBluetoothHCIControllerUSBTransport          4.1.3f3
    com.apple.driver.AppleMikeyDriver          2.3.7fc4
    com.apple.nvidia.NVDAStartup          8.1.0
    com.apple.driver.SMCMotionSensor          3.0.3d1
    com.apple.driver.AppleSMCLMU          2.0.3d0
    com.apple.driver.AppleIntelHD4000Graphics          8.1.0
    com.apple.driver.AppleIntelFramebufferCapri          8.1.0
    com.apple.iokit.IOUserEthernet          1.0.0d1
    com.apple.Dont_Steal_Mac_OS_X          7.0.0
    com.apple.driver.ApplePolicyControl          3.3.0
    com.apple.driver.AppleSMCPDRC          1.0.0
    com.apple.driver.AppleLPC          1.6.0
    com.apple.driver.AppleMuxControl          3.3.0
    com.apple.driver.AppleBacklight          170.2.5
    com.apple.driver.AppleMCCSControl          1.1.11
    com.apple.driver.AppleUSBTCButtons          237.1
    com.apple.driver.AppleIRController          320.15
    com.apple.driver.AppleUSBTCKeyEventDriver          237.1
    com.apple.driver.AppleUSBTCKeyboard          237.1
    com.apple.driver.AppleFileSystemDriver          3.0.1
    com.apple.AppleFSCompression.AppleFSCompressionTypeDataless          1.0.0d1
    com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
    com.apple.BootCache          34
    com.apple.iokit.SCSITaskUserClient          3.5.5
    com.apple.driver.XsanFilter          404
    com.apple.iokit.IOAHCIBlockStorage          2.3.1
    com.apple.driver.AppleUSBHub          5.5.5
    com.apple.driver.AppleSDXC          1.4.0
    com.apple.iokit.AppleBCM5701Ethernet          3.6.0b1
    com.apple.driver.AirPort.Brcm4331          614.20.16
    com.apple.driver.AppleFWOHCI          4.9.6
    com.apple.driver.AppleAHCIPort          2.5.1
    com.apple.driver.AppleUSBEHCI          5.5.0
    com.apple.driver.AppleUSBXHCI          5.5.5
    com.apple.driver.AppleEFINVRAM          1.7
    com.apple.driver.AppleSmartBatteryManager          161.0.0
    com.apple.driver.AppleACPIButtons          1.7
    com.apple.driver.AppleRTC          1.5
    com.apple.driver.AppleHPET          1.8
    com.apple.driver.AppleSMBIOS          1.9
    com.apple.driver.AppleACPIEC          1.7
    com.apple.driver.AppleAPIC          1.6
    com.apple.driver.AppleIntelCPUPowerManagementClient          196.0.0
    com.apple.nke.applicationfirewall          4.0.39
    com.apple.security.quarantine          2
    com.apple.driver.AppleIntelCPUPowerManagement          196.0.0
    com.apple.iokit.IOSerialFamily          10.0.6
    com.apple.kext.triggers          1.0
    com.apple.driver.DspFuncLib          2.3.7fc4
    com.apple.iokit.IOAudioFamily          1.8.9fc11
    com.apple.kext.OSvKernDSPLib          1.6
    com.apple.nvidia.gk100hal          8.1.0
    com.apple.NVDAResman          8.1.0
    com.apple.iokit.IOFireWireIP          2.2.5
    com.apple.driver.IOPlatformPluginLegacy          1.0.0
    com.apple.iokit.AppleBluetoothHCIControllerUSBTransport          4.1.3f3
    com.apple.driver.AppleThunderboltEDMSink          1.1.8
    com.apple.driver.AppleThunderboltEDMSource          1.1.8
    com.apple.driver.AppleThunderboltDPOutAdapter          1.8.9
    com.apple.driver.X86PlatformPlugin          1.0.0
    com.apple.driver.AppleHDAController          2.3.7fc4
    com.apple.iokit.IOHDAFamily          2.3.7fc4
    com.apple.iokit.IOAcceleratorFamily          30.14
    com.apple.iokit.IOSurface          86.0.4
    com.apple.iokit.IOBluetoothFamily          4.1.3f3
    com.apple.driver.AppleSMC          3.1.4d2
    com.apple.driver.IOPlatformPluginFamily          5.3.0d51
    com.apple.driver.AppleSMBusPCI          1.0.11d0
    com.apple.driver.AppleGraphicsControl          3.3.0
    com.apple.driver.AppleBacklightExpert          1.0.4
    com.apple.iokit.IONDRVSupport          2.3.7
    com.apple.driver.AppleSMBusController          1.0.11d0
    com.apple.iokit.IOGraphicsFamily          2.3.7
    com.apple.driver.AppleThunderboltDPInAdapter          1.8.9
    com.apple.driver.AppleThunderboltDPAdapterFamily          1.8.9
    com.apple.driver.AppleThunderboltPCIDownAdapter          1.2.6
    com.apple.driver.AppleUSBMultitouch          237.3
    com.apple.iokit.IOUSBHIDDriver          5.2.5
    com.apple.driver.AppleUSBMergeNub          5.5.5
    com.apple.driver.AppleUSBComposite          5.2.5
    com.apple.iokit.IOSCSIMultimediaCommandsDevice          3.5.5
    com.apple.iokit.IOBDStorageFamily          1.7
    com.apple.iokit.IODVDStorageFamily          1.7.1
    com.apple.iokit.IOCDStorageFamily          1.7.1
    com.apple.iokit.IOAHCISerialATAPI          2.5.1
    com.apple.iokit.IOSCSIArchitectureModelFamily          3.5.5
    com.apple.driver.AppleThunderboltNHI          1.6.3
    com.apple.iokit.IOThunderboltFamily          2.2.6
    com.apple.iokit.IOUSBUserClient          5.5.5
    com.apple.iokit.IOEthernetAVBController          1.0.2b1
    com.apple.iokit.IO80211Family          522.4
    com.apple.iokit.IONetworkingFamily          3.0
    com.apple.iokit.IOFireWireFamily          4.5.5
    com.apple.iokit.IOAHCIFamily          2.3.1
    com.apple.iokit.IOUSBFamily          5.5.5
    com.apple.driver.AppleEFIRuntime          1.7
    com.apple.iokit.IOHIDFamily          1.8.1
    com.apple.iokit.IOSMBusFamily          1.1
    com.apple.security.sandbox          220.2
    com.apple.kext.AppleMatch          1.0.0d1
    com.apple.security.TMSafetyNet          7
    com.apple.driver.DiskImages          345
    com.apple.iokit.IOStorageFamily          1.8
    com.apple.driver.AppleKeyStore          28.21
    com.apple.driver.AppleACPIPlatform          1.7
    com.apple.iokit.IOPCIFamily          2.7.3
    com.apple.iokit.IOACPIFamily          1.4
    com.apple.kec.corecrypto          1.0
    System Profile:
    Model: MacBookPro9,1, BootROM MBP91.00D3.B08, 4 processors, Intel Core i7, 2.6 GHz, 16 GB, SMC 2.1f173
    Graphics: Intel HD Graphics 4000, Intel HD Graphics 4000, Built-In, 384 MB
    Graphics: NVIDIA GeForce GT 650M, NVIDIA GeForce GT 650M, PCIe, 1024 MB
    Memory Module: BANK 0/DIMM0, 8 GB, DDR3, 1600 MHz, 0x0000, 0x4B4238475F44335F534F31363030434C3130
    Memory Module: BANK 1/DIMM0, 8 GB, DDR3, 1600 MHz, 0x0000, 0x4B4238475F44335F534F31363030434C3130
    AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xF5), Broadcom BCM43xx 1.0 (5.106.98.100.16)
    Bluetooth: Version 4.1.3f3 11349, 2 service, 11 devices, 1 incoming serial ports
    Network Service: Ethernet, Ethernet, en0
    Serial ATA Device: APPLE HDD TOSHIBA MK7559GSXF, 750.16 GB
    Serial ATA Device: HL-DT-ST DVDRW  GS31N
    USB Device: hub_device, 0x8087  (Intel Corporation), 0x0024, 0x1a100000 / 2
    USB Device: FaceTime HD Camera (Built-in), apple_vendor_id, 0x8509, 0x1a110000 / 3
    USB Device: hub_device, 0x8087  (Intel Corporation), 0x0024, 0x1d100000 / 2
    USB Device: hub_device, 0x0424  (SMSC), 0x2513, 0x1d180000 / 3
    USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0252, 0x1d183000 / 6
    USB Device: IR Receiver, apple_vendor_id, 0x8242, 0x1d182000 / 5
    USB Device: BRCM20702 Hub, 0x0a5c  (Broadcom Corp.), 0x4500, 0x1d181000 / 4
    USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x821d, 0x1d181300 / 8
    Model: MacBookPro9,1, BootROM MBP91.00D3.B08, 4 processors, Intel Core i7, 2.6 GHz, 16 GB, SMC 2.1f173
    Graphics: Intel HD Graphics 4000, Intel HD Graphics 4000, Built-In, 384 MB
    Graphics: NVIDIA GeForce GT 650M, NVIDIA GeForce GT 650M, PCIe, 1024 MB
    Memory Module: BANK 0/DIMM0, 8 GB, DDR3, 1600 MHz, 0x0000, 0x4B4238475F44335F534F31363030434C3130
    Memory Module: BANK 1/DIMM0, 8 GB, DDR3, 1600 MHz, 0x0000, 0x4B4238475F44335F534F31363030434C3130
    AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xF5), Broadcom BCM43xx 1.0 (5.106.98.100.16)
    Bluetooth: Version 4.1.3f3 11349, 2 service, 11 devices, 1 incoming serial ports
    Network Service: Ethernet, Ethernet, en0
    Serial ATA Device: APPLE HDD TOSHIBA MK7559GSXF, 750.16 GB
    Serial ATA Device: HL-DT-ST DVDRW  GS31N
    USB Device: hub_device, 0x8087  (Intel Corporation), 0x0024, 0x1a100000 / 2
    USB Device: FaceTime HD Camera (Built-in), apple_vendor_id, 0x8509, 0x1a110000 / 3
    USB Device: hub_device, 0x8087  (Intel Corporation), 0x0024, 0x1d100000 / 2
    USB Device: hub_device, 0x0424  (SMSC), 0x2513, 0x1d180000 / 3
    USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0252, 0x1d183000 / 6
    USB Device: IR Receiver, apple_vendor_id, 0x8242, 0x1d182000 / 5
    USB Device: BRCM20702 Hub, 0x0a5c  (Broadcom Corp.), 0x4500, 0x1d181000 / 4
    USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x821d, 0x1d181300 / 8

    1. This comment applies to malicious software ("malware") that's installed unwittingly by the victim of a network attack. It does not apply to software, such as keystroke loggers, that may be installed deliberately by an intruder who has hands-on access to the victim's computer. That threat is in a different category, and there's no easy way to defend against it. If you have reason to suspect that you're the target of such an attack, you need expert help.
    OS X now implements three layers of built-in protection specifically against malware, not counting runtime protections such as execute disable, sandboxing, system library randomization, and address space layout randomization that may also guard against other kinds of exploits.
    2. All versions of OS X since 10.6.7 have been able to detect known Mac malware in downloaded files, and to block insecure web plugins. This feature is transparent to the user, but internally Apple calls it "XProtect." The malware recognition database is automatically checked for updates once a day; however, you shouldn't rely on it, because the attackers are always at least a day ahead of the defenders.
    The following caveats apply to XProtect:
    It can be bypassed by some third-party networking software, such as BitTorrent clients and Java applets.
    It only applies to software downloaded from the network. Software installed from a CD or other media is not checked.
    3. Starting with OS X 10.7.5, there has been a second layer of built-in malware protection, designated "Gatekeeper" by Apple. By default, applications and Installer packages downloaded from the network will only run if they're digitally signed by a developer with a certificate issued by Apple. Software certified in this way hasn't necessarily been tested by Apple, but you can be reasonably sure that it hasn't been modified by anyone other than the developer. His identity is known to Apple, so he could be held legally responsible if he distributed malware. That may not mean much if the developer lives in a country with a weak legal system (see below.)
    Gatekeeper doesn't depend on a database of known malware. It has, however, the same limitations as XProtect, and in addition the following:
    It can easily be disabled or overridden by the user.
    A malware attacker could get control of a code-signing certificate under false pretenses, or could find some other way to bypass Apple's oversight, or the oversight could fail in a particular case due to human error.
    For most purposes, applications recognized by Gatekeeper as signed, including App Store products, can be considered safe. Note, however, that at least one trojan for iOS (not for OS X) was briefly distributed by a developer in Russia through the iTunes App Store. That store is under the same oversight by Apple as the Mac App Store, so the protection shouldn't be considered absolute. App Store products may prompt for access to private data, such as your contacts. Think before granting that access. OS X security is based on user input. Never click anything reflexively.
    4. Starting with OS X 10.8.3, a third layer of protection has been added: a "Malware Removal Tool" (MRT). MRT runs automatically in the background when you update the OS. It checks for, and removes, malware that may have evaded the other protections via a Java exploit (see below.) MRT also runs when you install or update the Apple-supplied Java runtime (but not the Oracle runtime.) Like XProtect, MRT is presumably effective against known attacks, but maybe not against unknown attacks. It notifies you if it finds malware, but otherwise there's no user interface to MRT.
    5. Beyond XProtect, Gatekeeper, and MRT, there’s no evidence of any benefit from other automated protection against malware. The first and best line of defense is always your own intelligence. With the possible exception of Java exploits, all known malware circulating on the Internet that affects a fully-updated installation of OS X 10.6 or later takes the form of so-called "trojan horses," which can only have an effect if the victim is duped into running them. The threat therefore amounts to a battle of wits between you and the malware attacker. If you're smarter than he thinks you are, you'll win.
    That means, in practice, that you never use software that comes from an untrustworthy source, or that does something inherently untrustworthy. How do you know what is trustworthy?
    Any website that prompts you to install a “codec,” “plug-in,” "player," "extractor," or “certificate” that comes from that same site, or an unknown one, is untrustworthy.
    A web operator who tells you that you have a “virus,” or that anything else is wrong with your computer, or that you have won a prize in a contest you never entered, is trying to commit a crime with you as the victim. (Some reputable websites did legitimately warn visitors who were infected with the "DNSChanger" malware. That exception to this rule no longer applies.)
    Pirated copies or "cracks" of commercial software, no matter where they come from, are unsafe.
    Software of any kind downloaded from a BitTorrent or from a Usenet binary newsgroup is unsafe.
    Software that purports to help you do something that's illegal or that infringes copyright, such as saving streamed audio or video for reuse without permission, is unsafe. All YouTube "downloaders" are in this category, though not all are necessarily harmful.
    Software with a corporate brand, such as Adobe Flash Player, must be downloaded directly from the developer’s website. If it comes from any other source, it's unsafe.
    Even signed applications should not be trusted if they do something unexpected, such as asking for permission to access your contacts or your location for no apparent reason.
    6. Java on the Web (not to be confused with JavaScript, to which it's not related, despite the similarity of the names) is a weak point in the security of any system. Java is, among other things, a platform for running complex applications in a web page, on the client. That was always a bad idea, and Java's developers have proven themselves incapable of implementing it without also creating a portal for malware to enter. Past Java exploits are the closest thing there has ever been to a Windows-style virus affecting OS X. Merely loading a page with malicious Java content could be harmful.
    Fortunately, client-side Java on the Web is obsolete and mostly extinct. Only a few outmoded sites still use it. Try to hasten the process of extinction by avoiding those sites, if you have a choice. Forget about playing games or other non-essential uses of Java.
    Java is not included in OS X 10.7 and later. Discrete Java installers are distributed by Apple and by Oracle (the developer of Java.) Don't use either one unless you need it. Most people don't. If Java is installed, disable it — not JavaScript — in your browsers.
    Regardless of version, experience has shown that Java on the Web can't be trusted. If you must use a Java applet for a task on a specific site, enable Java only for that site in Safari. Never enable Java for a public website that carries third-party advertising. Use it only on well-known, login-protected, secure websites without ads. In Safari 6 or later, you'll see a lock icon in the address bar with the abbreviation "https" when visiting a secure site.
    Follow the above guidelines, and you’ll be as safe from malware as you can practically be. The rest of this comment concerns what you should not do to protect yourself from malware.
    7. Never install any commercial "anti-virus" or "Internet security" products for the Mac, as they all do more harm than good, if they do any good at all. If you need to be able to detect Windows malware in your files, use the free software  ClamXav — nothing else.
    Why shouldn't you use commercial "anti-virus" products?
    Their design is predicated on the nonexistent threat that malware may be injected at any time, anywhere in the file system. Malware is downloaded from the network; it doesn't materialize from nowhere.
    In order to meet that nonexistent threat, the software modifies or duplicates low-level functions of the operating system, which is a waste of resources and a common cause of instability, bugs, and poor performance.
    By modifying the operating system, the software itself may create weaknesses that could be exploited by malware attackers.
    8. ClamXav doesn't have these drawbacks. That doesn't mean it's entirely safe. It may report email messages that have "phishing" links in the body, or Windows malware in attachments, as infected files, and offer to delete or move them. Doing so will corrupt the Mail database. The messages should be deleted from within the Mail application.
    ClamXav is not needed, and should not be relied upon, for protection against OS X malware. It's useful only for detecting Windows malware. Windows malware can't harm you directly (unless, of course, you use Windows.) Just don't pass it on to anyone else.
    A Windows malware attachment in email is usually easy to recognize. The file name will often be targeted at people who aren't very bright; for example:
    ♥♥♥♥♥♥♥♥♥♥♥♥♥♥!!!!!!!H0TBABEZ4U!!!!!!!.AVI♥♥♥♥♥♥♥♥♥♥♥♥♥♥.exe
    ClamXav may be able to tell you which particular virus or trojan it is, but do you care? In practice, there's seldom a reason to use ClamXav unless a network administrator requires you to run an anti-virus application.
    9. The greatest harm done by security software, in my opinion, is in its effect on human behavior. It does little or nothing to protect people from emerging threats, but if they get a false sense of security from it, they may feel free to do things that expose them to higher risk. Nothing can lessen the need for safe computing practices.
    10. It seems to be a common belief that the built-in Application Firewall acts as a barrier to infection, or prevents malware from functioning. It does neither. It blocks inbound connections to certain network services you're running, such as file sharing. It's disabled by default and you should leave it that way if you're behind a router on a private home or office network. Activate it only when you're on an untrusted network, for instance a public Wi-Fi hotspot, where you don't want to provide services. Disable any services you don't use in the Sharing preference pane. All are disabled by default.

  • Total lock-ups with fan running - translate system.log file please!?

    Hi, all. My late 2005 2.3 gig dual G5 has been experiencing random lock ups for as long as I can remember. My system is up to date and I have tested each pair of the 5 gigs of ram that I have and the system freezes with each pair. It can happen at any time, when I am doing absolutely nothing, for example, overnight. I am at my wits end!
    Here's the system log file for the latest freezes. Can anyone tell me what's going on here??? I really need to get to the root of this problem. Thanks so so much in advance.
    Apr 12 17:32:52 Marc-Weinbergs-Computer kernel[0]: AFP_VFS afpfs_Reconnect: connect on /Volumes/Macintosh HD failed 89.
    Apr 12 17:32:52 Marc-Weinbergs-Computer kernel[0]: AFP_VFS afpfs_unmount: /Volumes/Macintosh HD, flags 524288, pid 62
    Apr 12 17:44:46 Marc-Weinbergs-Computer /Library/Application Support/FLEXnet Publisher/Service/11.03.005/FNPLicensingService: Started\n
    Apr 12 17:44:46 Marc-Weinbergs-Computer /Library/Application Support/FLEXnet Publisher/Service/11.03.005/FNPLicensingService: This service performs licensing functions on behalf of FLEXnet enabled products.\n
    Apr 12 18:01:06 Marc-Weinbergs-Computer KernelEventAgent[62]: tid 00000000 received unknown event (256)
    Apr 12 18:01:49 Marc-Weinbergs-Computer KernelEventAgent[62]: tid 00000000 received unknown event (256)
    Apr 12 18:08:29 Marc-Weinbergs-Computer diskarbitrationd[69]: SDCopy [1056]:36091 not responding.
    Apr 12 18:16:18 Marc-Weinbergs-Computer KernelEventAgent[62]: tid 00000000 received unknown event (256)
    Apr 12 18:16:53 Marc-Weinbergs-Computer KernelEventAgent[62]: tid 00000000 received unknown event (256)
    Apr 12 19:24:12 Marc-Weinbergs-Computer ntpd[191]: time reset -0.650307 s
    Apr 13 01:05:45 Marc-Weinbergs-Computer ntpd[191]: time reset -0.496917 s
    Apr 13 03:15:03 Marc-Weinbergs-Computer cp: error processing extended attributes: Operation not permitted
    Apr 13 07:15:03 Marc-Weinbergs-Computer postfix/postqueue[1778]: warning: Mail system is down -- accessing queue directly
    Apr 13 03:15:03 Marc-Weinbergs-Computer cp: error processing extended attributes: Operation not permitted
    Apr 13 15:53:53 Marc-Weinbergs-Computer KernelEventAgent[62]: tid 00000000 received unknown event (256)
    Apr 13 15:53:54 Marc-Weinbergs-Computer KernelEventAgent[62]: tid 00000000 received unknown event (256)
    Apr 13 22:15:48 localhost kernel[0]: standard timeslicing quantum is 10000 us
    Apr 13 22:15:47 localhost mDNSResponder-108.6 (Jul 19 2007 11: 33:32)[63]: starting
    Apr 13 22:15:48 localhost kernel[0]: vmpagebootstrap: 506550 free pages
    Apr 13 22:15:47 localhost memberd[70]: memberd starting up
    Apr 13 22:15:49 localhost kernel[0]: migtable_maxdispl = 70
    Apr 13 22:15:49 localhost kernel[0]: Added extension "com.firmtek.driver.FTATASil3132E" from archive.
    Apr 13 22:15:49 localhost kernel[0]: Added extension "com.firmtek.driver.Sil3112DeviceNub" from archive.
    Apr 13 22:15:49 localhost kernel[0]: Copyright (c) 1982, 1986, 1989, 1991, 1993
    Apr 13 22:15:49 localhost kernel[0]: The Regents of the University of California. All rights reserved.
    Apr 13 22:15:49 localhost kernel[0]: using 5242 buffer headers and 4096 cluster IO buffer headers
    Apr 13 22:15:49 localhost kernel[0]: AppleKauaiATA shasta-ata features enabled
    Apr 13 22:15:49 localhost kernel[0]: DART enabled
    Apr 13 22:15:47 localhost DirectoryService[75]: Launched version 2.1 (v353.6)
    Apr 13 22:15:49 localhost kernel[0]: FireWire (OHCI) Apple ID 52 built-in now active, GUID 001451ff fe1b4c7e; max speed s800.
    Apr 13 22:15:49 localhost kernel[0]: USBF: 20.590 OHCI driver: OHCIRootHubPortPower bit not sticking (1). Retrying.
    Apr 13 22:15:49 localhost kernel[0]: USBF: 20.590 OHCI driver: OHCIRootHubPortPower bit not sticking (1). Retrying.
    Apr 13 22:15:49 localhost kernel[0]: USBF: 20.590 OHCI driver: OHCIRootHubPortPower bit not sticking (1). Retrying.
    Apr 13 22:15:49 localhost kernel[0]: USBF: 20.590 OHCI driver: OHCIRootHubPortPower bit not sticking (1). Retrying.
    Apr 13 22:15:49 localhost kernel[0]: USBF: 20.590 OHCI driver: OHCIRootHubPortPower bit not sticking (1). Retrying.
    Apr 13 22:15:49 localhost kernel[0]: USBF: 20.590 OHCI driver: OHCIRootHubPortPower bit not sticking (1). Retrying.
    Apr 13 22:15:49 localhost kernel[0]: USBF: 20.590 OHCI driver: OHCIRootHubPortPower bit not sticking (1). Retrying.
    Apr 13 22:15:49 localhost kernel[0]: USBF: 20.590 OHCI driver: OHCIRootHubPortPower bit not sticking (1). Retrying.
    Apr 13 22:15:49 localhost kernel[0]: USBF: 20.590 OHCI driver: OHCIRootHubPortPower bit not sticking (1). Retrying.
    Apr 13 22:15:48 localhost lookupd[71]: lookupd (version 369.5) starting - Sun Apr 13 22:15:48 2008
    Apr 13 22:15:49 localhost kernel[0]: USBF: 20.590 OHCI driver: OHCIRootHubPortPower bit not sticking (1). Retrying.
    Apr 13 22:15:49 localhost kernel[0]: Extension "com.microsoft.driver.MicrosoftKeyboardUSB" has no kernel dependency.
    Apr 13 22:15:49 localhost kernel[0]: AppleSMUparent::clientNotifyData nobody registed for 0x40
    Apr 13 22:15:49 localhost kernel[0]: Security auditing service present
    Apr 13 22:15:49 localhost kernel[0]: BSM auditing present
    Apr 13 22:15:49 localhost kernel[0]: disabled
    Apr 13 22:15:49 localhost kernel[0]: rooting via boot-uuid from /chosen: 82827EDF-0263-3B93-BEED-4B114E820B85
    Apr 13 22:15:49 localhost kernel[0]: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
    Apr 13 22:15:49 localhost kernel[0]: Got boot device = IOService:/MacRISC4PE/ht@0,f2000000/AppleMacRiscHT/pci@9/IOPCI2PCIBridge/k2-sat a-root@C/AppleK2SATARoot/k2-sata@0/AppleK2SATA/ATADeviceNub@0/IOATABlockStorageD river/IOATABlockStorageDevice/IOBlockStorageDriver/ST3320620AS Media/IOApplePartitionScheme/AppleHFS_Untitled1@10
    Apr 13 22:15:49 localhost kernel[0]: BSD root: disk0s10, major 14, minor 12
    Apr 13 22:15:49 localhost kernel[0]: jnl: replay_journal: from: 8451584 to: 11420160 (joffset 0x952000)
    Apr 13 22:15:50 localhost kernel[0]: AppleSMU -- shutdown cause = 3
    Apr 13 22:15:50 localhost kernel[0]: AppleSMU::PMU vers = 0x000d00a0, SPU vers = 0x67, SDB vers = 0x01,
    Apr 13 22:15:50 localhost kernel[0]: HFS: Removed 8 orphaned unlinked files
    Apr 13 22:15:50 localhost kernel[0]: Jettisoning kernel linker.
    Apr 13 22:15:50 localhost kernel[0]: Resetting IOCatalogue.
    Apr 13 22:15:50 localhost kernel[0]: Matching service count = 1
    Apr 13 22:15:50 localhost kernel[0]: Matching service count = 1
    Apr 13 22:15:50 localhost kernel[0]: Matching service count = 1
    Apr 13 22:15:50 localhost kernel[0]: Matching service count = 1
    Apr 13 22:15:50 localhost kernel[0]: Matching service count = 1
    Apr 13 22:15:50 localhost kernel[0]: Matching service count = 3
    Apr 13 22:15:50 localhost kernel[0]: NVDANV40HAL loaded and registered.
    Apr 13 22:15:50 localhost kernel[0]: PowerMac112ThermalProfile::start 1
    Apr 13 22:15:50 localhost kernel[0]: PowerMac112ThermalProfile::end 1
    Apr 13 22:15:50 localhost kernel[0]: SMUNeo2PlatformPlugin::initThermalProfile - entry
    Apr 13 22:15:50 localhost kernel[0]: SMUNeo2PlatformPlugin::initThermalProfile - calling adjust
    Apr 13 22:15:50 localhost kernel[0]: PowerMac112ThermalProfile::adjustThermalProfile start
    Apr 13 22:15:50 localhost kernel[0]: IPv6 packet filtering initialized, default to accept, logging disabled
    Apr 13 22:15:50 localhost kernel[0]: BCM5701Enet: Ethernet address 00:14:51:61:ee:78
    Apr 13 22:15:50 localhost kernel[0]: BCM5701Enet: Ethernet address 00:14:51:61:ee:79
    Apr 13 22:15:51 localhost lookupd[86]: lookupd (version 369.5) starting - Sun Apr 13 22:15:51 2008
    Apr 13 22:15:51 localhost kernel[0]: jnl: replay_journal: from: 21611008 to: 7857152 (joffset 0x952000)
    Apr 13 22:15:51 localhost kernel[0]: jnl: replay_journal: from: 673280 to: 24382976 (joffset 0x952000)
    Apr 13 22:15:51 localhost kernel[0]: jnl: replay_journal: from: 3890176 to: 6294016 (joffset 0x7d01000)
    Apr 13 22:15:51 localhost diskarbitrationd[69]: disk0s10 hfs 82827EDF-0263-3B93-BEED-4B114E820B85 NewestSeagate /
    Apr 13 22:15:52 localhost kernel[0]: NVDA,Display-A: vram [90020000:10000000]
    Apr 13 22:15:52 localhost mDNSResponder: Adding browse domain local.
    Apr 13 22:15:53 localhost kernel[0]: hfs mount: enabling extended security on Maxtor
    Apr 13 22:15:53 localhost diskarbitrationd[69]: disk1s3 hfs 0DBE2113-B1F5-388F-BF70-2E366A095330 Maxtor /Volumes/Maxtor
    Apr 13 22:15:54 localhost kernel[0]: NVDA,Display-B: vram [94000000:08000000]
    Apr 13 22:15:54 Marc-Weinbergs-Computer configd[67]: setting hostname to "Marc-Weinbergs-Computer.local"
    Apr 13 22:15:54 Marc-Weinbergs-Computer /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow: Login Window Application Started
    Apr 13 22:15:56 Marc-Weinbergs-Computer diskarbitrationd[69]: disk2s3 hfs 971CABB3-C211-38FC-8E91-6B4F8EA5FA20 B08-09-07 /Volumes/B08-09-07
    Apr 13 22:15:56 Marc-Weinbergs-Computer loginwindow[110]: Login Window Started Security Agent
    Apr 13 22:15:57 Marc-Weinbergs-Computer kernel[0]: AppleBCM5701Ethernet - en1 link active, 1000-Mbit, full duplex, symmetric flow control enabled
    Apr 13 22:15:57 Marc-Weinbergs-Computer configd[67]: AppleTalk startup
    Apr 13 22:15:57 Marc-Weinbergs-Computer TabletDriver[119]: #### GetFrontProcess failed to get front process (-600)
    Apr 13 22:15:59 Marc-Weinbergs-Computer configd[67]: posting notification com.apple.system.config.network_change
    Apr 13 22:16:00 Marc-Weinbergs-Computer configd[67]: posting notification com.apple.system.config.network_change
    Apr 13 22:16:00 Marc-Weinbergs-Computer configd[67]: executing /System/Library/SystemConfiguration/Kicker.bundle/Contents/Resources/enable-net work
    Apr 13 22:16:00 Marc-Weinbergs-Computer configd[67]: posting notification com.apple.system.config.network_change
    Apr 13 22:16:01 Marc-Weinbergs-Computer lookupd[123]: lookupd (version 369.5) starting - Sun Apr 13 22:16:01 2008
    Apr 13 22:16:01 Marc-Weinbergs-Computer kernel[0]: HFS: Removed 2 orphaned unlinked files
    Apr 13 22:16:01 Marc-Weinbergs-Computer diskarbitrationd[69]: disk3s3 hfs CDA8BCC5-0CE4-33E8-A910-4B0952DBC230 FullBU-09-07 /Volumes/FullBU-09-07
    Apr 13 22:16:04 Marc-Weinbergs-Computer configd[67]: target=enable-network: disabled
    Apr 13 22:16:05 Marc-Weinbergs-Computer configd[67]: AppleTalk startup complete
    Apr 13 22:16:09 Marc-Weinbergs-Computer TabletDriver[237]: #### GetFrontProcess failed to get front process (-600)
    Apr 13 22:16:09 Marc-Weinbergs-Computer launchd[241]: com.wacom.wacomtablet: exited with exit code: 253
    Apr 13 22:16:09 Marc-Weinbergs-Computer launchd[241]: com.wacom.wacomtablet: 9 more failures without living at least 60 seconds will cause job removal
    Apr 13 22:16:29 Marc-Weinbergs-Computer /Applications/DiskWarrior.app/Contents/MacOS/DiskWarriorDaemon: [Sun Apr 13 22:16:28 EDT 2008] : ATA device 'ST3320620AS', serial number '6QF0L6LR', reports it is functioning at a temperature of 95.0F (35C) degrees.
    Apr 13 22:16:29 Marc-Weinbergs-Computer /Applications/DiskWarrior.app/Contents/MacOS/DiskWarriorDaemon: [Sun Apr 13 22:16:28 EDT 2008] : Spare blocks for ATA device 'ST3320620AS', serial number '6QF0L6LR', appear to still be available. (Total Available: 36) (Use Attempts: 0)
    Apr 13 22:16:29 Marc-Weinbergs-Computer /Applications/DiskWarrior.app/Contents/MacOS/DiskWarriorDaemon: [Sun Apr 13 22:16:29 EDT 2008] : ATA device 'ST3320620AS', serial number '6QF0LGS4', reports it is functioning at a temperature of 100.4F (38C) degrees.
    Apr 13 22:16:29 Marc-Weinbergs-Computer /Applications/DiskWarrior.app/Contents/MacOS/DiskWarriorDaemon: [Sun Apr 13 22:16:29 EDT 2008] : Spare blocks for ATA device 'ST3320620AS', serial number '6QF0LGS4', appear to still be available. (Total Available: 36) (Use Attempts: 0)
    Apr 13 22:16:29 Marc-Weinbergs-Computer /Applications/DiskWarrior.app/Contents/MacOS/DiskWarriorDaemon: [Sun Apr 13 22:16:29 EDT 2008] : ATA device 'ST3320620AS', serial number '9RV000FC', reports it is functioning at a temperature of 95.0F (35C) degrees.
    Apr 13 22:16:29 Marc-Weinbergs-Computer /Applications/DiskWarrior.app/Contents/MacOS/DiskWarriorDaemon: [Sun Apr 13 22:16:29 EDT 2008] : Spare blocks for ATA device 'ST3320620AS', serial number '9RV000FC', appear to still be available. (Total Available: 36) (Use Attempts: 0)
    Apr 13 22:16:29 Marc-Weinbergs-Computer /Applications/DiskWarrior.app/Contents/MacOS/DiskWarriorDaemon: [Sun Apr 13 22:16:29 EDT 2008] : ATA device 'Maxtor 6B300S0', serial number 'B6211G0H', reports it is functioning at a temperature of 89.6F (32C) degrees.
    Apr 13 22:16:29 Marc-Weinbergs-Computer /Applications/DiskWarrior.app/Contents/MacOS/DiskWarriorDaemon: [Sun Apr 13 22:16:29 EDT 2008] : Spare blocks for ATA device 'Maxtor 6B300S0', serial number 'B6211G0H', appear to still be available. (Total Available: 63) (Use Attempts: 0)
    Apr 13 22:16:54 Marc-Weinbergs-Computer /System/Library/CoreServices/Finder.app/Contents/MacOS/Finder: _TIFFVSetField: tiff data provider: Invalid tag "Copyright" (not supported by codec).\n
    Apr 13 22:16:54 Marc-Weinbergs-Computer /System/Library/CoreServices/Finder.app/Contents/MacOS/Finder: _TIFFVSetField: tiff data provider: Invalid tag "Copyright" (not supported by codec).\n
    etc.

    Hi-
    The machine seems to be having trouble with loading certain drivers, but, as this isn't a crash log, and doesn't show the "hang-up" or freeze, it's hard to tell.
    Noted possibilities are:
    -Microsoft keyboard (possible USB power problem)
    -firmtek driver (from archive) questionable due to the "archive" annotation
    -Wacom tablet driver, causing system problems
    Running in Safe mode without freezes would help to determine if one of these drivers is the problem.
    Other possibilities are outdated drivers, or simply a need to reinstall the OS.
    If unnecessary, removing the driver(s) would be a good idea.
    External USB and Firewire devices are all suspect, should all be disconnected, revert to Apple keyboard, and test system performance. Adding one device at a time, and testing each will be necessary to clear each device.
    I have experienced system trouble when a Wacom tablet was not connected, but the driver was left installed.
    Disabling the driver from Startup items may be necessary to test without the Wacom tablet connected.

  • System lock-ups after upgrading to Tiger

    This topic was previously posted in 'Installation & Setup'.
    After 3 days (and 18 views) I got no replies.
    Maybe that forum was not appropriate, so I decided to try it in this forum.
    About 4 months ago I exchanged my 80 GB Hd in favor of an 200 GB Maxtor 6L200P0. One day later I upgraded OS X 10.3.9 to Tiger (retail DVD).
    At that time I experienced a frequent (several times a day) lock-up of my system.
    No messages, nothing, not even after powering down and restarting.
    After some time I figured out that the lock-ups occurred on Internet access. Clicking on a link in Safari, posting messages on Discussions. Even Mail locked the system a few times. Also Corripio (artwork and lyrics finder for iTunes) caused the system to lock.
    After that, I decided to perform an Archive & Install (first time after almost 4 years of using this Mac). Except from having to re-install a number of 3rd party apps. the system seemed to perform well. No lock-ups were experienced for a few weeks.
    Problem solved, I thought.
    Although far less frequent than before, I do experience those annoying lock-ups a few times a week.
    Here are my questions:
    What could be the cause of the lock-up?
    Is is advisable to perform a Clean Install? What advantage do I have of, it opposite to performing an A&I. I'm reluctant to perform a clean install at the moment, because I haven't found a few serials of commercial and shareware applications yet ( I know, I should have written them down :-/ )
    Any hints/tips to track down the exact cause?
    TIA
    M
    P.S. ( I do have a bootable complete backup of my HD on an Maxtor Onetouch II )

    Hi, M.
    1. You wrote: "What could be the cause of the lock-up?"The number of potential causes range from disk corruption or bad applications to serious hardware problems, such as a defective logic board.
    2. You wrote: "Any hints/tips to track down the exact cause?"I suggest treating the "lock up" problem — better described as a "freezes and hangs" problem — similar to a kernel panic as the basic troubleshooting and hardware testing steps are virtually the same. See my "Resolving Kernel Panics" FAQ.
    It provides a comprehensive roadmap which you should follow from beginning to end, in the order specified in the FAQ.
    2. You wrote: "Is is advisable to perform a Clean Install? What advantage do I have of, it opposite to performing an A&I."The term "Clean Install" does not apply in Mac OS X. That is obsolete Mac OS 9 terminology. The closest Mac OS X equivalent to a "Clean Install" is an Archive and Install with the Preserve User and Network Settings option, which it sounds like you've already tried once previously, but you may want to try again as part of the troubleshooting process I outlined above. See my "General advice on performing an Archive and Install" FAQ for some important tips on this process.
    The other options are:
    • Archive and Install without the Preserve User and Network Settings option: This reinstalls the OS and wipes out both your accounts and your network configuration, but preserves the previous System folder.
    • Erase and Install: Erases the hard drive, i.e. Macintosh HD, and reinstalls the OS from scratch, preserving nothing: your accounts, network settings, and everything else on the drive are deleted.
    Of those two, and since you have a bootable backup, the second (Erase and Install) would be the second-to-last thing you would try, the last being taking the machine in for service.
    Good luck!
    Dr. Smoke
    Author: Troubleshooting Mac® OS X
    Note: The information provided in the link(s) above is freely available. However, because I own The X Lab™, a commercial Web site to which some of these links point, the Apple Discussions Terms of Use require I include the following disclosure statement with this post:
    I may receive some form of compensation, financial or otherwise, from my recommendation or link.

  • Odd System Lock-Ups [XP-Pro SP3]

    Something odd is happening, on my normally, and otherwise stable laptop with XP-Pro SP3.
    I have observed that on Fridays, at about 11:30AM MST/USA, I get system lock-ups. Everything just freezes.
    I have poured over Event Viewer, and nothing is getting launched at about that time. Really nothing in System, or Applications, from about boot-up, other than my Browser (Chrome). Not one Warning, or Error, and little real activity.
    I cannot verify that this happens every Friday (do not remember it on Friday Jan. 13, for instance, but then the Adobe Forum Log-in went down), as I am often out of town. However, and based only on memory, this has now happened about 5 - 6 times, and always late in the morning, and on Fridays.
    Normally, I only have my Browser open, though this time also had Windows Explorer minimized. During this AM, I had PrPro, PrE and Photoshop open at times, but none was open, when the lock-up happened.
    I tend to suspect something is trying to update, but it's not showing in Event Viewer. A few times, there was a Norton Live Update Scan, but those were usually hours before. Those are not download/installs, as I have Live Update to full manual, and the same for all other such utilities.
    Does anyone have any ideas, or perhaps a monitoring utility, that will gather data, better than Event Viewer?
    TIA,
    Hunt

    hmm.... google.... i dont really trust google much....
    i used to have something ( i use xp ) that basically I had total control over when to connect to isp etc and disconnect... but for life of me cant remember what it was. that was years ago.
    now when i start computer it automatically ( partially this is due to isp of verizon ) connects and then gives me control of computer ( is part of boot and load process now ).
    your prob seems to be some kinda scheduled thing is why i was thinking maybe turn stuff ' off ' that might be trying to update or something under the radar ( is part of the system more or less.. components ...)
    this area
    you wont see this related stuff in event viewer type listings ... and gets kinda complicated to me at least.

  • BIOS lock-ups after upgrading bios to v1.8

    Hi,
    I have a K8N-Neo FSR motherboard with an AMD Athlon 64 3000+, 2x 512 MB DDR Memory, ATI Radeon 9600XT w/256 mb ram video card.
    It worked fine for about half a year now, but now I decided to upgrade my harddisk from a 160GB IDE hard drive to a 300GB S-ATA hard drive.
    Copying went fine, but I was not able to boot from the new hard drive, so I decided to upgrade the motherboard bios, hoping that that would solve the problem.
    After updating using live update, which went successful, the pc rebooted.
    I was able to go in the bios and check the hard disk settings, and everything seemed to be configured properly, so I did exit&save.
    After rebooting again, the bios got stuck at the boot logo though, and no response to keys or anything else.
    I tried clearing the bios, both with the jumper, and by removing the battery, but the problem remains.
    After lots of restarts, sometimes I get a little further where it shows the energy star logo.
    Sometimes I am able to get to the bios setup first screen (after which it locks up and I can't do anything)
    Other times I just see the first lines, and yet another time I see 'Memory testing'
    I can't boot from a floppy either, so I can't downgrade or reinstall the bios either.
    On the back panel, the right-bottom led lights up green mostly when it is locked up.
    Sometimes the left top led lights up red and the bottom left led lights up green.
    Anyone has an idea on how to solve this?
    Thanks!

    I had same issue for me the fix was to disconnect one of the SATA drives.   I am now having all kinds of issue, machine won't boot without 1 sata drive disconnected.   Was running fine last night on one drive, now machine is slow as christmas.   Takes 15 minutes to load a web page, start menu hangs when coming up for 3-4 minutes.   I was fine until the 1.8 BIOS upgrade.   I wondered if my motherboard went bad, but then I see three or four others having similar issues.   Can the motherboards be returned to MSI for a replacement?  While running version 1.8 I had the same issue seemed to boot OK on 1 stick of ram, but not both.   Once I flashed back to 1.7 now I can only run 1 harddrive.   What the !@#$@!# is going on.

  • BSOD / Lock-ups with new Q9550 in P965 Platinum

    MSI P965 Platinum Mobo
    E6700 CPU, recently upgraded to Q9550
    Zalman Cu heat sink + fan.
    4GB Corsair 6400 C4 (4-4-4-12 800 MHz)
    MSI 8800 GTX graphics
    Auzentech Meridian sound
    2 x 36GB Raptors RAID 0 (System)
    2 x 250 GB Western Digital Caviar WD2500KS RAID 0 (Data)
    Corsair HX620W PSU
    All drives attached to the ICH8R Intel RAID controller.
    BIOS: 1.8 (latest)
    Vista Ultimate 32 bit SP1 + latest patches
    Intel Matrix Storage Manager v8.6
    Hi all,
    I have run with the above hardware specification since Jan 2007 without experiencing any hardware problems at all. Two weeks ago I upgraded the CPU from an E6700 dual-core to a Q9550 quad. I was a little concerned about doing this, because the P965 supports a max FSB of 1066 and the Q9550 is rated at 1333. In any case, I Googled around and found that some flavours of the Q9550 had been tested on my mobo (http://www.cpu-upgrade.com/mb-MSI/P965_Platinum_(MS-238).html) and also MSI list the Q9550 stepping C1 as being compatible so I took the leap.
    Early indications were good - Vista detected the new chip and I rebooted when prompted. However, in the space of two weeks I have experienced  around one or two BSODs per day STOP 101 or 124 codes. Hmm!
    I have switched back to my trusty E6700 chip and the system is then as solid as a rock. I see 3 possibilities here:
    1.The Mobo website (MSI P965) lists the Q9550 stepping type C1 as being compatible. There is no mention of E0 or C0 which seem to be the other two variants. I have no idea which stepping type mine is as the product numbers for the Q9550 chips are all the same (EU80569PJ073N or BX80569Q9550) regardless of whether it is a C0, C1 or E0 stepping. Is there any way to tell which on I have - I tried with CPU-Z but didn't spot the stepping type? In any case, could this be the problem or am I off-base?
    2. It's possible I have a faulty chip. How likely is this do you think? I could ask for a swap with Novatech but could be back in the same boat, and they will reject the return unless it is 'proven faulty'.
    3. I need to mod the clocking on my rig to support the Q9550. If so, can anyone advise on what I should do?
    I doubt the problem is caused by an OS factor as I ran some tested in an XP pre-boot environmet and still got the lock-ups.
    What should I do? i don't really want to ebay the chip at say a £50 loss if i can help it.
    Many thanks in advance.

    Quote
    I have no idea which stepping type mine is as the product numbers for the Q9550 chips are all the same (EU80569PJ073N or BX80569Q9550) regardless of whether it is a C0, C1 or E0 stepping.
    No, the OEM Order Code is different, and the sSpec Number also.
    Have a look at these links
    Q9550=SLAWQ=C1--> http://processorfinder.intel.com/details.aspx?sSpec=SLAWQ
    Q9550=SLB8V=E0 --> http://processorfinder.intel.com/details.aspx?sSpec=SLB8V

  • P7n Dimaond Vista 64 bit lock-ups

    Hi, I'm experiencing random hard lock ups of my newly built Vista 64bit PC
    I've reinstalled the OS 3 times, i have all the latest drivers.
    I've ran memtest several times and the vista memory diag tool with no errors, and on individual sticks. i have stress tested my CPU and GPU with no errors many times.
    it sometimes freezes 5 mins after booting up, when surfing the web, when on screen-save,r when typing in word and when playing games, sometimes it will be fine for hours then suddenly just freeze up.
    I see nothing in the Event Viewer.
    My setup:
    MSI p7n Diamond with latest official BIOS version fomr the MSI site.
    Intel e8400 @ 3.00GHz (stock)
    XFX 9800 GTX Black Edition
    4x1GB Corsair DDR2 XMS2 Ram
    Antec Quattro 1000W SLI PSU
    Trust 5.1 Sound Card.
    Hitatchi SATA HDD
    Pioneer SATA DVD/RW
    Zalman 9700NT CPU cooler.
    I updated the BIOS using MSI live update, but it was freezing before the update aswell.
    I cant find any pattern to the freez-ups it seems entirely random.
    I have manually changed the ram voltage in BIOS to 2.1V (manufacturers reccomendation) and changed timings.
    However even at stock values it still freezes
    Thanks for reading

    Quote from: cliffo88 on 23-September-08, 01:56:38
    I updated the BIOS using MSI live update, but it was freezing before the update aswell.
    I cant find any pattern to the freez-ups it seems entirely random.
    YIKES
    Whatever you do, never attempt to update the BIOS of a system that is freezing randomly, especially via MSI Live Update.  In fact, you'd be well advised to avoid MSI Live Update entirely.
    The most commonly suggested method for flashing BIOS is via USB disk method and only after booting to DOS, not Windows.  Even in these conditions, if there are hardware issues that are still preventing the system from running stable (e.g. failing PSU, excessive heat, etc.), you should not attempt to flash the BIOS. 
    Attempting a BIOS flash under any of these conditions is risking permanent and irreparable damage to your motherboard.
    As for your Vista 64 lockups, I personally am not convinced that Vista drivers are completely reliable yet, much less Vista 64.  Another possibility is that your PSU is failing.

Maybe you are looking for