Is it normal that I lose my carrier evrytime im in my house? or at school?

hi!
i would like to know if its normal that I lose everytime im at my house or at school...the carrier?
thanks!

It all depends on your location, carrier and your reception.
Not all carriers work well in different locales, some do better then others.

Similar Messages

  • New install of Horizon 6.1. It's normal that provisioning linked-clones will take a long time ?

    Hi,
    First, I will describe my installation :
    1 Management Server : Dell PowerEdge R730 48 cores, 2.5 Ghz with 9 HDD 300 GB SAS 15K (RAID 5) and 256 Gb RAM
    2 VDI Hosts server : Dell PowerEdge R730 48 cores, 2.5 Ghz with 9 HDD 300 GB SAS 15K (RAID 5) + 1 SSD 200 GB, 256 Gb RAM, 2 grid K1 cards
    1 LUN on an Dell Equallogic PS6110X (750 GB) where I put the masters.
    1 switch Dell N4032F (10 Gb)
    All server will have 4 ports 10Gb configured with NPAR (so, i have 6 x 10 Gb virtual nic for the storage and 6 virtual nic for the VM network) and 2 ports 1 Gb for the management.
    My master :  Windows 7 SP1 x86 optimized with 24 Go HDD Thin-Provisionned (2 vCPU, 2 Go RAM, VMXNET 3 network cards). There is none added application on this master.
    I can't apply the Microsoft patch for VMXNET 3 because it says that this patch is not applicable.
    I don't have VSAN because only 2 VDI hosts, so I configure my pool for each hosts with local storage for the linked clones and local SSD for the replica.
    When I run the provisionning of the desktop pool (17 VM):
    The clone of the replica (Equallogic ==> local SSD) will take 2'30".... That's good for me (113 MB/s... the Equallogic is also used for another server storage on other LUN)
    But the rest of all operation to finish the provisionning will take 40'.
    More than 50% of cores will mount to 100% CPU on the host.
    I have tried to change my RAID5 (9 hard disk + 1 spare) to RAID10 (10 HDD). It take 50'.
    And, when all operations are finished... I have 2 or 3 VM with the message : Agent Unreachable and 1 or 2 hangs on Provisionning.
    A recompose a one VM Desktop will take approximatively 1'30.
    My question : it's normal that the provisioning will take so much time ?
    And other question : when i'm connected to a VM Desktop with Horizon client during a pool provisioning, the VM freeze or i simply can't connect. Even if i have ready desktop. And sometimes, vCenter client will freeze to a lot of seconds during provisioning
    Have someone idea ?
    PS : Sorry for my approximate English ;-)

    Today, i have try to put the RAID in RAID 0.
    Result : always 50 minutes for provisioning.
    So, the problem is not the RAID...
    In vRealize Operation Manager, I see that i have latency in disk command and disk operation (up to 7000 ms !!!!).
    And in vCenter performance (all type of performance), I have a lot of blank graphics during 5 to 20 seconds in different steps.
    I don't know where were looking my problem...
    Any idea ?

  • I have an iPhone 4s just eight months, it is normal that the battery lasts only 3 hours? please help me thank you very much.

    I have an iPhone 4s just eight months, it is normal that the battery lasts only 3 hours? please help me thank you very much.

    Three hours if definitely NOT normal. I get at least 48 hours out my 2 year old iPhone 4S' battery with light usage. Did you do the iOS 7 update on the phone it self (OTA) or through iTunes? In my experience most problems are caused by the OTA updates. For this reason I ALWAYS update using iTunes on my computer.
    I would suggest restoring your phone using iTunes on your computer and setting it us as a new phone. This downloads a fresh copy of iOS 7.1 from Apple and installs it on your phone. Just make sure that you transfer all purchased items (apps, music, etc.) as well as photos to your computer before restoring as the restore will completely wipe your phone. Do not restore from a back-up. Yes, you will loose all your data on the phone but restoring a back-up can restore the problem you are currently having back to your phone. Once your phone has been restored you can manually sync back your apps and music.
    Before restoring you can also check to see that battery-killers like Location Services, Background App Refresh, etc are only turned on for the apps that really need it. I recently read and article that said that the Facebook app can be a real battery killer. If you have this app installed turn of location services and background app refresh for this app and see if that helps. Also go to Settings / General / Restrictions / Location Services / System Services and turn off all the options in that menu. Your phone does not need any of those to function. Constantly using your phone's GPS is a huge battery killer. I only have Location Services enabled for Find my iPhone and Background App Refresh is turned off completely.
    I hope this helps.

  • Is it normal that menu is not working on live site under BC secure link?

    Is it normal that menu is not working on live site? It works only on my computer but not on customer's. I should apply seperate secured links for each sub-section for preview. Will it change when real domain name will be set?
    Here is my page http://2kenergy.worldsecuresystems.com/index.html

    Well said, Cyclosaurus.
    There's a ton of people here who really appreciate
    your help; I am one of them.
    Mark
    Thanks Mark, I try. And I welcome when people have better things to say and offer. They always can reply to the OP, not me.
    I DO NOT APPRECIATE when someone trying to jack my post, I don't care for his chit-chat or bantering. All that ended LONG ago, if you know what I mean

  • I am having ongoing connection problems with the Clash of Clans app which means that I lose battles, resources or boost times. This results in a loss of gems which I have purchased but will not be refunded as they will not accept responsibility.

    Whilst playing Clash of Clans I will continually lose the internet connection. This means that I lose battles, resources, gold etc and lose boost times. I have informed Supercell who blame my internet connection even though the iPhone, laptop and TV all work fine so it is obviously a technical problem with their game and probably something to do with their last updates.
    As I have purchased gems I feel that I should be compensated for my loss but they will not accept responsibility nor investigate the technical issue. The loss of connection occurs constantly with the game often freezing during replays or searching for battles. This is obviously not a connection issue.
    What suggestions do you have to resolve this situation?

    Hi.
    Thanks for the reply. I asked because I also wanted to see if others had encountered the same problem.
    I have no problems with my internet connection as I run my TV, laptop and iPhone off the same connection with no problems. I believe that since the recent updates to the game this has caused the problem. The game often freezes, cancels out or returns me to the main game screen during battles or replays.
    What I want to know is how do I get the game designers or owners to acknowledge my problem as at this time they keep telling me it is my internet that is a problem and not their game. How do they know this when they refuse to investigate. What can I do and who do I go to for support if they won't accept responsibility?
    I am very grateful to you for replying but concerned that if this can happen to me then how many other gamers are losing out and paying for something that they are not going to receive.
    Many thanks.

  • Is it normal that, when I try to share something on my iphone 5, be it via e-mail or textmessage, my keyboard is no longer touching the bottom of my screen, it 'floats' in the middle of my screen, making it impossible to choose the addressee?

    Dear fellow Apple owners,
    Is it normal that, when I try to share something on my iphone 5, be it via e-mail or textmessage, my keyboard is no longer touching the bottom of my screen, it 'floats' in the middle of my screen, making it impossible to choose the addressee?
    http://imgur.com/dwXwdGu.jpg
    Has anybody seen this before?
    I had it in 6.1.2, 6.1.3 and 6.1.4
    All of them have the same problem...
    Does anybody have a solution?

    Hey StevenKusters,
    Welcome to Apple Support Communities! First I would try backing up and erasing all content and settings, but if that doesn't resolve the issue you can use iTunes to restore your iOS device - part of standard isolation troubleshooting. Restoring your device will delete all data and content, including songs, videos, contacts, photos, and calendar information, and will restore all settings to their factory condition.
    iTunes: Restoring iOS software
    http://support.apple.com/kb/HT1414
    All the best,
    David

  • Is it normal that iTunes preview is louder

    IS it normal that iTunes preview is louder and when I buy it is lower or it just the application

    Same problem here :/

  • Is it normal that a Mac Mini 1.6duo play back of HD 60 frame home video is shuddery / jerky ? is this just processor limits ?

    Is it normal that a Mac Mini 1.6duo play back of HD 60 frame home video is shuddery / jerky ? is this just processor limits ?
    I have a pansonic 14meg camera which shoots HD 1060 30 frame and 720 60 frame .
    I have been using the 720 6 frame .  Playback using on my camera is perfect , but when I download on to my Intel 1.6duo macmini play back is jerky ... is this just processor limitation or if Mini should be fine to play back (using Quicktime7) could it be file corruption / camera issue.
    I think it is just my old computer probably starting to struggle !
    Many thanks

    Couple of things:
    There is virtually no standardisation of video formats. The file suffix is if little use to use as, in the case of video, files are just containers for data streams encoded and decoded by Codecs. Pretty much every manufacturer has their own codecs for each and every camera. Put it this way: every Jpeg still is pretty much the same, as there is an agreed standard for that format. There is no such guarantee with avi, mov etc. That's why the model and format of the camera is important.
    This model was released in 2012, and you're trying to read data from this using a QuickTime 7, which predates that by a few years. Oddly, Snow Leopard came with QuickTime X, so I'm not sure what you've done there.
    iPhoto does not guarantee to import all video from all cameras. What cameras it does support are usually still cameras with a video add on. What you have is a camcorder and the correct app for importing and manipulating video from such a device is iMovie rather than iPhoto. It may be able to transcode it.

  • Is it normal that every time when I switch off my Iphone 5s and then I turn it on again I have to insert my pin code?

    Is it normal that every time when I switch off my Iphone 5s and then I turn it on again I have to insert my pin code?

    That's what I was suspecting they were asking , but wanted to make sure.

  • Hi i  insttalled the free trial 3O days MacScan on OsX10.5 is it normal that for full scaning it takes so long time more even than one day?! on the other hand this application hasn't any uninstaller on image disc ,so how can i uninstal it from my hard?

    Hi i  insttalled the free trial 3O days MacScan on OsX10.5 is it normal that for full scaning it takes so long time more even than one day?! on the other hand this application hasn't any uninstaller on image disc ,so how can i uninstal it from my hard?Thanks

    Get rid of the tracking cookies. They are used to profile and track your browsing history. While they are privacy invading, by calling them spyware, MacScan is being a little dramatic in trying to sell you its crap. And in the future, for whatever browser you use, don't allow third-party cookies.
    To prevent tracking, get Ghostery. In addition to having Ghostery and forbidding third-party cookies, I clear out all cookies from one browsing session to another. If you always do that, you won't have any tracking cookies to worry about, so you won't need MacScan to find them for you. Btw, MacScan finds the tracking cookies in the first few minutes of scanning; if you want to use it for that, then that's all the time you need to run it for. But, as I said, you won't have any tracking cookies around if you just remove all cookies and don't allow third-party cookies. As soon as you visit a site that needs them, you'll just get new ones. No problem.
    Read all about cookies here.
    http://en.wikipedia.org/wiki/HTTP_cookie

  • Is there an advantage in optical transmission with TTL that you lose with radio?

    I have an ST-E3-RT and 4 600EX-RTs and that is all I use for lighting. I use both E-TTL and Manual. I always prefer to use my radio for E-TTL but was wondering, is there an advantage whatsoever for someone in my case to ever use optical when all I need is Radio transmission either in E-TTL or manual? Is there an advantage in optical transmission with E-TTL that you lose with radio? I read somewhere that may be the case where the optical communication between speedlights for determining exposure in TTL is more accurate with optical transmission than radio. It may be that the Nikon folks are pushing that thought but wanted to check. Thank you all.
    Solved!
    Go to Solution.

    RezaM wrote:
    Thank you very much TCampbell. That's great information. So there's really no reason to use optical if I use 600s with an ST-E3-RT?
    To answer the question you've been getting at all along - No, optical offers no advantage that can't be achieved with the proper RF system.   Conversely, there are several advantages to RF that optical lack.  It would be a handicap to use the optical system if you have 600s and a ST-E3-RT.
    If you don't have that system yet, but are considering it, keep in mind there are alternate options that are cheaper and can even have features the Canon system doesn't - such as wireless second curtain sync.

  • Just got a 5C, is it normal that when you transition from Siri to calling someone that the symbols along the top or screen go all feint and blurry?

    Just got a 5C, is it normal that when you transition from Siri to calling someone that the symbols along the top or screen go all feint and blurry?

    I have one it works fine. yeah, the Mac instructions aren't great. Try this.
    (1) make sure you have your VCR audio and video outputs connected to the side with the two selection switches.
    (2) be sure you know the difference between the audio and video outputs no matter which colors you use.
    (3) make sure the indicator light is green on cable that connects to your computers firewire port.
    (4) when you operate the vcr through Imovie. you will only be able to play your vhs tape. so to fast forward or reverse. you must use your vcr remote or your hand.
    (5) to import your footage just click on import in imovie.
    That should solve your problem. Also, in the future put these questions in the imovie forum.
    P.s. if this is helps you give me a vote or two. LOL
    anymore questions email me

  • I have an old iphone4 that I want to give to a friend that has a different carrier than I. I'm havaing difficulty understanding the instructions from Apple.  Why do I need to restore my phone if I have already updated my iphone 6

    I have an old iphone 4 that I want to give to a friend that has a different carrier than I.  Why do I want to restore my old phone to "unlock" it.  I erased all data when I updated my new phone.

    If you have arranged with your carrier to unlock you iPhone, and they have sent you an e-mail telling you that it has been unlocked and to follow instructions to unlock, then you will need to restore in order to complete the unlock.

  • Hello, is it normal that my connection wifi is often disconnected, my configuration is a imac under mountain lion which I bought yesterday, sorry for my english im french

    Hello, is it normal that my connection wifi is often disconnected, my configuration is a imac under mountain lion which I bought yesterday, sorry for my english im french,
    thanks for the help and for your answers

    Résolution des problèmes Wi-Fi

  • What is the name of the small part that comes lose when you are removing the two battery screws on the left side of the battery, the small part is under the top screw when removing the iPhone 4s battery?

    What is the name of the small part that comes lose when you are removing the two battery screws on the left side of the battery, the small part is under the top screw when removing the iPhone 4s battery?

    It's the part that means you've voided your warranty and the right to get an out-of-warranty replacement from Apple.

Maybe you are looking for