Is it poosible to avoid REP-0099 report is aborted upon user request

Hi friends,
is there any possibility to get rid of the above said message box, when user decides to not to run the report after actuallyhe called the report using RUN_PRODUCT built-in. some time the users do like this, and when they close the report this message box comes up. any possibility to give up this.
Thanks in advance

You could start the reports server with batch=yes command line option. No interactive messages will be displayed in that case.
Regards,
AKS.

Similar Messages

  • Report Job was cancelled upon user request???

    Hi,
    My reports take more than 10 minutes to complete, most times I get
    "Report Job was cancelled upon user request".
    error, how to fix this problem? Is there any time limit inside the report I can set.
    Thanks

    hi ,
    There is no limit on the report run time. The most probable reason why you are getting the 'Report cancelled upon user request' message is the users might have hit the "cancel Report" button which is displayed when it is running in 'SYNCHRONOUS MODE'. do not hit that button as it will terminate the report. to increase the speed of returning the results by the report, try improving the sql that you use in the report, or if you have DBA rights try adding in INDEXES on the columns of the tables used by the report.
    Hope this helps
    Manoj

  • Oracle Reports Server CGI - Report Job was cancelled upon user request.

    I am running reports on the web through Forms using Run_Report_Object built in. I am using Oracle 9iAS Enterprise Edition Release 1(1.2.2.2.2), Forms 6i Patch 9 (6.0.8.18.3) and Reports 6i Patch 9 (6.0.8.18) using CGI implementation. Most reports are running fine, but I have one that produces 125 pages and we are getting the following messages in the browser:
    Error: The requested URL was not found, or cannot be served at this time.
    Oracle Reports Server CGI - Report Job was cancelled upon user request.
    However if you look at the Reports Server Queue Status thru the browser it shows that the report did finish, but it took 16 minutes. But the user gets the above message in their browser window.
    Is there a way to get the first page of the report to display, while the rest of the report finishes, so the browser window doesn't timeout and display the above error?
    Any help would be greatly appreciated.

    hi ,
    There is no limit on the report run time. The most probable reason why you are getting the 'Report cancelled upon user request' message is the users might have hit the "cancel Report" button which is displayed when it is running in 'SYNCHRONOUS MODE'. do not hit that button as it will terminate the report. to increase the speed of returning the results by the report, try improving the sql that you use in the report, or if you have DBA rights try adding in INDEXES on the columns of the tables used by the report.
    Hope this helps
    Manoj

  • REP-1425 report formula DO_SQL error putting value into column

    Hi all
    I have opened a report 2.5 in Oracle9i Reports Developer and, it converted ok. However, when I run the report (paper layout), the message
    rep-1425 report formula DO_SQL error putting value
    into column. Column may not be referenced by parameter
    triggers
    appears. There are several report level formula columns and corresponding placeholder columns that are the cause of this error. The formula has the following :
    SRW.DO_SQL('SELECT RPAD(''DAILY TABLE AUDIT REPORT'',60,''.'')||TO_CHAR(SYSDATE,''DD-MON-YYYY'') INTO :REPORT_TIT FROM DUAL');
    COMMIT;
    RETURN('');
    I can't work out what this error message really means as the column, report_tit is a placeholder column and, the formula column is not a parameter trigger!! The report_tit placeholder is used as a source for a layout field. I noticed that the layout field is defined as a placeholder column in the converted report but in the reports 2.5 version, it is defined as a layout field.
    I can do a work around by replacing the SRW.DO_SQL statement with a normal PL/SQL SELECT statement. However, I wonder if anyone else has had the same problem and, if anyone can help provide an answer as to what this error really means and, also, how I can retain the SRW.DO_SQL statement and/or an alternative work around to the one that I have described.
    Thanks.
    Therese Hughes
    Forest Products Commision

    Hi again
    The firewall proved to be the problem after all! The firewall set in Reports config-files is not used for WebServices, it has to be set within the stub:
    Properties prop = System.getProperties();
    prop.put("http.proxyHost","yourProxyServer");
    prop.put("http.proxyPort","youProxyServerPort");
    I inserted this in my java-code and after some problems (see below), restarting Report Builder turned the trick, the report works now.
    Cheers
    Tino
    Here there mail I set up before I found that restarting Report Builder helped:
    Thanks for your answer, putting in the proxy-settings actually helped some - the same error message is
    popping up, but instantly and not after 10 seconds like before:
    My proxy lines look like this, I also tried "http://proxy.ch.oracle.com", but "proxy.ch.oracle.com" proved to
    be the correct syntax:
    public Float getRate(String country1, String country2) throws Exception
    Float returnVal = null;
    Properties prop = System.getProperties();
    prop.put("http.proxyHost","proxy.ch.oracle.com");
    prop.put("http.proxyPort","8080");
    URL endpointURL = new URL(endpoint);
    Call call = new Call();
    I tested the new proxy-entries by disabling the proxy preference in JDeveloper, so I could verify the added
    proxy-lines in the code work - they do. If I change the proxy to some incorrect value like
    "proxyy.ch.oracle.com", they fail.
    After unsuccessfully trying recompile and re-import of Java classes, I rebuild the report from scratch and
    stumbled over the same problem. Now the question is, whether I'm still doing something wrong with the
    proxy or whether there is another problem after passing the firewall....
    -------------------------------------------------------------------------------------------------------------

  • How to solve  problem :- rep-188-Report Server acccepts only Batch jobs

    How to solve problem :- rep-188-Report Server acccepts only Batch jobs
    Report server :- 10gR1

    Hello,
    Could you give us some details about the command line ?
    What is the value of DESTYPE ?
    Regards

  • REP-1247: Report contains uncompiled PL/SQL.

    Hi learned friends
    I have created a batch script that runs rdf generates pdf reports for me at each eod run.
    The report errors out:
    REP-0736: There exist uncompiled program unit(s).
    REP-1247: Report contains uncompiled PL/SQL.
    This is the command i execute:
    /udd001/app/oracle/product/dev60/bin/rwrun60 userid=/ report=/udd001/app/mu_tosd/ci/reports/GT0009R.rdf paramform=no destype=file batch=yes desformat=pdf mode=bitmap desname=/udd001/app/mu_tosd/ci/eodreport/GT0009R.pdf nonblocksql=no
    Now I have compiled all (Ctrl+Shift+K) successfully.
    Thanks a mil guys

    Hi,
    1) did you save the compiled reports?
    2) is the connect string you use to compile the reports with the same as the connect string you use when you run your reports in your batch?
    hope this helps,
    E.

  • REP-1814: Report cannot be formatted. Object 'vertically' can never fit

    Hi,
    Iam using report server 9.0.2. I have a typical problem. I have developed the report which works fine on the windows environment. But when same report is executed on AIX machine it is giving the problem
    REP-1814: Report cannot be formatted. Object 'vertically' can never fit
    within 'F_17'.
    What could be the problem? Do we need to change the setting or layout as per the environment specific?
    can any one help out in solving this problem plz
    it very urgent.
    thanks
    Kalyan

    I had this issue too, and finally discovered the problem. In my situation it had nothing to do with the vertical size of the field. The problem was with the proximity of the offending field to its enclosing frame. Not its vertical proximity, as the error message would have you believe, but its horizontal proximity.
    The magic number seems to be 5 spaces (I'm refering to a 'space' as pressing the arrow key when the field is selected) to away from the enclosing frame. I played with it, and when the field was only 4 spaces or closer to the frame, I got the "Object 'vertically' can never fit ... " error again. Again, not 5 spaces vertically away from the frame, but 5 spaces horizontally away from the frame. Hope this helps.
    Nate

  • Rep-51019 report authentication is missing. How to resolve it?

    I am getting the message rep-51019 report authentication is missing. How to resolve it

    The search box is in the 'Mail' toolbar. From menu bar select 'View' -> 'Toolbars' -> then check 'Mail Toolbar'. OR from the menu pull-down select 'Preferences' and check 'Mail Toolbar'.
    All of your preferences are stored in a profile folder which is separate from the TB program files, so when you reload or upgrade TB it uses the existing profile.

  • Encountered REP-1247: Report contains uncompiled PL/SQL

    Hi All,
    I am facing an issue where I have created a formula column inside the invoice RDF report but when I run the report this is errored with the below message ,I do have compile the formula column properly and i have also compiled the complete rdf properly .
    REP-0736: There exist uncompiled program unit(s).
    MSG-00100: DEBUG: AfterPForm_Trigger +
    MSG-00100: DEBUG: Multi Org established.
    MSG-00100: DEBUG: AfterParam_Procs.Get_Country_Details
    MSG-00100: DEBUG: AfterParam_Procs.Switch_On_Debug
    MSG-00100: DEBUG: AfterParam_Procs.Get_Trx_Number_Low
    MSG-00100: DEBUG: AfterParam_Procs.Get_Trx_Number_High
    MSG-00100: DEBUG: AfterParam_Procs.Get_Tax_Option
    MSG-00100: DEBUG: BeforeReport_Trigger.Build_Where_Clause
    MSG-00100: DEBUG: P_Choice: SEL
    MSG-00100: DEBUG: Choice is other than ADJ, setting ORDER BY.
    MSG-00100: DEBUG: AfterPForm_Trigger -
    REP-1247: Report contains uncompiled PL/SQL
    When I removed the formula column ,report is running succesfully .Any hint would be very helpfull ,please give your thoughts .Thanks in advance .
    Thanks
    Pratap

    Hi Paul
    This error usually means that the user that is running the report does not have the required privs on tables or packages used in the report. Solution: Open the report in reports builder. Set the runtime properties (Role) that is assigned to the report. Connect as the user running the report on the same database instance as your run environment. Compile the report (Shift-Ctrl-K). This should show you where the error lies.
    Regards
    Logan

  • REP-1247: Report contains uncompiled PL/SQ

    hi,
    i have a report with a FORMULA COLUMN
    when run my report i get this error REP-1247: Report contains uncompiled PL/SQ
    when i remove FORMULA COLUMN then run with out any problem,
    plz help me.

    1-I create a report emp that use 3 table t1,t2 and in formula t3
    2- i created role emp_role and grant 3 table (t1,t2,3) to this
    3- i assined emp_role to emp report (role name)
    4- i used BeforeReport (DBMS_SESSION.SET_ROLE('EMP_ROLE');
    5- compile all ,compile all ,ctl+shift+k ,ctl+shift+k
    6- create user co20001 and grant EMP_ROLE to this user
    7- when open this report from form with user co20001 i get error (unable to run report)
    and when run on browser as
    http://192.168.0.128:7778/reports/rwservlet?report=c:\erp\emp.jsp+server=rep_formsrv_BI+userid=co20001/co20001@nilper+MIMETYPE=REPORTS+destype=cache+desformat=spreadsheet+desname=hamid.htm
    i get error REP-1247: Report contains uncompiled PL/SQL.
    8- when grant table t3 as directly to co20001 my report run sucsses. why???????
    plz helpppppppppppp

  • REP-1247: There exist uncompiled program unit(s). REP-1247: Report contains

    Hello,
    i have the following problem when i first run this Report i have :
    REP-1247: There exist uncompiled program unit(s). REP-1247: Report contains uncompiled PL/SQL.
    many other reports i have having this problem pls help
    Abdetu..

    Any help pls...?
    i still experience the problem..?
    i found out the forulam that causes the problem as it is :
    ==========================================
    function CF_PREVIOUS RETURN Number is
              V_MATERIAL_HEIGHT1 NUMBER(40);
              V_MAX_SERIAL NUMBER(40);
              V_MAX_DATE DATE;
    BEGIN
              IF :SERIAL > 1 THEN
                   BEGIN
                                       SELECT MAX(SERIAL)-1
                                       INTO V_MAX_SERIAL
                        FROM PLN_TANK_TRANSACTION
                        WHERE TRANSACTION_DATE = :TRANSACTION_DATE
                        AND TANK_CODE = :TANK_CODE
                        AND MATERIAL_CODE = :MATERIAL_CODE;
                             EXCEPTION
                        WHEN NO_DATA_FOUND THEN V_MAX_SERIAL := 0;
                             END;
                        BEGIN
                             SELECT NVL(MATERIAL_HEIGHT,0)
                             INTO V_MATERIAL_HEIGHT1
                        FROM PLN_TANK_TRANSACTION
                        WHERE PLN_TANK_TRANSACTION.TRANSACTION_DATE = :TRANSACTION_DATE
                        AND PLN_TANK_TRANSACTION.TANK_CODE = :TANK_CODE
                        AND PLN_TANK_TRANSACTION.SERIAL = V_MAX_SERIAL
                        AND PLN_TANK_TRANSACTION.MATERIAL_CODE = :MATERIAL_CODE;
                   EXCEPTION
                        WHEN NO_DATA_FOUND THEN
                        V_MATERIAL_HEIGHT1 := 0;
                   END;
              ELSE --IF :SERIAL =  1 THEN
                        BEGIN
                             SELECT MAX(TRANSACTION_DATE)
                             INTO V_MAX_DATE
                   FROM PLN_TANK_TRANSACTION
                   WHERE TRANSACTION_DATE <=:TRANSACTION_DATE
                   AND TANK_CODE = :TANK_CODE
                   AND MATERIAL_CODE = :MATERIAL_CODE;
                        EXCEPTION
                        WHEN NO_DATA_FOUND THEN
                        V_MAX_DATE := NULL;
                        END;
                             BEGIN
                                  SELECT NVL(MATERIAL_HEIGHT,0)
                                  INTO V_MATERIAL_HEIGHT1
                                  FROM PLN_TANK_TRANSACTION
                                  WHERE SERIAL = V_MAX_SERIAL
                                  AND TRANSACTION_DATE = V_MAX_DATE
                                       AND TANK_CODE = :TANK_CODE;
                             EXCEPTION
                        WHEN NO_DATA_FOUND THEN
                        V_MATERIAL_HEIGHT1:= 0;
                             END;
         END IF;
         RETURN (V_MATERIAL_HEIGHT1);
    END;
         ------------------------------------------------------------------------------------------

  • Custom Oracle Report errored with Enter Password:  REP-0004: Warning: Unable to open user preference file. REP-0300: ORACLE error occurred. REP-0069: Internal error REP-57054: In-process job terminated:Terminated with error:  REP-300: ORACLE error occurre

    Hi Gurus
    We have created a custom oracle report and concurrent program and when we ran the concurrent program it is error out with below error
    Enter Password:
    REP-0004: Warning: Unable to open user preference file.
    REP-0300: ORACLE error occurred.
    REP-0069: Internal error
    REP-57054: In-process job terminated:Terminated with error:
    REP-300: ORACLE error occurred.
    Can any one help us
    Thanks in advance.
    Kumar

    Please see
    REP-0004 Warning - Unable to Open User Preference File. (Doc ID 26014.1)
    ApPsMaStI
    sharing is Caring

  • REP-0004: Warning: Unable to open user preference file.

    Hi,
    I am creating an invoice header in Payable through open interface in r12. I have inserted one line in  ap_invoices_interface table.
    When I run Payables Open Interface Import request, it completes normal but invoice does not create.
    Please see below log file and provide your guidence.
    Payables: Version : 12.0.0
    Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
    APXIIMPT module: Payables Open Interface Import
    +---------------------------------------------------------------------------+
    Current system time is 24-DEC-2013 12:39:46
    +---------------------------------------------------------------------------+
    +-----------------------------
    | Starting concurrent program execution...
    +-----------------------------
    Arguments
    p_source='MANUAL INVOICE ENTRY'
    p_batch_name='test4'
    p_purge_flag='N'
    p_trace_switch='N'
    p_debug_switch='N'
    p_summary_flag='N'
    p_commit_batch_size='1000'
    p_user_id='19334'
    p_login_id='2499994'
    Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
    American_America.AR8MSWIN1256
    Enter Password:
    REP-0004: Warning: Unable to open user preference file.
    MSG-00000: 0 invoice(s) were created during the process run
    MSG-00000: 0 invoice(s) were fetched during the process run
    MSG-00000:  summarize flagN
    MSG-00883: After Repport Trigger: Setting the Org Context to Multiple
    Report Builder: Release 10.1.2.3.0 - Production on Tue Dec 24 12:39:47 2013
    Copyright (c) 1982, 2005, Oracle.  All rights reserved.
    Regards
    Farooq

    Please also see if the following docs help.
    R12: Master Troubleshooting Guide for Supplier Contacts Open Interface Import Report (APXSCIMP) [Video] (Doc ID 1373699.1)
    R12: REP-0004 Error While Running Supplier Contacts Open Interface Import Program (APXSCIMP) (Doc ID 1195815.1)
    R12: APXSUIMP Ends With REP-0004 Error, But Output Does Not Display Reason for Rejection (Doc ID 1060824.1)
    Thanks,
    Hussein

  • Linking to an OBIEE report without showing the user and password

    Hi!
    we are trying to access to an obiee report from an external portal (coded with php).
    The idea is that the user clicks on a link an gets the report in pdf format. For that purpose we are using this url:
    http://ttivobiee01:7001/analytics/saw.dll?Go&Path=/shared/Prueba/ogp_obi&Action=Print&P0=1&P1=eq&P2="Criteria"."Key"&P3=1402&NQuser=user&NQPassword=pass&format=pdf
    But this url is expossing OBIEE's user and password.
    In order to avoid this security issue we tried to do an wget of the url but it doesn't return the report. Instead we get an html, which seams to download the report chunk by chunk (using javaScript).
    The question is, is there any way that we could let our portal ussers access to an obbie report without expossing the user and password?
    I have been looking into oracle forums and have found this: OBIEE Go URL with password protected
    but we couldn't use this aproach due to security issues.
    Thanks!
    Nuria

    Hi!
    We have finally done this (and it works!)
    <?php
    $urlInforme='http://obi:7001/analytics/saw.dll?Go&Path=/shared/Prueba/ogp_obi&Action=Print&P0=1&P1=eq&P2="Criterios"."Clave oficial"&P3=1402&NQuser=user&NQPassword=pass&format=pdf';
    $ch = curl_init($urlInforme);
    $ckfile = tempnam ("./", "CURLCOOKIE");
    $ch = curl_init ($urlInforme);
    curl_setopt ($ch, CURLOPT_COOKIEJAR, $ckfile);
    curl_setopt ($ch, CURLOPT_RETURNTRANSFER, true);
    $output = curl_exec ($ch);
    $ch = curl_init ($urlInforme);
    curl_setopt ($ch, CURLOPT_COOKIEFILE, $ckfile);
    curl_setopt ($ch, CURLOPT_RETURNTRANSFER, true);
    $fp = fopen("salida.pdf", "w");
    curl_setopt($ch, CURLOPT_FILE, $fp);
    $output = curl_exec ($ch);
    curl_close($ch);
    fclose($fp);

  • REP-0004 warning: Unable to open user preferance files

    Hi,
    I am new to R12. This is the upgradation project 11.5.1.2 to R12. we are newly installed the R12 application and 10g database.
    I am going to customize the standard report 'Printed Purchase Order Report', the rdf file is 'POXPRPOP'. but it is not getting any out put and xml tags also. even standard report also not getting any output and I noticed in logfile that the error like 'REP-0004 warning: Unable to open user preferance files'.
    I have tested in backend, its getting the data. then I have added command MO_GLOBAL.SET_POLICY_CONTEXT('S'.org_id) in before report trigger also. but getting same issue.
    Could you please help me wheather I need do any setups/modifications in RDF or Application. This is very urgency.
    Thanks in Advance.
    Regards,
    Thirupathi

    Hi Hussein,
    Thank you for your valuable response.
    I have followed the same steps for this customization what they are given in the metalink ID 374165.1.
    And one more thing, I am not getting any output if i ran the standard program 'Printed Purchase Order Report (Portrait)' in R12. what it could be the problem.
    Regards,
    Thirupathi

Maybe you are looking for

  • Branch office WDS still pullinh image from main site

    Hi, I'm trying to configure a WDS on our branch site. what i did was open a new folder named DeployFilesFromMaster on the branch office server and replicate the DeploymentShare from main to branch office using DFS. then i installed WDS services on th

  • Recent iTunes syncing Photos issue

    Hi all, Recently I've been having issues syncing iPhoto albums to my iPhone, iPad, and Apple TV. It results in an error such as :- "The <device> cannot be synced. The disk could not be read from or written to." This usually is during the import phase

  • And now it stops working?

    I go to Isync in the Menu bar - it says Syncing disabled since when? worked y'day so i go to the ISync help and it says look at the log "4:04:49 PM Warning Mac OS X synchronization services are not turned on on this computer." mmm not good so i trash

  • SAP Netweaver & BO Authorisation

    I am involved in a BO project, looking for better resources on SAP Netweaver and BO Authoirsation. we are in need to develop a authoirsation document for the project, appreciate if you'rs input. is there any templates? regards Indunil

  • Early 2008 MacBook Pro RAM upgrade limited to 3GB??

    My brother in law has an early 2008 MBP, 2.4GHz, I'm pretty much sure we are talking about the one described in this Apple tech specs: http://support.apple.com/kb/SP4 Now, it says that it supports up to 4GB of 667MHz DDR2 SDRAM. He bought 2x2GB Kings