Is it possible and how to find out what host, if any, is connected to a remote PXI prior to switching execution target programmatically or in devlopment environment?

Is it possible and how to find out what host, if any, is connected to a remote PXI prior to switching execution target programmatically or in devlopment environment?

This functionality is not available in LabVIEW RT. If you attempt to switch execution target to an RT controller already targetted by someone else, it will tell you too many hosts are connected and fail. Of course if it allows you to switch, then no one was connected. By attempting to switch execution target you can use the message above to determine if anyone is targetted or not, but if someone is, there is no way to determine who.
If you are concerned about this sort of thing, you might check the RT target options in LabVIEW RT to change the IP access list for hosts that are allowed to switch execution target to it.

Similar Messages

  • How to Find out What host is Sending Failed LDAP attemps from CUCM

    Hello,
    I have a strange issue.  I have a customer who has CUCM / UCCX / Presence and Unity Connection installation on a BE6k.  A couple times a week one of the users is reporting that her account is locked out.  When we take a look at the audit logs on the AD servers all the failed attempts are coming from the CUCM subscriber (usually about 10 failed attempts in a 3 minute time frame).  I've verified this in the CUCM tomcat security traces, however I can't find any logs that shows me the device that the attemps are comming from.
    This user is a Jabber / UCCX user so it could be one of these applications.  The strange part is sometimes she is locked out when her primary machine isn't even on.  Obviously it might be another device on the network she has logged into but i'm wondering anyone knows of any traces that may help me.  I've looked the regular tomcat logs but didn't find any detail there. 
    Thanks.

    We are having a similar issue.  We started using Cisco AnyConnect about a month ago full time (Not sure if this has any bearing on issue).  We have Cisco Jabber for Windows version 10.6 (Under advanced settings, Account type is set to Cisco IM and Presence with use following server checked and our Cisco Unified CM IM and Presence Administration Server IP entered), and when the user attempts to login to jabber, our CUCM Service Account (CUCMLDAP) locks out and nobody can login to Jabber, or any of our GUI interfaces for CUCM, Agent or Supervisor Software for UCCX.  We are having to unlock the service account many times a day.  Any assistance would be greatly appreciated.
    Thanks

  • How to find out what version of iTune and iPhoto I have?

    How to find out what version of iTune and iPhoto I have?

    For each application, launch it and choose About from that application's menu, or control-click its Dock icon, choose Show in Finder, control-click that, and choose Get Info.
    (76257)

  • HT1391 Hi can anyone tell me how to find out what and when my last purchases were made from the App Store ? I think my kids used all my credit

    Hi can anyone tell me how to find out what and when my last purchases were made from the App Store ? I think my kids used all my credit

    .from iTunes, go to View > Show sidebar
    From sidebar > Itunes Store > Click top left on your Apple ID email address > Account > ...scroll down > Purchase History > View All

  • How to find out what user locked account

    We had production type schema account locked this morning. I checked profile which this user belongs and it has 3 times for Failed Login Attempts. My question is how to find out what user had 3 unsuccessful login attempts and lock this account.
    Oracle version 8.1.7

    Assuming that [auditing was enabled|http://download.oracle.com/docs/cd/B19306_01/server.102/b14220/security.htm#sthref2916], the command
    AUDIT CONNECT WHENEVER NOT SUCCESSFULThat will write audit records when there is an unsuccessful login. Depending on how you've configured auditing, those records will either be written to the SYS.AUD$ table, in which case you can query them through a few different views, or to a file on the operating system that you can grep.
    Justin

  • "Web'n'Walk III" Huawei dongle, how to find out what Huawei model it is?

    I just bought this "web 'n' walk III" UMTS Modem (USB) made by Huawei. I want to instal it but do not know if the enclosed software is out of date (MobileConnectDriver(2.9.2)) and works under SL. Does anybody know how I find out what type of Huawei dangle it is so I can find the correct software?
    any tips as to how to use this smoothly as the stick is to SIM locked and I will use it with a SIM from an other provider (Stick is branded by T-Mobile).

    I worked out the model number, it is 'hidden' in small print on the back, in a larger number.

  • How to find out what is the lock key for the computer

    How to find out what is the lock key for the computer?

    You don't.
    If you forgot or lost the password, all you can practically do is reset it.
    The manner in which you do so depends on what version of OS X you are running. The older versions utilize the reset password utility on your recovery/re-installation disk/drive.
    On Lion, you use the following technique to reset the Administrators password:
    Boot to your Lion Recovery Partition, by holding down the Option key while starting, and then selecting the Recovery HD as the boot choice.
    Once booted, at the top of the screen is a menu ..., select Utilities / Terminal from the menu bar.
    In the Terminal window, type “resetpassword” (without the quotes) and press return. A “Reset Password” window will open. Select your boot volume (your SSD drive) if it is not already selected. Select your administrators username from the menu labeled “Select the user account” if it is not already selected. Follow the prompts to reset the password. Restart the computer from the apple menu.

  • How to find out what has been restored to a database instance?

    I'm using RMAN to back up and restore/recover. How to find out what has been restored/recovered to a database instance?
    Oracle version is 11gR2 but compatibility is set to 10.
    Edited by: 881656 on Aug 28, 2012 1:54 AM

    select output
    from V$rman_output
    order by stamp;
    select *
    from V$rman_status
    order by start_time desc;
    Regards
    Asif Kabir
    Handle:      881656
    Status Level:      Newbie
    Registered:      Aug 25, 2011
    Total Posts:      52
    Total Questions:      *30 (30 unresolved)*
    -- please close all the answered threads and mark your helpful post as correct/helpful

  • How to find out what generation my Classic is ?

    Can anyone advise me how I find out what generation my iPod Classic is ? Is there a website I can check with ?
    Many thanks,
    Shell

    Hi Niel, the article I get directed to, doesn't really explain the difference between 6th and 7th generation Classics. Is there anywhere (maybe on the Apple website) I can input the Serial Number and Part Number to be exact ?

  • How to find out what the geniric short forms stand for?

    Hi if you see the ThreadLocal class in jdk1.6 it is written like this in doc. ThreadLocal<T> and if you see the method Class.forName() the return type is Class<?> i am just confused a littele bit. how to find out what this <T> and <?> stands for? I mean how do i know that what to pass in their place?

    [Start from Here|http://java.sun.com/docs/books/tutorial/extra/generics/index.html]

  • How to find out what option you got

    How to find out what option you got because i changed my option from option 1 to option 3 and they said that it will change 31st and i want to find out if it changed how do i do that?

    Log on to bt.yahoo.com, and look under the "My Account" section. It tells you what package you're on.

  • How to find out what Oracle version?

    Hi,
    Could anyone tell me how to find out what Oracle version is on your AIX/Unix machine? It looks like Oracle Installer doesn't use the native OS installation(installp,pkgadd) process, so I can't use lslpp/pkginfo to find out what filesets are installed.
    Thanks
    HQ.

    Hi!
    As far ar Oracle version is concerned, you can find it at the database level after connecting to the database
    select * from v$version;
    i am not sure if there is someway to find at the o/s level.
    Good luck
    null

  • How to find out what are all the change pointers assoicated for an idoc ??

    Hi ,
    How to find out what are all the change pointers activated for an idoc ??
    Thanks,
    Varma

    Verma,
    You can check what are the active Change Pointers for the message type in tcode <b>BD50</b>
    Use tcode <b>BD61</b> to check whether change pointers are active or not??
    Hope this helps..

  • How to find out what network an iphone is locked to.

    How to find out what network an iphone is locked to.
    Assist.

    The previous owner/seller didn't provide this info?
    What does it say at Settings > General > About > Carrier?

  • How do find out what your network password is if you forgot it?

    How do find out what your network password is if you forgot it?

    It should be in your Keychain. Find it in Keychain Access.

Maybe you are looking for