Is it possible since I updated snow leopard to mountain lion that my isight mic doesn't work properly my voice sound like a robot

is it possible since I updated snow leopard to mountain lion that my isight mic doesn't work properly my voice sound like a robot

Similar Messages

After upgrade my MBP from snow leopard to mountain lion all my smb connections stop to work.

After upgrade my MBP from snow leopard to mountain lion all my smb connections stop to work.
Now iám using mac os 10.8.2
I can see the server, I can choose the drive, but when try to open a folder the message on Finder is: You don't have permissions to see the content.
I already delete the key and try to connect again, but the problem persist. Already try change the ip from file server. Already try differents users. (admin, guest, etc...)
I have a windows server 2008 and a NAS working with SMB protocol. Both with the same problem.
That problem occurs only on Finder, if I try see the folder by Terminal, is possible to see my files.
Any Solution ?
Any Tip ?
Any Question ?

Not knowing how much RAM is installed in your iMac, your iMac can take a total of 8 GBs of RAM.
Before upgrading to Mountain Lion, I would strongly suggest installing the maximum 8 GBs of RAM.
Correct and reliable Mac RAM can be purchased from online Mac RAM sources Crucial memory or OWC (macsales.com).
Here is OWC's link to your model iMac and the RAM modules you will need.macsales
http://eshop.macsales.com/item/Other%20World%20Computing/8566DDR3S8GP/
You can purchase and download OS X 10.8 Mountain Lion from the Mac App Store in the OS X dock.
Before installing, it would be prudent to make a backup copy of all of your important data or your entire current system. Either using, optical discs, USB flash drives or external hard drives.
This is too insure protection of your data in case something goes wrong with the install of OS X Mountain Lion.
Good Luck!

Am using Macbook pro mid 2010 running on OSX 10.9.5. It does not read my old Seagate back up plus ITB ext hard disk which opens and works on snow leopard. The back ups were made on snow leopard and mountain lion. How do I make it work on Mavericks?

I have been making back ups on a Seagate Back up plus drive on a macbook pro running on Mountain lion. Sadly the mac was stolen and all I had was the seagate back up. I tried opening it on my old iMac running on snow leopard and after several visits to this forum managed to open it. The data was safe and sound. Now I have received a hand me down macbook pro which runs on osx 10.9.5. I'm assuming there is a compatability issue as the drive does not come on at all when I hook it up to the usb port. I checked the seagate drive once again on the imac and its light came on on that system. Then I suspected there may be a problem with this macbook pro usb port. But it seemed to work fine when i hooked my camera cord into it. Is it that I must reinstall mavericks. In which case how do I back up before reformatting or reinstalling. BTW I did the command+ R thingy and repaired my internal Hard disc which was showing errors. What do I do next, your help is most appreciated if you have had a similar problem.

Your 2010 MBP would be able to handle Yosemite, but I would strongly suggest that you get the current problem sorted out before trying to upgrade to Yosemite. I'd also recommend another backup that isn't created by Time Machine if you are thinking of upgrading. SuperDuper and CarbonCopyCloner can make bootable clones of hard drives. If you clone your existing system to a fresh external drive, you would be able to boot from that drive and recover quickly in the event that your Yosemite upgrade didn't work out. Time Machine backups are not 100% reliable.
It's possible that, if your internal HD is the one that shipped with your MBP in 2010, it may be failing. If it keeps needing repairs, that is probably a sign that it is approaching the end of its useful life.
Have you run Disk Utility's Repair tool on the external drive as well?
I mentioned the hub because some people have reported here that attaching their USB 3 drives through a USB 2 hub solved some disconnection problems. A good-quality powered USB 2 hub won't cost much.
My most recent brush with random disconnections involved a nice new OWC drive enclosure. I used the cable that came with the drive, but the drive kept disconnecting. Using a different cable solved the problem. You wouldn't expect that what appeared to be a high quality cable would be a problem straight out of the box, but it was.

When I upgrade from Snow Leopard to Mountain Lion my Quicken 2006 for Mac stopped working, short of paying the $59 for Quicken Mac Essentials is there anything else I can do to read my old files?

help

Preface: I have no experience with Quicken Essentials, but have read, quite often, on this and other forums that it is a further strip down of features from Quicken 2007. So I agree, get Quicken 2007 for Lion/Mt. Lion, but...
BE CAREFUL with Quicken!
When Intuit finally released Quicken 2007 for Lion v16.1.1 in March, 2013 it was a godsend for older Quicken PPC users. It will directly open the data file from Quicken 2005, 2006 or 2007 PPC versions. The upgrade to 16.1.2 with the release of Mountain Lion was also stable.
I found version 16.1.3 to crash on opening on my Lion Mac, so I downgraded back to version 16.1.2 and all is well. Others are now reporting that version 16.1.4, the current version sold by Intuit, is also causing some problems. I have not been able to isolate these reports.
My point: purchase Quicken 2007 for Lion, but ALSO:
1. Make copies of your Quicken 2007 PPC data file and back them up BEFORE you attempt to open it in 16.1.4; and
2. If you run into problems, let me know by email (michaellax) at AOL dot com.
If it works fine for you, please report that too!
PS: Baltwo will tell you he has encountered no problems and good for him. But the reports of others with problems keep mounting...

I currently have Leopard, and there are no longer updates for it. So I must upgrade to either Snow Leopard or Mountain Lion. Without doing so I cannot update my itunes, and my ipod is no longer compatile with my mac. How can I buy the upgrade

I currently have Leopard, and there are no longer updates for it. So I must upgrade to either Snow Leopard or Mountain Lion. Without doing so I cannot update my itunes, and my ipod is no longer compatile with my mac. How can I buy the upgrade, since I do not have access to the mac store as that comes with Snow Leopard? I went to Best Buy and they said neither Snow Leopard or Mountain Lion can be bought there.

Start by checking if you can run Snow Leopard:
Requirements for OS X 10.6 'Snow Leopard'
http://support.apple.com/kb/SP575
Whilst Apple have withdrawn Snow Leopard from their stores, you can still get it from Apple by calling 1-800-MY-APPLE (if you are in the USA) and they will supply the SL DVD for $20 for a single user, or $30 for a family pack that covers up to 5 Macs. You can also purchase the code to use to download Lion from the same number (Lion requires an Intel-based Mac with a Core 2 Duo, i3, i5, i7 or Xeon processor and 2GB of RAM, running the latest version of Snow Leopard), or you can purchase Mountain Lion from the App Store - if you can run that:
http://www.apple.com/osx/specs/
If you are outside the US call your national Apple Helpline:
http://support.apple.com/kb/HE57
If you're in the UK, use this number: 0871 508 4400
When you have installed it, run Software Update to download and install the latest updates for Snow Leopard.
To use iCloud you have to upgrade all the way to Mountain Lion:
http://support.apple.com/kb/HT4759

I have updated my mac from snow leopard to mountain lion 3 days back. I had some important data in my library folder and it got overwritten. Is there any way i can get the data back from my snow leopard library folder?

I have updated my mac from snow leopard to mountain lion 3 days back. I had some important data in my library folder and it got overwritten. Is there any way i can get the data back from my snow leopard library folder?
I tried mackeeper to recover files but it could not. Any other way any one has tried to recover a system library folder after OS upgrade?

No, it doesn't store a clone. You would have needed to make one with either SuperDuper or CarbonCopy Cloner.
If the files were in your ~/Library folder then they may still be there. As I said, you can access it by
going to your Finder "Go" menu hold the option key to choose "Library". I wouldn't think an upgrade would overwrite anything in ~/Library.
If you have a Time Machine backup you may also be able to use that to retrieve them.

Do I need to update Bootcamp 3.3 after upgrading from Snow Leopard to Mountain Lion?

Do I need to update Bootcamp 3.3 after upgrading directly from Snow Leopard to Mountain Lion? If so, what is the recommended version for my machine?
Other pros and cons we should consider? Not sure what is considered best practice.
We have a mid-2011 iMac (12,1) running Win7 64bit. Concerned about firmware updates not being compatible with Bootcamp 3.3. Firmware updates forThunderbolt port were part of post-Mountain Lion updater install. Not sure what other firmware/boot changes might have been applied to support the new recovery partition, for example. Will the 3.3 windows control panel still work safely?
Win7 still boots OK, at least for now. Backup is current.
I'd like to get the entire machine current again. Bootcamp 5.0 didn't want to download (appeared to hang writing to my external drive, which is otherwise fine). Bootcamp 4.1 refused to install on Win7 (claimed it wasn't for my machine, so I aborted. Downloaded from apple support page directly).
I've searched the forums for this specific question - I see plenty of info for upgrading Bootcamp 4 to 5, but nothing for 3 to 5.
Thanks much in advance,
-b

Appreciate the quick response.
There are basically 2 schools of thought here:
- If it ain't broke, don't fix it.
- Don't fall off the upgrade cycle (apply patches whether you have an issue or not in order to ward off trouble before it happens).
I don't have a specific issue that I'm chasing on the Win7 side right now. I'm attempting to address having fallen off the upgrade cycle by staying on Snow Leopard too long.
I appreciate that the Win7 side under bootcamp is its own thing (upgrades to Mac OS don't cross over or effect the bootcamp partition) - except where firmware upgrades coming out of Mountain Lion change the hardware interface to Win7. Hence my questions.
-b

Can i update version 10.5.8 to snow leopard or mountain lion, can i updatee MacOSX version 10.5.8 to snow leopard or mountain lion

can i update version 10.5.8 to snow leopard or mountain lion,

Not if you have a PPC machine. In that case your are at the limit. But if you have an Intel model:
Upgrade Paths to Snow Leopard, Lion, and/or Mountain Lion
You can upgrade to Mountain Lion from Lion or directly from Snow Leopard. Mountain Lion can be downloaded from the Mac App Store for $19.99. To access the App Store you must have Snow Leopard 10.6.6 or later installed.
Upgrading to Snow Leopard
You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard — Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
     Snow Leopard General Requirements
       1. Mac computer with an Intel processor
       2. 1GB of memory
       3. 5GB of available disk space
       4. DVD drive for installation
       5. Some features require a compatible Internet service provider;
           fees may apply.
       6. Some features require Apple’s iCloud services; fees and
           terms apply.
Upgrading to Lion
If your computer does not meet the requirements to install Mountain Lion, it may still meet the requirements to install Lion.
You can purchase Lion by contacting Customer Service: Contacting Apple for support and service — this includes international calling numbers. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
     Lion System Requirements
       1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
           or Xeon processor
       2. 2GB of memory
       3. OS X v10.6.6 or later (v10.6.8 recommended)
       4. 7GB of available space
       5. Some features require an Apple ID; terms apply.
Upgrading to Mountain Lion
To upgrade to Mountain Lion you must have Snow Leopard 10.6.8 or Lion installed. Purchase and download Mountain Lion from the App Store. Sign in using your Apple ID. Mountain Lion is $19.99 plus tax. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
     OS X Mountain Lion — System Requirements
       Macs that can be upgraded to OS X Mountain Lion
         1. iMac (Mid 2007 or newer) — Model Identifier 7,1 or later
         2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) —
             Model Identifier 5,1 or later
         3. MacBook Pro (Mid/Late 2007 or newer) — Model Identifier 3,1 or later
         4. MacBook Air (Late 2008 or newer) — Model Identifier 2,1 or later
         5. Mac mini (Early 2009 or newer) — Model Identifier 3,1 or later
         6. Mac Pro (Early 2008 or newer) — Model Identifier 3,1 or later
         7. Xserve (Early 2009) — Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
Are my applications compatible?
         See App Compatibility Table — RoaringApps.
     For a complete How-To introduction from Apple see Upgrade to OS X Mountain Lion.

I updated from Snow Leopard to Mountain Lion and dont like many of the changes. Why won't homepage open in full screen? and why are internet searches slower?

I updated from Snow Leopard to Mountain
Lion and homepage wont open in fullscreen.
web searches are slower to load too.
what give?

What homepage are you referring to? The one in in safari? Elsewhere?

Problem activating Facetime on iMac: I recently upgraded my iMac from Snow Leopard to Mountain Lion. Since the upgrade, when I try to sign on with my valid Apple ID

Problem activating Facetime on iMac: I recently upgraded my iMac from Snow Leopard to Mountain Lion.
Since the upgrade, when I try to sign on with my valid Apple ID & password I get this message "The server encountered an error processing registration. Please try again later."
I have tried (again later) repeatedly without success. PLEASE HELP!

Is it legal to using my personal AppStore account to update my office Max OS(Snow Leopard) to Mountain Lion?

Hi,
I want to know is it legal to using my personal AppStore account to update my office Mac OS(Snow Leopard) to Mountain Lion?

This can be found at http://www.apple.com/legal/itunes/us/terms.html#APPS
MAC APP STORE PRODUCT USAGE RULES
Except as otherwise set forth herein,
If you are an individual acting in your personal capacity, you may download and use an application from the Mac App Store (“Mac App Store Product”) for personal, non-commercial use on any Apple-branded products running Mac OS X (“Mac Computer”) that you own or control.
(ii) If you are a commercial enterprise or educational institution, you may download a Mac App Store Product for use by either (a) a single individual on each of the Mac Computer(s) used by that individual that you own or control or (b) multiple individuals on a single shared Mac Computer that you own or control. For example, a single employee may use a Mac App Store Product on both the employee’s desktop Mac Computer and laptop Mac Computer, or multiple students may serially use a Mac App Store Product on a single Mac Computer located at a resource center or library. For the sake of clarity, each Mac Computer used serially by multiple users requires a separate license.
(iii) Use may require sign-in with the Apple ID used to download the Mac App Store Product from the Mac App Store. Mac App Store Products can be updated through the Mac App Store only.

After updating my mac from snow leopard to mountain lion, i can not connect to the internet anymore

After updating my mac book pro from snow leopard to mountain lion, i can not connect to the internet anymore ;(
Anyone know what is wrong with it??
Is something wrong with mountain lion or the wifi itself????
HELP PLEASE!!
I need to use the internet desperately but i cant...
Thank you so much xxx

Hi galleryskins,
The article below may be able to help you with this issue.
Click on the link below to see more details and screenshots.
I've quoted some helpful highlights for you:
OS X Mountain Lion: Zoom content on the screen
Zoom with a mouse or trackpad
To zoom in and out, hold down the modifier key you specified while you perform the scroll gesture.
For example, if you have a trackpad and used the default settings, zoom in by holding down the Control (^) key while you drag two fingers up on the trackpad. Zoom out by holding down the Control key while you drag two fingers down on the trackpad.
If you chose Picture-in-picture zooming, a window appears near the mouse cursor with the magnified image. If you chose Fullscreen zooming, the entire screen displays the magnified image.
I hope this information helps ....
Have a great day!
- Judy

Hi I just updated from Snow Leopard to Mountain Lion. I write DVD's using Final Cut Pro, creating a DVD that plays HD and Standard Definition on one disk. My problem is when I used load the disk on my G5 it would ask if you want High Definition or Standar

Hi I just updated from Snow Leopard to Mountain Lion.
I write DVD's using Final Cut Pro, creating a DVD that plays HD and Standard Definition on one disk.
My problem is when I used load the disk on my G5 it would ask if you want High Definition or Standard Definition, now it just defaults to Standard Definition.(I'm using Apple's DVD Player)
Can I fix this problem?

Addendum: I read on a post here (http://forums.macrumors.com/showthread.php?t=420169) about removing some kext files in order to trick OSX into thinking that there were no FireWire ports.
I followed the instructions and removed from /System/Library/Extensions/ the following files:
IOFireWireSerialBusProtocolTransport.kext
IOFireWireAVC.kext
IOFireWireFamily.kext
IOFireWireIP.kext
IOFireWireSBP2.kext
I restarted and BAM...Snow Leopard booted crazy fast and the mouse and keyboard worked instantly.
The System Profiler says "No FireWire ports were found."
So this tells me that the FW port is probably the culprit and is messing up the installation.
So how do I hack the Mountain Lion installer and tell it to ignore the FW port, which is obviously quite dead? Or is there something I can do to the Base system that is similar?

Upgrading from snow leopard to mountain lion will i have trouble using my Pages and Iphoto since it's not the latest version

I am contemplating upgrading my OS from Snow Leopard to Mountain Lion. Currently, I don't have ICloud available on my computer. I also keep getting messages to upgrade my IPhoto to '11 version as well as Pages. I know, I'm behind, but my theory is if it isn't broke don't mess with it.
My concern is I don't want to lose my pictures and YES, I have backed up with Time Machine to an external hard drive. (I just hope that's good enough). IF I upgrade to start using ML OS, will I need to restore anything from my external hard drive or will I be able to start using computer as if nothing changed?
I know enough to be dangerous and I'm hesitant to upgrade for fear of losing everything. Would appreciate help. Thanks!

Charmedgreen wrote:
So it's alright to "skip" downloading the Lion version first? I can go directly from Snow Leopard to Mountain Lion?
Correct, in fact, Lion is no longer directly available from the App Store.
Also, do I need to "empty my trash" before going forward?
No need.
Matt

Time machine can not access time capsule after upgrade from snow leopard to mountain lion

Two days ago I upgraded my 2009 17" MBP from Snow Leopard to Mountain Lion. That evening my time capsule/time machine combination worked fine and did an incremental backup of about 12 gigabyte. Yesterday - only one day later - the time machine backup did not work anymore.
It appears that the system can not find the time capsule - even though it shows the remaining free space on the time capsule (so it did find it after all).
The message is always the same:
Time Machine can not complete the backup "Time Capsule"
The image of the backup volume "/Volumes/Data/Pauls MacBookPro.sparsebundle" is not accessable (Error -1).
I also can not delete the backup image on the time capsule since it is read-only. And I do not want to format the time caspsule yet since my wife's MBAir is also using the same time casule.
I tried out all kinds of suggestions (hard and soft resetting both the MBP and the TC, entering the password again, setting the TC up again) all to no avail. No backup is possible anymore.

Mr. Zooot wrote:
Time Machine can not complete the backup "Time Capsule"
The image of the backup volume "/Volumes/Data/Pauls MacBookPro.sparsebundle" is not accessable (Error -1).
I also can not delete the backup image on the time capsule since it is read-only.
Sounds like you got this message earlier:
If so, see #C13 in Time Machine - Troubleshooting.
Offhand, I don't recall anyone not being able to delete one via the Finder (but most were only backing-up one Mac, so just erased the disk).
You may have to wait for that message to appear again (24 hours later), or you might try holding Alt/Option with the TM icon in the menubar, and select Verify Backups if it will let you.

Is it possible since I updated snow leopard to mountain lion that my isight mic doesn't work properly my voice sound like a robot

Similar Messages

Maybe you are looking for