Is it possible that after 3 years my Mac computer damaged the port to my camera?  I have not always disconnect it properly using eject before disconnecting. I have 2 cameras that are Sony CyberShot and they both shut down when I connect to the computer.

Is it possible that after 3 years my MacBook has damaged the port on my camera?  I thought I had a battery problem with both my Sony CyberShot cameras (they are they same age).  I had trouble getting the cameras to come on but then when it did come on after charging repeatedly, it turned off when I connected it to the computer to download pictures.  I ordered 2 new batteries and the camera came on but went off immediately when I connected it to the computer.  After that, the camera would not come back on.  Help please!

John, thanks for the email so quickly.
I too hope I haven't tried "everything" either but I am reasonably technical.  I had done what you suggested to do before but I did both again.
Ethernet is yellow in the left side bar.  In the right pane it's status says Connected but then below it says "Ethernet has a self-assigned IP address and will not be able to connect to the Internet."
I have tried the assist me menu and Network Status has Ethernet Green, Network settings Yellow, ISP Green, and Internet and Server Red and Failed for both.  I have turned things off and on, checked cables, deleted all locations and tried restting them up but to no avail.  I even disconnected everything and connected the mac directly into the cable modem itself and the thing still will not connect.
Thoughts???

Similar Messages

  • TS4036 I have moved from one company to another and they both use iphones I backed my phone up before it was shut down I tried to retrieve contacts from my PC it did not work will it work when I get my new iphone?

    I have moved from one company to another and they both use iphones I backed my phone up before it was shut down I tried to retrieve contacts from my PC it did not work will it work when I get my new iphone?

    I updated my iPhone onto my friend's MacBook
    Why would you do that, and not on your own computer?  See the hassle it caused you?
    can he just email me the folder
    Backup files are too big to email.  Use FTP, DropBox, etc...
    how do I then put all that data back into my current phone from the new computer?
    How to restore iPhone:  http://lmgtfy.com/?q=how+to+restore+iphone

  • My Ipod nano 6Th sometimes shuts down when I connect the phones, sometimes it not shuts down, but the volume and standby buttons do not work.

    My Ipod nano 6Th sometimes shuts down when I connect the phones, sometimes it not shuts down, but the volume and standby buttons do not work. If I not connect the phones everything works fine. But with the phones connected it goes crazy. I alredy reset, restore and nothing. If I reset and let the phones connect the up and down volumes buttons start to work. But the power/stand by button don´t. I need to disconect the phones to the power/stand by button starts  to works. Anyone already have simmilar problem?

    A windows error message appears saying iTunes has encountered a problem and needs to shut down.
    let's get a crash log from itunes, and send it to the Apple engineers for a look.
    Typically, you'll need to configure Dr. Watson on your PC in order to generate crash logs. Windows start menu -> Run. Type in "cmd". Hit return. At the prompt in the command line window that comes up, type in
    drwtsn32 -i
    And hit return.
    This will create crash logs in Documents And Settings\All Users\Application Data\Microsoft\Dr Watson\. There'll usually be a file in here called "drwtsn32.log"
    prior to collecting the itunes crash log, delete any existing crash logs in there. (we want to make sure we send the correct crash log.)
    Generate the crash, collect the crash log, and and send it as an attachment to this email address.
    in the email to Roy, be sure to include the following information:
    - A link to the thread on Apple Discussions where the issue is being discussed
    - The username you are using in the thread
    - The version of iTunes you are using or trying to use
    - the version of Windows you are using (mention service packs)
    - A concise description of the issue you are seeing
    - The exact text of the error message you are seeing

  • My MacBook Pro shuts down when i connect a USB cable.

    My MacBook Pro shuts down when  i connect a USB cable, only when its a 30 pin apple cable. Well one USB shuts it down and the other one doesn't work at all.
    it only happens when i use an apple cable. It has no problem with my external drive nor with other things.
    Ps. i did use different apple cables and they all shut it down.

    What are you connecting? iPad, iPhone, what?
    When you say a 30-pin Apple cable do you mean a Lightening to USB cable?
    Little more info needed...
    Clinton

  • My older iMac running Mavericks 10.9.4 shuts down when it connects to the internet.  Resetting the SMC doesn't help.  What can I do?

    My older iMac running Mavericks 10.9.4 shuts down when it connects to the internet.  Resetting the SMC doesn't help.  What can I do?

    1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
    Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
    2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
    There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
    3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can read it yourself without disclosing the contents to me or anyone else.
    You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
    In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
    You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
    Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
    4. Here's a summary of what you need to do, if you choose to proceed:
    ☞ Copy a line of text in this window to the Clipboard.
    ☞ Paste into the window of another application.
    ☞ Wait for the test to run. It usually takes a few minutes.
    ☞ Paste the results, which will have been copied automatically, back into a reply on this page.
    The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
    5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
    6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
    7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
    Triple-click anywhere in the line of text below on this page to select it:
    PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */   /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;5p;6p;8p;12p;' ' {sub(/^ +/,"")};NR==6;NR==13&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/ { next;} /(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/ { next;} /%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]" "$1;b=b$1;} END { if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n   "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n   [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n   ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' '" L*/P*/*loginit*' 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' -i4TCP:0-1023 com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;A2 0 $((N1+1)) 2;C0;A1 0 $N1 1;C0;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D13 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    8. Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
    9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
    exec bash
    and press return. Then paste the script again.
    10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
    If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
    11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
    [Process completed]
    to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
    12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
    At the top of the results, there will be a line that begins with the words "Start Time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
    If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
    13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
    14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
    Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

  • ITunes shuts down when I connect my iPod 30gb

    I desperately need help. Recently my computer crashes and I reformated it. So I had to reinstall iTunes. Ever since then iTunes shuts down when I connect my iPod 30gb. A windows error message appears saying iTunes has encountered a problem and needs to shut down. I am unable to update my iPod which drives me crazy. Somebody please help!
    I browsed through some threads which have similar problems as I do, but I am unable to reply in any. It says: This topic has been archived - replies are not allowed.
    There's this thread here about the problem I am facing but I doesn't seem to understand the solution to it.
    http://discussions.apple.com/thread.jspa?messageID=1630589
    Can somebody please help me?

    A windows error message appears saying iTunes has encountered a problem and needs to shut down.
    let's get a crash log from itunes, and send it to the Apple engineers for a look.
    Typically, you'll need to configure Dr. Watson on your PC in order to generate crash logs. Windows start menu -> Run. Type in "cmd". Hit return. At the prompt in the command line window that comes up, type in
    drwtsn32 -i
    And hit return.
    This will create crash logs in Documents And Settings\All Users\Application Data\Microsoft\Dr Watson\. There'll usually be a file in here called "drwtsn32.log"
    prior to collecting the itunes crash log, delete any existing crash logs in there. (we want to make sure we send the correct crash log.)
    Generate the crash, collect the crash log, and and send it as an attachment to this email address.
    in the email to Roy, be sure to include the following information:
    - A link to the thread on Apple Discussions where the issue is being discussed
    - The username you are using in the thread
    - The version of iTunes you are using or trying to use
    - the version of Windows you are using (mention service packs)
    - A concise description of the issue you are seeing
    - The exact text of the error message you are seeing

  • My mac book pro shuts down when I connect external displays.

    I use my macbook pro for projecting keynote presentations and also to a 90" monitor.  I've been able to do this until the lastest software update.  Now the computer shuts down when I connect to the projector and monitor.  I'm at witts end.  Regretting I did latest update. Thanks for any help.

    Have you reset the SMC and PRAM?

  • Why does Macbook Pro have gray "curtain"and msg to shut down when playing video online?

    Hi,
    I have a MacBook Pro running Snow Leopard v 10.6.8 and have put on all the security updates.
    I bought this machine just days after the newest MBP's were released with Lion because I wanted to stay with Snow Leopard
    From the very beginning I would have occasional "gray screens" with a message that I'd encounterd a problem and needed to shut down.  It always occured while I was watching a streaming video online (Flash?) but it didn't always happen.  I updated my Flash plugin and that seemed to help.  I use both Safari and FireFox and both are now updated to the latest versions.
    I had also noticed via iCleanMemory that my memory availability was very low .....I always have many tabs open in my browsers and have backup software that backs up to online storage running and when I watched a video, it dropped to almost 0 and everything ran slow.  I had 4 GB Ram.
    So, I ordered new ram and put that in and now have 8 GB.  Machine runs fast. Love it....except it keeps giving me that veil of gray and the message to shut down.  It happens several times a day now and while usually in conjunction with watching a video clip, it's not always the case.  But I have lots of available memory.  That wasn't the issue.
    I found an Apple Support paper relative to needing a video update on some mid 2010 MBP's and downloaded it.  It won't install and says it won't run on my system so that didn't help.
    I'm at my wits' end trying to keep this thing running.  Everytime I have to shut it down it means a minimum of 8 min...sometimes more.....before it will restart.  If I try to restart sooner than that, it begins to boot and then just has lines and lines of numbers and code running across it....and often continuous beeping sounds and I have to hold the button down to shut it off again.  If I wait long enough, it does boot back up and sometimes runs fine as long as I'm not watching video clips, a streaming tv show or clicking on a lot of links in web pages.
    I don't believe it has shut down when I was doing anything that wasn't web related....i.e. on a browser. And, when I was running with only 4 gb ram, it rarely shut down, just ran very, very slowly.  Now with 8 gb ram it is speedy but doesn't seem to want to keep working!
    Anyone have any ideas what I should try next?
    Thanks
    Paula

    Hi Allan,
    Thanks for your reply.
    I have been closing iCleanMemory but the shut down (kernel panic) was still happening.  Not sure how to go about uninstalling it as it's one that runs at start-up and dragging it to the trash might not get rid of it completely.  I"ll find it's web site and see if they have any info.
    Haven't checked your web link yet (it's late and gotta get to bed) but will do so tomorrow.
    I also run Backblaze and DropBox that begin at startup and are constantly updating in the background, iStatMenus and Sharpshooter. 
    The kernel panics were happening....tho much less frequently.....before i put iClean Memory on.  If I remember right, I installed it just because I had those periodic shut downs and wondered if it was a lack of memory.  Because I then saw that memory was very low all the time, I decided I must need to put more memory in.  And that seems to have made the issue worse while also making the machine work faster for the time it is running.
    Now, I've been working on here for a couple of hours and had no problem at all......but I haven't asked it to play any kind of video.  Before I quit for the night, I'll try to watch the last one I tried that caused it to shut down and see if it does it again.
    I do appreciate your help as I have just enough knowledge about these things to be dangerous.
    Paula

  • Itunes shuts down when I connect my ipod video

    I have a ipod video 60gb (the one right before they released the 80gb). I recently had to reinstall OS 10.4 due to freezing issues. Well, it still freezes, and it froze during the re-sync of the ipod and I had to reboot the ipod cause I had to reboot the computer. Now whenever I connect the ipod, it is recognized by the CPU, but whenever Itunes starts up with the ipod connected, it just shuts right down.
    Help...

    A windows error message appears saying iTunes has encountered a problem and needs to shut down.
    let's get a crash log from itunes, and send it to the Apple engineers for a look.
    Typically, you'll need to configure Dr. Watson on your PC in order to generate crash logs. Windows start menu -> Run. Type in "cmd". Hit return. At the prompt in the command line window that comes up, type in
    drwtsn32 -i
    And hit return.
    This will create crash logs in Documents And Settings\All Users\Application Data\Microsoft\Dr Watson\. There'll usually be a file in here called "drwtsn32.log"
    prior to collecting the itunes crash log, delete any existing crash logs in there. (we want to make sure we send the correct crash log.)
    Generate the crash, collect the crash log, and and send it as an attachment to this email address.
    in the email to Roy, be sure to include the following information:
    - A link to the thread on Apple Discussions where the issue is being discussed
    - The username you are using in the thread
    - The version of iTunes you are using or trying to use
    - the version of Windows you are using (mention service packs)
    - A concise description of the issue you are seeing
    - The exact text of the error message you are seeing

  • Computer shuts down when I connect my Ipod Touch to it.

    Each time I go to connect my Ipod touch to my computer, I get the blue screen of death appear on my computer with a huge error message and then it shuts down, 'To protect itself'
    I have tried to connect my Ipod Nano and thats fine, works no problems.
    I have followed various advice notes from Apple with no joy of sorting the problem out.

    I've been having the same issue with my 2nd gen itouch. My computer would crash and show a blue screen after I connected my itouch. My other IPODS would work fine. After unistalling/reinstalling several times, restoring my computer to an earlier date, and updating all usb drivers, I was still having my computer crash with my itouch. If you have a webcam, type in the following in the search support: What to do when Windows XP or Vista computer displays a blue screen error message when syncing the iPhone or iPod touch.
    I solved my issue with solution one. My itouch is connecting fine without any crashes, for now. Hope this solves your issue.

  • Itunes keeps shutting down when I connect my IPod Classic

    Itunes shuts down whenever I connect my IPOD classic  and sync attempts to start.  I have had this IPod for several years and I have had Windows 7 for over 6 months.  I am trying to update versions, but I get an error message with that also.I have also seen posts on Microsoft and they aren't helpful.....I have seen many posts on Itunes also regarding same issue. What is up when the company will not fix their problems with the products?

    I downloaded the 64bit system....did it like 3 times.   Finally, I found some other helpful hints.  I tried loading ITUNES in safe mode, still couldn't get it to not shutdown once I connected the IPod, I then logged into one of my other user accounts, then I was able to restore the settings, however, it removed all my songs and syned with the Itunes on that user acct (which was my nano IPod).  That was ok, because then I was able to go back to my regular account and sync and updated all my songs....just had to have my kids authorize me again on Itunes.  Think it's a racket to keep upgrading, changing things and not supporting the stuff that still works.....my classic works just fine nd holds 5,000 songs...I only have about 1500; so I have long way to go.  When my display cracked and the LCD was all messed up. I sent it to IFIXIPODS fast.com and they replaced it, quick and cheap--hats off to them!

  • Did download of 3.6 12.took ages,and computor auto shut down when done how do i know if its installed?

    firefox indicated a new download version was advised.I indicated go ahead.the download took several hours and i checked every 1/2 hour
    but at 10.30 my computer had shut down.I cant find anywhere that tells me if it was applied? ah I see below i am on 3.6.10 still what should i do now?

    When you skip an update, as you did by missing the 3.6.11 update, Mozilla downloads the entire Firefox package which isn't compressed. You end up downloading ~10.4Mb instead of a ~2.4Mb update, or a full, compressed Firefox_setup package that's ~7.7Mb. Not a big deal if you have a hi-speed connection (about a minute or so to download ~10.4Mb), but it sounds like you are on dial-up connection. Unfortunately for you, the 3.6.12 version was released just a few days after 3.6.11 was released due to a security fix that wasn't known of at the time Mozilla decided to release 3.6.11 - very rare for a series of releases to occur that quickly, but it is reassuring that Mozilla can respond with a security fix in like 48 hours from notification of the problem to releasing the patched version to their users.
    My advice is to download the installer (Firefox_setup) and install it over your current 3.6.10 version. http://www.mozilla.com/en-US/firefox/

  • I replaced a previous ADE with ADE 4.0 today and now it shuts down when I attempt to copy a library book to my Kobo

    I replaced a previous ADE with ADE 4.0 today and after downloading a book from online library, I attempted to copy it to my Kobo E-Reader.  Each time I tried ADE shut down.  Thanks for any help you may provide.

    Thanks for the suggestions.  I did try version 3 before and that still did not work, but I will try it again.
    I did  take the Kobo down to my local library, and the helpful girl tried to get it working through Overdrive, but we hit a problem using the public computer, and as they were almost closing I just gave up for that day.  I said that if I went to see her again I would take my laptop, which she thought would be a good idea, although one problem seems to be that my laptop is Windows 7, and looking on the Overdrive website, it would appear that I need at least Windows 8 for the Overdrive to transfer Epub books, which creates another problem as Windows 7 and 8 are about to be superseded by Windows 10 in early 2015.
    Anyway thanks for the suggestions, and I will repost if I find an answer, also, I cannot believe how many people are having this problem.

  • I am having trouble with safari and most apps shutting down when I'm in the middle of stuff what do I need to do to resolve this?

    I am havering trouble with safari and apps shutting down on me all the time what can I do to resolve this problem. Thanks :-)

    Make sure you have enough free space on your iPad. With iOS 7 it is recommended that you have 15-20% of the storage space on the device free.  For a 16 GB device that is 2.4-3.2 GB free. For a 32 GB device that is 4.8-6.4 GB free. For a 64 GB device that is 9.6-12.8 GB free.
    Also try a reset. Press and hold the Home and Sleep buttons simultaneously until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.

  • HT1688 why am I getting appointments on my iPhone calendar that are in blue and they are not syncing with my Mac Book calendar?

    I started getting appointments I create on iphone 4s in blue instead of the green that is usual.  I am also noticing that these appointments that are in blue are not syncing with my other calendars on my other devices.  Icloud is enabled and calendars is checked.  This just started happening...

    Hello jricks8
    Check and see what calendar it is being added to. You may see it something that is local to the iPhone or another sync service that is not setup on your computer. Check out the page below to find out more information to sort you out.
    Use multiple calendars
    http://help.apple.com/iphone/7/#/iph3d1110d4
    Calendar settings
    http://help.apple.com/iphone/7/#/iph3d11102c
    Regards,
    -Norm G.

Maybe you are looking for