Is it possible to accept an incomming call automatically?

I am using my iPhone 4 or 5 while driving a car. Is it possible to accept an incomming call automatically?

Similar Messages

When I accept a incoming call face time says connecting but it cannot connect. Pls help me.

when I accept a incoming call face time says connecting but it cannot connect. Pls help me.

A slow Internet connection in between both parties is a typical reason for the connection taking "forever".

How to answer an incoming call automatically?

Yes, thas is. How can i answer a call automatically? (is possible?)
Thanks.

nemaji
Welcome to the forum. Please don't post in old threads that are long dead. When you have a question, please start a topic of your own. Feel free to provide a link to an old thread if relevant.
I'm locking this thread now. It's well over 1½ years old.
db

Which model still has menu with profiles for accepting certain incoming calls?

I have been using Sony Ericsson phones for 10 years - my first was a T15. If I could find one, I'd buy it today.
What current models have the menu system with multiple profiles and the ability to specify for each profile which callers and/or groups of callers are accepted?
Does any model still have the menu function to completely turn off the call list?
I use a mobile telephone for talking - I don't care about photos, music, internet, etc.
Thank you for your input.

Try the W595 or the W995.

Skype in - Receive incoming call to several phones

Hey,
With Skype business, is it then possible to recieve an incoming call to a group and then maybe 3 Skype phones rings at the same time, and the first one who picks up the phone receives the call.
Anyone, knows if its possible?
Thanks

While this may be possible, remember that as soon as the call is connected, no other activity can take place. Using Skype in this manner is not how Skype is intended to be used; I would recommend reviewing the Terms of Use before proceeding: http://www.skype.com/intl/en-us/legal/terms/tou/ and
http://www.skype.com/intl/en-us/legal/
Was your question answered? Please click on the Accept as a Solution link so everyone can quickly find what works! Like a post or want to say, "Thank You" - ?? Click on the Kudos button!
Trustworthy information: Brian Krebs: 3 Basic Rules for Online Safety and Consumer Reports: Guide to Internet Security Online Safety Tip: Change your passwords often!

2811(NM-8AM) does not answers incoming call from PC

Dear friends,
We are planning to setup an out of band management connectivity, in our test setup we have a Cisco 2811 ISR (with IOS 12.4(9)T5 ) with NM-8AM (Analog modem module) installed.
Test Setup:
1. One Analog line (PSTN) connected to PC via built-in modem
2. Second Analog line (PSTN) connected to Cisco 2811 (NM-8AM) terminated on the analog modem module
3. Both the analog lines are working fine.
Test Scenario:
1. The router should accept the incoming call from PC. And from the PC we should be able to telnet into the router via dial up connectivity (Out of band)
Test procedure:
1. The Cisco 2811 router is configured as follows:
version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
hostname Dial-Up-CPE
boot-start-marker
boot-end-marker
logging buffered 16384 debugging
enable password cisco
ip cef
voice-card 0
no dspfarm
username cisco password 0 cisco
interface Loopback0
ip address 10.10.10.1 255.255.255.255
interface FastEthernet0/0
ip address 20.20.20.1 255.255.255.0
duplex auto
speed auto
interface FastEthernet0/1
no ip address
shutdown
duplex auto
speed auto
interface Group-Async1
ip unnumbered Loopback0
encapsulation ppp
dialer in-band
dialer idle-timeout 600
dialer-group 1
async mode interactive
peer default ip address pool DIALIN
ppp authentication pap chap
group-range 1/0 1/7
ip local pool DIALIN 172.16.16.1 172.16.16.5
ip http server
no ip http secure-server
dialer-list 1 protocol ip permit
control-plane
line con 0
exec-timeout 0 0
line aux 0
exec-timeout 0 0
password cisco
modem InOut
transport input all
stopbits 1
speed 38400
flowcontrol hardware
line 1/0 1/7
modem InOut
transport input all
stopbits 1
flowcontrol hardware
line vty 0 4
password cisco
scheduler allocate 20000 1000
2. With the above configuration, the router is not able to answer the incoming call from the PC.
3. And from the PC we are able to dial to a PSTN number at the router side, PC gives a proper dial tone and once the number is dialed, the call is landed on the other side (router end) and it rings continuously. But, the router does not answer this incoming. The analog line at the router end is terminated on async interface 1/0.
As I am new to dialup connectivity with NM-8AM, Could some please suggest the proper configuration in our router configuration OR Are missing any commands?
Any links/references would be of great help.
Thank you
Pradeep

Hi,
I guess I'm having exactly the same setup. The integrated modem on the other end does pick up the call but soon disconnect after displaying "Waiting for carrier".
Any clue?
Thanks,
Eyad

CUCIMOC - Display Outlook contact information by incoming calls

Hi, is it possible to display some outlook contact information in CUCIMOC by incoming calls? Szenario: The customer's contact information are already added to the outlook contacts. By receiving a call from an external customer only the phone number is displayed, it would be helpful also to display p.e. the customer's name, photo, etc. Is it possible to check the incoming calls with the outlook contacts? Thanks for help.
Alex

Thanks for quick response.
What about configuring the information are displayed by incoming calls. The username and photo-uri are shown - is it possible to display some more / specific information from AD, p.e. units?
Thanks. Alex

7970 Phone UI - Autofocus call tab on incoming call

I 'm trying to auto-focus on call tab when a call income.
I need this feature because my customer often use the xml directory and if he left it open and pull the phone handset for answer the phone dial the directory number instead of answer.
Thanks

Auto Answer connects incoming calls automatically after a ring or two. Auto Answer works with either the speakerphone or headset. Choose one of the following options to activate the Auto Answer feature for the directory number:
Auto Answer Off
Auto Answer with Headset
Auto Answer with Speakerphone
Make sure that the headset or speakerphone is not disabled when you choose Auto Answer with headset or Auto Answer with speakerphone. Do not configure Auto Answer for devices that have shared lines.
You can also configure Auto-pickup. It allows a user to use one-touch, pickup functionality for call pickup, group call pickup, and other group call pickup.

Is possible to display Country Name in incoming calls?

Is possible to display Country Name in incoming calls? If number is saved with country code. Attached is the sample as i mean.

If you need one more column, then you need to expand the field catalog table and data table as you did for all other fields and you need to code the logic to calculate the subtotals and populate the new column, but if you want to have row, that will be easy. For more info you can [refer |http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/4063c42a-2549-2c10-fab6-a8c99d98b9b5?quicklink=index&overridelayout=true]this:

I teach Spinning- is it possible to stop incoming calls from interrupting the music?

I teach Spinning- is it possible to stop incoming calls from interrupting the music? I have the newest iphone.

Turn on airplane mode.
That turns off the cellphone network so no-one can call you.
Don't worry they will get diverted to the answerphone.

Possible Bug !? Incoming FXO Call Reboots all the phones !

System is simple enough.
3xSPA303G phones. 2xFXO trunk. 1xSIP trunk.
Nothing else !
Incoming call from FXO line goes to extension 101, she starts to talk than after a few seconds, the voice goes away. When she hangs up, all the phones reboot. Reason of reboot shows "SIP triggered" on all phones. This happens all the time and everytime there is a call from FXO.
Also when there is an incoming call from the FXO line and is forwarded to again ext 101, but Extention 100 <grpick> the call, there is no problem !
Logs are attached.
This problem is killing us. Someone please help !
Anyone ?
Cisco ?

Hi Dogus,
Could you please contact the Small Business Support Center at the phone number listed (Please pick the appropriate phone number in your region) in the link attached? One of our engineers should be able to assist you with this issue.
http://www.cisco.com/en/US/support/tsd_cisco_small_business_support_center_contacts.html
Best regards,
Wendy Yang

Is it possible to pick up an incoming call from an extension that is not physically ringing?

Is there a way to pick up an incoming call from an extension that is not physically ringing?
For example if an incoming call was ringing at EXT 1019 and they were away from their desk momentarily, could the call be picked up from another extension by pressing a number sequence or something?
we are using UC560. if you could tell in detail how it can be setup(config) and how it will work.Thank you in advance.

Please rate helpful posts.
Thanks,
Alex
Here is the inof for the Call Manager Express.
Enabling Call Pickup
To enable Call Pickup features on SCCP or SIP phones, perform the following steps.
Prerequisites
•SIP phones require Cisco Unified CME 7.1 or a later version.
•The PickUp and GPickUp soft keys display by default on supported SCCP and SIP phones. If previously disabled, you must enable these soft keys with the softkeys idle command.
Restrictions
•SIP phones that do not support the PickUp and GpickUp soft keys must use feature access codes (FACs) to access these features.
•Different directory numbers with the same extension number must have the same Pickup configuration.
•A directory number can be assigned to only one pickup group.
•Pickup group numbers can vary in length, but must have unique leading digits. For example, if you configure group number 17, you cannot also configure group number 177. Otherwise a pickup in group 17 is always triggered before the user can enter the final 7 for 177.
•Calls from H.323 trunks are not supported on SIP phones.
SUMMARY STEPS
1. enable
2. configure terminal
3. telephony-service
4. service directed-pickup [gpickup]
5. fac {standard | custom pickup {direct | group | local} custom-fac}
6. exit
7. ephone-dn dn-tag [dual-line | octo-line]
or
voice register dn dn-tag
8. pickup-group group-number
9. pickup-call any-group
10. end
DETAILED STEPS
Command or Action
Purpose
Step 1
enable
Example:
Router> enable
Enables privileged EXEC mode.
•Enter your password if prompted.
Step 2
configure terminal
Example:
Router# configure terminal
Enters global configuration mode.
Step 3
telephony-service
Example:
Router(config)# telephony-service
Enters telephony-service configuration mode.
Step 4
service directed-pickup [gpickup]
Example:
Router(config-telephony)# service directed-pickup gpickup
Enables Directed Call Pickup and modifies the function of the GPickUp and PickUp soft keys.
•gpickup—(Optional) Enables using the GPickUp soft key to perform Directed Call Pickup on SCCP phones. This keyword is supported in Cisco Unified CME 7.1 and later versions.
•This command determines the specific soft keys used to access different Call Pickup features on SCCP and SIP phones. For a description, see the service directed-pickup command in the Cisco Unified CME Command Reference.
Step 5
fac {standard | custom pickup {direct | group | local} custom-fac}
Example:
Router(config-telephony)# fac custom pickup group #35
Enables standard FACs or creates a custom FAC or alias for Pickup features on SCCP and SIP phones.
•standard—Enables standard FACs for all phones. Standard FAC for Park Retrieval is **10.
•custom—Creates a custom FAC for a feature.
•custom-fac—User-defined code to dial using the keypad on an IP or analog phone. Custom FAC can be up to 256 characters and contain numbers 0 to 9 and * and #.
Step 6
exit
Example:
Router(config-telephony)# exit
Returns to privileged EXEC mode.
Step 7
ephone-dn dn-tag [dual-line | octo-line]
or
voice register dn dn-tag
Example:
Router(config)# ephone-dn 20 dual-line
or
Router(config)# voice register dn 20
Enters directory number configuration mode.
Step 8
pickup-group group-number
Example:
Router(config-ephone-dn)# pickup-group 30
or
Router(config-register-dn)# pickup-group 30
Creates a pickup group and assigns the directory number to the group.
•group-number—String of up to 32 characters. Group numbers can vary in length but must have unique leading digits. For example, if there is a group number 17, there cannot also be a group number 177.
•This command can also be configured in ephone-dn-template configuration mode and applied to one or more ephone-dns. The ephone-dn configuration has priority over the template configuration.
Step 9
pickup-call any-group
Example:
Router(config-ephone-dn)# pickup-call any-group
or
Router(config-register-dn)# pickup-call any-group
Enables a phone user to pickup ringing calls on any extension belonging to a pickup group by pressing the GPickUp soft key and asterisk (*).
•The ringing extension must be configured with a pickup group using the pickup-group command.
•If this command is not configured, the user can pickup calls in other groups by pressing the GPickUp soft key and dialing the pickup group number.
Step 10
end
Example:
Router(config-ephone-dn)# end
or
Router(config-register-dn)# end
Exits configuration mode.
Examples
The following example shows the Group Pickup and Local Group Pickup features enabled with the service directed-pickup gpickup command. Extension 1005 on phone 5 and extension 1006 on phone 6 are assigned to pickup group 1.
telephony-service
load 7960-7940 P00308000500
load E61 SCCP61.8-2-2SR2S
max-ephones 100
max-dn 240
ip source-address 15.7.0.1 port 2000
service directed-pickup gpickup
cnf-file location flash:
cnf-file perphone
voicemail 8900
max-conferences 8 gain -6
call-park system application
transfer-system full-consult
fac standard
create cnf-files version-stamp 7960 Sep 25 2007 21:25:47
ephone-dn 5
number 1005
pickup-group 1
ephone-dn 6
number 1006
pickup-group 1
ephone 5
mac-address 0001.2345.6789
type 7962
button 1:5
ephone 6
mac-address 000F.F758.E70E
type 7962
button 1:6

Can accept incoming calls but cannot make outgoing...

So I've been in this one skype group for a few months, and everything's been fine up until this point. What's happening is that I try to call the group, which I've never had a problem doing, but it just keeps calling and calling and no one receives it. I can't end the call either, I have to wait until it finishes "trying" to call. I can receive incoming calls with no problem though.
I've also been having a small problem every now and then where I lag out of a call, and I know this has nothing to do with my internet because everything else is working perfectly fine.
I have Windows 7, do not have the latest version of skype because I don't like it at all... And I know that can't be the problem because the older skype's been working fine for years. I'm not sure what could be causing this problem now, but if anyone could suggest something I can do to fix it (without updating skype), I'd be really grateful.

Posted: Nov 25, 2010 5:17 PM
If your facetime does not work and you don't see the facetime button when you try to initiate a call try texting yourself. Sometimes your phone company has deactivated your text messaging when you hook up your new Iphone 4. Phone them and get it reactivated and it will work. You need three things to activate facetime. 1. Cell phone service (naturally) 2. connection to a router (wifi) and 3. text messaging that works. A text message is sent to complete the connection.
Have a great day and enjoy facetime.
Wayne Howkins

Incoming calls sound like chipmunk voice/ outgoing my voice is very deep

I am new to this forum in real need of help. I guess this occured because my son played with my phone, but now about 90% of the time the incoming calls sound very high pitched (even the ringtone and voicemail messages) and when I answer the phone people think it is someone else (a man). I have not been able to figure out how to fix it and when I called AT &T they could not help. I do appreciate any advise on how to fix this without redoing all my settings (if possible). Thanks in advance!

Another option could be trying to reinstall the device OS. Click here to know how to upgrade device OS.
tanzim
If your query is resolved then please click on “Accept as Solution”
Click on the LIKE on the bottom right if the post deserves credit

How to set it so voice recordings aren't interrupted by incoming calls

So, recently when I've been recording with the voice memos, and a text or an incoming call comes in, it INTERRUPTS THE VOICE RECORDING. Why would I possibly WANT this, Steve Jobs?
The other day, I was recording a performance I was doing on stage. I got a text from a friend saying "I'm not going to make it to your performance. Sorry." And my recording was interrupted. Of course, I didn't notice until I got down off the stage. Big dissapointment.
Is there a simple preference to be set for, like, "Don't let voice memos get interrupted"? Check!
Thanks for your help

Battletard wrote:
INTERRUPTS THE VOICE RECORDING. Why would I possibly WANT this, Steve Jobs?
Steve doesn't make the iPhone himself.
Nor is he in the user forum.... well he could be but I haven't seen him.
The reason it interrupts is because the iPhone is a phone.
And the main function is .... a phone.
Anything phone related pops in front of any other app.
So as gdgmacguy suggest, if you want to turn off phone features for a while the activate Airplane mode.
Which would probably be also the correct setting if your phone is where there is a performance.
Have some respect for the other performers; you would be unhappy if someone got a call during your performance right?

Is it possible to accept an incomming call automatically?

Similar Messages

Maybe you are looking for