Is it possible to access the Windows 2003 guest VM from the VM Server?

Hi,
I have only one physical machine. I install VM server and VM Manager (using the VM Manager template) on the same physical machine. Then I create aa guest VM for Windows Server 2003. Can I run Windows Server 2003 in GUI mode like guest VM using VMWare Workstation? This setup is strictly for learning and I don't want to get another PC in order to access Windows 2003. If it is possibl, what other software must I install on the VM Server (Dom0) in order to for this to work?
Thanks for your assistance.
Phil

djplee88 wrote:
Can I run Windows Server 2003 in GUI mode like guest VM using VMWare Workstation? No, you can't. There is no way to show the GUI of a guest from the console of Oracle VM Server. You will need another machine.

Similar Messages

** Is it possible to run a windows .bat script job from ODI between server?

Hello Friends,
We have ODI 10.1.3.5 on a Win2003 Server.
Have a windows Batch script job .bat(this is a related to a different program - DRM) on a different Windows 2003 server...is it possible to execute .bat job thru ODI between servers?
Appreciate your suggestions...
Thanks.

Hi AJ,
Here are more details:
Server-A: ODI Server (Win2003)
Server-B: Oracle DRM Server (Win2003)
Server-C: ODI scheduler agent is installed (Linux)
We have a .bat batch script job on Server-B which we are planning to run from Server-A (as part of the ODI package execution flow)
This .bat job exports the DRM hierarchy data to a table that ODI uses to process next steps.
So, you are suggesting to install ODI agent on Server-B? If we do that...not sure if there be issues if we have to run the package with other scenario's (interfaces/Procedures) that refer agent isntalled in Server-C??
Any feedbacks are appreciated!!
Thanks

Is it possible to access the http web interface over the fa1 management interface?

Hello All,
    I am remotely connected into a Cat 4500 + Supervisor V module via console cable and point to point connection from laptop to fa1 management interface on SupV. SupV module is running IOS 15.0(2)SG8.
    I am not able to physically change the patch cable from fa1 management interface to gi2/3 or any other switch port for a couple days and would like to see if it is possible to access the http server through this fa1 port since I am working remotely. I can ping the laptop from fa1 and tftp ok but cannot access the http/https server. Is this even possible without connecting the laptop into a regular switch port like gi 2/3 gi 2/4 etc..? The reason I ask is I would like to use Cisco Networking Assistant gui for some things but need access to https server first over the fa1 link.
Any suggestions would be much appreciated.
Thanks!
-S

Here is the ACL list. I have not made any entries into this list and all of these are default at this time. Do I need to make an explicit allow ACL for http?
Thanks!
-S
#show access-list
Extended IP access list system-cpp-all-routers-on-subnet
    10 permit ip any host 224.0.0.2
Extended IP access list system-cpp-all-systems-on-subnet
    10 permit ip any host 224.0.0.1
Extended IP access list system-cpp-dhcp-cs
    10 permit udp any eq bootpc any eq bootps
Extended IP access list system-cpp-dhcp-sc
    10 permit udp any eq bootps any eq bootpc
Extended IP access list system-cpp-dhcp-ss
    10 permit udp any eq bootps any eq bootps
Extended IP access list system-cpp-energywise-disc
    10 permit udp any eq any eq 0
Extended IP access list system-cpp-hsrpv2
    10 permit udp any host 224.0.0.102
Extended IP access list system-cpp-igmp
    10 permit igmp any 224.0.0.0 31.255.255.255
Extended IP access list system-cpp-ip-mcast-linklocal
    10 permit ip any 224.0.0.0 0.0.0.255
Extended IP access list system-cpp-ospf
    10 permit ospf any 224.0.0.0 0.0.0.255
Extended IP access list system-cpp-pim
    10 permit pim any 224.0.0.0 0.0.0.255
Extended IP access list system-cpp-ripv2
    10 permit ip any host 224.0.0.9
Extended MAC access list system-cpp-bpdu-range
    permit any 0180.c200.0000 0000.0000.000c
Extended MAC access list system-cpp-cdp
    permit any host 0100.0ccc.cccc
Extended MAC access list system-cpp-cgmp
    permit any host 0100.0cdd.dddd
Extended MAC access list system-cpp-dot1x
    permit any host 0180.c200.0003
Extended MAC access list system-cpp-lldp
    permit any host 0180.c200.000e
Extended MAC access list system-cpp-mcast-cfm
    permit any 0180.c200.0030 0000.0000.000f
Extended MAC access list system-cpp-pppoe-disc
    permit any any protocol-family pppoe-disc
Extended MAC access list system-cpp-sstp
    permit any host 0100.0ccc.cccd
Extended MAC access list system-cpp-ucast-cfm
    permit any host 000d.6558.d5fd

A fatal error when attempting to access the SSL server credential private key. Error code 0x8009030d. Windows 8.1.

Hi,
We develop a server-side application which receives incoming https connections using self-signed certificate. It was all ok while we were using Windows 7 or Windows 2008 as OS, but when our clients started installing Windows 8 as server OS they encountered
big problem: application got unavailable in few hours after start.
In event logs we have following:
A fatal error occurred when attempting to access the SSL server credential private key. The error code returned from the cryptographic module is 0x8009030d. The internal error state is 10001.
After restart, application recreates certificate and all works normal few hours till next fatal error.
This
article did not help us. And I repeat that this error appears only on Windows 8 (we tested on Windows 8.1). Windows 2012 Server we did not test yet.
How we can solve this problem?
Best regards.

Hi,
Since this article released in 2008,I suspect the code mentioned in this article doesn't supprot Windows 8.
And since the certificate was written by C#,I suggest you submit a new case on MSDN Forum as they will be more professional on your issue:
https://social.msdn.microsoft.com/Forums/en-US/home
Regards,
Kelvin hsu
TechNet Community Support

Is it possible to administer the license server from a remote computer?

NI VLM and the license server service are running on a license server machine. Company policy prevents me from having admin access to the machine (which seems necessary in order to run NI VLM). Is it possible to administer the license server service from a remote machine? i.e., can I install NI VLM on a machine that is not the license server, but connect to and manage the license server service over the network? I can access the license server via RDP, but without admin access, I can't get very far.
Is there any other way to manage the VLM without admin access to the machine it is running on?
Thanks,
Chris

Hey Chris,
I haven't heard of a case where someone was able to administer licenses via VLM without having administrator access. Is there any possibility of getting administrator access on the license server machine, even if it's through some sort of temporary account?

Error in Accessing the Report Server URL

Hi All,
I am trying to access the Report Server URL in PowerPivot.But facing below issue .Can any one help me how can I solve the issue
Thanks,
Sid

Hi Visakh,
Yes,The user is holding the permission as "Global User" in sql.Hope you help me in solve this issue
Thanks, Quality Communication Provides Quality Work. http://siddiq-sharepoint2010.blogspot.in/ Siddiqali Mohammad .
Hi siddiqali,
According to the screenshot you posted above, the use account didn't have sufficient permission to open the report, please check the following prerequisites before you perform the action:
You must use a report definition (.rdl) file as a data source. Importing from a report model is not supported.
You must have permission to open the report under your Windows user account, and you must know the address of the report or the report server that hosts it. You can check your permissions by trying to open the report in a Web browser first.
If the report opens, it confirms that you have sufficient permissions and the correct URL.
Reporting Services must be version SQL Server 2008 R2 or SQL Server 2012. Those versions include the data feed export feature that streams report data in the XML data feed format. You can identify the report server by the Export as Data Feed option
that appears in the report toolbar when you open the report in browser:
For detail information, please see:
Import Data from a Reporting Services Report:
http://technet.microsoft.com/en-us/library/gg413491.aspx
Regards,
Elvis Long
TechNet Community Support

Can T3Client access the WebLogic Server Workspace.

Hi,
a couple of questions ....
Can the T3Client access the Weblogic Server Workspace ???
If so,how ???
The reason for this that I want to get access to the Weblogic Server Cache.
Is there any other way of getting access to the WebLogic Server Cache ???
Kindly let me know if you find the answer.
Thanks & regards,
Karan.

Hi there,
I would recommend taking a look at the troubleshooting steps found in the article below.
iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
http://support.apple.com/kb/ts1814
-Griff W.

Error: "Cannot access the web server" with BlazeDS Turnkey

Help! I'm new to Flex and BlazeDS and Eclipse. I was trying to setup a Flex Project using a BlazeDS/Tomcat server running from Eclipse on Windows XP per the example in flexbandit.com/archives/55#comment-269 and in (www.infoq.com/articles/blazeds-intro).   I am NOT using the Eclipse Flex plug-in. I'm using Flex Builder for the Flex code.
Here's what I've done:
I installed BlazeDS and tested http://localhost:8400 - That worked.
I setup Tomcat in Eclipse. - That seemed to work.
I created a Dynamic Web Project in Eclipse - That seemed to work.
I created the bare-bones BlazeDS Configuration under the Eclipse project and then created a basic HelloWorld java class.
I added the destination in the “remoting-config.xml” file found in the c:/projects/workspace/ReportGenTool/WebContent/WEB-INF/flex” directory:
<destination id="HelloWorld">   <properties> <source>HelloWorld</source> </properties> </destination>
When I started the application server by clicking on the server's green play button in Eclipse and then tried to open localhost:8400/ReportGenTool, I got the 404 error : The requested source (/ReportGenTool/) is not available which according to the instructions is fine.
Next I created a Flex Project, but when I try to validate the new Flex project configuration, it gives me an error "Cannot access the web server. The server may not be running, or the web root folder or root URL may be invalid."
When I validated the server was running after setting up the BlazeDs Turnkey, I saw the BlazeDS page.
Now when I bring up http://localhost:8400 I get:
      Directory Listing for /
      Apache Tomcat/6.0.14
My eclipse project is named ReportGenTool and I've overwritten the WebContent directory with the META-INF and WEB-INF directories from the BlazeDS installation (C:\blazeds\tomcat\webapps\blazeds). According to Eclipse the server is running.
My Flex project is named ReportGenTool and is located in another directory away from the Eclipse project directory.
     My root folder is: C:\Projects\workspace\ReportGenTool\WebContent
     Root URL: is http://localhost:8400/ReportGenTool/
     Context root is: /ReportGenTool/
Any idea what might be wrong? What didn't I configure that needs to be configured?
Thanks in advance.

This is not working because your router has a direct to your web server that is not through the outside interface which is needed for nat to occur, for this to work you need to setup a loopback interface as nat outside and policy route traffic to there for your server traffic
Bu if your server is internal why do you need nat at all? Can you not use bind with views that might be simpler
M
Sent from Cisco Technical Support iPad App

How to access the Terminal Server on a Macintosh computer

Hi everyone,
Actually i have a Macintosh Computer Os X v.10.8.5
i have tried to acess the Terminal Server with 2 methods:
1) The 1st method: i tried the application: "Microsoft Remote Desktop client 2.1.1" but il doesn't work at all. It appears: "impossible to connect"
2 The 2nd method: i downloaded the application "Microsoft Remote Desktop app 8.0.3" from itunes.
I filled all configurations but when i tried to connect, i had a black screen with "Connecting" in the middle of my screen and nothing else happened.
I need your help please, someone who use an access the Terminal Server on a Macintosh
(Computer Os X v.10.8.5 or later)
All suggestions are welcome
Thanks a lot
Minh VAN-TRAN
e-mail: [email protected]

What are you trying to remote desktop to? A Windows PC?
Are you able to ping the computer you are trying to connect to using RDP?
You can use the in-built network tools on OS X to Ping the target computer.
If you cannot ping the target then this could indicate either:
There is an incorrectly configured firewall on the target machine that isn't configured to allow incoming RDP
You don't have network access to the target machine.
If the target machine is Windows based Check the Remote options are as below:
Try to configure the connection properties using the target machines IP address rather than Hostname.
If you get just a blank screen i have seen this in the past where that is the mac struggling to resolve the target computer details but this is over a VPN to my work place, reconnecting the VPN resolves this every time though.

Configure Synchronization Connections An error has occurred while accessing the SQL Server database

Hi,
i am getting following error message
Central Administration --> Synchronization Connections
An error has occurred while accessing the SQL Server database or the SharePoint Server Search service.
If this is the first time you have seen this message, try again later. If this problem persists, contact your administrator.
Central Administration --> Manage Profile Service: User Profile Service Application --> Manage User Properties
Error
An unexpected error has occurred.
Troubleshoot issues with Microsoft SharePoint Foundation.
Correlation ID: 3bce5a11-f2dc-4788
Please tell how to fix it.
iffi

Event ID 5555 -> i have change the Timer jobs recycling time AM to PM
for User profile page not display number of count in the page first check services , connection ,
IISRESET /NOFORCE / timer services restart
Deepesh Yevle MCTS

Server 2012 R2 SMB - The process cannot access the file '\\server\share\test.txt' because it is being used by another process.

Hi,
We are having issues with Server 2012 R2 SMB shares.
We try to write some changes to a file, but we first create a temporary backup in case the write fails. After the backup is created we write the changes to the file and then we get an error:
The process cannot access the file '\\server\share\test.txt' because it is being used by another process.
It looks like the backup process keeps the original file in use.
The problem doesn't always occur the first time, but almost everytime after 2 or 3 changes. I have provided some code below to reproduce the problem, you can run this in a loop to reproduce.
The problem is that once the error arises, the file remains 'in use' for a while, so you cannot retry but have to wait at least several minutes.
I've already used Process Explorer to analyze, but there are no open file handles.
To reproduce the problem: create two Server 2012 R2 machines and run the below code from one server accessing an SMB share on the other server.
Below is the code I use for testing, if you reproduce the scenario, I'm sure you get the same error.
We are not looking for an alternative way to solve this, but wonder if this is a bug that needs to be reported?
Anybody seen this behavior before or know what's causing it?
The code:
string file =
@"\\server\share\test.txt";
if (File.Exists(file))
File.Copy(file, file +
".bak", true);
File.WriteAllText(file,
"Testje",
Encoding.UTF8);
The error:
System.IO.IOException: The process cannot access the file '\\server\share\test.txt' because it is being used by another process.

Hi,
There is someone else having the same issue with yours. You could try code in the article below:
“The process cannot access the file because it is being used by another process”
http://blogs.msdn.com/b/shawncao/archive/2010/06/04/the-process-cannot-access-the-file-because-it-is-being-used-by-another-process.aspx
If you wonder the root cause of the issue, the .NET Framework Class Libraries forum can help.
Best Regards,
Mandy
If you have any feedback on our support, please click
here .
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Error while accessing the application server file

Hello,
When I try to load the data from CSV file to PSA , I am getting following error message
"Error while accessing the application server file"
"Errors in source system"
I gave the right file path
I am not sure about this error message.
Thanks,

Hi ram,
if you have more than one application server running in your BI system (see at transaction SM51) be aware that your infopackage will be executed on the right one. Each application server has its own file system and your job need to run on the server your file is stored on.
Also check if the os user of the SAP system itself (<sid>adm on Unix) has rights to read that file.
Bye
Frank

My itunes library was on my PC. About two years ago I switched it to my Seagate server/hardrive. (itunes-preferences-advanced-change library). Last summer (2012) I bought a macbook, which seems to access the seagate server hard drive fine for word docs,

My itunes library was on my PC. About two years ago I switched it to my Seagate server/hardrive. (itunes-preferences-advanced-change library). Last summer (2012) I bought a macbook, which seems to access the seagate server hard drive fine for word docs, excel spreadsheets,etc. It also seems to have started its own library which is not complete. My PC died this summer (I still have it though).
Now when syncing any of the multiple devices (ipods,ipads, iphones) that we have with my mac book, itunes states that "an error occurred" or the "app cannot be found". Itunes wants me to erase the device and sync with my macbook. The message "The iPhone “Renee’s iPhone” is synced with another iTunes library on “Renee PC”. Do you want to erase this iPhone and sync with this iTunes library? An iPhone can be synced with only one iTunes library at a time. Erasing and syncing replaces the contents of this iPhone with the contents of this iTunes library."appears.
Any assistance would be greatly appreciated.
Renee

u can give try to using external enclosre and backup ur files. I hope u will get files back. or using external enclosre with ur hdd boot into Linux and try to mount ur harddisk.
there are multiple no of tutorial to mount apple partion in Linux.

Unble to access the JNDI server in J2EE 1.4 RI ...

Hi,
the following code can be used to access the JNDI "server" included in the J2EE 1.3 RI, from a client placed at anywhere (you also must include the j2ee.jar in the classpath at runtime) :
Hashtable env = new Hashtable();
env.put(Context.INITIAL_CONTEXT_FACTORY, "com.sun.enterprise.naming.SerialInitContextFactory");
env.put(Context.PROVIDER_URL,"serverhost:1098");
Context ctx = new InitialContext(env);
The same does not happen with J2EE 1.4 RI.
1) Does anybody know how to configure the JNDI properties in order to access the JNDI server included in the J2EE 1.4 RI?
2) Also, what Jars do we need to include?
Thank you in advance,
Dani Mazzuca

Hi Dani,
The preferred way for a standalone java client to access EJBs in the J2EE SDK is to use
the no-arg InitialContext constructor : "new InitialContext()".
In addition, set the -Dorg.omg.CORBA.ORBInitialPort=<orb port> (default is 3700
but check domain.xml to verify) property when invoking the client VM.
Keep in mind the reason there are differences in the setup for these
clients is they are not portable. J2EE has a client component called
an Application Client that is portable. In an application client, your code
runs in a 1st-class J2EE container, so the container can take care of
connecting to the appropriate naming service.
--ken

What are the different ways in accessing the SQL server from NWDS ?

Hi Experts,
Can anyone suggest the different ways for accessing the SQL server from NWDS.I also want to know whether any tool is available for accessing SQL server from Webdynpro java application in Netweaver development studio.
I am currently using JDBC driver for accessing the SQL server from Webdynpro java application in NWDS.
Regards,
Krishna Balaji T

Note - that no internet backup service has been proven to be safe and effective for backing up the iPhoto library - unless you personally have backup uyp an iPhoto library and restored it sucussfuly form one it should not be recommended - a large number of people have lost their photos trying it
LN

Is it possible to access the Windows 2003 guest VM from the VM Server?

Similar Messages

Maybe you are looking for