Is it possible to add pic/diagram to SP file with link to another SP file?

Hi,
Is it possible to add a diagram, picture, or table to a SP file with link to another SP file?
I know this is possible in, say, Word. For example, I can add a diagram and check a box to include a link to the source file - so that when the diagram in the source file updates, the diagram in my document also updates.
This is also my goal in SP - instead of simply including a link to a document elsewhere in SP (or on the same site in SP), I would ideally like to display a diagram, picture, or table and include (behind the scenes if possible) to the source SP file
so that, when the diagram/table in the source SP file updates, my SP file also updates accordingly.
For example:
Instead of:
       The diagram is located in:
       link
I would ideally like:
       Diagram, picture, or table (with link associated with it) - users can click on the diagram or picture if they desire.
       The diagram or picture is updated whenever the source SP file containing the diagram or picture is updated (the source SP
       file will only contain a diagram, picture, or table)
Any suggestions are welcome.
Thank you very much.

Is it possible to add a diagram, picture, or table to a SP file with link to another SP file?
I know this is possible in, say, Word. For example, I can add a diagram and check a box to include a link to the source file - so that when the diagram in the source file updates, the diagram in my document also updates.
This is also my goal in SP - instead of simply including a link to a document elsewhere in SP (or on the same site in SP), I would ideally like to display a diagram, picture, or table and include (behind the scenes if possible) to the source SP file so that,
when the diagram/table in the source SP file updates, my SP file also updates accordingly.
For example:
Instead of:
       The diagram is located in:
       link
I would ideally like:
       Diagram, picture, or table (with link associated with it) - users can click on the diagram or picture if they desire.
       The diagram or picture is updated whenever the source SP file containing the diagram or picture is updated (the source SP
       file will only contain a diagram, picture, or table)
Any suggestions are welcome.
Thank you very much.

Similar Messages

  • Is it possible to add a string inside a textbox with a value of another textbox for Acrobat Forms?

    Is it possible to add a string inside a textbox with a value of another textbox?
    ex.
    Textbox1 = Happy
    Textbox2 = Sad
    Textbox3 = "I am Happy therefore I am not Sad"
    "I am (value of textbox1) therefore I am not ( value of textbox2)"

    Use this code as the custom calculation code of Textbox3:
    event.value = "I am " + getField("textbox1").value + " therefore I am not " + getField("textbox2").value;
    Notice that the field names are case-sensitive.

  • Is that possible to add one chracteristic which is in one cube to another cube which doesn't have that ?

    Hi Experts,
    Is that possible to add one chracteristic which is in one cube to another cube which doesn't have that ?
    I want to do it with out using a multiprovider or virtual cube.
    The scenario is ,
    I have two cubes -Z_XXX;Z_YYY
    Now Based on the client's requirement,(i.e. a report development) I can get all the chracteristics and key figures from cube Z_XXX except one key figure.
    Now that keyfigure is available in the other cube (Z_YYY).
    Now I want to add this particular characteristic in this Z_XXX cube & I don't want to use multiprovider or something like that.
    Please help me.

    HI Sumit,
    Please find the link containg all details :
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b00ddebe-cc48-2b10-758a-8008e63d6826?QuickLink=index&…
    Also , in case it is an attribute of existing characteristic, make it navigational and it will be avaible in Cube, just check the check box for same.
    Thanks and Regards,
    Amit.

  • Not possible to add a new call in agenda with N97 ...

    I can not add a new call in the agenda, I dont understand if is a limit of N97 mini. It's a strange situation because with all my previous Nokia phone that was possible.
    It's a very usefull function because I can start the call directly with alert starting.
    Any trick to do this?

    Not ever noticed or used this feature , but if you set a reminder with the telephone number in it and have number search activated in messaging (so numbers are highlighted) you could tap on the number and be given the option to call !
    If I have helped at all, a click on the White Star is always appreciated :
    you can also help others by marking 'accept as solution' 

  • Is it possible to set validation on a form field with data from another field in Adobe Acrobat?

    Thanks in advance for any help and advice. I am trying to set a validation for one field that would make sure that the amount entered is 25% of a different field. I tried setting up a validation, but have been unsuccessful. Can anyone offer any insight or solution? Thanks!

    You'll need to use a script to do it. Something like this should do:
    if (event.value) {
         event.rc = true;
         var v1 = +this.getField("NameOfOtherField").value;
         if (+event.value!=(v1*0.25)) {
              app.alert("The value you entered must be 25% of the value of NameOfOtherField.");
              event.rc = false;
    (This will check if the entered value is exactly 25% of the other value... If you meant something else, please clarify)

  • PI Sheet : Is it possible to Add Phase or Operation Text?

    Hi Experts,
    Is it possible to add phase or operation text along with phase number?
    We are using browser base PI sheet and in the begining of the frame PI sheet shows phase number automatically like " Phase0101". Is ther any way to add short text of the phase instead of phase number or both?
    This will really  make my life easy.
    Thanks in anticipation.
    Kind Regards
    RajaRam

    In 013c defining process message category for process characteristic include standards characteristics of PP_PI Operation, PP-PI Operation text, PP-PI Phase, PP-PI Phase text also as characteristics,
    After this when defing PI category 012c these characteristic appear along with process message charectestic.there define these as output characteristics. This will display phase no, phase text, operation no, operation text each time respective Process characteristic is recorded.

  • Metadata or hotspot with link, when i clik on 3D part, it is possible?

    is there a way to put a link in metadata or hotspot? with SAPlink? hotspot are valid only for 2d? not 3D? if i use the note it's ok, cgm ok...
    in VEAuthor it is possible to add a metadata or hotspot with link to another file on web or local system? when i clik on the part, can i see the link in metadata windows or information tab, in viewer and mobile?
    others ideas?

    uninstalled firefox ....deleted all files still remaining under mozilla firefox directory in program files ... to avoid having to reprogram all my settings, reisntall all addons as well .. I did not remove anything from mozilla firefox that is stored in either appdata or under the windows users directory (if any)
    ... the as suggested reinstalled the latest version of the firefox browser using the link you provided in the email ..; tested and several issues still remain present and unresolved ....
    so please this is urgent or I will have to jump browsers and start using chrome .. because we work 14 hours a day 6 (sometimes 7) days a week, to get ready for the launch of our newest venture and we cannot lose that much days on browser related issues ... so please instead of putting me through week long step process .. of do this .. do that .. can you please actually look into the issue from your end .. I use firefox for so many, many years thta I deserve this kind of support .. thnx Robert

  • Add Pic to a playlist?

    Is it possible? The album pic, only shows at the first track.
    So be able to add pics to a playlist would be great
    Someone who knows it is possible?
    Sorry for my bad English :P
    Hope for answers soon

    Do you mean that the album art only shows up in the first track? You have to add it to each track. Be sure the track is actually playing and then add the art. Sure is slow but your coverflow will have all it's pictures. If you put the wrong album art you can delete it by pressing control(apple) i which will bring up the get info window. Select Album Art and select the picture in that window. You will then be able to delete the art.

  • Is it possible to add second cooler to my QOSMIO

    I WOULD LIKE TO ASK IF IT IS POSSIBLE TO ADD THIS SECOND COOLER TO MY LAPTOP *(TOSHIBA QOSMIO-X300 130) BECAUSE MY LAPTOP SHUTSDOWN WHEN I PLAY GAMES..
    *PIC ABOUT WHAT I MEAN.. *http://www.irisvista.com/tech/laptops/Toshiba-Qosmio-X305/big/removing-laptop-motherboard-33.jpg
    AS I SEE YES BUT WHERE CAN I FIND SUCH A COOLER IN YM COUNTRY (BULGARIA)
    EVRYTHING STILL IN GUARRANTY
    Message was edited by: aloushi

    I think you should discuss about this with Toshiba service in your country.
    I presume they can explain to you what can be done and what is not possible to do.
    I also think they can explain to you which parts can be added and what kind of upgrade cannot be done.
    You found some US page on the net and this nice pic and now you think you can do the same on your Qosmio. This is pic of Qosmio X305 produced for US market. Do you have the same notebook model?
    Do you think all Qosmios X300 have identical mainboard with 100% identical construction?

  • Is it possible to add markups to a PDF that I am not the author of

    Most of the PDFs I generate are from other applications (like Autocad) where I "print to PDF" to create the file.   Most of the PDFs I recevie are generated the same way.   Prior to Acrobat Reader 8, it was simple for me and my collueges to exchange information on these PDFs by using markup tools and resending them with markups.   Since Acrobat 8 has come along, I now find it impossible to markup a drawing (no matter if I have created it using Print to PDF or if someone has sent it to me).  I went to the knowledge base and see that the drawing has to be enabled for markup in one of 2 ways
    In an open PDF, choose Comments > Enable For Commenting In Adobe Reader, and then save the PDF.  
    Start the wizard to initiate a shared review or an email-based review and follow the on-screen instructions. When you’re finished, commenting is enabled in the PDF that you specify for the review. 
    Well, there is no Comments selection in my toolbar.   Second method is given by
    Quickstart: Start an email review
    An email-based review lets you track review status and merge received comments into the PDF.
    Click Review & Comment and choose Attach For Email Review.
    If prompted, enter your identity information to create a reviewer profile.
    Follow the on-screen instructions to select the PDF, invite reviewers, and send the email invitation.
      If your email application doesn’t send email automatically, you may need to answer alert messages and switch to your email application to finish sending the message
    But there is no Review & Comment button to click.
    So, can someone tell me, can I still do a simple markup of any PDF?   Even if I have to jump through hoops can I?    I guess I can understand Why Adobe has done away with this feature in their free tool, as they were not getting any revenue off of it, but it greatly diminishes the usefulness of Acrobat Reader and therefore all PDFs for me.
    Thanks in advance for your response.

    To enable this right you need Acrobat, not the free Reader.
    However, starting from Reader X it is possible to add simple markups to any file, unless it has been specifically disallowed by the creator of the file.

  • In contacts there is the possibility to add a new event, as the birthdays, but they do not appear in iCal. Is there any way to make that possible? It is normal to have a person with his birthday, anniversary and others key dates you want to link to him.

    In contacts there is the possibility to add a new event, as the birthdays, but they do not appear in iCal. Is there any way to make that possible? It is normal to have a person with his birthday, anniversary and others key dates you want to link to such person, but the only one shows up is the birthday. How to be able to show all those dates linked to people in the agenda in the iCal?
    Thanks

    Hi,
    I sugggest you try my application, Dates to iCal. It is shareware with a 2 week trial period.
    Dates to iCal 2 is a replacement for Apple's birthday calendar for iCal. It has a range of features to allow the user to choose what, and what not, to sync to iCal from Address Book.
    As well as automatically syncing birthday dates from Address Book, Dates to iCal 2 can sync anniversary and custom dates. It can set up to five alarms for each date in iCal and can also set different alarms for birthdays and anniversaries. It allows the option of only syncing from one Address Book group. This application also allows for the titles of the events sent to iCal to be modified to the user's preference.
    Best wishes
    John M
    As I sell software on my site and ask for donations, the Apple Support Communities Use Agreement requires that I state that I may receive some form of compensation, financial or otherwise, from my recommendation or link.

  • Is it possible to add a graphics card to the back of my HP

    Hello  I want to know if it's possible to add a new graphics card to the back of a Laptop not inside of it but on the back of my laptop ???  my graphics Card is a Intel 4000 graphics card is a terrible for gaming TERRIBLE !!!  

    Not sure where it would go on the back, but no the system is closed. There is no place to insert a graphics card or attach it. You will find some hokey stuff on the internet where people say you can plug a video card in the wireless card slot but those are a hoax at worst and at best they do not tell you that such a thing would not even perform as well as what you have and is likely to damage the motherboard. 

  • Is it possible to add a backlit keyboard to an hp envy touchsmart 15

    is it possible to add a backlit keyboard to an hp envy touchsmart 15?

    Daevid.
    Yes you can.
    Your manual here.
    http://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=1&cad=rja&uact=8&ved=0CB8QFjAA&url=http...
    Page 20 chapter 3.
    REO
    HP Expert Tester "Now testing HP Pavilion 15t i3-4030U Win8.1, 6GB RAM and 750GB HDD"
    Loaner Program”HP Split 13 x2 13r010dx i3-4012Y Win8.1, 4GB RAM and 500GB Hybrid HDD”
    Microsoft Registered Refurbisher
    Registered Microsoft Partner
    Apple Certified Macintosh Technician Certification in progress.

  • Is it possible to add a hdmi port? Hp envy 23-d010ea all-in-one

    I wanted to get a Ps4 soon but i dont have a tv, and on my computer i dont have a hdmi port. i see on other models of my computer they have it for example on the 23-d052 its like this 
    Where as on my one is like this
    so that part is just an empty space. i was wondering if it were possible to add the hdmi port or if there was a way i could still play the ps4 on my computer?
    This question was solved.
    View Solution.

    The USB 3.0 to HDMI adapter referenced above, is only designed to connect to a USB port on you computer and output an HDMI signal to an HDTV or monitor. It will not allow you to connect the HDMI output of a game console to your computer.
    It may be possible to purchase all the components necessary to add that functionality to your computer, however the cost would far exceed the price of a new monitor or HDTV. Please purchase an inexpensive HDTV or monitor to use with your PlayStation.
    If you have any further questions, please don't hesitate to ask.
    Please click the White KUDOS "Thumbs Up" to show your appreciation
    Frank
    {------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
    Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
    This is a user supported forum. I am a volunteer and I don't work for HP.
    HP 15t-j100 (on loan from HP)
    HP 13 Split x2 (on loan from HP)
    HP Slate8 Pro (on loan from HP)
    HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
    HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
    HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
    HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
    HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

  • Is it possible to add a new graphics card to my macbook pro 2011 13"

    Is it possible to add a new graphics card to my macbook pro 2011 13"?

    Hi W,
    Sorry, but no. It's soldered onto the logic board.

Maybe you are looking for

  • Need new ATI Radeon 1400 display driver for Satellite A100-788 PSAA9E

    Hello , I search for New drivers for my ATI radeon mobility 1400 because in toshiba.com the last date drivers is 13/09/07. Thx.

  • Artwork doesn't match

    My coverflow art doesn't match my video viewer. In my computer iTune>album artwork, I have two folders- download & local. They look close but are not the same. I think that is my problem, so which one of the folders do I use to overwrite the other? T

  • Hard disk memory

    Hi there, I had almost 40GB of videos on my computer's internal HD. After transferring those to external HD, I deleted those videos to save me some space. However, after "Empty Securely" it only retrieve approx. 16GB! I restarted my computer a couple

  • Instantiating VHDL module written in a seperate .vhd file

    Hi,       I have two files in the pcores>hdl>vhdl folder 1) "vga_controller_vhdl.vhd"  the main file(created through EDK) which communicates with Microblaze through FSL and 2) "vga_controller_640_60.vhd" file that contains the timing generator module

  • "new document or drag files here" not visible

    Hi, I gave "Collaboration" permission to Visitors (read only users) in a document library sub folder. My problem is: users can't see the "new document or drag files here"  option, so the only way to upload a file is in the ribbon: "File" -> "Upload d