Is it possible to build a project with Labview 2010 on a Windows XP system, that is useful for a system with windows 7 on it?

Hi there,
I am planning to use Labview 2010 in a short time.
But before I'm going to use it I have some questions.
I know it is possible to run Labview 2010 in an XP environment. But is it also possible to, when running Labview 2010 on a XP system, to build a project to a version that is useful in a Windows 7 environment?
Or do I have to run Labview 2010, when I want to build a project that is useful on a Windows 7 system, on a system with Windows 7?
Please give me some information.
I hope to hear from one of you soon.
Regards,
Kenny
Solved!
Go to Solution.

Is it possible to build a project with Labview 2009 on a Windows XP system, that is useful for a system with windows 7 on it?
Thanks.
Philippe B.
Certified Associate Developer / Dépt Moyens d'essais
www.ingenia-system.com

Similar Messages

  • Where can I find a mapping of the Mac Powerbook version number (e.g., 3.1) to the dates (e.g., "late 2007") that Apple uses for indicating compatibilty with OS upgrades?

    Where can I find a mapping of the Mac Powerbook version number (e.g., 3.1) to the dates (e.g., "late 2007") that Apple uses for indicating compatibilty with OS upgrades?

    There were no PowerBooks made in 2007. By then Apple had switched over to Intel and they were making MacBook instead.
    If the MacBook is what you really want try http://en.wikipedia.org/wiki/MacBook
    Allan

  • Error 1 when building my application in Labview 2010 Version 10.0f2

    I am getting the following error trying to build my application in Labview 2010 Version 10.0f2 and I get the following error:
    Error 1 occurred at Invoke Node in AB_Build.lvclass:Copy_Files.vi->AB_Application.lvclass:Copy_Files.vi->AB_EXE.lvclass:Copy_Files.vi->AB_Build.lvclass:Build.vi->AB_Application.lvclass:Build.vi->AB_EXE.lvclass:Build.vi->AB_Engine_Build.vi->AB_Build_Invoke.vi->AB_Build_Invoke.vi.ProxyCaller
    Possible reason(s):
    LabVIEW:  An input parameter is invalid. For example if the input is a path, the path might contain a character not allowed by the OS such as ? or @.
    =========================
    NI-488:  Command requires GPIB Controller to be Controller-In-Charge.
    Method Name: Linker:Write Info To File
    I have searched and can find no real sollutions to this problem.  I did the updates and still nothing.  Now I can't even build an app with Laview 8.6.  I reference several .NET items and refuse to rebuild each and every one of them.  My only option at this point is to uninstall all Labview and then reinstall 8.6 so I can do something.
    Help if you can.

    Hello RBrown
    I am really sorry for this inconvenience!  This is a known issue.
    Can you please attempt the following for me:
    When you are building an application, under Advanced please check the last box "Use LabVIEW 8.x file layout"
    If that doesn't work, you may need to rebuild the LLB in a separate directory with new names, and use it as the build inclusion.
    Here are some forum posts strictly for your information:
    I have found users that have had similar issues. I am trying to make this workaround work for you.
    http://forums.ni.com/t5/LabVIEW/error-1052/m-p/912192
    This is a known issue that some customers have already commented on:
    http://forums.ni.com/t5/LabVIEW/NI-Please-don-t-put-illegal-vi-names-in-your-toolkits-thanks/m-p/745...
    I have filed a corrective action for this issue and I will add you to the list of individuals who need this issue resolved.
    Sincerely,
    Greg S.

  • I have a very old G$ that I use for ProTools. I just bought a slightly newer G4 and I want to find out if it is possible to transfer my old OS 10.2.8 system from one computer to the other so I can run my old ProTools system without a hitch. Thanks!

    I have a very old G4 that I use for ProTools. I just bought a slightly newer G4 and I want to find out if it is possible to transfer my old OS 10.2.8 system from one computer to the other so I can run my old ProTools system without a hitch. I would rather not buy the old 10.2.8 system as it is expensive. Thanks!

    Need to know which newer one, some cannot run 10.2.x.
    One solution might be to clone the 10.2.8 Drive to another drive, then Install a later OS on it Preserving Users & Settings.
    Best way to get an exact bootable copy of your old drive to the new one is with Carbon Copy Cloner...
    http://www.bombich.com/software/ccc.html
    Relatively painless Archive & Install, which gives you a new/old OS, but can preserve all your files, pics, music, settings, etc., as long as you have plenty of free disk space and no Disk corruption, and is relatively quick & painless...
    http://docs.info.apple.com/article.html?artnum=107120
    Just be sure to select Preserve Users & Settings.

  • I accidentally set up two accounts.  One account with my old e-mail address which I've been using for years and has all of my purchases on it.  Now I have a new account with my current e-mail address. How do I disable this new account?

    I accidentally set up two accounts.  One account with my old e-mail address which I've been using for years and has all of my purchases on it.  Now I have a new account with my current e-mail address. How do I disable this new account?  I need to disable the new e-mail address account so that I can add it as an additional e-mail to my old account.  THEN, how do I make this new e-mail address my primary e-mail for this old account?

    Did yoo go to Settings>iTunes and App Stores and sign out and sign back in?
    Next see:
    Frequently Asked Questions About Apple ID

  • How can i view multiple windows in safari? I used to do it with the 3 finger sliding, but that feature is gine now. please help

    how can i view multiple windows in safari? I used to do it with the 3 finger sliding, but that feature is gine now. please help

    Try a 2 finger Pinch to see the tabs.

  • My Windows 7 Professional desktop system hard disk got corrupted and I took the opportunity to install an SSD for a new system disk and reinstall Windows.  The system is up and running on the SSD, with my old system disk now used for storage as it is stil

    My Windows 7 Professional desktop system hard disk got corrupted and I took the opportunity to install an SSD for a new system disk and reinstall Windows.  The system is up and running on the SSD, with my old system disk now used for storage as it is still readable.  The only Adobe product I have reinstalled so far is Reader XI but I would like to reinstall Elements 8 and Acrobat 9 without taking up more licences as both are also installed on my laptop.  Can you point me to the best way to do this?  - Thanks

    If you have the two allotted activations already and one was lost on the hard drive that failed then you need to contact Adobe Support thru chat and ask them to reset your activations.
    For the link below click the Still Need Help? option in the blue area at the bottom and choose the chat option...
    Serial number and activation chat support (non-CC)
    http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC )

  • HT5988 I downloaded Mavericks and now my WD Smartware that I use for Time Machine is no longer compatible with this OSX version?  How do I make that unit compatible?  olefromca

    I downloaded Mavericks and now my WD Smartware that I use for Time Machine is no longer compatible with this OSX version?  How do I make that unit compatible?  olefromca

    I agree entirely, been messing with this since the upgrade to Mavericks but I didn't find it quite as easy as uninstalling the WD smartware as it still operates when you plug the drive back in - I think it gets loaded onto the drive and runs from within (?). The advice from WD was that time machine was faulty and I should contact Apple...thanks guys!
    Anyway, for the OP's benefit, this is what I found:
    1. My problem was that time machine couldn't see any further back than before the Mavericks install, but if I opened up and interrogated the WD drive, the old backups were still there.
    2. When TM started doing new backups, it overwrote the ones that it could see, not the oldest ones on the drive. This indicated to
    me that the WD software had somehow partitioned off the old backups and excluded that part of the drive from being overwritten. Of course, as the drive was practically full, it meant that any new backups wouldn't fit in the available space.....
    3. The only way I could find to resolve this was to use the disc utility to erase and repartition the external drive. This will obviously remove all of the old files and backups, but I was more concerned about keeping a current profile as backup rather than a load of stuff from months ago.
    4. Anyway, what happens after the eraseure has completed is that you get the WD icon on the desktop, and you're invited to install the software - this means the software has now been deleted. Juts don't reinstall it, just let TM do it's backup and all is well.
    Usual disclaimers and warnings about keeping another copy of your system etc. obviously apply, and I know this is a radical move to delete all your old data but it worked for me. I guess I didn't appreciate that you could use the external drive without the software that came with it and just followed the screen guide.
    I'm also aware that if you don't want to use TM to do a complete restore and only want to find one old version of a document, this is difficult. However, you can then install the WD software and find the file but you'll then have to do this all again.....

  • LabVIEW crashes when you run a VI that contains a mixed signal graph with a multi-plot cursor.

    Hello, LV 8.2.1 notes indicates the following bug fix:
    43SAIR2A  Fixed an issue where LabVIEW crashes when you run a VI that contains a mixed signal graph with a multi-plot cursor.
    I am running this version, and still have this behavior.  Is there anything I may be missing, and/or certain circumstances that may still be causing this?
    thanks in advance,
    Darren

    Darren:
    I looked at the CAR ID that you mentioned and the issue has been resolved in LabVIEW 8.2.1. To verify something similar, I ran the attached VI and things worked just fine. Please feel free to send me the steps to follow to reproduce the issue you are running into in 8.2.1.
    Regards,
    Rudi N.
    Attachments:
    MixedGraphs.vi ‏15 KB

  • How much does windows 7 version that is used with boot camp?

    hello everybody
    combien coute une version windows 7 que l'on utilise avec boot camp?
    how much does windows 7 version that is used with boot camp?
    thanks

    Wait for Windows 8 2012-10-25 and use the free Preview or Trial version for now is another option.
    Windows 8:
    http://msdn.microsoft.com/en-us/windows/apps/default
    https://blogs.msdn.com/b/b8/
    http://www.zdnet.com/blog/hardware/windows-8-an-installation-walk-through/14768
    http://www.gizmodo.com.au/2012/03/windows-8-on-a-macbook-air-beautiful-and-kinda -broken/

  • I have a two screen system that reads left to right.  With Yosemite it now reads right to left.  How do I fix it?

    I have a two screen system that read left to right.  With Yosemite the screens have switch and now the mouse and my brain have to read right to left.  Any ideas how to fix this?

    a brody,
    After further scrutiny your solution solved the mouse problem of going left to right.  But now the home screen problem.  Display two on the right still has the dock below and the menu bars.  Any ideas how to fix this?

  • Three way switch compaitable with labview 2010 SP1

    Hi,
    I am in need of three way switch  which is compaitable with  labview 2010 SP1.
    Plz help me ..
    thanks
    mahadev

    can u help me to upconvert the vi to LV2010. which manual are u talking abt?
    Attachments:
    3 position.llb ‏46 KB
    3switch.ctl ‏8 KB
    3switch.vi ‏16 KB

  • Hi there, I am trying to sign up for CC with an exisitng Adobe ID that I used for the Lightroom and Phtoshop trials.

    I am trying to sign up for CC with an exisitnd Adobe ID that I used for the Lightroom and Phtoshop trials.  Can you tell me how to do that?

    http://www.adobe.com/products/creativecloud/faq.html
    http://helpx.adobe.com/creative-cloud/help/install-apps.html to install or uninstall
    http://forums.adobe.com/community/download_install_setup/creative_cloud_faq
    What it is http://helpx.adobe.com/creative-cloud/help/creative-cloud-desktop.html
    Cloud Getting Started https://helpx.adobe.com/creative-cloud.html
    Cloud Plans https://creative.adobe.com/plans
    -Special Photography Plan includes Photoshop & Lightroom & Bridge & Mobile Lightroom
    -Special Photography Plan includes 2Gig of Cloud storage (not the 20Gig of the full plan)
    -http://helpx.adobe.com/creative-cloud/faq/mobileapps.html
    -http://helpx.adobe.com/photoshop/kb/differences-photoshop-creative-cloud-photography.html
    -and subscription terms http://www.adobe.com/misc/subscription_terms.html
    -what is in the entire Cloud http://www.adobe.com/creativecloud/catalog/desktop.html
    -http://www.adobe.com/products/catalog/mobile._sl_id-contentfilter_sl_catalog_sl_mobiledevi ces.html

  • WADK components & setting used for power management with answer file for windows 8.1 ent

    hello,
    I have to deploy windows 8.1 ent device with MDT answer file related to power management  with customized  following settings:
    High performances
    sleep timeout settings
    standby or sleep and hibernate setting
    Enable critical battery task.
    But don't know 
    1. how to manage power settings using answer file (WADK) for win8.1.
    2. which OS Windows image component and setting used for power management in WADK.
    Thanks
    Richa Km

    The way I do it with my task sequences (this works with MDT as well as SCCM) is to have an exported power plan using the POWERCFG -EXPORT command.  I create a software package around the resulting *.POW file with a command do do an POWERCFG -IMPORT.
     I then issue a POWERCFG -SETACTIVE command to the GUID of the *.POW file to enable that power scheme.
    More information on the POWERCFG command can be found here:
    https://technet.microsoft.com/en-us/library/cc748940%28v=ws.10%29.aspx
    Hope that helps,
    Darth.Mongo

  • [svn:fx-trunk] 20696: update build. properties values that are used for flex-sdk-description.xml.

    Revision: 20696
    Revision: 20696
    Author:   [email protected]
    Date:     2011-03-08 14:09:49 -0800 (Tue, 08 Mar 2011)
    Log Message:
    update build.properties values that are used for flex-sdk-description.xml. release.version = 4.5.1 release = Superhero
    QE notes: no
    Doc notes: no
    Bugs: no
    Reviewer: lauren
    Tests run: no
    Is noteworthy for integration: most likely FB will have to be aware of this
    Modified Paths:
        flex/sdk/trunk/build.properties

    Thats good news.

Maybe you are looking for

  • Is there a way of selecting all files within multiple folders?

    Let's say I have a folder called 'text books' and within that folder I have 100 more folders named by author.  Inside the folders are .txt files of their work.  Is there any way I can select all the .txt docs and paste them in one big folder?  In oth

  • Any way to get prior (non-iOS 6) version of iMovie?

    Just saw a demo of iMovie and really liked it. I headed to the iTunes app store and was seriously disappointed to find that I could only use iMovie if I updated to iOS 6. That isn't going to happen. I use Google Maps every day and will switch to an A

  • AE CC Render error output module failed

    Hi, I tried my best to find this answer on the forums but couldn't find anything current. I have isolated two issues in AE CC where I can duplicate a failed render with this message: After Effects error: Rendering error while writing file "xxx". An o

  • Having trouble connecting to wireless network

    Hello. I am having some difficulties connecting to my Linksys router from my Powerbook G4. Here is my issue... sometimes airport can find the wireless connection (called Linksys) and sometimes it can't. I don't understand why it does sometimes, but o

  • Oracle Dev Suite and Oracle DB Server on same machine

    I have Oracle 10g database server already installed. Now I want to install Oracle Development Suite 10g on the same machine. Should they be installed in the same or separate Oracle home? Is their anything I need to be aware of when installing? Thanks