Is It POSSIBLE to change the Technical Name of Z-version Query

Hi Friends ,
I was changed all quereis and cube from standard version to Z version.
For queries, by using rszc , i was changed to Zversion,Now again is it
possible to change the Technical Name of Zversion Query ?
If possible , can you please tell me the process ?

Hi Hameed,
This may be the reason you are getting an error.
The target InfoCube, the InfoCube for the query copies, must contain all the InfoObjects of the source InfoCube (InfoCube of the original queries).
The another reasons may be the copying of queries within the same cube shouldn't be done by RSZC.
It's better to approach the Bex Query designer.
Hope you understood..
Check the link below for more information:
Re: How to copy query elements without Bex
http://www.bi-expertonline.com/article.cfm?session=&id=2055
Re: copy queries + variants + workbooks -- RSZC ?
Regards,
Ravi Kanth
Edited by: Ravi kanth on Jun 10, 2009 10:03 AM

Similar Messages

Changing the technical names of an ODS and queries

Can I change the technical name of an ODS and the queries that are built on it? If so how? Thanks

Hi Niten,
As said by others it is not possible to change the technical name of any BW Object as there are too many complexities involved. However a possible option is create another ODS/cube and queries as the copy of the existing one and then transfer all the data.
Refer this post:
Re: Change infocube name
Bye
Dinesh

To change the technical Name

Hi Gurus,
Is it possible to change the technical name once activated?
How to change the Technical name of customize characteristics of infoobject?
Thanks & Regards,
San

Hi,
You cannot change the techincal name ever...its not possible and not even basis can do that.
I am not sure but try to open the system with the basis help and delete the entries from all the infoobject related SAP standarad tables...may be this can help.
Thanks

Is it possible to change InfoCube technical name/rename it?

Is it possible to change InfoCube technical name/rename it?
Thank you,
AG

I think no possibility to rename the technical name since it's such a 'key field'.
if not in production yet and no data and the 'afterward' not too much (reporting related,multiprovider), you may consider to copy the cube to the name you want, then copy update rules (this can be easy done), and copy queries.
Hope it helps.
Regards

Is it possible to change the genre name...

Can I change the name of the genre for an artist without changing the genre on every single song? Is it possible to change the genre name for all songs by an artist by just typing in the new genre for that artist just once?

Ted,
Yes and no.
You can select all the tracks you wish to change the Genre of and change them all at once. Then choose File>Get Info or type command-i.
You'll be warned that are about to edit information for multiple items.
Click OK. Then make you Genre change.
Just remember any field you change will be changed in all the selected items.
Matt

Changing the Technical name of the Infoset ????

Hello,
Is there any way from which i can change the technical name of the already created Infoset in BW 3.5 ver.
Regards,
Mayank

Hi,
Tcode : RSISET
http://help.sap.com/saphelp_nw04/helpdata/en/62/a7663bac808b78e10000000a11402f/content.htm
Regards
Happy Tony
Points == Thanks

Can i change the Technical Name of A Cube

Hi friends,
I have created a n Info Cube with the name ZXXTB02 follwed by the creation of Transformation and DTP . But Latter i found that I violated the naming convention,
So can i change the name of my Info cube to Z1XXTB02 or I have to create a new Infocube ...
Regards
Anurag

Hi Anurag,
Unless you can do some modification at the table level, you cannot change the technical name of the cube, so may be better to copy this as a new cube and give the desired technical name.
Hope this helps...

Any option to change the technical name of the info sources?

Hi,
Is there any option to change the technical name of the infor sources?

Hi,
You cannot change the technical name of infosource. You can go for Save as option and save it with different techincal name as required.
Regards
Akhan

Is it possible to change the font name and size without having to compile?

Dear All
We have one requirement that we need to change the font name and font size at run time dynamically without having to compile all the forms in 6i.
Is there any way or work around to achieve the same.Kindly suggest us.
something like using uifont.ali or forms60_defaultfont, or set_item_property
Thanks and Regards
Thangaraj.

Dear All,
Thanks for your updates, Technically what both of you said is correct. but in application server we used something like ClientDPI to match the client server font with the application server, i need to know that is there anyother way something like this...?
I have read one document(Note:28397.1 in metalink) saying that using uifont.ali file we can change the font at run time, but i have used this only for report
Thanks and Regards
Thangaraj.S

E-recruiting: Requisition management - Possible to change the field names??

Hi to all e-recruiting experts,
Need some assistance pertaining to the requisition management portion in e-recruiting.
We have showed the standard SAP E-recruiting requisition bsp pages to our client and they have requested changes to the field names as they feel that the standard names are not intuitive enough.
For instance,
The field - "Hierarchy Level" - They have requested to change to "Job Grade"
and the field "Functional Area" to "Type of Work".
Is there any way that i can change the name of the field through configurations?
I understand that in a infotype, we can change the field name through translation. But can we change it in BSP? I was told to explore on how to configure via OTR.
Can anyone share on the steps involved?
Many thanks in advance.

Well quite easy,
create a context for an otr text (E-Recruiting are in package PAOC_RCF_UI). You will find that in SOTR_EDIT.
Activate this context with implementing BADI BTFR_CONTEXT.
After doing this, adjust context in SOTR_EDIT with Go To -> Context -> Adjust.
Eventually refresh otr buffer with Transaction /$otr
For one text there can be more than one OTR Text in backend, so you might change more than one.
Regards

Is it possible to change the computer name?

Trying to simplify a few things and would like to change the names of my computers. Is there an easy way to do it? If so, will it screw other things up? Thanks in advance for any input.
Best,
-Thomas

System Preferences > Sharing has a place where you can rename the computer. As far as I know, it is completely harmless.

BizTalk WCF receive, possible to change the SOAPAction name?

Building Biztalk to replace a webservice to receive vendor order, everything is fine but just realized today the default BizTalk receive soapaction is 'BizTalkSubmit', any way to change that? say to 'ReceiveOrder'?
Thanks
https://ninithepug.wordpress.com/

You can modify the operation name as shown below and expose the BizTalk service again.
Or if you wish to update the existing one.
1. navigate to the ServiceDescription.xml file of the service. This would be generated by the BizTalk wizard. You can go to C:\Inetpub\wwwroot\[servicename]\App_Data\
2. Find the xml tag Operation and replace the value for name attribute from "BizTalkSubmit" to "ReceiveOrder" .
3. Recycle the app pool.
4. Browse the WSDL and it should have the new soapAction value.
Rachit
Please mark as answer or vote as helpful if my reply does

Is it possible to change the product name thorugh Script on terminal. i have created one sh file in which i put the below Script and put that in xcode project ...Here is the code..

die() {
    echo "$*" >&2
    exit 1
ProjectName=$1
appname=$2
config='Ad Hoc Distribution'
sdk='/Applications/Xcode.app/Contents/Developer/Platforms/iPhoneOS.platform/Develope r/SDKs/iPhoneOS5.1.sdk'
project_dir=$(pwd)
echo using configuration $config
echo updating version number
agvtool bump -all
fullversion="$(agvtool mvers -terse1)($(agvtool vers -terse))"
echo building version $fullversion
xcodebuild -project "$ProjectName".xcodeproj -configuration "$config" -sdk $sdk build || die "build failed"
echo making ipa...
# packaging
cd build/"$config"-iphoneos || die "no such directory"
rm -rf Payload:
rm -f "$appname".*.ipa
mkdir Payload
cp -Rp "$appname.app" Payload/
# if [ -f "$project_dir"/iTunesArtwork ] ; then
#    cp -f "$project_dir"/iTunesArtwork Payload/iTunesArtwork
# fi
# ipaname="$appname.$fullversion.$(date -u +%Y%m%d%H%M%S).ipa"
ipaname="$appname.ipa"
zip -r $ipaname Payload
echo finished making $ipaname
. Now i tried to run this sh file thorugh terminal.....thorugh command sh shfilename projectname TEST... After running this command it successfully generated an ipa with name TEST.ipa...I tried to installed this on my device..but on itunes it is giving message that file is not valid..Please help me out if i forgot to perfom any steps.

Hi Matthew,
Just staring at your ActiveX code, it looks fine to me. My first thought is that this should work as you outlined it, and I've done this sort of thing many times, so I know it can work. My second thought though, is that what you probably really want is a DataPlugin and not a VBScript. Then you could just drag&drop the Excel file into the Data Portal and load all the properties and channels you want from the Excel file. If you have DIAdem 2010 or later you can use the SpreadSheet reader object in the DataPlugin to avoid the Excel ActiveX functions (and Excel's jealously with other applications trying to read a file it has open already).
Feel free to send me a few sample Excel files and describe what you want to load from the various cells, and I'd be happy to help you get a DataPlugin written to load your data. You can also email me at [email protected]
Brad Turpin
DIAdem Product Support Engineer
National Instruments

"Is it possible to hide/remove/change the server name/type and

Is it possible to change the server name/type and version number being sent in the http response header by iPlanet Web server so a hacker can't see what server and version I'm running? If yes, what is the procedure to do it?

Hi,
I have tried the ServerString none entry in magnus.conf but still it is showing the Server information in the header if you use telnet . Is there any other way to hide or to mask this information.
Thanks,
Ramki

Renaming the technical name

HI,
Is it possible to rename the technical name of the query? If yes, how to rename it?
I am trying to rename it using save as and deleting the previous query. Is there any option without using save as u can rename the technical name of the query?
Regards
Prasad

Hi Prasad,
I don't think change the technical name of the existing querry. But you can do save as the existing query with the desired technical nbame and then can delete the old query.
Hope this helps.
Regards,
Reddy

Is It POSSIBLE to change the Technical Name of Z-version Query

Similar Messages

Maybe you are looking for