Is it possible to change warning "& is marked for deletion" to a hard error

As part of our periodic update of our bank directory in transaction BAUP, Bank Keys which are no longer valid are marked for deletion. We are not at the point where we are archiving records yet, so the actual deletion has not occurred in our system.
When an HR user updates a person's bank information (transaction PA20 or PA30, InfoType 09), if they enter one of these bank keys, they are given a warning that the bank key is marked for deletion. However, this is not a hard stop, only a warning message. As a result, they are able to save the record with an invalid bank key. The details indicate that this is message class F4, message 230. However, it appears from the IMG that it may be message 210. I have tried working with each of them.
I have attempted to change the message to a hard error in message control, but have not been able to do so. I receive an error telling me that "Message 230 (or 210) is not allowed". I have tried several application areas, including FV, Electronic Banking Messages.
Is there any way in configuration to change this to a hard error? If so, please supply details, including application area.
Also, are there risks of disruption of standard business processes if we do change this to a hard error? I know that this same message is issued for other master data elements which are marked for deletion such as GL accounts or Customer records,
Thank you.
I have searched forums with terms "marked for deletion" and "warning" but have not found an answer. I have also searched various outside expert forums on this topic. Everything I have seen seems to assume that this message will be a warning only.
Aoife B.
Edited by: Aoife Bratton on Oct 16, 2008 4:16 PM
Edited by: Aoife Bratton on Oct 16, 2008 4:16 PM

If particular message is not allowed in OBA5, then it is not configurable message. Neverthless if you like to change this message, you need to configure this in OBMSG first

Similar Messages

Is it possible to change the Apple ID for my macbook pro?

Is it possible to change the Apple ID for my macbook pro? My laptop is currently registered under my husband`s ID, and I would like to change it to my apple ID so I can install changes / updates (as we are now separated). Would appreciate any help.

In your post you have indicated that the MBP has Snow Leopard (10.6.8) installed. You will have to use the original OSX disk and slide it into the DVD drive on startup holding the C key. Then you follow the instructions on the display.
Worst case is to take it to an Apple store and have them assist you in the installation process.
Ciao.

Vendor master marked for deletion

Hi Gurus,
I have the following issues related to vendor master deletion.
1. I can able to create PR, release the PR for the vendor after marked for deletion and also blocked in XK05.
2. It allows to maintain RFQ for the vendor marked for deletion and also blocked in XK05.
3. It allows to release PO for the vendor marked for deletion and it blocks only after blocking in XK05
4. It allows to post GR and IR for the vendor marked for deletion and also in blocked in XK05.
Appreciated your help on this.
Thanks and regards
Durai

the deletion indicator is a preparation for archiving.
However, archiving will check whether the vendor is still in use and must be kept.
A deletion indicator will with standard customizing not restrict the usage. The user get a warning message and this should him make start thinking.
1. I can able to create PR, release the PR for the vendor after marked for deletion and also blocked in XK05.
Do you have a purchasing organisation. in the requisition? XK05 restricts the order creation, I do not know about any restriction in requistion creation or release.
2. It allows to maintain RFQ for the vendor marked for deletion and also blocked in XK05.
This should not be possible if the purchasing block is set according to OSS note 67341
3. It allows to release PO for the vendor marked for deletion and it blocks only after blocking in XK05
Thats correct, If the vendor was not blocked at PO creation, then system has to allow the follow on activities, explained in OSS note 129836
4. It allows to post GR and IR for the vendor marked for deletion and also in blocked in XK05.
same as for Q3, explained in OSS note 129836

GL Codes Marked for Deletion - Segregation

Hi,
The users have some GL Codes that are in the Chart of Accounts but have been marked for deletion. The users now want these GL Codes to be segregated from the normal ones being used, by using a prefix such as "Z" or "X". Is it possible to do so and how can this be done?
Thanks in advance.
Your help would be highly appreciated.
Regards

Hi,
You may use Tcode MASS for mass change of the GL account
Putting the special character on the start of the GL account code cannot be done since you that portion cannot be edited
You may use table SKA1 to generate all the GL account that is marked for deletion.
Hope this helps you.
Thanks,
Rod

A customer marked for deletion can create SO

Hi guyes, there is an incident in SD module.
A customer marked for deletion since 2008-4-29. But we can still create SO for it today(2008-12-26), only get a warning message.
Can I configure somewhere to get an error message to prevent us creating new SOs for this customer?
Or must we program in User-Exit?

Hi,
Try this one.
Goto OBMSG, select application F2.double click on messages.
Change message type from I to E for message number 133 and 131.
Goto SM30. enter V_T100C. click on maintain.
Enter application F2. Click on new entries.
Enter message 131 or 133 Enter value E in online and Batch fields and save.
Regards,
Chandra

Vendor Marked for Deletion

Dear Experts,
I have marked one vendor for deletion. But at the time of invoice booking it gives and warning and allows the posting.
I wanted to changes the warning message to Error Message.
I have check the setting in OBA5, Entered the Application Area F2.
For the following message numner, I am trying the change the standard message type to E but after chaning when I press enter, it takes 'I'.
128 Vendor & is marked for deletion
129 Vendor & is marked for deletion in company code &
130 Vendor & is marked for deletion in purch.organization &
And solution to this problem?
Thanks
Paul

Hi Ajay,
Thanks for looking into it.
done as below,
128     E     E      I
129     E     E      I
130     E      E     I
then fk06 where I am selecting
All Sales
Selected Company code
General Data
Selected company code incl general data.
After all of above I am getting as wanrning still.
Any mistake in my prosecc.
Paul

Open Production Order with Mark for deletion

Hi
Friends again stuck in open production order
i want to calculate production order quantity for open production order,
only those production order which dont have mark for deletion.
I find a field in afpo XLOEK ..but it wont get reflects when done changes in CO02
Then i used the table JEST and i want to delete those aufnr which has deletion flag i wrote the folowing code pls do correct me where iam wrong .
IN this code deletes aufnr which are marked as deletion ?
SELECT afko~aufnr
       afko~gamng
       afko~plnbez
       afpo~dwerk
       afpo~psmng
       afpo~matnr
       INTO CORRESPONDING FIELDS OF TABLE i_afko
       FROM afko INNER JOIN
       afpo ON afpoaufnr = afkoaufnr
       WHERE afpo~dwerk = s_werks
      AND   afpo~matnr IN s_matnr
      AND afpo~elikz = space.
LOOP AT i_afko.
CONCATENATE 'OR' i_afko-aufnr INTO i_afko-aufnr.
MODIFY i_afko.
ENDLOOP.
IF NOT i_afko[] IS INITIAL.
SELECT jest~objnr
         jest~stat
         jest~inact
          INTO CORRESPONDING FIELDS OF TABLE i_jest
          FROM jest
         FOR ALL ENTRIES IN i_afko
         WHERE objnr = i_afko-aufnr.
ENDIF.
LOOP AT i_jest INTO wa_ijest.
IF wa_ijest-stat = 'I0076' and ( wa_ijest-inact = SPACE ).
    DELETE i_afko WHERE aufnr = wa_ijest-objnr.
ENDIF.
ENDLOOP.
i_afko1[] = i_afko[].
SORT i_afko BY matnr dwerk.
DELETE ADJACENT DUPLICATES FROM i_afko COMPARING matnr dwerk.
loop ....
calculate :quantity
endloop.
Regards and answers will be rewarded points

thnks
solved the problem
regards

Error 1075: The dependency service does not exist or has been marked for deletion

Windows 7 Pro laptop will not connect to corporate domain. Multiple identical twin laptops have no problem.
Best suggestion so far has been to leave the domain and rejoin it, BUT the relevant buttons are grayed out and the comment says "Note: The identification of the computer cannot be changed because:- The Workstation service is not running. Open the Services
snap-in (services.msc) to ensure it is running and set its Startup Type as "Automatic"."
In services.msc the Workstation service is already set to Automatic but is not started. When I try to start it manually the response is "Windows could not start the Workstation service on Local Computer." and then "Error 1075: The dependency service does
not exist or has been marked for deletion."
Rebooting gets me nowhere.
In all other respects that laptop appears fine and can connect to the Internet, but NOT to the network. I have brought it and a twin laptop home to try on my domestic network and get the same results.
Any ideas, please?

Hi,
Let us go to services.msc and navigate to Network Store Interface Service. Please check whether this service has been set to Automatic and turned on.
Kim Zhou
TechNet Community Support

HOW TO BLOCK THE PURCHASE ORDER AND MARK FOR DELETION ?

Hi ,
During the Creation of the Purchase order in the SAP System... After creation of the Purchase order should be blocked and a work item is created for the approver. If the Approver approves the Order then the Order is Unblocked and a mail send to the initiators inbox and the Order is Released. Similarly if the Approver Rejects the Purchase Order then its set for Mark for Deletion.
I did Po creation and release part. But i am facing problem during the Blocking & Unblocking the Purchase order. If he rejects i need to set for "Mark For Deletion". plz help me to solve this...

Hi,
You can use bapi 'BAPI_PO_CHANGE' to change the status of PO and for release use bapi BAPI_PO_RELEASE.
Hope this will help you.
Smit

How to recover customer marks for deletion

Dear Friends,
How to recover customer marks for deletion.
Pls give me the compelete process.
Thanks,
Atul

Dear Atul
Do you want to change the change the deletion flag set for a customer??
If so, go to <b>XD06</b>, give all the datas required and press enter. Now you can see some white boxes against the fields like "All areas", "selected for company code" etc., Wherever tick mark is there, untick and save.
Thanks
G. Lakshmipathi

Vendor - MArk for Deletion at Comp code & Pur Org Level

Hi Gurus
I want a list of vendors (about 150 Vendor) to be Marked for Deletion at Comp code & Pur Org Level
How to proceed ?

hi,
To be able to archive, you must set the deletion flag in the master record. You can set this flag for a complete vendor or for individual company codes or purchasing organizations.
You can archive data from different tables using the archiving object FI_ACCPAYB...
Mark a vendor for deletion centrally as follows:
Choose Master records ->Maintain centrally -->Mark for deletion.
The initial screen appears.
Enter the vendor account number and, if you wish, the company code and a purchasing organization.
If you do not specify the key for a purchasing organization, you cannot delete this area at a later date, should you wish to.
Select ENTER .
The screen for specifying data for deletion appears.
Select data to mark for deletion by clicking next to the appropriate field.
Save your entries by choosing Vendor ->Save.
The system displays the initial screen, with a message confirming that the data has been saved.
Mark a vendor master record for deletion for the Accounting Department as follows:
Choose Master records -> Mark for deletion.
The system displays the initial screen.
Enter the vendor's account number and the company code.
Select ENTER .
The system displays the screen for selecting areas to mark for deletion.
Select the data either in the company code or in all areas to mark for deletion.
If you click next to the All areas field, the system will later delete all data for all company codes and for all purchasing areas in this vendor master record.
Save your entries by choosing Vendor -> Save.
After you mark a vendor master record for deletion, you can still post to the vendor account. This is necessary, since you might still need to clear open items. When you post, the system issues a warning that you are posting to an account that is marked for deletion.
Displaying Archived Vendor Master Data
To display single documents for the archiving object FI_ACCPAYB using Archive Information System you require an information structure that has been created based on one of the following standard field catalogs provided by SAP:
●     SAP_FI_ACCPAY_1 (vendor master data FI)
●     SAP_FIACCPAY_2 (vendor master data SD)
Each information structure must be active and filled.
Edited by: Priyanka Paltanwale on Aug 21, 2008 9:09 AM

GL account marked for deletion

Hi ,
I am trying to do MIGO and I am getting this error "G/L account marked for deletion" . Pls help to reolve .

hi
the acct might be deleted for some purpose
so plz consult ur fi person
either change the gl acct in OBYC or
go to fs00 then in side tree select gl acct and click on dustbin icon then u will get a pop up here un check del flag
http://web.mit.edu/sapr3/windocs/fomds04f.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/52/1eae17879011d3b84700a0c930dc87/content.htm
regards
kunal

Purchasing Info Record marked for deletion

Hi experts,
I need some explanation on Purchasing Info Records and more precisely on the deleted ones.
Could you tell me why a Purch. Info Record that is marked for deletion is still set when a PO is created?
In ME13 I have the following warning message : 06-718 (Purchasing info record & & & & flagged for deletion).
In ME21N the same message is displayed as warning and users are able to save the PO with the deleted Info Record.
I don't understand why SAP still retrieves Info Records that are marked for deletion...
Is there a way to prevent SAP from using deleted info records?
Thank you for your help.
Regards,
Philippe

Hi Philippe,
The message 06718 can be set as an error or warning in customising.
If message 06718 is set as error then system will not allow to save
the document with that info record.
The deletion indicator is the reservation to delete this record. But
this is not comparable with the deletion of the record from the database
This has to be done within the archiving run for the object MM_EINA.
Untill this inforecord is not archived the data is taken as usual."
Online documentation provides the following information
"You cannot delete obsolete info records immediately. You can
only flag them for subsequent deletion. Info records earmarked for
deletion in this way are not actually deleted until the archiving
program is run. This is done at regular intervals by your system
administrator. You can flag an individual info record for deletion,
or create a list of deletion proposals and choose the relevant records
that are to be deleted from this list."
Kind regards,
Lorraine

How to reset OpenLDAP service that was marked for deletion

Hi,
I installed the Shared Services, Essbase and Planning in my PC. After installing it, I went to services screen. I found that OpenLDAP service was in 'Started' and 'Disabled' status. When I try to change the status of the service from 'Disabled' to 'Automatic' or 'Manual', I am getting an error 'The specified service has been marked for deletion'. If I tried to stop the service, the service is vanishing from services list. I am consistently facing this issue even if I tried to reinstall all the modules. Can any one tell me how can I resolve this issue?
Thanks in advance,
Chandu

Hi,
I take it that after it has been marked for deletion and you reboot then the service is removed?
I am not sure what version you are on but for 9.3.1 to create the OpenLdap service again,
open a cmd prompt to directory
*\Hyperion\SharedServices\9.3.1\openLDAP*
and type :-
slapd.exe install OpenLDAP-slapd "Hyperion S9 OpenLDAP"
Cheers
John
http://john-goodwin.blogspot.com/

Settings for Mark for deletion for setting the exchange Rates

Hi all,
Can you tell me where is the settings for Mark for deletion for setting the exchange Rates.
User has deleted all the MEND rates in 'OB08'.
and he cannot input them again, gets error message "an entry with this key is marked for deletion"
Rg
vk

Hi
Try as said in help - Message number is SV010
You can:
enter another key
delete the entries before entering the new entry
The entries flagged for deletion can then no longer be reactivated.
End the error dialog with Cancel. Choose Save and repeat your new entry.
reactivate the entry marked for deletion to change it :
and return to the overview screen with Back.
Choose Display deleted entries in menu Choose to select all the deleted entries.
Mark the entries that you want to reactivate.
Choose Retrieve.
VVR

Is it possible to change warning "& is marked for deletion" to a hard error

Similar Messages

Maybe you are looking for