Is it possible to change what the "Slide to Unlock" says? I was told you could personalize it to say whatever you want.
Is it possible to change what the "slide to unlock" says? I was told you could personalize it to say whatever you want.
yes you can change is there are some free and some paid apps in the apps strore search them and you will find then
<Edited By Host>
Similar Messages
-
Is it possible to change what is displayed in the GAL in Exchange 2013
We have always used [email protected] for our primary email addresses, and to facilitate this someone back in the days of Exchange 2003 decided it would be sensible to use the firstname.lastname
format for our alias. This means our primary email does not match our UPN. Now, we are moving to Exchange 2013 and want to use autodiscover we find we need to change this so primary email and UPN are the same while still retaining the original email
addresses. Easy enough change, powershell script to modify the alias, new address policy on the 2013 server and migrate your users, changes made for you.
However, this has caused some concern amongst the senior management because it changes what is displayed in the GAL, so instead of the friendly first.last name listed under alias and the just as friendly
[email protected] listed under email address it will now show the UPN as alias and
[email protected] for email.
I have now been asked to see if it is possible to modify the details displayed in the GAL, I know you could in previous versions of Exchange using things like EMC, but I don't see any way of doing this in 2013.
Is this possible, and if so how?We have always used [email protected] for our primary email addresses, and to facilitate this someone back in the days of Exchange 2003 decided it would be sensible to use the firstname.lastname
format for our alias. This means our primary email does not match our UPN. Now, we are moving to Exchange 2013 and want to use autodiscover we find we need to change this so primary email and UPN are the same while still retaining the original email
addresses. Easy enough change, powershell script to modify the alias, new address policy on the 2013 server and migrate your users, changes made for you.
However, this has caused some concern amongst the senior management because it changes what is displayed in the GAL, so instead of the friendly first.last name listed under alias and the just as friendly
[email protected] listed under email address it will now show the UPN as alias and
[email protected] for email.
I have now been asked to see if it is possible to modify the details displayed in the GAL, I know you could in previous versions of Exchange using things like EMC, but I don't see any way of doing this in 2013.
Is this possible, and if so how?
You can use the Details Template to change what the GAL shows.
http://technet.microsoft.com/en-us/library/jj673049(v=exchg.150).aspx
Twitter!: Please Note: My Posts are provided “AS IS” without warranty of any kind, either expressed or implied. -
Is it possible to change just the ram on the motherboard (G5) or do you have to change the whole motherboard?
I do understand that... but this is the problem - The computer freezes when it is put to sleep (and sometimes more frequently). Apple told me that it could be three things: ram, hard drive or the motherboard. - take the ram out and then put the computer to sleep, if it still freezes than it is one of the other two and not the ram. They told me that there is ram on the motherboard. So I tried that and the computer wouldn't even boot up. So I thought the problem is the motherboard and possibly the ram on the motherboard. I really have no idea what I am doing, I just don't want to have to throw a $3,500 (when new) computer away.
Thanks! -
Mac version - Is there a possibility to change to the windows version?
Hello Adobe team,
I bought an Adobe Creative Suite 6 Master Collection as "Student and Teacher Edition" for MAC in 2013. I am now working in a pure Windows environment and would like to exchange the product in a Windows version. Alternatively, I could also imagine to sell my software and to use the cloud version. What are my options? 1. Is there a possibility to change to the windows version? 2. Is it allowed to sell the “Student and Teachers Edition”? And if so, only to students and teachers? THANKS for the help! The software was quite expensive ...2. Is it allowed to sell the “Student and Teachers Edition”?
No. The whole point of the special licensing is that it's meant to support people in education or else the low price wouldn't exactly make sense - if everyone just bought used edu licenses, Adobe would bankrupt in a predictable timeframe.
1. Is there a possibility to change to the windows version?
Order product | Platform, language swap
Mylenium -
Hi everyone,
I recently got fcpx and i am having lots of trouble trying to put in a text. When i choose a text to put on top of a clip, i am not able to change what the text says. I am not even able to highlight the text on the screen. There is not text box on the text tab where i am also able to change the text.To make what Tom said, a little clearer, press 'A' then double click the text box in the Viewer window, and type into there.
Andy -
IS IT POSSIBLE TO CHANGE DINAMICALLY THE SOURCE OF A QUERY?
IS IT POSSIBLE TO CHANGE DINAMICALLY THE SOURCE OF A QUERY, AND TO SHOW DATA FROM DIFERENT TABLES, BASED IN USER PARAMETER VALUE?.
EXAMPLE:
IF USER PARAMETER = 1 THEN
SELECT COLUMN1 FROM TABLE1
ELSIF USER PARAMETER = 0 THEN
SELECT COLUMN2 FROM TABLE2
END IF;
ANY OTHER IDEA??
THANKS FOR HELPS.Read the online help about lexical parameters.
Select a from &p_1
should work. -
My iPhoto hasn't upgraded at all, just the icon has changed, but the all graphic hasn't changed, whats the problem ?
I'm having the same problem...it says that it upgraded (it says iPhoto 9.5 when I go into 'About iPhoto') and the new features seem to be there (when I click on share, I have the new option of ordering photo's like it shows in the pictures on the site, ordering a photo album, etc), but the main user interface is still the old one. Instead of having the new buttons on the bottom for Events, Faces, etc, I still have all of those on the old toolbar on the lefthand side...so confused haha.
-
my sons ipod says disabled for 22,807,916 min and will not allow me to restore it. on the computer is says that i have to enter his password but the slid to unlock is not even of the screen, HELP!!!!
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
Bottom row of the keyboard is not working in a vertical orientation on the iPhone 3Gs. the "slide to unlock" and all keys on the calculator on both orientation works fine. I can use the keyboard on horizontal orientation. The tabs on bottom of all apps also work fine.
I have already tried holding down the power button and home button for 10 seconds, but no difference.I've had this problem on and off for the last few weeks (around, but not directly related, to upgrade to 6.1...can't remember if was before or after)....I'm very convinced it's a software problem (as there have been times when the bottom row works perfectly, without any need to "press" differently or anything).
However, it seems to be a rather resilient software issue, as a full restore does not consistently fix it, and it applies to more than just the keyboard; if I open a drawing app, there's definitely a row (about 4mm up from the edge of the screen closest to home button) where I cannot draw.
It's happened 4 times now. Originally it went away with a restore from backup, then worked for 2 more days. The second and third times, it went away with a full restore (although I did two full restores in between those two restores that did nothing, so restore didn't consistently fix it)....and it seemed to return in the most random of circumstances.
I paid very close attention to what apps I was using the last time it was working so that I could spot which app, if any, might be causing the issue. I deleted several apps, I stopped using the games and many other apps. I only used three apps between it working fine and starting up as a problem again: mail, safari and messages.
I was convinced it was mail, as it happened this morning when I picked up my phone off the bedside table to respond to a new email. It was working when I went to bed. I picked up the phone when it buzzed, hit the email app, hit reply and started to type....**** bottom row wasn't working again.
However, tonight I did 2 things....one of them worked because it went back to normal (sorry, I don't know which as I was exasperated and trying a number of things).
The two things I did between a broken keyboard and a working keyboard were:
1) adding a second keyboard (English(Canada)), changing to this keyboard, and changing back
2) disabling Siri...and then turning it back on...and then disabling Siri's "Raise to Speak"
In retrospect, I wonder if it actually was the "Raise to Speak" that was putting the phone into a weird state, and might explain why the phone would just "suddenly" start behaving strangely when I picked it up. Of note, the "raise to speak" hasn't actually triggered Siri to come on in months anyway.
Regardless, the keyboard is back to normal now...and I'm just going to leave "Raise to Speak" off. I've put the keyboard back to just "English" with no alternates and Siri remains on otherwise without issue. -
When I turn on my iPad2, I can see the 'slide to unlock' button and my saved screen. However, on top is the "Not Enough Storage" information. It usually allows me to either hit "close" or "setting". However, it is totally locked.
I plugged my iPad into my computer to take off a lot of apps. Nothing changed. I am totally lost as to what to do...This can be a problem with the file [http://kb.mozillazine.org/sessionstore.js sessionstore.js] and sessionstore.bak in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder]
Delete [http://kb.mozillazine.org/sessionstore.js sessionstore.js] and sessionstore.bak in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder]
If you see files sessionstore-##.js with a number in the left part of the name like sessionstore-1.js then delete those as well.
See:
* http://kb.mozillazine.org/Session_Restore
See also:
* http://kb.mozillazine.org/Firefox_crashes
* [[Firefox crashes]] -
I haven't been able to use my ipod for a month because its stuck on a screen that says "Activation Required" and the slider to unlock it is unresponsive. I've drained the battery and recharged it, I've tried resetting it. When I try opening it in iTunes it tells me its unable to access it because the iPod is locked with a passcode, which I can't enter on my iPod because the slider is unresponsive. Any help?
next thing i would think of is to ask bestbuy apple retailer or bestbuy pple to help u out from here bc im not sure what to do next if u cant get it into dfu mode.
all i can think of is to hold home and power for 30 seconds in the meantime of showing the apple sign at least once or twice.
either that, home and power flashes once and 1/2 sec later release power while holding home still and plug it in wihout trying to let go the home button. dont even let go until itunes says somthing remotly saying anything ...lol -
I have just updated my iPhone to version 5.1. After the update, the camera button next to the "slide to unlock" button does not work at all. It used to function well before the update. It happens to my friends as well. What should I do? Can someone help?? Thanks!!!!
Slide the camera button up
-
I'm trying to use the slide to unlock bar but the iPad 3 touch screen is non responsive.
iPad 3 touch screen non responsive. How can I fix this?
I'm trying to use the slide to unlock bar but the iPad 3 touch screen is non responsive. How can I fix this!I tried that step but it would not work. I think I may have changed a setting.
I was able to highlight a function but had to tap 3 times to get it to respond
to the command. I think it's some type of Restriction or Accessibility settings.
Any suggestions? -
How do i get a new text message to show up when i am on the slide to unlock sceen
when someone texts me and i don't look at my phone because i am busy, after a while the notification leaves the "slide to unlock screen" is there a way that i can keep the notification of a new text message on that screen untill i look at my phone and slide to unlock it again?
1patiot1 wrote:
someone please tell me how to fix this. I cant access any apps or anything because my old apple id keeps showing up on my phone and wont show the new one.
You created a new AppleID?
Why not simply update your old AppleID so you have only one iTunes account? -
7 day view of Calendar Events on the Slide to Unlock Screen???
Does anyone agree that an option to view Calendar of Events on the Slide to Unlock Screen would be a quick and easy way to review your next events and appointments?
Message was edited by: page79
Message was edited by: page79Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
Maybe you are looking for
-
Problems with user-defined update-process
Hi. I have a small problem in the right syntax in an user-defined updated process. The process is called by a button on the page and should update a record in a table. BEGIN UPDATE wam_mod_allocation SET alloc_assessment = V('P2120_ASSESSMENT'), last
-
How to run servlet and jsp in Eclipse
i am trying to run a jsp and servlet file in Eclipse its showing error in editor its self.
-
Please help how to design query to implement this requirement.
Dear Expert, Here is what I have and what the requirement is: I have a InfoCube: Dimensions: 1. Material 2. Currency Key Figures: 1. Qty 2. Amount We want to get the Qty and Amount by Material, but use Currency to be the filter. It means for example,
-
My songs are disappearing..........
I have just got this ipod for 3 months and is starts to show problems...Each time i have sync my songs to the ipod, after playing it for awhile it will stop playing by itself and all songs will disappear from the ipod. Eventhough i try resetting it,
-
Where do I find the long text for Damage and Cause in Notifications (IW21)
Hi ppl, Can anyone let me know where the long text for Damage and Cause is stored (can be seen in IW21)? Can I retrieve it through FM READ_TEXT? If yes, what are the values of the parameters to be passed? Thanks, David.