Is it possible to Clone system dr.230Gb 7200rpm drive to 150Gb 10,000 rpm?

For some reason i remember reading a artical stating that you cannot clone from bigger drive to smaller if you do it does something with the system id and you will have to re-enter serials for your software Is this true if so is there a work around?
Thanks for any info!

Thanks hatter i been doing a little research and what i want to accomplist is clone existing system drive via CCC to 10k 300GB VelociRaptor for OS and apps(thanks for recommendation),2nd drive in my g5 Quad is a 7200 500Gb seagate or maxter i really don't remember and that is dedicated for all my audio samples for music making.Then after i been doing some research i came across the "sonnet G5 Jive" for internal expansion of 3 HD's sata 1 or sata2.I realize my board is only capable of 1.5 not 3.0 which is okay for now until i make the jump in a couple of years to the mac pro.As for the 3rd drive that will be mounted in the sonnet enclosure will be another 10k 300GB Velociraptor for recording audio and completed project files.
Oh yeah in my pci e slots 1 & 2 are currently occupied by graphic cards so i have 2 slots left and on the sonnet website @ http://eshop.macsales.com/item/Sonnet%20Technology/ENCG53HD/
Includes all necessary mounting hardware and cables (SATA host controller card, such as Tempo SATA E4i or Tempo SATA X4i sold separately).
So im guessing it comes with a SATA host controller.I cannot find any info on the Tempo SATA X4i or the difference between the two.
Any help i would greatly appreciate it.
Message was edited by: joey dolce
Message was edited by: joey dolce

Similar Messages

  • Is It Possible to Clone RAID Array in a Safe and Easy Way?

    Why do computer users need to clone RAID array, especially Windows Server users need to do RAID cloning? Generally speaking, they need to clone RAID array regularly in order to upgrade disk or migrate data from small disk to a larger one. A typical
    example is that when the partitions on the hardware RAID runs out of space, you may prefer to rebuild the hardware RAID with larger hard disks. Then, you need to backup the data to another place, rebuild the hardware RAID and restore data again.
    What a time-consuming task!
    Is it possible to clone RAID array in a safe and easy way? The answer is yes and this article will introduce a RAID cloning software.

    Hi jiangchunli,
    Were you looking to post this question in some other forum? This looks like related to RAID and Disk upgrades.
    This forum is meant for
    http://www.windowsazure.com/en-us/services/recovery-manager/
    Please let us know if this is indeed Hyper-V Recovery Manager related so we can help better.
    Thanks
    Praveen
    Praveen/ www.PraveenKumar.in

  • Want to clone system drive - best approach?

    The original 160 SATA drive in my fall '04-vintage G5 dual 2 gig machine is makin' funny music. I figure the best way to deal with it is to clone it to a new drive and replace it.
    Are there utilities that help me do this? Can I just copy one drive to another, remove the old drive, and start up from the new one like nothing's changed? Or is is trickier than that?

    Hi Mike - You can either install OS X on a volume/partition of another internal or an external firewire drive - or clone your current drive if it Disk Verifies ok in Disk Utility - with CCC
    http://www.bombich.com/software/ccc.html
    or SuperDuper
    http://www.shirt-pocket.com/SuperDuper/SuperDuperDescription.html
    and then select it as the Startup disc in System Preferences > Startup Disc - or boot holding down the Option(alt) key. (Copying doesn't produce a 'bootable' drive.) Any iSight should be disconnected during cloning to a firewire drive - and you should boot and run on the cloned drive a few times to make sure it's ok.
    Please post again if you need further info.

  • How to refresh the database from target to clone system using RMAN ?

    I created the database using RMAN from target (Node A) to clone (Node B)
    I want to refresh the data what are all the changes happened in (Not complete database only chages) target to clone system using RMAN ? or any other way?

    I want to refresh the data what are all the changes
    happened in (Not complete database only chages)
    target to clone system using RMAN ? or any other way?Incremental changes can't apply, once database is open using RMAN or any other B&R method.STREAMS can be use to capture and apply changes.
    Cheer,
    Virag

  • Sending of dynpro SAPLSTRD 0300 not possible: No window system type specifi

    Hi All
    While working in ERP 6.0 EHP 3 ,navigating to Human Resources and Compensation Planning ,from there opening the Start Budget Administration .
    When trying to save the budget of any unit a BSP page is opening with following error.
    error
    ===================
    Sending of dynpro SAPLSTRD 0300 not possible: No window system type specified
    Exception
    CX_SY_SEND_DYNPRO_NO_RECEIVER
    Error Name
    DYNPRO_SEND_IN_BACKGROUND
    Program SAPLSTRD
    Include LSTRDU30
    ==================
    Can anybody pls let me know what could be reason for this?
    Regards
    Ajay

    Hi ,
    Thanks for your inputs.I had a look of this note earlier as well.
    Bu this error is not on Solution Manager and we cann implement this note.
    We are facing this on ERP system and component mentione di not in uses actually.
    Regards
    Ajay

  • Sending of dynpro SAPLSDH4 0200 not possible: No window system type specifi

    Hello All,
    We have a problem related search help of Preferred supplier. When the preffered supplier is selected, inturn we will get another screen with lot of other options.
    When the search help for Purchasing org ID is selected, we are getting the error as "Sending of dynpro SAPLSDH4 0200 not possible: No window system type specified".
    I have debugged, but did not get any clue. Could any one please let us know if any one have any idea.
    We are using SRM 6.0, Web dynpro ABAP.

    Hi ,
    Thanks for your inputs.I had a look of this note earlier as well.
    Bu this error is not on Solution Manager and we cann implement this note.
    We are facing this on ERP system and component mentione di not in uses actually.
    Regards
    Ajay

  • Sending of dynpro SAPLSPRI 0100 not possible: No window system type is spe

    Upon clicking dictionary search help PREM tagged to "Personnel Number" input field in Web Dynpro ABAP application, error message "Sending of dynpro SAPLSPRI 0100 not possible: No window system type is specified." is encountered. This error message is displayed within the message area and not a short dump. This error message is only occuring for some users.
    Does anyone knows how to resolve this error message?

    Hi,
    I thnk the search help exit is implemented in search help PREM in your system. If the code in exit in written in such a way that under some conditions it is calling any ABAP screen, it will throw error in webdynpro ABAP environment. Condition in the exit might be reaching for some users under certain cases.
    Open the PREM help in SE11 and check the function module mentioned in Search help exit section. It might also contain another call to F.M which might be calling a ABAP screen. If this is the case, this error cannot be fixed as WD ABAP dont support ABAP screen call.
    Regards
    Vishal kapoor

  • Possible migration(Heterogeneous system copy) combination

    Dear all
    Currently we're planning to do Heterogeneous system copy
    from the following source(current system) and target.
    Source : R/3 4.6C + Oracle 8.1.7 on AIX 4.3.3
    Target : R/3 4.6C + Oracle 10.2 on Windows 2003
    For the target system, i checked the PAM in Service Marketplace
    and it seems that R/3 4.6C + Oracle 10.2 on Windows 2003 is supported.
    But i'm not sure whether this source - target combination is possible
    in Heterogeneous system copy.
    To summarize, here are 2 questions.
    1) Where can i find Heterogeneous system copy combination?
    (OS/DB combination which supports Heterogeneous system copy in R/3 4.6C)
    2) Is the above Source - Target combination is possible?
    Best Regards.
    Ahn

    > Source : R/3 4.6C + Oracle 8.1.7 on AIX 4.3.3
    > Target : R/3 4.6C + Oracle 10.2 on Windows 2003
    Yes - this is possible and supported. But keep in mind:
    - you must have a certified migration consultant doing the migration. If you do it on your own, you'll loose support for problems during the migration and for the target system --> SAP will bill help (see http://service.sap.com/osdbmigration --> FAQ)
    - 4.6c is out of general support; you may need to buy extended support to get the migration kit
    Markus

  • My mac mini does not boot, after backing the enire system onto an external drive with Carbon Copy Clone

    My Mac Mini does not boot, after backing the enire system onto an external drive with Carbon Copy Clone. I had switched the start-up disk back to the original of course. Now all I see is the Apple logo. What should I do? Thanks in advance.

    Try disconnecting any external devices, especially hard drives
    and try rebooting.
    If that doesn't help, then :
    If you are running Lion, boot to the Recovery HD and run a
    Repair Disk on the OSX partition.
    If Snow Leopard, boot to the installl DVD and run Repair Disk.
    Also, you may want to bookmark this:
    http://reviews.cnet.com/8301-13727_7-57345273-263/troubleshooting-the-boot-proce ss-for-intel-macs/?tag=txt;title
    for future reference.  It is a pretty good explanation of the
    Mac boot process and how to identify where problems may be.

  • Authorization creation by ODS((0TCA_DS01) not possible on PRD system

    Hi friends,
    I am setting the authorization values by using ODS(0TCA_DS01)(uploading file data to the ODS and then creating it via RSSM). But it is not possible on PRD system on which system is set as "No change to repository cross-client customizing objects".
    Are there good solution to set the authorization values by ODS method on PRD system?
    Kind regards,
    Masaaki

    Go to /nsu53 and see if u have no authorization in PRO then go to DEV assign authorization & then transport the same to Production.

  • Is it possible to clone an object from one image and paste it on another image?

    Is it possible to clone an object from one image and paste it on another image in Aperture?

    As Frank said,
    but Aperture has a nice clone tool - the drawback is, that it only works within one image.
    What I sometimes do - as a workaroud, when I want to use the clone brush, is to combine the image I want to clone from and the image I want to clone into, into one single image by printing them together to pdf as jpeg. Then I can clone from the second to the first, for example, to be able to add an fairy to a flower: Picking up the head of the fairy in the right image and brushing it into the left one. Occasionally I prefer the Aperture brush to the Photoshop lasso.

  • Is it possible to clone an instance without any data?

    Hi,
    Is it possible to clone an instance without any data?
    Say I want to clone an instance to make a new instance on some other server so that the new clone will be same like a fresh installation without any customization and data in it.
    Thanks

    EBS with empty database
    One option you have is to do another fresh install, apply all of the patches that have been applied on the current instance, then use iSetup to migrate your setups from source to target.
    http://docs.oracle.com/cd/E18727_01/doc.121/e12899/toc.htm
    HTH
    Srini

  • Is it possible to clone an iphone

    is it possible to clone an iphone

    No. That is not possible.
    You can track iMessages and email, but that's about it. Not calls, or texts.
    You can get call and text metadata from your carrier's website online account management. Just like NSA.

  • I want all possible router & switch system error messages

    I want to research about system message classication topic
    so I want all possible router & switch system error messages
    Could you send it me?
    Kind regards.
    -- Meta --

    Dear Grace
    Are you using EOIO for this scenatrio.
    In this case you have to cancel/delete the first message which is in holding state.
    If you are not using EOIO and still the messages are in holding state then the receiver system must accept the message (in your cae the DB)
    Regards
    Sourabh

  • Possible to clone BO XI server to another machine with different ip

    Hi,
    Is it possible to clone BO XI (Windows) to another wintel server (different config), with different hostname and IP address ?
    Assuming, we will use the same database repository (only the destination machine has different hostname and IP).

    It will use names of the servers it created during installation. What version of BOE are we talking about here ?
    If it's R1/R2 - in CMC after repointing, you will see new servers and old ones, you delete old ones and you're good to go.
    With Xi3.1 it's a little more complicated (see many threads on this forum) but same in principal. On new install you create new SIA pointed to the original CMS DB etc...
    Import Wizard aproach is actualy even more safe, but little slower.

Maybe you are looking for

  • Ghost files in C6

    2 examples. I had deleted a file while in mass storage mode using windows explorer from the memory card. Now in the photo/image file view application, its file browser insists that the file exist but when I look into the details, there location is bl

  • Subsequent credit Number ranges

    Hi Guys, We are running the t.code MIR6 for posting the invoice documents. Now the requirement is they need a different document types for Invoices and credit memos. In MM we can assign a document type to transaction in Logistics Invoice verification

  • NI DAQmx Digital Output Trigger To Start Analog Input Task

    Hi everyone.  I am using the NI DAQmx VIs to set a digital output line low (boolean '0').  I want to begin reading an Analog Input voltage (Start Analog Input Voltage reading task) right after the digital output line is set low.  I am using the DAQmx

  • Account Problems

    I can't buy anything because I forgot my security question answers. Can I gain back my answers?

  • Speedgrade 2014.1 crashes on startup when dual display outpout is enabled

    Just updated to Speedgrade 2014.1 and I got the "Adobe Speedgrade 2014 has stopped working" message right after the splashscreen. After I uninstalled and then reinstalled it, it worked fine. So I loaded up my custom settings and did some grading. Aft