Is it possible to configure CF10 or CF11 to use Xerces XML parser instead of Saxon XML parser?

Could anyone tell me if it is possible to configure CF10 or CF 11 to use the older Xerces XML parser instead of the Saxon XML parser.
I am in the process of migrating a website from CF8 to CF11. Several sections rely on XML transformation, which no longer work in CF11. After investigating the problem it seems to be that the Saxon Parser is more strict, causing these errors.

Well I guess Parsers would be better solution. As u said u need to insert node at specific location.
so now u have to decide which parser u need to choose according to u r requirmnet. DOM or SAX maily.
Both has adv and di-advs.
...yogesh

Similar Messages

  • CF10 or CF11 and Java 8??

    Hello, everyone,
    Since Java 7 EOL is fast approaching (April, as I understand it), I have been tasked with doing research to determine the viability of CF10 or CF11 and Java 1.8.
    I've been seeing a LOT of complaints about Java 8, update 31, in forums.
    Regardless of update version, has anyone experienced any issues with Java 8 as it relates to ColdFusion Server versions 10 or 11?
    We are looking at having to upgrade before April, and need to know of any pitfalls that others have experienced, or if there is anything specific that needs to be done in order to make it a smooth transition.
    All valid input greatly appreciated.
    V/r,
    ^_^

    Guys, it’s update 14 that adds support of Java 8 (aka 1.8) to CF10 (and update 3 for CF11). For details, see:
    http://blogs.coldfusion.com/post.cfm/which-jdk-is-supported-with-coldfusion-9-10-and-11
    Also, as for CF running with Java 8, besides those who may have changed the setup for CF to use it after those updates above, note that CF11 as downloaded now and the past month or so has come with Java 8 preinstalled and preconfigured. I work with many (many) people who are running CF11 in production configured that way and I’ve not run into any problems that were shown to be due to Java 8 itself.
    (That said, do beware if you may see people complaining of it, to make sure that they are running one of the supported updates of CF 10 or 11.)
    Finally, as for your saying you “cannot access Solr under our DEV CF10's if Sandbox is on”, is this different from the problem you had with Solr that we solved when the sandbox was setup correctly (https://forums.adobe.com/thread/1673581)?
    /charlie

  • Is it possible to configure a smartform in QGA3 instead of the standard script QM_INSP_RESULT.

    Is it possible to configure a smartform in QGA3 instead of the standard script QM_INSP_RESULT.

    Hello ,
    I'm afraid not , the program for the transaction is admitting only Sapscript format , even the BADI
    QG_INSP_RESULT_PRINT allow to switch to a SAPscript form
    Regards

  • Possible to configure per connection timeout values?

    hi,
    please, does anybody know how (or whether or not it is even possible) to configure a "PER CONNECTION" timeout on the connections - created by jndi - to an ldap server?
    my understanding is that setting the "com.sun.jndi.ldap.connect.timeout" property on the javax.naming.directory.InitialDirContext sets a _global_ timeout value for _all_ connections created/managed by that InitialDirContext (that is, with a "PER CONTEXT" scope).
    however, what i would like to do instead, is somehow configure a different timeout value for each individual connection that a InitialDirContext might know about.
    the first solution that will probably pop in your head is "connection pool". however, the app sets "java.naming.ldap.factory.socket" property to a custom socket factory class. according to the following paragraph from the jndi tutorial, that disqualifies the app from using connection pools:
    "There are a couple of environment properties that automatically disqualify a Context instance from using a pooled connection. A Context instance cannot use a pooled connection if it has its "java.naming.ldap.factory.socket" property set to a custom socket factory class, or its "java.naming.security.sasl.callback" property set to a custom callback handler class, or its "com.sun.jndi.ldap.trace.ber" property set to enable protocol tracing."
    http://java.sun.com/products/jndi/tutorial/ldap/connect/config.html
    even if we could use connection pools, we still wouldn't be able to set "per connection" timeout values. would we?
    one proposed solution is to completely rip out jndi from the app and replace it with the netscape directory sdk for java. to me, that seems like too drastic a measure though - given the project's time-constraints (the way the app was originally designed does not lend itself to a straight-forward "pop-out/drop-in" type replacement). i was hoping there would be a simpler alternative (a jndi-based configuration type solution, for example).
    any suggestions would be gratefully appreciated. thanks in advance for your replies.

    Enable the Default Host option in the AirPort Admin Utility, use the IP address you have assigned to your server.

  • Is it possible to configure Outlook 2010 as the Default Mail client if it is presented to the Desktop via RemoteApp?

    I am a user of RemoteApps. I connect to a Website that presents me with various applications, include Outlook 2010. however, I use other programs that I need to send mail from that are in within the RemoteApp workspace. Is it possible to configure windows
    7 to map a call to RemoteApp/Outlook2010 to send mail as a default mail client? or Perhaps a way to get OWA to map as a default mail client handler?
    I am using Windows 7 SP1 - Updated to latest service releases, Outlook 2010 from RemoteApps, and IE 11.
    Thank you in advance!

    Hi Raymond,
    Based on my research, we can use Group Policy and Internet Options to configure default mail client.
    How to make Outlook the default mail client
    http://support.microsoft.com/kb/223877/en-us
    How to configure the default e-mail client using Group Policy
    http://support.microsoft.com/kb/2008044
    Best Regards,
    Amy
    Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

  • Vmware wsx is it possible to configure language for keyboard like AZERTY ?

    vmware wsx seems to be wonderful application for the future
    but it is possible to configure keyboard for differents countries like French...

    You should ask this on https://mail.mozilla.org/listinfo/mobile-firefox-dev instead of a end user forum. It may require building a custom APK of Firefox.

  • Is it possible to configure IDOC with Business service

    hi
    Is it possible to configure IDOC with Business Service
                          Thanking you....
                                                                         aravind...........
    <Interview question locked, please read the [Rules of Engagement|https://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement]>
    Edited by: Mike Pokraka on Sep 18, 2008 9:25 AM

    Hi Chary,
    Check this
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e07dcaa0-a92b-2a10-3a96-b3d942bd1539
    Regards
    Seshagiri

  • Is it possible to configure Webdynpro in Netweaver ABAP/JAVA trial version.

    Hai, all
    Can anyone clear me that, is it possible to configure Webdynpro in Netweaver ABAP and Netweaver JAVA trial versions.

    Hello Senthil ,
    It possible to configure Webdynpro in Netweaver ABAP trial version.
    SAP NetWeaver 7.0 ABAP Trial Version (incl. Web Dynpro ABAP) is available on SDN Download .
    <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/downloaditem?rid=/library/uuid/cfc19866-0401-0010-35b2-dc8158247fb6">to Download !</a>
    Regards ,
    Santosh

  • Is it possible to configure Webdynpro in Netweaver ABAP/JAVA trial vers

    Is it possible to configure Webdynpro in Netweaver ABAP/JAVA trial version.

    Hello Senthil ,
    It possible to configure Webdynpro in Netweaver ABAP trial version.
    SAP NetWeaver 7.0 ABAP Trial Version (incl. Web Dynpro ABAP) is available on SDN Download .
    <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/downloaditem?rid=/library/uuid/cfc19866-0401-0010-35b2-dc8158247fb6">to Download !</a>
    Regards ,
    Santosh

  • Possible to configure HLS segments with different URL than governing M3U8 playlist?

    Currently we have 4 AMS servers with VOD applications for RTMPe and HLSe. These are load balanced by round-robin DNS, such that any request to VOD content could hit one of 4 servers depending on the DNS record served (DNS TTL=5mins).
    RTMPe works fine 100% of the time. We are having intermittent issues with HLSe and IOS devices in that randomly the stream will stop in our player (Brightcove based). Player logs seem to indicate requests to HLSe segments showing as not found/error when the content freeze occurs.
    My initial guess is that requests to VOD content may come from one AMS server and contain segment URLS also based on the DNS round robin hostname, then potential mid-playlist the DNS updates and you request the next segments from another server, potentially causing issues(??).
    e.g.
    Playlist:
    http://DNS-RR-HOSTNAME/mycontent.m3u8 - DNS resolves to AMS01, playlist served by AMS01
    Segments:
    http://DNS-RR-HOSTNAME/mycontent-seg01.ts - served by AMS01
    http://DNS-RR-HOSTNAME/mycontent-seg02.ts - served by AMS01
    http://DNS-RR-HOSTNAME/mycontent-seg03.ts - served by AMS01 (DNS flips to AMS02).
    http://DNS-RR-HOSTNAME/mycontent-seg04.ts - served by AMS02
    http://DNS-RR-HOSTNAME/mycontent-seg05.ts - served by AMS02
    Could this situation potentially cause player to halt playout? Is it possible to configure AMS to serve the HLS segments using a different hostname, whilst still being able to serve the playlist from the DNS RR hostname. This way the playlist would return a list of segments direct from the server that served the initial playlist. e.g.
    Playlist:
    http://DNS-RR-HOSTNAME/mycontent.m3u8 - DNS resolves to AMS01, playlist served by AMS01
    AMS01 serves segments with hostname of itself only:
    Segments:
    http://AMS01-DIRECT-HOSTNAME/mycontent-seg01.ts
    http://AMS01-DIRECT-HOSTNAME/mycontent-seg02.ts
    http://AMS01-DIRECT-HOSTNAME/mycontent-seg03.ts
    http://AMS01-DIRECT-HOSTNAME/mycontent-seg04.ts
    http://AMS01-DIRECT-HOSTNAME/mycontent-seg05.ts
    Playlist:
    http://DNS-RR-HOSTNAME/mycontent.m3u8 - DNS resolves to AMS02, playlist served by AMS02
    AMS02 serves segments with hostname of itself only:
    Segments:
    http://AMS02-DIRECT-HOSTNAME/mycontent-seg01.ts
    http://AMS02-DIRECT-HOSTNAME/mycontent-seg02.ts
    http://AMS02-DIRECT-HOSTNAME/mycontent-seg03.ts
    http://AMS02-DIRECT-HOSTNAME/mycontent-seg04.ts
    http://AMS02-DIRECT-HOSTNAME/mycontent-seg05.ts

    the link http://localhost/awstats/awstats.pl started opening.
    the problem was the permission of the directories  in /usr/share/webapps/awstats/ i changes 755 then it started working

  • Is it possible to delete message in the server using Mail configured using IMAP?

    Is it possible to delete message in the server using Mail configured using IMAP?
    Currently when I delete the message in Mail, the server still keep a copy of it, which means it is not deleted on the server. I know that POP can do this but I still want the option of being able to access it from other computers.
    My server has only a small size, so I hope that I can just delete it from my Mail instead of having to log in to the server and delete it again.
    Thank you.

    yxchng wrote:
    Is it possible to delete message in the server using Mail configured using IMAP?
    Yes, but doing so will remove it from everything else.

  • It is not possible to configure the selected XI domain

    Hi...
    PI 7.0 server on Windows environment and database is SQL Server.
    PI Server pick and place the messages from r/3 to r/3 in Oneway but in the reverse it is pick the messages from source but it is not place to the target system.
    The error messsage in RWB in end to end monitoring...
    It is not possible to configure the selected XI domain because the Integration Server does not exist or could not be read from the SLD
    In Component monitoring...
    500 internal server error
    Application error occured during repuest processing..
    Thnx
    Raj

    Thanks for your promp response, tbluong.
    The configuration in SXMB_ADM > Integration Engine Configuration is already done and its check (F7) returns success (all green): "Role of Business System: Current Configuration = System Landscape" and "Corresponding Integration Server: Current Configuration = System Landscape".
    Any suggestion?
    Regards.

  • Possibility to configure Freedome VPN connection on unsupported devices

    I have this idea, which I think would be useful in this world of many different OSes:
    I suggest that you would make it possible to, for example, configure the VPN connection on Windows Phone. Windows Phone has the possibility to configure VPN profiles at the settings, and so do many other OSes that are not supported by Freedome. This would also solve the problem of having no VPN on Linux. Of cource it wouldn't be as easy as pressing a big button, but many privacy-aware users would benefit from it. 

    Hi Jay,
    So, when you say you need to connect your website to your Local Network, is your website a Paas instance or a IaaS instance, i.e., website hosted in a VM using IIS?
    Do you have a single instance of the website or multiple instances that have been added to a VNET and need to be connected to the On-Premise Network?
    What VPN device are you using to connect Azure to On-Prem?
    If you have one website instance that needs to connect to an On-prem network Point-to-Site (P2S) connection would make sense. However, if you have multiple instances of your website in a VNET you would need a Site-to-Site (S2S) connection.
    Please be advised that only devices that support Dynamic Routing Gateway would work when configuring P2S connections.
    Regards,
    Malar.

  • Buy CF11 and use CF10 - Downgrade CF11 Key

    Hi,
    We buy CF11 and use CF10.
    Now our CF11 Key is not working... Can I change the Key to CF10 Key?
    Thanks in advanced

    You should be able to use CF11 license key with CF11 installation again.
    For how many users, you registered for CF11 license key?
    Cross-check, you are using this CF11 license key on the same kind of CF11 installation as the license key is eligible for.

  • Possible to configure several communication channels for the same receiver?

    Hi,
    is it possible to configure several communication channels for one (the same) receiver?
    The problem is as follows: I would like to switch between the RFC-channel and the XI-channel, if the RFC-Adapter doesn't work for some reason.
    The situation: Our XI3.0 posts messages to several receivers and the switch should be done by changing one table entry which is selected and analysed in an ABAP-Proxy and which could enrich the XML-message. By now, the only chance I see is to change the respective entries in the Integration Directory for each receiver separately.
    Thanks for your help, Peter.

    Hi,
    >>>>But to be honest: Is it elegant to double the receivers?
    of course not:)
    but this is the only way I believe
    (cause you cannot assign conditions to receiver agreements)
    you could also create two messages (practically two flows)
    but would it be more elegant?
    BTW
    in my opinion you should try restarting RFC channel
    and not create two - just in case...
    if RFC doesn't always work why don't you use another one only?
    this would just simplify your scenario (maintanance of just a number of communication channels and not 2 x number of communication channels)
    Regards,
    michal
    Message was edited by: Michal Krawczyk

Maybe you are looking for