Is it possible to connect to 2 different subnets using the wired/wireless with the 1525nw?

I have a client that just bought a new cp1525nw printer. The problem is that they would like to be able to use it inside there network but also make it available to visitors. Is it possible to use the wired NIC on the internal network and the wireless NIC on there guest network?

No, sorry, it won't work.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Similar Messages

  • HT1807 I travelled to a different country & using a new sim; with the change in sim, I have been unable to use iMessage & FaceTime. Cant replace replace the earlier no with the current one and it reads error. how to correct this?

    I traveled to a different country and using a new sim/new carrier. With the change in the sim, I have been unable to use the iMessage--outside of WiFi coverage area, and FaceTime at all time. I believe it is due to the phone number registered as an address in the phone, which has not changed with the change of sim; so it countinues to showing as an error while varifying the data.
    Wonder if any of you are in a position to advise as to how to address the following.
    1. I need to input correct phone no, meaning the number I am using in the correct location.
    2. I need to activate FaceTime and be able to use it.
    3. I need to be able to use iMessage and/or ordinary sms while outside of WiFi coverage area.
    It may be mentioned in my current location I don't have GPRS on the cell phone which is the case in my regular station.
    Thanks for your help.

    for #1
    Frequently asked questions about Apple ID - Apple Support
    I have multiple Apple IDs. Is there a way for me to merge them into a single Apple ID?
    Apple IDs cannot be merged. You should use your preferred Apple ID from now on, but you can still access your purchased items such as music, movies, or software using your other Apple IDs.
    If you are wondering how using multiple Apple IDs relate to iCloud, see Apple IDs and iCloud.
    for #2
    Apple does not accept unsolicited ideas see Apple - Legal - Unsolicited Idea Submission Policy

  • Is it possible to connect to two different clusters?

    Hi,
    I was wondering if it was possible to connect to two different clusters from the same process?
    What I would like to do is to able to get some cache on the first cluster and others on a second cluster. The cache-config DTD doesn't seem to forbid the definitions of several remote-cache-scheme. So I should be able to map all "c1-*" caches to the first cluster and all "c1-*" caches to a second cluster...
    Is it possible?

    Thanks,
    Yes I'm connection via extend.
    Could you give me an example of such configuration? I've made a test from a C++ client with the following client config:
    ====================================================================
    <?xml version="1.0"?>
    <!DOCTYPE cache-config SYSTEM "cache-config.dtd">
    <cache-config>
    <caching-scheme-mapping>
    <cache-mapping>
    <cache-name>c1-*</cache-name>
    <scheme-name>extend-1</scheme-name>
    </cache-mapping>
    <cache-mapping>
    <cache-name>c2-*</cache-name>
    <scheme-name>extend-2</scheme-name>
    </cache-mapping>
    </caching-scheme-mapping>
    <caching-schemes>
    <near-scheme>
    <scheme-name>near-c1</scheme-name>
    <back-scheme>
    <remote-cache-scheme>
    <scheme-ref>extend-1</scheme-ref>
    </remote-cache-scheme>
    </back-scheme>
    <invalidation-strategy>auto</invalidation-strategy>
    </near-scheme>
    <near-scheme>
    <scheme-name>near-c2</scheme-name>
    <back-scheme>
    <remote-cache-scheme>
    <scheme-ref>extend-2</scheme-ref>
    </remote-cache-scheme>
    </back-scheme>
    <invalidation-strategy>auto</invalidation-strategy>
    </near-scheme>
    <remote-cache-scheme>
    <scheme-name>extend-dist</scheme-name>
    <service-name>ExtendTcpCacheService</service-name>
    <initiator-config>
    <tcp-initiator>
    <remote-addresses>
    <socket-address>
    <address system-property="tangosol.coherence.proxy.address">ldnpsm020001413</address>
    <port system-property="tangosol.coherence.proxy.port">4321</port>
    </socket-address>
    </remote-addresses>
    <connect-timeout>10s</connect-timeout>
    </tcp-initiator>
    <outgoing-message-handler>
    <request-timeout>5s</request-timeout>
    </outgoing-message-handler>
    <serializer>
    <class-name>com.tangosol.io.pof.ConfigurablePofContext</class-name>
    </serializer>
    </initiator-config>
    </remote-cache-scheme>
    <remote-cache-scheme>
    <scheme-name>extend-paul</scheme-name>
    <service-name>ExtendTcpCacheService</service-name>
    <initiator-config>
    <tcp-initiator>
    <remote-addresses>
    <socket-address>
    <address system-property="tangosol.coherence.proxy.address">ldnpsm020001412</address>
    <port system-property="tangosol.coherence.proxy.port">4131</port>
    </socket-address>
    </remote-addresses>
    <connect-timeout>10s</connect-timeout>
    </tcp-initiator>
    <outgoing-message-handler>
    <request-timeout>5s</request-timeout>
    </outgoing-message-handler>
    <serializer>
    <class-name>com.tangosol.io.pof.ConfigurablePofContext</class-name>
    </serializer>
    </initiator-config>
    </remote-cache-scheme>
    </caching-schemes>
    </cache-config>
    ========================================================================
    if I do a CacheFactory::getCache("c1-Test"), the log shows a connection to the 1st cluster
    if I then do a CacheFactory::getCache("c2-Test"), the log shows a connection to the 1st cluster and not to the second cluster
    What did I do wrong?

  • Is it possible to connect an HP LaserJet P4015n printer to a computer via the ethernet ports?

    My usb port on my Laserjet P4015n no longer works and I am unable to connect this printer to my network router because it's in a different room. Is it possible to connect an HP LaserJet P4015n printer to a computer via the ethernet ports? Of so, how would I go about making this connection? Will I need to install ethernet drivers for this to work?
    Thanks,
    Greg

    This seems to be a commercial product. For the best chance at finding a solution I would suggest posting in the forum for HP Business Support!
    You can find the Commercial Laserjet board here:
    http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
    Best of Luck!
    You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

  • HT3669 I have an imac running OS10.6.8 and an Apple laserwriter 16/600PS.  Is it possible to connect these directly without networking?  Where can I find the printer driver?

    I have an imac running OS10.6.8 and an Apple laserwriter 16/600PS.  Is it possible to connect these directly without networking?  Where can I find the printer driver?

    It turned out that WD is the big bad guy in this game.
    According the data rescue company where I asked for an inspection, both of the drives had their reader head loose. And in the one, which was my already-in-use disk its even damaged the platters... xxxxx
    So its time to pay bunch of money to recover, and take a walk to wd service to bang on the desk.
    Also note - it may be somehow related to intellispeed technology - since macs not really friendly with wd-s built-in solutions.
    On the other hand, with WD GP 1Tb there is no problems at all for ages.
    thanks guys, thread is closed

  • I cannot connect my iPhone 4S to my home wifi. When trying to connect it says I have the wrong password, but I can connect my MacBook to the same network with the same password. I have tried to restart my router, reset my network settings, fail!

    Hello, I am having some major troubles connecting my iPhone 4S to my home wifi. When I try to connect on my phone, it says I have an incorrect password. That's not possible because I can connect my MacBook to the same network with the same password. I have reset my network settings on my phone, reset my router, called apple support, triple checked I was trying it in correctly, I have no clue what's going on.
    The only thing different is I just moved, but I have the same router/phone/internet provider.
    I've seen some discussions of router security options being the problem, I have my router connected to : WPA-PSK [TKIP] + WPA2-PSK [AES].
    The other options are: WEP , WPA-PSK[TKIP] , WPA2-PSK [AES] , WPA/WPA2 Enterprise.
    My troubleshooting and understanding of all this is pretty limited, my applecare service did not help, please can anyone help me?
    Thanks!

    If the issue happened after an update, you may want to go into an Apple Store. Be sure to let them know exactly what's wrong with the device.

  • How to apply different keyboard shortcuts to an actions with the same name but in different menus within one application?

    Hi,
    Hopefully someone can help. I have the application "djay" and in two different menus there is the action "Eject". I was wondering if it's possible to apply different keyboard shortcuts to those actions with the same name? I can't see how to do it as it seems you can only write the action but as there are two it doesn't seem to work for me.
    For example:
    djay>Table-1>Eject - ⌘⇧1
    djay>Table-2>Eject - ⌘⇧0
    Thanks in advance for any help!!

    A NodeList doesn't only contain 1 element. In your example it contains ALL <Data> elements inside the document.
    NodeList nodes = document.getElementsByTagName("Data");
    System.out.println(nodes.getLength() + " \"Data\"-elements found");
    for(int i=0; i<nodes.getLength(); i++) {
       Node node = nodes.item(i);
    }

  • I have an iPod nano v4 or 5 and when I connect it to my Hyundai Santa Fe I get an iPod loading error message.  The cable came with the car when I purchased it and the dealer was able to get it to work with his newer ipod.  Please advise.

    I have an iPod Nano v4 or 5 and when I connect it to my Hyundai Santa Fe I get an iPod Loading error message.  The cable works with the dealer's iPod which is a newer model.  The cable came with the car when I purchased it.  Please advise.  Thanks.

    Hi Bander Bunny!
    I have a couple of articles that should be able to help you troubleshoot this issue a little further. You may want to try uninstalling and reinstalling iTunes first. This has to be done in a specific manner, and this article can help you do that:
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    http://support.apple.com/kb/ht1923
    Another option is that you may want to try syncing your iPod nano manually. Here's is an article that pertains to manually managing the content of your iPod nano:
    Managing content manually on iPhone, iPad, and iPod
    http://support.apple.com/kb/ht1535
    It's also possible that this issue resides with your iPod nano. Here is a website that will help you troubleshoot the iPod nano:
    Apple - Support - iPod Troubleshooting Assistants
    http://www.apple.com/support/ipod/five_rs/
    Thanks for using the Apple Support Communities. Have a good one!
    -Braden

  • HT5019 I connect my macbook pro to an Epson wireless projector. The macbook can see the projector wirelessly and the image on the macbook is displayed on the projector. However on system ref., the arrangement tab does not show and thus cannot have multipl

    I connect my macbook pro to an Epson wireless projector. The macbook can see the projector wirelessly and the image on the macbook is displayed on the projector. However on system ref., the arrangement tab does not show and thus cannot have multiple view.
    I am trying to project Pro Presenter on the Epson projector such that I have the detail screen on the macbook and only the screen I want people to see on the projector display. This has not been possible because the arrangement tab on the Display section of the System Preference is not showing. If i tried to search for the arangement, it comes back with the message that there is not other source detected, hence the arrangement tab is not showing.
    I have also tried to connect the Epson directly to the Macbook but it still the same result, so its not because it is a wireless connection. Can someone advise me jhow to go around this problem. I have used windows before and it is very easy to extend ptojection on windows, but this system seems to be frustrating to me.
    Thanks,
    Toks

    Hi Toksyb!
    You may want to try clearing out the PRAM on your computer. This process is explained through this article:
    About NVRAM and PRAM
    http://support.apple.com/kb/ht1379
    Thanks for using the Apple Support Communities!
    Cheers,
    Braden

  • Connect the music file with the artwork file post-computer-crash?

    I want to retrieve artwork after restoring my computer?
    So my computer (where itunes app data was stored) and my external hardrive (where my itunes library was stored) crashed, but luckily I had my itunes library was stored on dropbox so I have that uploading to my revived computer!
    I have access to all my "old computer's" files (via a mounted image file that looks just like an external drive H: )
    The "old computer" itunes used my dropbox folder for the library (J:work\Dropbox\Allen's Transfer Folder\iTunes)
    my "New comuter" uses a local folder but the contents are exactly the same (C:\Companies\Dropbox\Allen's Transfer Folder\iTunes)
    How can I get the artwork data from my "old computer" onto my "new computer" so that itunes will connect the music file with the artwork file?
    is there a data file and will they automatically sync to the artwork if they are in different locations?
    Thank you for your help, Allen

    pfanzier wrote:
    … is there any reason i shouldn't delete the artwork folder?
    All of my music is from CDs, so all of my cover art are scanned images that I added to the music files in iTunes. My Album Artwork folder is heavily populated nonetheless. Thus, it stands to reason that if you delete the folder, just like every other default item in your iTunes folder it will be recreated when you launch iTunes. If I recall correctly, that folder also holds the data files for building your CoverFlow.
    pfanzier wrote:
    itunes only demarcates songs whose files are missing with an exclamation point after i click on the song. otherwise everything appears as normal. if i quit itunes and reopen it, nothing is marked with the exclamation point until i click on it.
    I personally have never had an issue with missing song links, but based on what I had read on the Macworld forums over the years, when links are lost, people start seeing /!\ next to several tracks in their iTunes library. Of course, most of the instances that I have read about have been after iTunes updates so perhaps it is during the library updating after a software update that causes the automatic detection of broken links. Otherwise, it does make sense that iTunes would not check a link until the user selects an unlinked song, because iTunes does not, and should not, scan your entire library for no apparent reason.

  • When streaming a movie with the new Apple TV, and using a DSL Internet connection, all audio sound works, e.g., the music track, but the audio track with the actor's voices, does not work. What can I do?

    When streaming a movie with the new Apple TV, and using a DSL Internet connection, all audio sound works, e.g., the music track, but the audio track with the actor's voices, does not work. What can I do?

    Hi Brian,
    Thanks restoring and restarting didn't fix my problem - i have started it fresh and still it doesn't work. Basically I press ONCE on the remote, after the machine has not had any commands for 10 minutes, and the cursor skips from one end of the menu to the other - so I can't choose network or update software etc - I sometimes manage to stop it randomly in the middle of the menu if I press on a command in the middle of the cursor skipping all the menu steps...not sure what the problem is but I have basically not used my brand new apple tv since I bought it for that reason! I should call Apple support I suppose! grrrr hate wasting time with stuff like this!
    Thanks for your help though!
    Pernille

  • I recently purchased FaceTime from the Application Store. After approx. ±10 meg, the application resets and starts downloading again. I have tried to download it at different times of the day but with the same results. I have been in contact with Apple su

    I recently purchased FaceTime from the Application Store. After approx. ±10 meg, the application resets and starts downloading again. I have tried to download it at different times of the day but with the same results. I have been in contact with Apple support and have tried different options with the same result. I cannot download a new Version because in my Purchased List the applicaiton (FaceTime) is still there, and because I have halted it it tells me to resume. I can’t, because the same thing is going to happen. I have tried all the various troubleshooting tips supplied by my ISP and also Apple Support with no luck. I am currently working on a IMac OS 10.6.7. Has anybody got any ideas? Any suggestion would help. Thanks

    Amol Soni wrote:
    As I said, I tried everything what the manual says, but hard luck. I have taken an appointment for today, lets see what happens.
    Also there is no activity on unit when I use the remote. The unit is stuck on the first page itself where we have to choose the language. The unit seems to be fine to me but the real problem is remote does'nt have activity. The IR is not responding while pressing any of the button.
    Good luck with your appointment.
    Not much consolation but even new products can have issues and might need a trip to a store to return/replace.
    The reason i asked about the LED on the AppleTV is that occasionally it thinks it's paired with a specific remote and ignores others - the unpair keypress I described is quick and free.
    AC

  • I tried to install the new iOs 7 on my iphone 4, but it wasn't completed (showing error 4005). Now, my iphone is stuck on the itunes' logo with the usb cord, and I can't use my phone. And itunes doesn't detect my iphone when I connect it on my computer.

    Hi everyone! I tried to install the new iOs 7 on my iphone 4, but it wasn't completed (showing error 4005). Now, my iphone is stuck on the itunes' logo with the usb cord, and I can't use my phone. And itunes doesn't detect my iphone when I connect it on my computer, so I can't put it in recovery mode or someting like that... What can I do?? I tried everything they tell me to do in the apple support but nothing seems to work. Thank you!

    No problem, glad to help!
    Update: my PC USB hub was connected to a USB 3 port, I connected the 30 pin cable directly to my PC, And the restore worked just fine. Restored phone from iCloud backup and seems to be working fine.

  • My ipod 60gb classic is showing as fully charged until I connect it to my pc when it comes up with the error message, 'please wait very low battery' and the little wheel goes round and nothing happens, can anyone explain why this is and what i can do?

    My ipod 60gb classic is showing as fully charged until I connect it to my pc when it comes up with the error message, 'please wait very low battery' and the little wheel goes round and nothing happens, can anyone explain why this is and what i can do?

    I have worked my way through the assistant and nothing works. I have tried connecting in disc mode but although the screen on the ipod is showing that the device is charged and that it is in disc mode as soon as I connect it to the computer it comes up with the error message 'please wait very low battery' and stays like that until I disconnect when it appears to be OK again. I have tried on both pc and mac.
    BTW the ipod is an ipod video not classic if that makes any difference.
    Thanks

  • I have garagaband for iOs in my iPhone 4S, I connect my squire iOs guitarr to the iPhone, I select a Guitar Amp at the GB app then I Only can tune the guitar but I m not able to make the guitar ring with the amps. May some one help me?

    I have garagaband for iOs in my iPhone 4S, I connect my Squire iOs guitarr to the iPhone, I select a Guitar Amp at the GB app then I Only can tune the guitar but I m not able to make the guitar ring with the amps. May some one help me?

    You got the new iphone?????   I have same problem.  I transferred audiobooks to device to find no audiobooks on device (despite it being in iTunes as if it was).  Have you found a solution?????   I even tried to change import settings on format transfer but hasn't worked. 

Maybe you are looking for

  • Std workflow for Parked Invoices?

    hi guys are there any std workflows for parked invoices? Our requirement is that once the Finance clerk creates a customer or vendor invoice he should only be able to park it and not post the invoice. Once the invoice is parked then the system should

  • Erase to FAT16

    If a SLR camera flash card needs to use FAT16 and be formatted in FAT16 is it possible to do that using Disk Utility or does that only erase in FAT32 format? Currently to format the flash card it needs to be done on a PC. The Mac recognizes FAT16 but

  • Related to display problem

    sir when i start my laptop then monitor intensity is very low its not visible but sometimes its working properly  with fluctuation but good....whats the solution plz mail me ...thanks for seeing my problem

  • PCA for balance sheet AR / AP

    Dear All, Please give a possible solution urgently. In 3KEH balance sheet accounts are assigned to default PC's i.e. in case for revenue and cost allocation at the time of invoice posting if any B/S accounts are assigned as account determination but

  • Oracle JDev 10g with OAExt for Release 12 now on Metalink

    The much awaited Oracle Jdev 10g with OAExt for Release 12 is now available on metalink through patch 5856648. Note : This jdev build will only work with the Oracle Apps Release 12 env and should not be used against a 11.5.10 env.