Is it possible to create a customs declaration for the document which is cleraed from customs

Hi Experts,
I want to generate a custom declaration for the declaration which is cleared from customs.
Is there any function module for this requirement.
Please post your suggestions ASAP.
Thanks
Srinivas

hi Srinivas,
It’s not possible to create a new declaration for a declaration that is
already accepted by customs. There could be below 2 possible options
1. U need inbound cancellation messages in the respective activity sequence,
and then u can request customs by mail or phone to send the cancellation
message. Once the cancellation message is received document gets cancelled and
u can create new declaration
2. U need a new optional activity sequence that will have outbound
cancellation message. once u trigger the cancellation message, customs will
reply back with the cancellation confirmation message and u can create a new
declaration
Hope this helps...
Regards,
Santosh

Similar Messages

Is it possible to create a rendition targeted for the web based content viewer?

The way PDFs render in the web broswer is (presently) pretty bad.
Can we create a rendition of a Folio which is specifically (and only) for the purpose of being viewed in the web based content viewer?
Also can we leverage the downloading options in the Folio Producer to yield better results and less lags in rendering? I would like to suggest that Adobe adds some kind of indicator/status-bar which shows remiaing assets still being downloaded. For example, video overlays aren't immediately available.
Despite these quirks, this new capability is huge and we really appreciate it!
-Mark
Mark Kunoff
Informational Systems Specialist
IU Communications
Indiana University Public Affairs and Government Relations
[email protected]

It's too bad the selectable text will go away. This will also hamper the web-based views in terms of accessability, correct? - something very important to our stake holders.
Does Adobe plan to bring these good points of the PDF format back in a future release?
Thanks for your consistently fast replies Bob!
-Mark

Is it possible to create an inbound delivery for STO in a 2 step process ?

Hi Experts,
Is it possible to create an inbound delivery for STO in general (how do I get a vendor for a Plant. I have already assigned a plant to my vendor in vendor master - additional purchasing data, but it does not seem to work).
In particular if I want to create an inbound delivery in intra-company plant STO scenario, how do i do it?
Let me know in case if that is not possible.
Thanks,
Nitin

Hi Tao,
I did that also, but it did not work.
Finally I had to debug, and found that the for the document type UB (intra-company transfer) i should make the customizing setting which makes the vendor data to be considered. (Table T161).
Anyways, thanks for your help.
Regards,
Nitin

Is it possible to create a Production order for consignment fill-up?

Dear all,
As you know, the consignment fill-up is for delivery the own stock to customer special stock.
But our customer request, they want to create a Prodcuction order for the consignment fill-up.
The design flow is like below:
Consignment fill-up -> MRP -> Production order -> GR the FG to local storage location -> Outbound Delivery to customer special stock
So could any one tell me is it possible?
Because I have tried to change the configuration for it, but always failed.
Tks
David

Hello,
Kindly go through following links:
To consider customer consignment stock while MRp with help of user exit/bad
Re: Excluding Kanban storage location from MRP
To consider customer consignment stock while MRp with help of user exit/bad
Can MRP consider customer consignment quantity ?
PP-MRP Exclude Consignment stock in MRP
customer consignment in MRP?
Consignment Fill Up Error
Thanks & Regards
JP

Is it possible to create many primary key for a table?

hello sir/mam.
i am selva, i am new to abap,
is it possible to create many primary key for a table?
please guide me.

Hi Selva,
Many Primary Keys = Composite Key.
i.e some set of columns will enable you to identify a unique row from a set of rows in the table.
This can be achieved by checking the primary key check box in se11.
Hope it helps.
Regards,
Maheswaran.B
Message was edited by: Maheswaran B

Is it possible to create a Clone database with the same name of source db ?

Is it possible to create a Clone database with the same name of source db using RMAN ...
DB version is 11.2.0.2
Is it possible to clone a 11.2.0.2 database to 11.2.0.3 home location directly on a new server . If it starts in a upgrade mode , it is ok ....

user11919409 wrote:
Is it possible to create a Clone database with the same name of source db using RMAN ...
yes
>
DB version is 11.2.0.2
Is it possible to clone a 11.2.0.2 database to 11.2.0.3 home location directly on a new server . If it starts in a upgrade mode , it is ok ....yes
Handle:     user11919409
Status Level:     Newbie (10)
Registered:     Dec 7, 2009
Total Posts:     102
Total Questions:     28 (22 unresolved)
why do you waste time here when you rarely get any answers to your questions?

Is it possible to create a control file without the datafiles

Hi All,
Is it possible to create a control file without the datafiles?
on any OS or DB version
regards,
sachin

if I understand properly:
- you have a script to recreate the controlfile
- you have all of your database files backed up except your controlfiles
This should work as this is how we sometimes refresh dev databases:
1) restore the copies of the database files
2) recreate the controlfile
3) recover the database files to the desired point in time (if hot backup or archivelogs are available, otherwise, it would be as of the time of the backup)
4) add temp files to temporary tablespace(s)
The simpler solution would be to backup your controlfile at the same time as your datafiles (RMAN or o/s copy).
I hope I understood your question properly.

Is it possible to create a tool tip for an individual cell?

Hi,
Is it possible to create a tool tip for an individual cell?
Sun's JTable tutorial shows how to create a tooltip for an individual column:
TableColumnModel tcm = table.getColumnModel();
TableColumn tc = tcm.getColumn(0);
DefaultTableCellRenderer renderer = new DefaultTableCellRenderer();
renderer.setToolTipText("This is a tool tip text");
tc.setCellRenderer(renderer);
Thank you.

See reply #2 below:
http://forum.java.sun.com/thread.jsp?forum=57&thread=424429
;o)
V.V.

Cp 5.5, Section 508 Accessibility - Is it possible to create a skip tag in the Accessibility dialog?

Hi,
We're working with a US Federal client so our Captivates need to fully Section 508 compliant. We've been able to work out strategies for all the elements of our course except one:
In order to auto-play each slide, then have it pause until the user chooses to move forward using the playbar, we've added a click box to each slide. We would like for JAWS to skip reading the click bos, since it is not used as anything other than an automatic pause. If we could use the Accessibility dialog to create a skip tag for the click boxes, that would be ideal.
Here's our experience so far:
If we leave the Accessibility dialog in default (Auto Label checked), JAWS read "click box" - acceptable but not ideal
If we uncheck Auto Label and leave Name and Description empty, JAWS reads "unlabeled button" - unacceptable
If we uncheck Auto Label and populate Name and Description with empty quotation marks, JAWS reads "quote quote" - unacceptable
Appreciate any techniques you've come up with -
Thanks,
KN

System board for use in models with 1 GB of discrete graphics memory 616244-001
System board for use in models with 512 MB of discrete graphics memory 608203-001
System board for use in models with UMA graphics 608204-001
http://h10032.www1.hp.com/ctg/Manual/c02437489.pdf
Graphics is built into the motherboard.
Can only upgrade with new motherboard.
Only a few laptops have graphics cards that can be up graded. "Like Alienware"
Good luck.
HP Expert Tester "Now testing HP Pavilion 15t i3-4030U Win8.1, 6GB RAM and 750GB HDD"
Loaner Program”HP Split 13 x2 13r010dx i3-4012Y Win8.1, 4GB RAM and 500GB Hybrid HDD”
Microsoft Registered Refurbisher
Registered Microsoft Partner
Apple Certified Macintosh Technician Certification in progress.

Is it possible to create a keyboard shortcut for "Export book to PDF"? (Cannot find it in the Keyboard Shortcuts window.)

I'd like to create a keyboard shortcut for the "Export Book to PDF" command on the Books panel menu, but I simply can't find that command in Keyboard Shortcuts. After not finding it in what seemed the logical place (Keyboard Shortcuts > Product Area: Panel Menus > Book), I've looked through all the Product Areas listed on the dropdown menu -- but it seems I must be missing something.
What do I need to do / where do I need to look to assign a keyboard shortcut for this command?

Sorry, I agree that that is missing in action. I don't know of a workaround unless someone has written a script. Scripts can be called with keystrokes.

The workflow could not update the item, possibly because one or more columns for the item require a different type of information using Update Item action

I got error "The workflow could not update the item, possibly because one or more columns for the item require a different type of information "I found out the cause is Update Item action
I need to update item in another List call Customer Report ,the field call "Issues" with data type "Choice" to yes
then the error arise . please help..

Thanks for the quick response Nikhil.
Our SPF 2010 server is relatively small to many setups I am sure. The list with the issue only has 4456 items and there are a few associated lists, eg lookups, Tasks, etc see below for count.
Site Lists
Engagements = 4456 (Errors on this list, primary list for activity)
Tasks = 7711 (All workflow tasks from all site lists)
Clients = 4396 (Lookup from Engagements, Tslips, etc)
Workflow History = 584930 (I periodically run a cleanup on this and try to keep it under 400k)
Tslips = 3522 (Engagements list can create items here, but overall not much interaction between lists)
A few other lists that are used by workflows to lookup associations that are fairly static and under 50 items, eg "Parters Admin" used to lookup a partners executive admin to assign a task.
Stunpals - Disclaimer: This posting is provided "AS IS" with no warranties.

The workflow could not update the item, possibly because one or more columns for the item require a different type of information. Outcome: Unknown Error

Received this error (The workflow could not update the item, possibly because one or more columns for the item require a different type of information.) recently on a workflow that was
working fine and no changes were made to the workflow.
I have tried a few suggestions, i.e. adding a pause before any ‘Update’ action (which didn’t help because the workflow past this action without incident); checked the data type being written
to the fields (the correct data types are being written); and we even checked the list schema to ensure the list names and the internal names are aligned (they
are), but we still cannot figure out why the workflow is still throwing this error.
We located the area within the workflow step where it is failing and we inserted a logging action to determine if the workflow would execute the logging action but it did not, but wrote the same error message.
The workflow is a Reusable Approval workflow designed in SharePoint Designer 2010 and attached to a content type.
The form associated with the list was modified in InfoPath 2010.
Approvers would provide their approval in the InfoPath form which is then read by the workflow.
Side note - items created after the workflow throws this Unknown Error some seem to be working fine.
We have deleted the item in question and re-added it with no effect.
Based on what we were able to determine there don’t seem to be any consistency with how this issue is behaving.
Any suggestions on how to further investigate this issue in order to find the root cause would be greatly appreciated?
Cheers

Hi,
I understand that the reusable workflow doesn’t work properly now. Have you tried to remove the Update list item action to see whether the workflow can run without issue?
If the workflow runs perfectly when the Update list item action is removed, then you need to check whether there are errors in the update action. Check whether the values have been changed.
Thanks,
Entan Ming
Entan Ming
TechNet Community Support

CDESK: How to get a customized content in the document list tab

I try to get a specific list of document info records (DIR's) in the document list tab of the CDESK - similar to the document search result.
I use the Addin-BADI and the ~PROCESS_NEW_FUNCTIONS/~ADD_NEW_FUNCTIONS methods to start a costumer specific selection of DIR's.
For instance I want to select all documents with contain the digits 99.
Then I want to show the selection result as the content of the document list tab to proceed with further steps like ckeck-out and so on.
I followed an example which I found in this forum, see thread "CDESK: Start userdefined search program and recieve DIRs".
My coding is:
method if_ex_cdesk_tbm_addin~process_new_functions.
    when 'ZFCODE_ARBVOR'.
      data lt_draw type table of draw.
      select * from draw into table lt_draw
        where dokar = 'TKD'
          and doknr = '99'.
      sort lt_draw stable by dokar doknr doktl dokvr ascending.
      delete adjacent duplicates from lt_draw comparing dokar doknr doktl dokvr.
      PERFORM refresh_sap_list IN PROGRAM saplcdesk TABLES lt_draw USING 'X'.
But nothing happens with the document list when executing this customer function.
I assume it is not possible to update the document list out of a BADI in that way.
Does anyone has some hints?
Kind regards,
Matthias Fischer

Hi Khaled,
There is an standard RFC RFC_READ_TABLE which can read any table in R/3. But the data returned will be unformatted hence you need to parse it. This FM has few limitations aswell.
RFC_READ_TABLE is an RFC that allows users to read a table remotely. This is important particularly to Java developers using JCO to communicate with an ABAP back-end. Unfortunately, RFC_READ_TABLE has size limitations; it also incorrectly reads binary data. Also no authorization checking takes place.
Also refer the link below
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/ep/portal-content/simplified queries of sap tables from java
hope this helps..
Regards
Anand
Message was edited by: Anand Torgal

How to create multi garnishment order for the same garnishment document

Hi,
Can anyone tell me how to create multi garnishment order for the same garnishment document. I tried to copy the entry in IT0195 but the sequence field is grayed out so it will just delete the old record. What configuration should I do to make this possible?
Thanks a lot in advance.

hi,
As far as I got it.
You cannot have multiple Garnishment order but if a need arises you have to maintain it in IT216.
For that follow this path goto PA30->pernr->194->change->Garnishment->adjustment.
Since like order you cannot maintain adjustment also directly.
Regards,
Amit
Reward all helpful replies.

Create a defaut view for the MS Project Server 2010 client

Dear Forum,
how can I create a defaut view for the MS Project Server 2010 client?
I saved a template and set a default view under File -> Options ->Project View. I also did the same in the checked-out enterprise global. If I then close the client and re-open it my default view changes back again to the previous one (not the view
I set as a default view).
What explains this behaviour and what can I do? Any hints?
Thank you very much for your help!

Scheduler007 --
The view you selected by clicking File > Options > Project View is the default view for every new project you create from a blank project template. This is a global option, so setting it from the checked out Enterprise Global file serves no purpose.
When you select a view as your default view, you will see that view applied to the blank project that is opened when you launch Microsoft Project 2010, and you will see it applied if you create new blank projects. If you create enterprise templates for
people to use in your organization, you should simply apply the view to the template that you want as the default so that users will see this view immediately when they create a new project from the template. In addition, if you apply a view to an open
project, close and check in the project, and then reopen the project, you will see the last view applied in that project (as Guillaume correctly points out).
Beyond this, there is no method possible for the Project Server administrator to specify a default view for the Microsoft Project application used by the project managers in your organization. This is an option each PM must set. Hope this helps.
Dale A. Howard [MVP]

Is it possible to create a customs declaration for the document which is cleraed from customs

Similar Messages

Maybe you are looking for