Is it possible to Display BW Bex report iviews in Tabbed Interface?

Hi,
Is their a way to display BW BEx Report Iviews in Tabbed Interface?
My requirement is to show four BEx Reports using 4 tabs on a page. Can we achieve this functionality in portal? If yes can some one guide me how to proceed?
Regards
Sai Krishna Reddy

why not have a webtemplate with tabbed interace and use that webtemplate to create BWP iview?
check out the following how to document on this subjec.
<a href="https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5074a890-0201-0010-a489-dd05902a28c8">How to Create Buttons and TabStrips in BI Web Applications</a>
Regards
Raja

Similar Messages

KF value is not Displayed in BEx Report ..where as cube, mpro end ok..!!

Hello Experts,
I ran a bex report. In that report KF some NetsSalesValue has not displayed in the BI Report for all the Sales Organiations where as other KFs has displayed the value for all the Sales Organizations.
For that i checked my end. BI report is pulling data from Cube --> Multiprovider --> Bex Report.
I myself checked KF value into Cube level, multiprovider KF level value is avaialable.
And also i checked, in the query properties is there any filters, RKF, CKF, but...i found the KF is a basic KF.
And also..i checked the whether the rollup has happened..properly or not and ran the query but no use.
For your info upto 3 days..back KF value has presented in the report. After that only this issue has encounterred.
I am in confusion where the exact issue will be.
If any body faced this kind of scenario is your project, kindly reply me.
For any more clarifications i will respond you immediately.
Thanks,
SN

Hi,
check aggregates,index etc for cube
check key figure selection as well in Multiprovider for respective Infoprovider
just create test query on Infoprovider and then on Multiprovider and see..
Check RSRT - regenerate the query
also see there are various options like execute+debug has ....just check them
Thanks and regards
Kiran

Capture the exceptions from BW Bex Report in a class/interface

Hi....
I am trying to capture the exceptions defined in the BW BEx Reports in a class (superclass - CL_RSR_WWW_MODIFY_TABLE) in a variable or something.
This is actually to change the properties of a table in Web Applcn. acc to the exceptions by altering the cell content in the class(Transaction - SE80).
Is it possible to store the exceptions in a variable in the class???

Hi Smriti,
Exception and Exception Handling can be based on classes in ABAP Objects. In an exception situation, an exception is represented by an exception object
i.e. an instance of an exception class. Its attributes contain information about the
error situation. Exception classes can be defined both locally and globally. When a class based exception is raised, the system interrupts normal   program flow and tries to navigate to the suitable handler.
An exception can only be handled if the causing statement(s) is enclosed in a TRY-ENDTRY block. If a exception occurs in a TRY block, the system first searches for a CATCH statement (which will handle the exception) in the same block and then step by step upwards in all enclosing TRY-ENDTRY blocks. If it finds one, it navigates to this handler, else if TRY-ENDTRY block is in a procedure, it then tries to propagate the exception to the calling program. After exception occurs, system searches through the listed exception handlers in specified order and executes first handler whose CATCH statement contains the relevant exception class or one of its superclasses.
PARAMETERS: p_num1 TYPE i,
            p_num2 TYPE i.
DATA: gv_result TYPE i,
      gv_text   TYPE string,
Defining reference variables with reference to the common superclass *
CX_ROOT of all exception classes.                                     *
      z_ref_exc TYPE REF TO cx_root.
TRY.
    gv_result = p_num1 / p_num2.
    WRITE / gv_result.
For division by zero, the runtime system raises the exception         *
cx_sy_zerodivide. This is handled in the CATCH block. The reference   *
to the appropriate instance is stored in the data object z_ref_exc.   *
CATCH cx_sy_zerodivide INTO z_ref_exc.
Handler can access the instance's exception text using the functional *
method GET_TEXT.                                                      *
    gv_text = z_ref_exc->get_text( ).
    MESSAGE gv_text TYPE 'I'.
ENDTRY.
Award points if found useful.
Regards
Indrajit

Data for a node in Hierarchy not displayed in BEx report.

I have a time dependent hierarchy on 0ORGUNIT. There is a report which displays employee wise, ORGUNIT wise data. This report is based on a Infocube which also has 0ORGUNIT updated in it as a charecteristic.
When i view the contents of the cube for a particular orgunit (5000397), employee (5980) for a particular time range (01.01.2011 - 16.01.2011), it gives me some data. However when i execute a report in BEx (7.0) with the same restrictions; it shows 'No applicable data found'.
In the query designer I have corectly assigned the hierarchy properties to 0ORGUNIT with the hierarchy name, version and date (last date of the user entered time range). Also the hierarchy has been uploaded with the latest data i.e. for orgunit 50000397 there is an entry for the period: 01.09.2009 - 31.12.9999.
Can you please suggest.

Can you check and make sure..that there are no other Global filters in the Query Design..
Regards,
Vikram

Open orders display in BEX report based on Key date

Hello All,
I have a requirement:
We have an existing report which needs to have input selection as Key Date.
The report should display the Open orders based on the key date mentioned.
For Eg: if an item A was Opened on 20th Sept, 2010 and now CLEARED and if I run the ECC report today and mention the key date as 20th Sept, 2010, then the report will show me the item A status as OPEN
Plz help me with the logic for the same at the earliest
Tthanks..
Sneha

Hi Sneha,
I assume you have open and crear dates in your query. So put an open date in your query filter and restrict it as less then Key date variable(which is a variable of type user-input on 0calday), then create another variable that feeds from keydate variable (it can be a replacement path or simplest user-exit).
Note: the another variable is needed because as far as i can remember you cant use the same variable to restrict two different chars in the same query/anyway test if it's not possible - then create another variable as i mentioned.
Take Cleardate in your query filter and restrict it as more than keydate variable andr # (not assigned). (in case if it hasnt been creared at all yet at the key date time)
Pls let me know if this was helpfull

Re : Issue with the column display in Bex reports

Hello Gurus,
I have an issue with the reports in Bex, this is a bit confusing scenario I would try to explain in more details. A query was already built for monthly Report in Sales and Billing for which the variable were Calender month/year range 1 (mandatory), range 2 range 3 range 4. These 4 variable were created and moved to column rows in query.
Later the user wanted the copy of same report but he wanted the variables to be Calender date range 1 (mandatory), range 2, range 3 , range 4. I have created them with 0calenderday as reference and moved to the columns.
for the monthly report text variables were already existing for the Calender month/ year, but for the daily report text variable were not existing for Dates. I have created a text variable for the date in the following way processing by
" replacement path" and reference characteristic as 0calday and in the replacement path tab.. in replace variable the selection is info object, the next option Replace with " External charactersitic value key " .
By creating this text variable the dates were being displayed in the colum header like 11/01/2013 - 11/30/2013 which satisfies the requirement.
But the user wanted to see the report same like monthly report when the mandatory variable Calender year/ month is selected, the rest of the columns range 2, range 3, range 4 are displayed as unassigned in the report. but coming back to the daily report when the user is giving the Calender date rage 1, he is finding that Calender date range 2, range 3, range 4 are also being displayed with values. He want to see the Calender date range 2,3,4 as unassigned in the report just like monthly. Please find the images attached.
As Calender month/ year is predefined, if the calender range values are not given it would show up as not assigned default. I have created a separate text variable for Calender day, I believe that could be the reason rest of the columns are not showing up as unassigned. The user want to see them as unassigned like monthly report columns.
I tried different ways changing the text variables but I could not change the display of the columns in Calender date report by the option - replace with ----> External characteristic value key, key, label. when I chose the option external characteristic value then the date was showing up in the text of the column when report is run ( Please find the image for the reference in the attachment ). . I request you to help me out in this. Please find the images of the variables and output below.

Anshu,
Thank you very much for above code I made minor changes to the code that finally worked. I created 4 different text variables needed for Calender date range 1, 2 ,3 ,4. Please find the code below for the text variable that worked in the system
WHEN 'ZTEXT_CAL1'.
   READ TABLE I_T_VAR_RANGE INTO loc_var_range
   WITH KEY VNAM = 'ZCALDATE1'.
    IF loc_var_range-LOW = '#'.
      dt_low = 'Not Assigned'.
      dt_high = 'Not Assigned'.
      CONCATENATE dt_low '-' dt_high INTO l_s_range-low.
    ELSE.
      CONCATENATE loc_var_range-low+4(2) '/' loc_var_range-low+6(2) '/' loc_var_range-low+0(4) into dt_low.
      CONCATENATE loc_var_range-high+4(2) '/' loc_var_range-high+6(2) '/' loc_var_range-high+0(4) into dt_high.
      CONCATENATE dt_low '-' dt_high INTO l_s_range-low.
    ENDIF.
        L_S_RANGE-SIGN = 'I'.
        L_S_RANGE-OPT = 'EQ'.
        APPEND L_S_RANGE TO E_T_RANGE.

Currency Display in BEx Report

Hi,
When I am executing a BEx Query with Regional Language options on the OS as English ( United Kingdom ), I am seeing the values in Number format ex : 98766EUR but when I change the Regional Language Options on the OS as German ( Deutshland ) I am seeing the values in text format ex : 98765.60.
Anything to be changed in Excel to solve the problem???
Thanks,
Vamsi

Hi Sukthi,
But when I refresh the workbook or execute the query, it should come by default automatically. With the option mentioned below you are changing the cells manually which doesnt solved the problem.
Thanks,
Vamsi

Bex reports in non english language

What setting required to get the Bex reports in Japanese language. Provide more inputs..

Hi,
Regarding to the Japanese Displaying issue, it depends on what Bex version are you using to display the BEx report and please refer to thefollowing information:
1. If you are using BEx3.5 tool    It is necessary to set all the regioan and language settings in
   control panel of the issued machine to "Japan" and "Japanese",
   inculding the "format" "unicode" "keyborad and     languages"       and
   "location" tabs. For more details, please refer to the attached
   "region and language settings.jpg" file.
   After set the language to Japanese, you need to restart your
   PC and then you can verify if the Japanese Characters can be
   displayed correctly in BEx3.5 report.
   Note:Users are supposed to understand Japanese if they need to
   display and read Japanese reports, so all the settings are required
   to set to Japanese, if users need to have PC with English menu
   displayed but with report in Japanese, they can leave "display
   language part" as "English" so the OS system menus will still be in
   English.
2. If you are using BEx7.0 tool
   Basically you don't have to set anything specially on the client
   machine as Bex7.0 is a multiple language supported version, meaning
   with all Engish settings on local machine, once you logon Bex in
   JA, Japanese Characters can also be displayed correctly in the
   Bex reports. Just make sure that the relevatn reports data have
   JA maintained in BW backend system and JA language is installed
   correctly.
Thanks,
Venkat

I Need to change Date Format in BEx report

Hi Experts,
i Need display with required values with following symbols in BEx report # and Date format change as per client requirement. Without any VB Code.
Let me know solution for this.
By
ANR

My actual requirement,
by default date format display in BEx Reports MM/DD/YYYY fomat, but i want change DD/MM/YYYY format without using any VB macro and also instead of displaying "#" i need display "0" (Zero).
let me know the solution.
by
ANR
Anybody ....
Message was edited by: ANR

Not assigned value in Bex report

Hello experts,
One of the value in the BEx report is appearing as not assigned. What could be the reason?
Thanks
SP

Hi all,
In the back end system 0sales_office is attribute of 0customer,
Then I have activated the 0customer master data and done attribute change, I have such display at BEx reporting
customer        sales office(key)       sales office(text)                      Sales
9876554               0010                         Michigan                         USD   4567
                                #                            Not Assigned                  USD   2563
although I expect to see
customer        sales office(key)       sales office(text)                      Sales
9876554               0010                         Michigan                         USD   7130
Is there anything I do miss?

Symbols on Bex Report

Hi All,
Can anyone help me to explain meaning for the following symbols that displayed in Bex report results
1. 1234.00MYR
2. X
3. *
Thank you

X and   * are the signs displayed as per the settings that are defined in SPRO
SPRO -> SAP Reference IMG -> SAP Netweaver -> Business Intelligence -> Settings for reporting and Analysis -> General Settings for Reporting & Analysis -> Presenting Numeric values in teh Explorer.
There you will see four option for BEx values to display if the result is :
Divison by Zero      X
Does Not exist      X
Num.overflow        X
Mixed values        *
No Authorisation    Blank
You can check your settings
hope it helps
Sriman
Edited by: Sreeman on Apr 16, 2008 1:39 PM

Bex Report / Multi Providers

Hello to all experts and BW users,
I have question regarding advanced Bex reports. Is it possible to have one Bex report (Excel Workbook, with different sheets) using more than one multi providers or info cubes?
The reason for this question is simply that I would like to combine several KPI reports in one Summary KPI report for our MB. (Without creating a Master multi provider on top of the current multi providers)
Many thanks in advance friends!
Boyke

Hi Boyke,
Open a query in BEx and then click anywhere in the blank area of the Excel sheet(same or different) where you would like to add the other KPI report. Then select the Menu option as described below.
You can use the "Insert Query" option in the Tools button available in BEx to combine two or more queries in a single workbook.
When you select this option it will give you a list of all existing queries in the BW system select the one you wish to add.
Hope this helps.
Cheers
Anurag

BEx report is showing wrong total but individual cell's total gives correct figure

Hi,
     For a bex report at sales office level, there are about 110 sales offices giving sales figures. But for some 2 sales offices, it's not giving the correct figure(for Total Volume). When I bring the Bex report at sales office level and customer level, I could get individual sales figures for some customers present in that sales office. But if I take the total of all customer's total volume, I'm getting exact figures (i.e., the correct figure for total volume)but it's total displayed by BEx report is wrong.
for eg:
Sales Office     Total Volume
101                    100
102                    150
103                    300
Let us take the above example. Here, Sales office 101, 102 are correct wit its total volume. For sales office 103, for validation if I bring customer as:
Sales office     Customer     Total Volume
103                    111               20
                         112               80
                         113             101
                         114               22
                         115               82
The total of above Total volume is 305 but it's displayed as 300.
Only for some one or two sales offices. It's cube is giving the correct data if I take up it's sum.
Plz help me to resolve the problem.
with Regards,
Antony Jerald.

Hi Sujit,
     Thanks for your reply. As you said, if it's because of exception aggregation, the same(wrong total)will be displayed for all the sales offices right?
Could you please let me know what are all the important tabs you want me to show?
Awaiting for your reply..
with thanks and regards,
Antony Jerald.

Emailing Bex Reports

Hi Experts,
I have a Bex Query and I'm able to run it on Analyzer. Now i would like to email it as a report.
I tried on help.sap but all I understood was only in Web Application we can send mails.
Please tell me whether it is possible to email the Bex Report. If yes please explain me
Thanks

Hi,
Please check below link.
/people/sap.user72/blog/2005/12/23/summary-of-new-features-for-information-broadcasting-in-sap-netweaver-2004s
http://help.sap.com/saphelp_nw04/helpdata/en/ce/faec40d3328531e10000000a1550b0/content.htm
Also you can use reporting agaent for this.
Regards,
Amol

How to display a html report on jsp page---urgent

i want to display a html report wen a tab is clicked.can any tell me how to do tat.

Didn't quite get your requirement. What do you mean by an HTML report?

Is it possible to Display BW Bex report iviews in Tabbed Interface?

Similar Messages

Maybe you are looking for