Is it possible to display the standard function keys in screen painter

Hi ,
I design a screen in se51 where I use push buttons and input/output buttons and so on in the layout, here in the layout or in my final output screen(when i assign this screen to a transaction) I would like to display other standard keys, ie the function keys and application toolbar items. I would like to know whether there is a possibility to do this , if yes then how?
In a menu painter there is a possibility where I can customize the keys or I can use the standard keys by going to se41 extras->adjust template. Is there similar possibilities in the screen painter.

Ok I see. I should use &var.
Edited by: xerosaburu on Aug 18, 2009 11:37 AM

Similar Messages

Is it Possible to display the output of the ALV list as POP-UP

Hi Experts,
                 Is it Possible to display the output of the ALV list as POP-UP, if yes then provide some ideas on it.
thanking in advance,
Samad.

Hi samad, it is possible to display alv list as pop-up by using the FM " REUSE_ALV_POPUP_TO_SELECT"
try this sample code
CALL FUNCTION 'REUSE_ALV_POPUP_TO_SELECT'
      EXPORTING
   I_TITLE                       = P1_TITLE
       I_SELECTION                   = 'X'
       I_ZEBRA                       = 'X'
I_CHECKBOX_FIELDNAME          =
I_LINEMARK_FIELDNAME          =
I_SCROLL_TO_SEL_LINE          = 'X'
        I_TABNAME                     = 'T_VBAP'
       I_STRUCTURE_NAME              = 'T_VBAP'
       IT_FIELDCAT                   = T_FCAT2
       I_CALLBACK_PROGRAM            = 'ZTEST_ALV_POPUP'
   IMPORTING
       ES_SELFIELD                   = I_SELFIELD
       E_EXIT                        = W_EXIT
      TABLES
        T_OUTTAB                      = T_VBAP.
i think it will solve your problem
Regards,
Vijay

Projects, is the Standard Functionality the one with COGS created?

Korean Air manufactures AIRCRAFT components and delivers them to customers such as Boeing. It wants to implement ERP (R12) applying Oracle Projects Solution.
Issue
1. When Shipping Type Deliverable is created in Project Module and it is interface to Shipping Execution for Ship Confirm, COGS(Cost of Goods Sold ) for Shipping Item is created and it overlaps with cost of sales per Project/Task.
Question
*1. **When Shipping was done using deliverable of Shipping Type in Project Module, is the Standard Functionality the one with COGS created?*
A. If the number 1 case is Standard Functionality, is there any option to prevent COGS creation?
B. If the answer is no, by what kind of setup is it possible?
C. Does Shipping of Project Module based on “non-asset based warehouse”?
*2. What is the Integration mapping of Project Management, Shipping Execution, Inventory, AR, COGS etc?*
The following are basic process.
1. Quotation-> Contract -> Plan -> Production -> Delivery -> Revenue
A. Using Deliverable in Projects
2. Project: Agreement
3. Task: Unit
4. Purchasing Plan, Production Plan etc. executed based on Project/Task
5. Cost calculation is calculated in Project/Task unit
6. When Task (Tail Number) is completed, deliver to Boeing according to contract
B. Interface through Shipping Execution
C. Ship Confirm
7. Based on cost revenue is recognized according to progression rate.
A. Cost Collect
B. Generate Draft Revenue
8. Based on delivery or contract, account receivable is created and send to customer.
A. Create Event per Task
B. Generate Draft Revenue
C. Interface Draft Revenue to Receivables.

Hello Daniel,
The PCI serial cards are not supported with LabVIEW RT for ETS targets and are not expected to work. We are looking into finding a way to add support for PCI serial devices in RT, but currently that support does not exist.
One possible workaround would be to use a NI ENET-485-X device. The visa resource name will not be COMx in this case. Instead, you will need to enter the long name of ASRL::::::INSTR as documented in the NI-VISA help.
I hope this helps. If you need to speak with your sales representative to resolve this issue, please follow this link. Have a great day.
Regards,
Kristi H
National InstrumentsMessage Edited by Support on 01-18-2005 08:24 AM

What are the standard functions in XI ?

What are the standard functions in XI ?

Hi,
The target field mapping is possible by using below typs of functions
1. Standard functions
2. Runtime procedure
3. User Defined functions
Standard functions are the APIs provided in Graphical mapping to process the values of the fields used for target field mapping.
Technically all these values are trated as string thus all standard functions expect strings as input argument and string as an export aurgument
Please find here with you more details about it at below link
http://help.sap.com/saphelp_nw04/helpdata/en/43/c4cdfc334824478090739c04c4a249/frameset.htm
2. Runtime procedure
http://help.sap.com/saphelp_nw04/helpdata/en/3d/24e15bf9d79243b45d49b13b03de8f/content.htm
3. User Defined functions
http://help.sap.com/saphelp_nw04/helpdata/en/22/e127f28b572243b4324879c6bf05a0/content.htm
Thanks
Swarup

Is it possible to display the static numerals as Hindi?

Trying to generate a report using XML Publisher, the report composed of two columns.
Need to display the numerals in English language coulmn in Arabic numerals and the numerals in Arabic language column in Hindi numerals. Currently they both appear as Arabic numerals in both columns
Question:
Is it possible to display the static numerals as Hindi as they had been
entred in the template or not?
I understood that on generation these should be variables not static.
I would welcome any input on this issue.
Many thanks

Hmm,
In templates i guess, you can use multiple font text ..
same is the case here..
Arabic and hindi, are you using different font for these ?
if so, are these fonts available in server too ?
The test displayed can be static or dynamic, but if the server doesn't know which font to be applied, then its going to apply default font for the text.
At runtime, the server has to known, for this text which font has to be applied. if this has to happen, font has to be understood by server.

Is that possible to display the user selection data in the printable page?

Hi All,
I'm going to add a printablepage button on my page.
Here comes a questions.
Is that possible to display the user selection data in the printable page?
For example,
I have a table in the page,with 10 records.User select 5 of them.Can I display these 5 records in the printable page?
Please help.

Hi Yannick,
Thanks a lot for the information. It worked.
The portlet data can be accessible using bindings, but parameter name can be different.
Meanwhile I have got one more scenario, where the Portlet and Task Flow placed in different pages of WCP Application. On change of data in the Portlet the application should navigate to another page where the Task Flow placed and displays selected data.
Basically I can not use any button for navigation. The navigation should happen once I do some action in Portlet.
Is this possible? If yes can you please let me know the steps?
Thanks in advance!
Somnath
Edited by: Somnath Basak on Dec 20, 2011 9:41 AM

Is it possible to display the entire list in Background ?

Hi all,
I have alv report(Oops) , it is grid display and having more than 300 columns , when i execute that report in background i am getting only 132 columns and 65 lines per page, Is it possible to display the entire list , If it is possible then how we can do that? if it is not what is the reason? .
Thanks in Advance.

Hi,
If use Grid in BG u will get o/p In ALV List Itself, second thing is u will get Croped o/p bcos of Print Format 65255 , in this case u have to create/change a new Print Format only for BG jobs like 651000.
for more info ask ur basis person to create a new print formats in such cases.
Regards,
shiva.

Is it possible to display the document link for each record in Report ?

Hi,
     Is it possible to display the document or Image link for each master record in the Report with the help of RSA1->Document->Master Data.
Usefull answers are really helpfull.
Advance Thanks for the userful answers.
Regards,
MRC.

Hi JAYASHREE PARASMAL ,
      Thanks for your valuable answers.
      Now i got the document in my Report,while executing the report through query designer as per your suggestion done on Setting Tab option.
      But i can't able to get the same thing,while i executing the Repory through WAD.
      What setting i need follow in the WAD for getting the same thing.
      Kindly give your suggestion to get the document in my Report,while i am executing through my WAD.
      Once again thanks for your helpful answer and awaiting for your suggestion.
Regards,
MRC.

Is it necessary to use the standard function modules always?

Hi All,
Suppose i can retrieve the BUSINEES PARTNER ID from the table BUT000 with the help of 'BP_GUID' field through a select query statement.
Now is it necessary to use a standard function module to retrieve the same data. what about the performance? which is the better solution. to implement our own code or to use the function module available.
Please someone clarify me about this issue.
Regards,
Sharry.

If you'd ask the question in general it's obvious that there is no good answer as it always would depend on the circumstance. However, as you've posted your question in the performance tuning forum, let's look at your question in this context first. I think it's fairly safe to say, that in almost 100% of the cases a standard function module will not be as fast as any well implemented and custom tailored code. If in doubt, just try reading the code of the function module you want to read; most likely you will find lots of unnecessary fluff in there, often they read data that you don't even need.
And as far as buffering is concerned, that can also be an issue. E.g. let's say you do a massive read of distinct business partners and you only need the data once for each partner. Obviously buffering is silly in this case and it might even slow down your program, because the implemented buffering is not necessarily well implemented. I've come across a few cases, where the buffer tables where standard tables with no efficient read access (so no sorted table or hash table) and once tons of data were buffered, it actually took a moment to look up if the record already was buffered (just to find it wasn't there yet).
Now most of the times this slowdown is not an issue as the lookup is still fast compared to the (usually) prevalent database accesses with their slower IO timing. But another factor to consider is memory consumption and why buffer data in memory (and waste it), if you can't use the buffer anyway? So when I do use standard function modules, I usually try to see what they retain in global memory, to better understand if I need to call some initialization/clearing/refresh function...
Note also that often you need to process lots of data, but don't find a standard function module for "mass access", so you need to read your object one by one. Obviously that's another good candidate for implementing your own queries, where you can process the data in packages.
So what might be the reason to use a standard function module? Well, often it's required because the logic is so complex that it would take you too much time to implement it (not to mention that we often simply don't know all the logic that's coded in there). Another advantage is that you might get independent of the data model. E.g. for IDoc interfaces SAP switched in some release the tables where the data is stored. So if you had coded your own queries to get IDoc data, they wouldn't have worked after this particular release upgrade. The standard function on the other hand, checks both the old and new tables, so by using it you would have been fine.
The one major caveat I'd give though is to always check whether the function module is released or at least documented to some degree. I.e. if it's not released, SAP won't support it and does not guarantee that the interface or logic stays the same. In my experience lots of functions I do want to use are not released (or documented), but I will still use them because they seem to be the best alternative in certain scenarios.
Cheers, harald

Need to know the standard function module/program in E recruitment

Hi All,
I need to know the standard function module/programm that defaults the 'Functional area' field in the posting page from the requisition page.
Early responce is greatly appreciated.
Thanks and best regards
Rajeev

Hi Masa,
Thanks for your reply.
We are using Assets with the integration of Project systems. We are now in 4.6C R/3 & SRM 5.0 system. And now R/3 upgrade and SRM upgrade going on smultaniously to ECC6.0 and SRM 7.0 respectively.
I would like to know any new functionality available in the latest upgrades and we have done lot of customization for Asset Procurement. And would like to go with Vanilla.
Can you please provide me some inputs about the Project (WBS element ) based Asset Procurement in SRM as standard.
Thanks and Regards,
Ramesh

Need to know the standard function module in E-Recruitment

Hi All,
I need to know the standard function module that defaults the value of 'Functional area' in 'Posting' from 'Requisition'.
Early response is greatly appreciated.
Thanks an best regards
Rajeev

Hi Masa,
Thanks for your reply.
We are using Assets with the integration of Project systems. We are now in 4.6C R/3 & SRM 5.0 system. And now R/3 upgrade and SRM upgrade going on smultaniously to ECC6.0 and SRM 7.0 respectively.
I would like to know any new functionality available in the latest upgrades and we have done lot of customization for Asset Procurement. And would like to go with Vanilla.
Can you please provide me some inputs about the Project (WBS element ) based Asset Procurement in SRM as standard.
Thanks and Regards,
Ramesh

How to get the java code of the standard functions

How to get the java code of the standard functions in xi
Example , hoh get the java code for a node function - removeContext.

hi
Click on the Standard Function.
Hold Ctrl+Shift
right click on the standard function to view the context menu. You will see options to view the source code by exporting
regards
krishna

Third Party keyboard- possible to "Use all F1, F2, etc. keys as standard function keys"?

I've got a 3rd party Anker slim mac keyboard (http://www.amazon.com/Anker%C2%AE-Bluetooth-Wireless-Keyboard-Tablets/dp/B005ONM DYE).
I really need to be able to use the F7 and F8 keys for my audio program (Pro Tools 10), but they always do the consumer-keys actions (rewind/play in itunes). Everywhere I look says to go to System Preferences and select the "Use all F1, F2, etc. keys as standard function keys" button, but since I have a third-party keyboard, that option does not exist. Using an applescript to try and do it anyway doen't work either. The closest I've gotten is using the freeware FunctionFlip, but that requires me to press and hold the Fn key to use them as function keys. I don't want that.
Is there ANY way, official or third party, free or paid, that I can get this to work without buying a new keyboard?
Thanks!
Computer is a late 2012 Mac Mini with Mountain Lion

Hello,
I think Spark cured this for another person and the same problem...
http://www.shadowlab.org/Software/spark.php

Change the standard function module

The standard function module FI_DUPLICATE_INVOICE_CHECK will check whether an invoice/credit memo has already been posted where all of the following attributes match: Company code, vendor, currency, document date, reference number (If a reference number was entered in the current invoice/credit memo). If no reference number was entered in the current invoice/credit memo the system checks whether an invoice/credit memo has already been posted where all of the following attributes match: Company code, vendor, currency, document date, amount in document currency
my requirement is
The above functionality described in the short description doesnt provide for the need within AP to check on duplicate invoices. The functionality in FI differs from the functionaltiy provided in LIV and therefor needs to be aligned. The risk of posting duplicate invoice entry is eminent since the check is dependent on all parameters. For a good duplicate invoice number check we need FI to check on Vendor and invoice reference within the same fiscal year. To modify rules, copy FI_DUPLICATE_INVOICE_CHECK, modify the checks and then call the copied function module from FB60. The remaining field check in the standard function module should be deleted.
how to achive this. i didn't understand the requirement .Please give me any suggestion for this.

Hi ,
I think what you are saying is the functionality given in Logistics Invoice verification is not suitable for FI Invoice.
If I am correct , then there is a configuration setting in SPRO where you set check for duplicate invoice. It has just three checkboxes
a) Company code b) Reference number c) Invoice date
so I think this configuration setting will suffice your requirement.
Please let me know.
Amit

Where the documentation is provided for the Standard Function module ?

If there is no documentation provided for the standard function module in SE37 what is the best way to understand the functionality of the function module?Is there any where we can find the documentation?
Please dont say the From coding part its too vast to understand
Ex: HRCM_ORGSTRC_INFO_TABLE_GET
Paint for me ..
Regards
sas
Edited by: Julius Bussche on Mar 18, 2009 1:17 PM

O Really thanks amit !!
Are you able to understand the below code and please provide your valuable inputs what we are understanding is the same.
PERFORM read_infotypes.
*-- ********************************************************** NMP
*-- IF scb frozen then write to itab-scb field. nmp 11/2001.
*-- ********************************************************** NMP
*--Begin of Change by vneld - 01/17/2007
* IF PA0001-ZZBERN NE SPACE.
*    FROZEN = PA0001-ZZBERN.
* ENDIF.
* ITAB-SCB = FROZEN.
*-- ********************************************************** NMP
*--end of Change by vneld- 01/17/2007
PERFORM get_date USING '92'
                   CHANGING w_hiredate.
PERFORM get_date USING '93'
                   CHANGING w_rehire.
PERFORM get_date USING '94'
                   CHANGING w_termdate.
IF NOT ( w_rehire IS INITIAL ).
    w_hiredate = w_rehire.
    itab-code = 'R'.
ELSE.
    itab-code = 'H'.
ENDIF.
IF p0001-persg = '3'.
    itab-code = 'T'.
ENDIF.
*Change by Mdukes
** We need HIRE,Rehire & term within 13 month`s window
** But if someone Hire in IT ,change dept and then terminated .
** We need to exclude that person from the list .
** We need to change his Org.Unit by END_DATE 12/31/9999 from Pa0001.
CLEAR:result_tab.REFRESH:result_tab.
CALL FUNCTION 'HRCM_ORGSTRC_INFO_TABLE_GET'
    EXPORTING
      PLVAR          = '01'
      ROOT_OTYPE     = 'O'
      ROOT_OBJID     = P0001-ORGEH
      BEGDA          = SY-DATUM
      ENDDA          = P0001-ENDDA
      PATH_ID        = EVPATH
      PATH_DEPTH     = 10
    TABLES
      ORG_INFO_TABLE = result_tab
    EXCEPTIONS
      PATH_ERROR     = 1
      ROOT_ERROR     = 2
      OTHERS         = 3.
* CALL FUNCTION 'RH_STRUC_GET'
*    EXPORTING = 'O'
*      act_objid       = PA0001-ORGEH
*      act_wegid       = EVPATH
*      act_plvar       = TYPE
*      act_tflag       = space
*      act_vflag       = space
*      authority_check = space
*    TABLES
*      result_tab      = result_tab
*    EXCEPTIONS
*      no_plvar_found = 1
*      no_entry_found = 2
*      OTHERS          = 3.
* reading the Org.Unit based on employee Org.unit (Evaluation Path 'O-O'.
* After that making sure the latest Pa0001 org.unit is part of selection org.unit
* If yes, set the flag to = 1 . Otherwise ignore the rec .
* We want only IT folks hire/rehire/term within 13 monthu2019s window
* if somebody change the dept and get term within 13 monthu2019s .it
* Should show up in hire but not in term report .
CLEAR:REC.
lOOP AT result_tab.
    read table PCHOBJID with key low = result_tab-OBJID.
    if sy-subrc = 0 .
      Rec = 1.
      EXIT.
    Endif.
ENDLOOP.
if rec = 1.
*--begin of change by vneld- 01/17/07
    CHECK ( ( w_hiredate >= w_13th_mnth_date AND w_hiredate <= sy-datum )
      OR
          ( w_termdate >= w_13th_mnth_date AND w_termdate <= sy-datum ) ).
*--end of change by vneld- 01/17/07
**---check for hires or terms in the calendar year.
**---No future terms
* CHECK ( ( W_HIREDATE(4) = SY-DATUM(4) ) OR
* ( W_TERMDATE(4) = SY-DATUM(4) AND W_TERMDATE <= SY-DATUM ) ).
    CONCATENATE p0002-vorna p0002-nachn INTO itab-name SEPARATED BY ' '.
*--Begin of change by vneld 03/29/2007
*--get supervisor name
    data : lname(20),
           fname(20).
    clear: lname,
           fname.
    Select vorna nachn from pa0002 into (fname ,lname)
           where pernr = p0001-zzsuper_no.
    endselect.
    CONCATENATE lname fname INTO itab-supv SEPARATED BY ' '.
* itab-supv = p0001-zzsuper_text.
*--End of change by vneld 03/29/2007
*----get employee group text
    CLEAR t501t.
    SELECT SINGLE * FROM t501t WHERE sprsl = 'EN' AND
                                     persg = p0001-persg.
    IF sy-subrc EQ 0.
      itab-group = t501t-ptext.
    ENDIF.
    PERFORM get_dept.
    PERFORM get_position.
    PERFORM append_fields.
endif.
ENDFORM.                    " PROCESS_EMPLOYEE
Edited by: saslove sap on Mar 19, 2009 7:45 AM

Is it possible to display the standard function keys in screen painter

Similar Messages

Maybe you are looking for