Is it possible to have an image field?

Is there a way to create an "image" field within a form, essentially enabling the user to enter images the same way they would text?

Read this:
http://answers.acrobatusers.com/insert-image-form-field-Is-Acrobat-ProX-q2906.aspx

Similar Messages

  • Is is possible to have the images as thumbnails and make it so you can click on them for a larger view and then click them again to have it go back to the original size? In an interactive pdf?

    I am designing an interactive catalog in a pdf. Is it possible to have the images as a thumbnail and then click them to enlarge the image and then click again to make them go back to the original size?
    Thank you in advance!
    Stephanie

    It can be done with Show/Hide buttons:
    Here's a button created from a small version of the image (notice that it's selected in the image below):
    The small button has a Show/Hide Buttons and Forms action. It's action is to make the Larger Image visible (eyeball turned on) with the small image hidden (eyeball turned off).
    The large image is also turned into a button (shown below):
    Notice the checkbox "Hidden Until Triggered". The large button is hidden until it's triggered by the small button. Clicking on the large image also causes a Show/Hide action which shows the Small button and hides the large button.

  • Is it possible to have user defined field in pick and pack manager

    HI,
    I would like to know whether it is possible to have user defined field in pick and pack manager row level.
    Manage user defined field there is only provision for <b>pick list</b> and not for <b>Pick and pack</b>.
    Regards
    Krishna

    The Pick and Pack Manger doesn't relate to any specific table (nothing saved to the database), so it does not make any sense having a userdefiend field on it. I would guess that you could add a column and bind it to a userdatasource (not a SAP database field), but if this make any sense depends on what you are trying to achive...

  • Is it possible to have editable text field in interactive report?

    Is it possible to have editable text field in interactive report?
    Thanks,
    Dip

    Hi,
    I followed your suggestion and defined an IR with apex_item.text columns and it works fine. Now however I face a new problem when I run the page and use the standard Search Bar:
    - Click on Actions/Filter
    - Select a column, for example the employee name.
    - Open the Expression field LOV: I correctly see the different names.
    - When I select one of the names, in the Expression field, instead of the name, I see:
    "<input type="text" name="f03" size="20" maxlength="2000" value="Eugene" />"
    Horrible!!!!!!
    Is there a way to see the name and not that expression? The same thing get downloaded, so it´s really annoying.
    Thank you very much in advance for your help!!!
    Regards
    Francesco

  • Possible to have new image with each new dowload?

    How can I have one image on a page get replaced with a
    different, but exactly the same sized, image each time someone
    downloads the page? I want it to cycle through about 6 images, or
    in random order, either way. Any online tutorials how to do
    this?

    brainfillet wrote:
    > How can I have one image on a page get replaced with a
    different, but exactly
    > the same sized, image each time someone downloads the
    page? I want it to cycle
    > through about 6 images, or in random order, either way.
    Any online tutorials
    > how to do this?
    There are millions of them. Google "random image script".
    David Powers, Adobe Community Expert
    Author, "The Essential Guide to Dreamweaver CS3" (friends of
    ED)
    Author, "PHP Solutions" (friends of ED)
    http://foundationphp.com/

  • Is it possible to have a text field have both auto font resizing and rich text format?

    I am trying to make a field so I can bold or italicize within, but still have the capability to add as much text as I want with the font size getting small so that it all fits in the field.  It seems I can have the auto resize OR the Rich Text, but not both.   Is there a way around this?
    Thank you.

    You can't? Just to give you some context, I work as a graphic designer, I'm creating for the first time an iBook for a client and I have quite a few examples already.
    A couple of vague examples:
    - Imagine a diagonal animation from the bottom left corner to the top right corner of the page. I could do this with keynote or html, for example. Now imagine you want some text floating at the top left and bottom right corner.
    I wont get into details, but the fact the animation is "cutting" through the text is very much relevant to the context.
    - A page with a bold white title, a strong photographic lowkey background and some kind of interaction of top of it.
    - A page with a keynote widget occupying almost the entire area, and a title in text format (that would superpose with they keynote but not with its graphics)
    - etc etc
    These are all impossible scenarios.
    The actual interaction with text/images and interactive elements is nonexistent.
    But I understand now that the interactive bits of the book must be separated from the other content - its context -which is a shame. And I understand it's not a bug, from what you say. The iBA interface shows the book like a PFD export, in a way, as well as the thumbnails at the Table of Contents, were all the text is visible. The actual pages have a different behaviour.
    Thank you very much for the fast feedback. I will use the 'Provide iBooks Author Feedback' menu, as suggested.

  • Is it possible to have an image as an initiator and when dropped into a box becomes a separate module (ie: customer/feedback form)?

    Hi guys,
    I want to make a template generator wherein the symbols (images) would be dragged into a box and would become a separate module (feedback form, calendar, data grids, etc) which could then be arranged/deleted by the user accordingly. Is this possible? And can someone point me in the right direction?
    Thanks in advance,
    John

    Thanks for the help Adobe!
    I guess you guys don't have a clue either...F* this, I'm getting JavaFX (at least their customer support is hell of a lot better).
    F*ckers
    No wonder you guys at Adobe want the community to donate/share their ideas and creations.....its because you have none.

  • Is it possible to have an adress field with a Custom Object?

    Hello,
    I would like to link a service request to an account and an intermediary such as a travel agency. But the original datamodel only allow one account per Service Request.
    So, I have created a custom object (Intermediary) that should have similar relations with other objects than the Account one. With this object, I will be allowed to link my two accounts to the SR. But I would like to insert an address field in my custom object. Unfortunately, this kinf of custom field type is not available...
    Is there any solution to have one? Or is there another solution I could use to link 2 accounts to a Service Request?
    Thanks in advance,
    Laurent

    We had the same problem. Decided to use one of the new custom objects (CO-05) for this purpose. The drawback of using it this way is the lack of automatic formating of the address lines by country selected like you get with accounts and contacts. On the good side, you can designate fields for use in interfacing with your external business system, i.e. Oracle eBS, JDE, etc.
    We also added a link to this to bring up a modified Customers On Line form from Oracle eBS that gives us a view of the Quotes, Orders, Service Requests, Installed Base, Invoices and Credit Memos by customer party id number contained in eBS. This is what we call a 360 degree view of the customer.
    Neil @ Emerson Process

  • Possible to have a text field display current path of the pdf file?

    Would it be possible to display the current (windows) path of the pdf file in the page footer? Something we do in Word & AutoCAD... is it possible & how in Livecycle?
    thanks

    You can get the path of the current doc by using the command:
    event.target.path
    The filename can be retrieved by using:
    event.target.filename
    You can set these in a field on the master page so that it will appear as you want at bottom of every page.

  • Manipulation of the size of an image inserted into an Image Field

    Hi,
    I'm learning LiveCycle Designer ES 8.2 as I go. My apologies for the lengthy post but I'm trying to give you as much background as possible.
    I'm are trying to design a form that will allow us to automate data entry (by importing fields into our Access dbase instead doing the data entry by hand).  However, at the end of the day, I also need an electronic pdf file of the same form and a printed paper copy.  Things have been going well until working with the Image Field.
    The form is fairly complicated - 4 pages long.  We're collecting extensive data on specific locales (location, what was seen there, who did the work, etc). On one page, three different images (maps) are needed, each one showing different details on the site's location.  [Please note these images will not be imported into the database but must appear in the electronic pdf and on the paper copy.] The people who fill out the forms are expected to do so using Adobe Reader (the form will have extended rights so that they can save the data they enter on the form).  They would then email us the form as an xml file.  Once we receive the form, we have to add some additional information and then the finalized paper copy and electronic pdf would be made.  We have already done this successfully with much simpler forms, none of which have needed Image fields.
    Here's my problem - one of the three maps required is a standard 1:50000 scale topographic map which shows things like contour lines and latitude/longitude lines.   For accuracy and comparison reasons, having the standard 1:50000 scale is very important to us, so we can make absolutely certain the submitter has the right location.  If the dot plotted on the map is out just a few millimeters, we're looking at an error that represents 100s of meters on the ground.
    The current form exists in Word - we have never had any rules about the image formats used (jpg, gif, etc) or the resolution, as long as the image was clear.  The only rule was that the scale of the topographical map image HAD to be at 1:50000 scale.  This gets very tricky because Word will automatically mess with the physical appearance of the image, based on its resolution.  In most cases, the submitter simply readjusted the image within Word, stretching/resizing it manually until the scale was correct.  Another option was to use an image in the emf file format so that Word didn't readjust the image's appearance based on its resolution. Whatever method they used was fine by us, as long as the scale was correct.
    So far, after playing with all the "sizing" options of the Image field, along with embedding or not embedding the file, I do not see any way to control the physical size of the image. On our form, the three image fields are different sizes, with 2 of them being small (~2x3 inches) and the 3rd being large (~7x7 inches). Regardless of the settings I chose for each image field, the program simply resizes the topographic map whatever Image field it was inserted into,  making the same image appear physically smaller or larger at will.  I cannot correct the scale by resizing it, like I can in Word.   Instead, when I try to select the image, all I am asked is if I wish to insert another image.  Inserting an .emf file format into the field doesn't work - it only shows a blank screen instead of the image.
    Is there a way for the user to adjust the image's physical size in the form, after inserting it (like they can do in Word)?  Demanding that everyone use a standardized resolution or image format also seems highly unlikely to work - there are too many submitters and too many programs that can be used to make the image (some are making them using GIS programs, others are scanning the bought topographic print).  I'd appreciate any help you can give me on this.  I have had very little luck tracking down discussions on Image fields and how they work best within LiveCycle.  Any comments would be helpful!

    Hi,
    I have an example here that is intended to demonstrate the difference between Positioned and Flowed subforms: http://assure.ly/i8pSdy.
    This shows how you can use a slider to change the dimensions of the image object.
    I have extended this to an example with buttons to scale the image: http://assure.ly/i8ZI5Y
    This may not be fine enough for your purposes, but it may give you some ideas.
    Good luck,
    Niall
    Assure Dynamics

  • Read only image field

    I'm using version 8 and have enabled my form in acrobat so that users can enter text in my fields. I also have an image field on my form. My question is how do I make the image field read-only so that a user can not click on it an prompt them for a file?
    I need to use an image field and not a static image for other reasons.

    I figured it out:
    this.access="readOnly"

  • How Can I Password Protect An Image Field

    Is there a trick that you know of to password protect an image field?
    I have an image field, Only few directors allowed to use it.I want to restrict others from using it.

    I put a button beside the image field that teh user can click to activate it. On the Initialize event of the Image field set the access to "readOnly" (ImageField1.access = "readOnly". Then on the click event of the button use code like this:
    var pswd = app.response("This image is protected by a password. \n Please enter a valid password.");
    if  (pswd == "password"){   ImageField1.access
    = "";} else
    {     app.alert("You entered an invalid password!")
    Paul

  • Change URL of image field

    How do I address the URL attribute of an image field in JavaScript?
    I have an image field with a URL. All I need to do is have a drop down that changes the URL of an image field so a different picture can be shown. I'm able to use the drop down to change the presence of an image field but when I try to change imageField.presence to imageField.URL, nothing happens when I make a new selection in the drop down. I've also tried imageField.value.image.href but that doesn't work either.
    Am I not referencing the URL attribute of the image field properly or doing something else wrong?

    I think this may have something to do with the fact that LiveCycle embeds all images on PDFs whether you want it to or not. I imagine if the images are embedded there really is no URL to change! This has to be some kind of bug because I can't seem to find so much as a reference to this in the documentation or discussion boards. If it isn't a bug or no way around it I'll have to find another solution for this project. Shame

  • Is it possible to have email validation?

    Is it possible to have two email fields so that a user must enter their email twice in order to validate that they typed their email correctly?
    Or any other method for validating emails are correct?
    Thanks.

    Sorry we don't support such validation that checks that the same value was typed into 2 different fields.
    You can submit this as a feature request here: http://forums.adobe.com/community/formscentral?view=idea to help us prioritize our work.
    You can mark the field as Email type, which should help to validate that email in correct format ([email protected]).
    Thanks
    Roman

  • Rotate an image field

    Hi All,
    Is it possible to rotate an image field to 45 degrees?
    Thanks in advance
    Norbert

    Oh ok!
    I thought the screenshots were from the design view because when I rotated via the xml it would show up rotated in Design view but would return back to normal in preview mode.
    Thanks Anyway Niall.
    Sincerely appreciate this!
    Cheers
    Norbert

Maybe you are looking for