Is it possible to have one central user defined exchange rate for a project

When i create deliverables for a project. It asks for an exchange rate type. On entering user i am prompted to enter an exchange rate.
Is it possible to use the exchange rate setup at the workplan level for all deliverables rather than entering the rate at each deliverable.?

Hello
The exchange rate value you set in the workplan is only used for converting planed amounts entered in foreign currency. There is no standard functionality to configure a default value for USER conversion type.
Could you further elaborate on the business requirement? Why do you use conversion type as USER for events, and not a centralized conversion type managed on the GL daily rates?
Dina

Similar Messages

  • Currency translation with user defined exchange rates in a BEx report

    Hi guys,
    our business department requests a new functionality in our BW system. They want to simulate a currency translation in a BEX report. But this currency translation should be so flexible, that the user can change the exchange rates directly in the report.
    For example: The report should show a list of all our local company revenues. In the first column the plan revenues will be shown in the local currency (each company has its own local currency: USA->USD; Japan->YPN, Great Britain->GBP and so on). This revenues comes from a normal infoprovider, loaded via flat-file.
    In the second column the user should be able to enter or change a plan currency rate. The entered exchange rates should be stored in BW for a next use. They won't maintain the rates directly in TCURR, because this rates are only for simulation use !
    In the third column the translated Revenues in Euro currency has to be shown under the use of the exchange rates from the second column.
    I investigated a lot of time in the SAP help and here in the SDN, but I didn't find any solution to realize this. Is there generally a possibility to make a currency translation with exchange rates out of the TCURR? Would it be an option to use the integrated planning function of BW? Or is this requirement to far away for an simple implementation in SAP BI ?
    I hope, someone of you has also fixed a similar problem or has a good inspiration.
    Thank you in advance.
    Thomas

    thanks for the prompt reply!
    Unfortunately, exchange rates are not a part of my cube. They are held in different tables, and referenced depending on what kind of exchange rates I need to be looking at (average rates, daily, planning etc.). The only way for me, at the moment, to know which rates have been used is to go to query global view, and look at the type of conversion, and then try to figure things out. Plus there can be a different key date used in the query, which makes things more complicated.
    Anyway, it was worth asking
    Thanks again.

  • How can I make easier case structure? Or can it possible to have one Pause and reset button in same structure.??

    hello,
    I am tring to convert my main test vi in case structure so latter on i can make some changes in that for example i want creat one pause button and reset button in that.
    I am not so much familer with case structure i want your guidence that how can i make my vi in globle case stucture in that i m having case 1 ,case 2...
    i already tried for that but then i got confused.
    here i am attaching my .llb file in that aa.vi is my main testing vi.
    will you plese guide me so i can make confort vi in case structure.
    Or can it possible to have one pause button and one reset button in same stucture,so User can pause or reset execution at any time when they want.
    Thank you very much in advance.
    Attachments:
    aa.llb ‏3338 KB

    Hello,
    I have change my entire structure ,now is it possible to have pause and reset button.
    here i have attached my changed vi.
    if still any changes required then please suggest me.
    Thank you.
    Attachments:
    aa.vi ‏75 KB
    aa1.llb ‏3333 KB

  • HT204053 I would like to have one apple ID and sign in for the Australian Apple Store and for the New Zealand Apple Store without it asking me to switch stores. Is this possible?

    I would like to have one apple ID and sign in for the Australian Apple Store and for the New Zealand Apple Store without it asking me to switch stores. Is this possible? If not can I setup two stores (one in each country) using the same email address and same password (both and / or either)?

    An iTunes account can only be used in one store at a time, and you need to be in that country with a valid billing address on your account for that country in order to use it there. An email address can only be linked to one account, so if you want two separate iTunes accounts then you will need two email addresses

  • How can we have an anonymous 'User i.d." for discussion group posts only?

    hi. Here we are asking a stupid Q on very first post. How can we have an anonymous 'User i.d." for discussion group only? Seem to be stuck with our regular old original Apple i.d. I see how that can be changed, but don't really want to cuz just want to have my posts signed with a more anonymous i.d. name. Should be simple to do, but not obvious to us now.
    Thnx

    Welcome To  Discussions thelnukus!
    The Alias of the account you are using, cannot be changed, but you can create a new Discussions Account, with an Alias that you prefer.
    You cannot delete your present account. Just stop using it, after you have created a new one.
    You can use all of the same info in the new account, Email address, User name, etc, just be sure to insert a new Alias of your choosing.
    But your Level(0), Points(0), Total Posts(2), Total Posts Online(2) and Registered Date(12/19/06), will not be transferred.
    In the new account, your Post Counts, Points, & Level Status will all start at 0. Your Registered Date will be the date you create the new account.
    Your old account, with your previous counts & level, will still be viewable, under the old Alias.
    (You really don't have anything accumulated, to be concerned about though.)
    After you quit using the old account, those 2 posts, will be archived. What that means is, that if there are no additional responses in the Threads they reside in, the Topics will get continually pushed down on the Topics list. After a certain amount of time, maybe 2 to 6 months, the Threads will be locked, so no responses can be entered. But the Threads will not disappear.
    Threads in heavily trafficked Forums, may be archived more rapidly than those in areas, with less activity.
    The Topics that you started using the old account, will show your Old Alias, in the Author field of a main forum page, but eventually, readers will have to keep going to the succeeding pages to view them.
    If someone were to do a Discussions Search, using these parameters:
    Restrict by Category or Forum: All Categories
    Restrict by Date Range: All
    Restrict by Username: Your Old Alias
    all of your posts, created since about 11/13/05, would be found.
    To create a new account,
    Log out of Discussions. You also may have to delete the Apple Cookies in your browser preferences, but I'm not sure this is necessary. Then follow either of these instructions.
    -How Do I Create My Account?
    If you haven't signed up for an Apple ID for the Apple Store or AppleCare Support website (or forgot your old one), you can create a new account on the My Info webpage. Just click the "create one" link on the right side of the My Info page. Choose your country location and preferred language from the appropriate pop-up menus, then click Create Account. In the resulting page, enter a unique name (such as your email address) in the Apple ID field and fill in your other relevant information accordingly (fields marked with * are required). Click Continue to complete the process.
    -To register, click Login in the sidebar on the right side of the Discussions page. In the resulting page, click the "create one" link at the bottom of the page, then click "create one" in the subsequent page and follow the instructions to create an Apple ID. For more information, see the Apple ID FAQ page.
    Those instructions, and more info, can also be viewed by clicking on ?Help & Terms of Use, in the right column of Discussions pages.
    ali b

  • Have one WiFi signal into the apartment for my Air, and another wifi signal for my 5c phone plan. Both from the same provider. Expensive. Is there a way to 'combine' WiFi signals so I pay only for one, but can get on the Internet with my Air?

    Have one WiFi signal into the apartment for my Air, and another wifi signal for my 5c phone plan. Both from the same provider. Expensive. Is there a way to 'combine' WiFi signals so I pay only for one, but can get on the Internet with my Air?

    Roamingnome, thanks for your response. Although I have been a Bell (Canada) customer for my WiFi signal for years, the 5c and its necessary mobility plan, is very recent. Some years ago, Bell supplied its own ‘router’ for my computer, and claimed that it was possible to get their WiFi signal only with the router they supplied. When I recently received the 5c, I wondered if the plan it requires, which is within the much wider, overall Bell zone, could be used somehow to get my Air online - some sort of tethering? - that allows me to give up the Air WiFi service and router all together, but still get the Air connected. Here in Canada, Bell Mobility and other Bell services are very separate. Any suggestions appreciated.

  • I have a MacBook Air w/ 64 GB. I have hours and hours of music/vids/etc. Is it possible to have an external drive specifically set-up for my iTunes? If so, what do I need to do? Thanks!

    I have a MacBook Air w/ 64 GB. I have hours and hours of music/vids/etc. Is it possible to have an external drive specifically set-up for my iTunes? If so, what do I need to do? Thanks!

    Yes, many people do just that. Copy your iTunes folder to the external drive. Once done, open iTunes with Option held down and select the new location of the library file.

  • User defined Number range for TD Bulk Shipments

    Hello,
    By defining Customer specific logic with certain conditions through Z table, can we have a user defined Number range for TD Bulk Shipments? As SAP std. either we can have internal number range or external. If external is opted for, then every time User has to specify the same while creating a Shipment in O4F1. There is a every chance that Users will commit mistakes. In order to avoid this can we have something automatic (i.e. System will take care).
    e.g. In SD Billing we have one User exit:- USEREXIT_NUMBER_RANGE (Module pool SAPLV60A, program RV60AFZZ). With this and depending upon certain conditions (which are maintained in Z table) we can have our own number range.
    Similarly, Can any one please suggest either a User Exit or  BAdi or some enhancement point for this requirement?
    Regards,
    Aniruddha.
    Edited by: Aniruddha Saraf on Jan 3, 2008 2:28 PM

    Hi Anirudhdha,
    There is no standard exit for number ranges like those in SD. However, you can try using the exit EXIT_SAPMOIGS_001 for this purpose. You will still need to enter internal number range in the shipment type configuration.
    Hope this helps,
    Regards,
    Ashutosh

  • Cannot combine sales order item into one DN cause LC exchange rate differ

    Our users want to combine all items into one DN(delivery notice) to save their effort on packing.
    But it is not possible because some items were added(modified) into the sales order afterward and resulted in a situation where Exchange rate for letter-of-credit procg in foreign trade(vbkd-akkur) is changed. Which makes inconsistency between Header's vbkd-akkur & items' vbkd-akkur.
    Is there any way to bypass this limitation and let those items combine into one DN?
    Edited by: Chih-Chieh Chan on Dec 10, 2008 9:56 AM

    Yes, all items share the same pricing date.
    BTW, it made me wonder that (color:red)VBKD-AKKUR is something to do with exchange rate. I used TCode ob08 to check out all of the exchange rate users maintained. To my surprise, all exchange rate records exist no such identical value as shown in VBKD-AKKUR where that Sales Order number is under my concern. That's odd.

  • SBO crashes on changing user defined field setting for a form

    Hi,
    when i try to change the user defined field settings(Tools->User-Defined Fields->Settings) for a form, say Sales order form, on clicking on OK button SBO crashes displaying runtime error messagebox.
    This happens only when my addon is running.
    Anyone encounter this behavior?
    Thanks,
    Satish.

    Hi Barend,
    I have put in the filters.The form 38(user-defined fields settings form) is not included in the filters.So it should not get any events. I get the following error
    Microsoft Visual C++ Runtime Library
    Runtime Error!
    Program ..m Files\SAP Manage\SAP Business One\SAP Business One.exe
    This application has requested the runtime to terminate it in an unusual way.Please contact the application's support team for more information.
    Thanks,
    Satish.

  • APP-ALR-04106: Please correct the user-defined SQL statement for this alert

    Hi All,
    I have created an alert for engineering module in R12. It got tested and was working fine. when the user testing it, while trigger the alert getting the error, "APP-ALR-04106: Please correct the user-defined SQL statement for this alert".
    when verified the alert, it got verified and ran also. It parsed the query successfully and when run it fetched few records.
    Need help in resolving the issue.
    Thanks in advance.
    Regards,
    sri
    Edited by: user10939296 on Jan 18, 2010 1:16 AM

    Hi Sri;
    I have already gone through the Note: 948037.1. But this note is related to 11i. The solution provided in the Note is for 11i.
    I am facing this issue in R12. Is this patch applicable to R12?I belive its not. But u can check Solution part 4 for your instance, at least it can give you idea. The other note in metalink related bug and all for R11 too.
    I belive its better way to rise Sr while waiting other forum user response to that thread
    Regard
    Helios

  • Doki, one of the biggest Adobe Air for iOS projects, released yesterday

    I am proud to present one of the biggest Adobe Air for iOS projects, that was released yesterday. Amazingly, the project completed in less that a year. Doki is a unique modern method of learning the basics of a foreign foreign language without the use of grammar and writing.  Through colourful animated scenarios and characters, Doki brings to life a number of languages through real life situations, humour and interactive exercises. Exclusively designed for the iPad 2, New iPad, and iPhone 4S, Doki teaches five different languages: English, French, German, Iberian Spanish and Latin American Spanish. Each language has two levels: Doki and Doki Further.  Both levels have been designed to teach the basics of these languages so that you can communicate with confidence.  In Doki, a beginner’s level, the learner navigates through 14 chapters or ‘places’ in Doki City, listens and repeats the phrases and then solves simple interactive exercises.  Each chapter is divided into lessons (a total of 51) that present key words and phrases in English and the other languages Doki covers. Doki Further, a more advanced beginner’s level, consists of 9 chapters with 28 lessons that take place in Doki City.
    The development of Doki is based entirely on Adobe Air . The result is spectacular. With a development team that consisted of 5 programmers, 2 designers, 3 language specialists, one assistant programmer, plus a team of 4 testers, the gigantic project of 14 apps was completed in less than a year, resulting in very low development costs!
    Please visit http://www.dokispeak.com for further details.

    Pretty cool.

  • User defined class objects for a ADF component (button,inputfield)

    How do I define a user defined class object for ADF objects?
    My requirement is that when I do a modification to the class object, it should get reflectected to all the instances on my page.
    E.g:- I'm having class object clsInputField, and all my input fields in my pages are based on this object. So when I change clsInputField it should get reflected to all my controls based on this class object.
    Please help!!!

    Hi Timo,
    In our client server environment, we have a custom control for managing the zip code (used a Custom InputText field which extends the actual TextField) . All zip code specific validations are written in this custom class. In our application many of the pages uses this Custom component. So if any of the zipcode specific behaviour changes, we could implement this by only changing the Custom InputText field class.
    We need to implement this behaviour in our ADF applications. Please advise.
    Thanks,
    Vishnu

  • How to let the user define the colors for each plots in the graph (I use LabVIEW 7)?

    How to let the user define the colors for each plots in the graph (I
    use LabVIEW 7)?

    Hi,
    Take a look at this example, it uses property nodes to select tha
    active plot and then changes the color of that plot.
    If you want to make the number of plots dynamic you could use a for
    loop and an array of color boxes.
    I hope this helps.
    Regards,
    Juan Carlos
    N.I.
    Attachments:
    Changing_plot_color.vi ‏38 KB

  • Is it possible to have one library used between two users?

    Hello, I am setting up a friend's computer to have a seperate user for him and for his wife. The computer has been in use for about a year with just one user. Adding the second one makes sense for everything they use the computer for--except iPhoto. They have roughly 11,000 images in the library and want to be able to access, edit, export, etc them from whichever user is logged on. They would like it to work so that when one user adds images to the library, the other user has access to them as well. I looked into the sharing photos option, but it seems to restrict you to read only access when viewing shared libraries. Any suggestions on the best option for them? They are using a dual G5 Tower running iPhoto 5.0.4
    Thanks, Alan
    Powerbook 1.25 GHZ    

    Hey,
    saw this in macworld:
    (I haven't tried this, but it does indicate that permissions include read and write)
    Family Album
    My son and I share an iMac at home. Is there a way for us to use the same iPhoto library?—Kiki Mulliner
    With the proper privileges, this can be done with aliases. It works this way:
    Choose the most up-to-date iPhoto Library folder (located at your user folder/Pictures) and move it to the Shared folder inside the Users folder at the root level of the hard drive. Click on the iPhoto Library folder, press Command-I to call up the iPhoto Library Info window, click on the Ownership & Permissions triangle, and then click on the Details triangle below. Select Read & Write from the Access pop-up menu directly beneath the Group pop-up menu, select Read & Write from the Others pop-up menu, and then close the Info window. Hold down the Command and option keys and drag the iPhoto Library folder back to the Pictures folder to create an alias.
    Switch to your son’s user account, change the name of his iPhoto Library to something like iPhoto Library Old (in case you want to use this library again), open the Shared folder within the Users folder, and Command-option-drag that folder’s iPhoto Library folder to your son’s Pictures folder to create an alias.

Maybe you are looking for