Is it possible to have source and target schema in the same DB instance ?

Hi All,
I'm using Oracle 11gR1.
I have switched source locations from other server to the one with OWB.
During deploy I get VLD-3064 and I can't deploy mapping because of many 'table or view does not exist' warnings.
Is it possible to have source and target schemas in the same instance ??
How to do it ?
Regards,
Martin

Hi Jörg,
Thanks for your help and quick answer.
I'd like to clarify a little your answer :
1. Are the any special privilages I need to set ? Currently I have only 'RESOURCE' and 'CONNECT' (I think I didn't have to add any other privs when that schema was located on other instance...)
2. Also VLD-3064 states that : 'Owning and referenced location of this connector are on the same database instance. Unless explicitly referenced in configuration settings no generated code will use the dataabase link resulting from deployment of this connector'. Does it mean I have to put something in configuration ?
Thanks,
Martin

Similar Messages

  • Source and Target Table in the Same schema........will that work in ODI

    Hi ,
    Is it possible to have my source and target tables in the Same achema.......will it have any performance issues or some other issues in our ODI.......
    I would like to know whether it works well or not .........
    ( To my understanding it wont have any issues ......But I am not 100 % sure on my judgement)
    Thanks
    AK

    Yes, you're correct.
    Just be sure about you load strategy, it means, if you need only to insert use the KM Control Append, but if need update too, try the IKM Oracle Incremental Update... I believe that will work better for millions of lines.
    Anyway be sure that your database has the necessary tablespaces to manage huge data volume.

  • Can source and target tables be the same

    Hi there,
    I need to restate profit center column in the delivery fact table. Historical Profit Centers need to be populated since today is the first time we brought in Profit Center field from LIPS table. The source for the delivery fact table is SAP LIPS table. so what I did is:
    joined the LIPS and delivery fact table on (LIPS.delivery number = deliveryfacttable.delivery number & LIPS.delivery line item number = deliveryfacttable.delivery line item number) to get the profit center.
    So the source and the target delivery fact table are the same. Is this a good practice becuase Data services warns me that the source and target tables are the same.
    Please let me know a better alternative approach to this OR a better approach to restate fields for historical data. Thanks in advance.
    Regards,
    samqiue

    Arun,
    actually the LIPS resides on another server and in order to fetch data I have to write an R3 ABAP data flow, so I cant use it directly in a lookup.
    Except what Im thinking based on your reply to use a lookup table is: that I will extract 3 colums (delivery number, delivery line item number and profit center) to a table and then use the lookup.
    Thanks.
    Regards,
    samique

  • Is it possible to have Leopard and Snow Leopard at the same time?

    If you have an Imac with an external USB HD, can you have Leopard on the HD of the iMac and install a fresh copy of SL on the HD? Would it work?

    Thanks for asking, you reminded me of two things to keep in mind. Let's say you have two drives, let's call them SL and Leo. If you boot with SL all your preferences and settings are on the SL drive and if you boot with Leo, they are on your Leo drive. There's no crossover and nothing dangerous to worry about.
    There are, however, two little things to think about. a) by default, when you boot with Leo your files will save to your Leo account folder and when you boot with SL they'll default to your SL account folder. This can get confusing. There are several solutions but the easy one, and the one I used, is to use DefaultFolder and set default save folders so that the file selector automatically chose my SL folder to save into.
    The other issue involves Spotlight. When you switch from one OS to the other, Spotlight will try to reindex both drives. This isn't dangerous but it does bog down a slower computer. My solution was to use the Spotlight preference in Leopard and turn indexing off completely by making both drives private.

  • Error saving map. Stored procedure returned non-zero result. Check if source and target schemas are present.

    I am using VS 2012 and BizTalk 2013 and attempting to deploy an application to BizTalk when I get these errors:
    Error 47
    at Microsoft.BizTalk.Deployment.Assembly.BtsMap.Save()
       at Microsoft.BizTalk.Deployment.Assembly.BtsArtifactCollection.Save()
       at Microsoft.BizTalk.Deployment.Assembly.BtsAssembly.Save(String applicationName)
       at Microsoft.BizTalk.Deployment.BizTalkAssembly.PrivateDeploy(String server, String database, String assemblyPathname, String applicationName)
       at Microsoft.BizTalk.Deployment.BizTalkAssembly.Deploy(Boolean redeploy, String server, String database, String assemblyPathname, String group, String applicationName, ApplicationLog log)
    0 0
    Error 49
    Failed to add resource(s). Change requests failed for some resources. BizTalkAssemblyResourceManager failed to complete end type change request. Failed to deploy map "XXX.BTS2013.XXX.Maps.map_XXXX_R01_InsLabProc".
    Error saving map. Stored procedure returned non-zero result. Check if source and target schemas are present. Error saving map. Stored procedure returned non-zero result. Check if source and target schemas are present.
    0 0
    Error 46
    Failed to deploy map "XXX.BTS2013.XXX.Maps.map_XXXX_R01_InsLabProc".
    Error saving map. Stored procedure returned non-zero result. Check if source and target schemas are present.
    0 0
    I also tried to Import a MSI file from our test environment to see if that would work...got the same errors.  After spending hours (not kidding) looking for an answer, all I could find is that a hotfix would work.  So, I got the hotfix from Microsoft
    Support and applied it then rebooted.  Still getting the same errors.  I'm absolutely at a stand still.  Interesting that I got this application to deploy yesterday and then the next time I deployed it I started getting these errors.  I'm
    ready to pull my hair out!
    Is there an answer for this out there somewhere?  Any help would be appreciated.
    Thanks,
    Dave

    Hi Dave,
    Which hotfix have you applied? I don't think a hotfix of this issue is available for BizTalk 2013 yet. You should create a
    support ticket with Microsoft to get a solution.
    If this answers your question please mark as answer. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

  • Connecting the source and target schemas to ODI

    Hi ,
    I have recently started learning ODI tool for data integration. I need to use this tool as a part of Deal Management product related work.
    I have gone thru the documentation available in OTN for ODI. they were describing everything using the demo environment.
    problem:
    Can any one please tell me how to connect source schema and target schema to the ODI ...?
    Both the source and target schema are in the Oracle database of the loaclhost.

    Hi,
    Right Click ur Dataserver , In the bottom u will have option insert physical schema.
    Click that u will have window opened........
    In the Definition Tab:
    Specify ur Schema name and Work schema .......u r going to use .
    Enable the default option also....
    In Context Tab:
    Specify ur context Name and Type in the Name u want to have for ur logical Schema, it autmatically creates the logical schema ...for u.
    and click ok .
    hope it helps u.....
    Thanks
    AK

  • Is it possible to have multiple different texts conversations with the same two people?

    In iOS 8.1.3 is it possible to have multiple different text conversations with the same person? I'm looking for a way to set an old conversation aside to talk about something new.
    Is this possible?

    speculation is agaisnt the ToS here, but you never know (I was shocked when we got 8 track recording in GB2)
    best thing to do is to send Apple some Feedback and let them know what features you want (they really do read what's sent):
    http://www.bulletsandbones.com/GB/GBFAQ.html#sendfeedback
    (Let the page FULLY load. The link to your answer is at the top of your screen)

  • My macbook pro is frozen, the mouse moves, but it will not click.  I have restarted and it is still the same... Can anyone help me ?

    my macbook pro is frozen, the mouse moves, but it will not click.  I have restarted and it is still the same... Can anyone help me ?

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, or by corruption of certain system caches. 
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and  Wi-Fi on certain models. The next normal boot may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

  • Is it possible to have two Excel workbooks open at the same time but only have one show the Document Information Panel?

    We are using SharePoint 2010 and Excel 2010. In SharePoint, we have created a custom content type that uses an Excel workbook template along with a Document Information Panel (DIP -- an InfoPath form) that always displays when a workbook of this custom
    content type is opened.  That's all working fine.  However, if one of those Workbooks is open with the DIP displayed and the user opens another Excel workbook, a DIP displays for the 2nd workbook even if it's just a regular workbook,
    i.e. not one of the custom content type.  If the user closes one of the DIPs, both close.  And if the user displays one of the DIPs again, both display. 
    Is there any way to separate out the DIP display for specific workbooks during the same Excel instance so that it shows in one but not in the other?  Or is this just something we have to live with (and train our users on)? 
    Thanks in advance.  Carol.

    Whether the DIP shows or not is a client side toggle, not something tied to an individual workbook.  So if you are using the same client instance then the DIP will display or hide based on what you did in the other workbook.  YOu might be able
    to create a macro that would display or hide it, but that's a lot of work for little advantage.  I would train the users and live with it.
    Paul Stork SharePoint Server MVP
    Principal Architect: Blue Chip Consulting Group
    Blog: http://dontpapanic.com/blog
    Twitter: Follow @pstork
    Please remember to mark your question as "answered" if this solves your problem.

  • How do i have landscape and portrait slides in the same keynote file?

    how do i create landscape and portrait slides in the same keynote file?

    You cant, its one or the other not both, the slide size setting is for the whole presentation, not for individual slides.
    The slide format is chosen to match the display the presentation is shown on. I have presentations showing on vertical, horizontal, square, circular and iregular shaped screens with rear projection, but a single format must still be set.

  • To see if you can have XP and Windows 7 on the same computer?

    I am new to Forums so I don't know if I am in the right place to ask this question. Can you have the older XP and have Windows 7 programmed on to the same computer? This concerns using an older printer that requires XP.

    Hello Joseph Hill.
    This question should be asked in the
    Windows Answers Forum.
    Anyway, two Windows versions can coexist if you choose one of the following options
    create a dual boot configuration: create 2 partitions on the hard disk, install Windows XP in the first one and Windows 7 in the second one; the Windows 7 boot loader will detect the Windows XP installation and configure the boot loader to display a menu
    that will allow you to choose the Windows version you want to start. You can then install and configure your printer in Windows XP, but it won't be available for you to use it in Windows 7;
    install only Windows 7 and create a virtual machine: you'll install Windows XP in the virtual machine and then install and configure your printer in Windows XP.
    Bye.
    Luigi Bruno
    MCP, MCTS, MOS, MTA

  • Myself and my partner both have ipods and want to use the same computer for them is that possible if so how please

    we are trying to use 2 different ipods on the same computer but it says we have to delete the music and  re format cos the music doesnt belong that ipod evertime we connect another ipod

    Yes. See:
    How to use multiple iPods, iPads, or iPhones with one computer
    What is the best way to manage multiple...: Apple Support Communities

  • Is it possible to have two numbers that ring to the same phone? I neede a Texas direct number and a Salt Lake City direct number?

    I need two phone numbers with different area codes linked to the same phone, can this be done?

    You can always port a number you already have to Google Voice. The Google Voice account has to be associated with an active cell phone number and then you can have the Google Voice number ring on whichever phone you would like, even multiple phones at the same time.
    When I signed up for Google Voice, I was able to choose a number from my locality. I wasn't necessarily able to get the exchange I wanted, but I certainly got the same area code. I don't know if it has changed since.

  • TDMS: is it possible to use sender and receiver client within the same SID

    Hi all
    I have a general question about TDMS: i always read that it is possible to refresh data from a productive system/client to a test system/client, e.g. PRD100 => DEV100. But is it also possible to refresh data from one sender-client to the receiver-client inside the same system using TDMS, e.g. DEV100 => DEV200.
    i'm asking because if i start to build up a new client using tdms the first step is to build up the client using package "ERP Initial Package for Master Data & Customizing". This includes under point "data transfer" the step "lock the system" with teh following description:
    Lock System
    Activities
    During data deletion in the receiver client, the tables are dropped. All clients in the system are affected by this procedure. Consequently, all users in all clients in the receiver system must be temporarily locked while the data deletion takes place.
    The function for this activity locks only the current client. If the receiver system is a single client system, it is sufficient to execute the function. If, however, the receiver system is a multi-client system, the user in the other clients must be locked using standard means.
    Anyone has any experience with this scenario inside the same system?
    Regards
    Adrian

    You can run TDMS package on the same system and between different clients. However SAP don't recommend to run TDMS package on the same system.
    There are 2 ways to delete data in receiver system: Array delete and drop insert.
    You have to use Array Insert only which is usually very slow as it first select all the relevant entries from the tables in the target client and then drop it. So, it is slow.
    Drop insert is much optimized and fast but the same can not be used in this use case.
    That is the reason SAP don't recommend to have TDMS run in same system.

  • Lookup Table and Target Table are the same

    Hi All,
    I have a requirement in which I have to lookup the target table and based on the records in it, I need to load a new record into the target table.
    Being very specific,
    Suppose I have a key column which when changes I want to generate a new id and then insert this new value.
    The target table record structure looks like this
    list_id list_key list_name
    1 'A' 'NAME1'
    1 'A' 'NAME2'
    1 'A' 'NAME3'
    2 'B' 'NAME4'
    2 'B' 'NAME5'
    As shown the target table list_id changes only when the list key changes. I need to generate the list_id value from within OWB mapping.
    Can anyone throw some light as to how this can be done in OWB???
    regards
    -AP

    Hello, AP
    You underestimate the power of single mapping :) If you could tolerate using additional stage table (with is definitly recomended in case your table from example will account a lot of rows).
    You underestimate the power of single mapping :) It you could tolerate using additional stage table (witch is definitely recommended in case your table from example will account a lot of rows), you could accomplish all you need within one mapping and without using PLSQL function. This is true as far as you could have several targets within one mapping.
    Source ----------------------------------------------------- >| Join2 | ---- > Target 2
    |------------------------ >|Join 1| --> Lookup table -->|
    Target Dedup >|
    Here “Target” – your target table. “Join 1“ – operator covers operations needed to get existing key mapping (from dedup) and find new mappings. Results are stored within Lookup Table target (operation type TRUNCATE/INSERT).
    “Join 2” is used to perform final lookup and load it into the “Target 2” – the same as “Target”
    The approach with lookup table is fast and reliable and could run on Set base mode. Also you could revisit lookup table to find what key mapping are loaded during last load operation.
    Serhit

Maybe you are looking for

  • Pesquisa formatada para trazer preço de lista para UDF (linha) na cotação?

    Tenho uma situação onde tenho que trazer o preço de lista para o item em um documento de marketing, no caso uma cotação, antes do campo usual do sistema, isto é, num campo definido pelo usuário criado, para agregar a ele valores adicionais de Despesa

  • Error while deploying the SC on server.....

    Hi, We are trying to deploy a Software Component that we created and when we try to deploy it on our server, it gives us the following the error : Application error occurred during request processing.   Details:   Error [com.sap.engine.services.servl

  • GR Qty more than Delivery Qty in Production Order

    Hi there are a amazing Production order that GR Qty more than Delivery Qty of finished goods in this production order. there are some data in this production order as below: Order Qty = 2680 Delivery Qty = 2680 Tolerance = 0 However, to my surprise,

  • Synching Issues After Desktop Manager 6 Upgrade

    Since I upgraded to Desktop Manager 6.0.0, I have two problems: 1) it no longer is synching my notes and tasks. When I click  "Organizer" to look at the configuration options, it now says that Tasks and Memo Pad are not installed. They used to synch

  • Firefox simulaneously slow on all my (4) computers since latest update

    I only used Firefox for years, but since the latest updates it's slow (in excess of minutes on some of my computers) to open websites like www.hln.be. On my slowest (home) computer it can take up to 8 minutes to open that specific news website. If I