Is it possible to have the crop marks where you want when making a PDF?

Is it possible to have the crop marks where you want when making a PDF?
So if I have an Indesign document 84x55 with a 3mm bleed but I want a PDF from that document to crop at 85x55 (adding .5mm to the left and right of the PDF), the crop marks are offset by 3mm but I want the left and right crop to be .5mm out into the bleed and not at the document edge.
Resizing the Indesign file is ruled out for the moment.
Thanks, Tim

The automatic crop marks will always indicate the trim size of the document as defined in Document Setup, so the simple answer is no. You will need to draw custom crop marks in the slug area. You can set the slug area my clicking More Options in Document Setup.
This is a highly unusual request. The purpose of crop marks is to indicate the one and only trim area for the page. Why do you want crop marks that don’t match the document size?

Similar Messages

  • Is it still possible to have the option to "open" a file when downloading it instead of saving it to the downloads folder?

    The question pretty much says it all: the old versions of Firefox used to allow you to select "open" when downloading a file instead of saving it to a directory. I am fully aware that that's what selecting "open" does anyway, but I still like that option. Is it still available? That's one of my major irritations with Chrome, which I am considering switching from since Firefox 4 is faster.

    You can do that with the OpenDownload² add-on - https://addons.mozilla.org/firefox/addon/opendownload-10902

  • Can anyone tell me how to convert crop marks to registration on a supplied pdf. The pdf also has spot colours which the crop marks need to be in too.

    Can anyone tell me how to convert crop marks to registration on a supplied pdf. The pdf also has spot colours which the crop marks need to be in too.

    Greetings,
    I've never seen this issue, and I handle many iPads, of all versions. WiFi issues are generally local to the WiFi router - they are not all of the same quality, range, immunity to interference, etc. You have distance, building construction, and the biggie - interference.
    At home, I use Apple routers, and have no issues with any of my WiFi enabled devices, computers, mobile devices, etc - even the lowly PeeCees. I have locations where I have Juniper Networks, as well as Aruba, and a few Netgears - all of them work as they should.
    The cheaper routers, Linksys, D-Link, Seimens home units, and many other no name devices have caused issues of various kinds, and even connectivity.
    I have no idea what Starbucks uses, but I always have a good connection, and I go there nearly every morning and get some work done, as well as play.
    You could try changing channels, 2.4 to 5 Gigs, changing locations of the router. I have had to do all of these at one time or another over the many years that I have been a Network Engineer.
    Good Luck - Cheers,
    M.

  • Help on saving back from CS4 to CS3 with the crop mark issue.

    I am not asking how to create crop marks I needing to know how to save back from CS4 to has already has been created in 3. See issue below.
    I am the only one with CS4 in this office. I have to save back to CS3 for everyone else to read. When looking in the artboard, I can see the un-editable crop marks that were made in CS3, but when I work on the file and save it down, they can no longer call up the crop marks. Any clue as to were they might access what should be there?

    These work great, thank you so much!
    So long as I only work on new stuff, I guess it doesn't matter if I switch to CS3.  :-)   I'll turn down requests for major edits to long documents already done in CS4!
    We have 2 feet of snow on the ground here and are expecting 10-20 more inches of snow starting around noon!  DC is basically shut down.  I live right in the middle of the District, and the roads are a mess here.  I can't imagine how bad the suburbs are.
    Thanks again!
    Phyllis

  • Is it possible to have the same audio clip be playing nonstop between menu's in idvd '11? I want to be able to go from one menu to the next without the audio cutting out on me. Thanks for any support! I have tried searching the forrums but no luck yet.

    Is it possible to have the same audio clip be playing nonstop between menu's in idvd '11? I want to be able to go from one menu to the next without the audio cutting out on me. Thanks for any support! I have tried searching the forrums but no luck yet.

    No.
    OT

  • Is it possible to have the Firefox Icon in windows' taskbar flashes when any of my app tab changes?

    Is it possible to have the Firefox Icon in windows' taskbar flashes when any of my app tab changes?

    Not possible to configure this in Adobe Reader.

  • I have a problem with my iphone,after upgrade software ios 6.0.1,  is not possible to use the wi-fi, used until now, because is not possible to have the login, i find this message " the requested URL  was not found

    I have a problem with my iphone,after upgrade software ios 6.0.1,  is not possible to use the wi-fi, used until now, because is not possible to have the login, i find this message " the requested URL  was not found

    You have to go to autherized iPhone agent.

  • Is it possible to have the lid open on a MacBook Pro connected to a Cinema Display and have the Mac display blank with the Cinema in highest definition?

    Is it possible to have the lid open on a MacBook Pro connected to a Cinema Display and have the Mac display blank with the Cinema in highest definition?

    Hi,
    Create a play list that you wish to burn. Select playlist, the file from main menu which gives to an option to burn the playlist. A pop up box appears allowing you to select burn speed and disc format.
    Jim

  • Is is possible to have the images as thumbnails and make it so you can click on them for a larger view and then click them again to have it go back to the original size? In an interactive pdf?

    I am designing an interactive catalog in a pdf. Is it possible to have the images as a thumbnail and then click them to enlarge the image and then click again to make them go back to the original size?
    Thank you in advance!
    Stephanie

    It can be done with Show/Hide buttons:
    Here's a button created from a small version of the image (notice that it's selected in the image below):
    The small button has a Show/Hide Buttons and Forms action. It's action is to make the Larger Image visible (eyeball turned on) with the small image hidden (eyeball turned off).
    The large image is also turned into a button (shown below):
    Notice the checkbox "Hidden Until Triggered". The large button is hidden until it's triggered by the small button. Clicking on the large image also causes a Show/Hide action which shows the Small button and hides the large button.

  • For any given Bookmarks folder, is it possible to have the subfolders appear *above* individual links?

    For any given Bookmarks folder, is it possible to have the subfolders all appear *above* the individual links (as they do in Internet Explorer), rather than mixed together alphabetically? (Or is there perhaps an add-on that will allow me to do this?)

    Provisional solution is to place one or more zeros in front of your folder names, that way they should always appear on top in their alphabetical order.

  • Is it possible to have the loudspeaker activate automatically during voice call?

    When answering and making voice calls, is it possible to have the loudspeaker activate automatically during the voice call? Is there any settings on the device which can be changed for this to happen?

    Thanks cor-el! I had tried that out, but was turned off by the different workflow (can't click Tab to select the address suggestions) and assumed by the look that I couldn't use my Smart Keywords for searches.
    In fact, the workflow isn't that much bulkier and the Location Bar is fully functional:
    * ''for a search: Ctrl+L, (Smart Keyword +) [search terms], Enter''
    * ''for a suggested address: Ctrl+L, Down, Enter, Enter''
    Still, it would be nice in future versions if:
    # the Location Bar could automatically open when opening a (blank) new tab (just as the cursor automatically goes to the Location Bar when a new tab is opened with the Navigation Toolbar showing) to avoid the Ctrl+L step of the workflow
    # the Tab, Enter workflow could be enabled for selecting address suggestions in the pop-up Location Bar
    Or (most simply in my mind):
    if '''the Navigation Toolbar could be set to show when a (blank) new tab is opened and disappear once an address/search is selected'''.

  • Is it possible to have the Grid Server send an alert for blocking locks?

    All,
    We are deploying a new custom application. I'm the DBA. Our development team wants to be alerted if any processes in this new application are being blocked for more than 30 seconds. I believe that I can setup an notification from the Grid Control to alert me if more than 1 process is waiting but I'm not sure about the ability to alert when a blocking lock is occurring for more than a period of time.
    Does anyone know if this is possible? Or , can anyone give me some points on how I might write a custom notification?
    Thanks in advance.
    John

    OEM provides this metric out of the box though if you wanted to limit the check to a specific type of lock, or application you would have to write your own UDM (User Defined Metric) which is a trivial task. The minimum time interval is minutes but I assume you could use 0.25 minutes to check every 15 seconds, and be notified if it repeats twice (so this would be 2 repeated alarms over 30 seconds and match your criteria, correct?).
    Check the documentation for creating a UDM if you choose to go that route.
    Hope this helps.

  • Imput - Is it possible to have the same live edit result

    Is it possible to have the same live edit result with a xml
    fiel on client side than :
    http://www.peoplesdns.com/ajax/?edit=2
    Thank for your reply.

    No.
    OT

  • PDF : Crop to the crop marks using Acrobat 7

    Hi
    at the moment, i remember the sizes of the top,bottom,left, right margins to crop PDF to required printing size
    before i save it as PDF again using Acrobat 7 crop tool. I was wondering, is there a auto detection of the crop marks feature in Acrobat.
    it will save me abit of time if i can avoid type the margins or having to deal different page sizes.
    thanks.
    Jo

    Hi terenceg40046976,
    There is no need to worry as the lock symbol on the file icon indicates that the PDF files are secured.
    You might refer the below mentioned link to remove security from your PDF:
    http://blogs.adobe.com/acrobatforlifesciences/2010/04/removing_security_from_pdfs_in/
    Let me know if this helps.
    Regards,
    Anubha

  • Is it possible to have the camera lens replaced?

    Some how my camera lens has gotten scratched up, so now every time I take a picture it comes out blurry. Is it possible to have the lens replaced? Has anyone ever had that done?

    I don't believe Apple does this.  They will exchange your phone under an out of warranty exchange for $149

Maybe you are looking for

  • Bug in autosmart port macros

    Good morning, I'm observing what appears to be a bug in the smartport feature on our SG300 switches. We use this for our Auto Voice VLAN. We are using our own user defined macro's in place of the ip_phone and ip_phone_desktop as we use native vlans d

  • Greater than or equal to problem.

    Hey All, I'm building a script for Final Cut Pro (7) this is a small part of the entire script and I am having some difficulties getting this to work. So, the objective is to get a number from the user, then to have the number escalate as it repeats.

  • Sun Java Outlook Connector with IMS 5.2/Calendar 6.0

    Is anyone using this? I understand using Outlook with an Exchange Server there was an option under tools to setup an "out of office" message. Does anyone know if this functionality exists within Outlook using IMS5.2, or do we have to have folks go to

  • Good receipt PO hit GR/IR account

    Is it possible when good receipt PO not to hit the GR/IR account ? Our user only wants to hit the expense account when the check is cut. Please let me know if this is possible and how to achieve this. Thank in advance for your time.

  • Having trouble assigning the Data Type to Shared Variables

    I have some type definitions that I need to use as shared variables.  When making the shared variable, I create it and then name it.  I then select "From Custom Control..." in the Data Type field and select the applicable type definition.  The proble