Is it possible to hear playback during edit?

I hail from the analog days of editing where I could tweek the reel back and forth to find that exact spot to splice. This happens automatically in iMovie when you drag your edit bar across clips - plays both audio and video at the speed and in the direction you're moving. Is this possible in GarageBand '11?

prattlepants wrote:
Any advice on how to edit efficiently without the benefit of scrubbing?
use the zoom slider to get the tightest view that you can.
i often find using the Track Editor pane:
http://www.bulletsandbones.com/GB/GBFAQ.html#opentrackeditorpane
(Let the page FULLY load. The link to your answer is at the top of your screen)
useful for getting a better view (also zoomed in tightly), though i still use the timeline for the actual edits

Similar Messages

  • I connect my mic with an M-audio mobile pre usb device.  When I try to record, I can see that my voice is recording but can't hear it during playback.

    I connect my mic with an M-audio mobile pre usb device.  When I try to record, I can see that my voice is recording but can't hear it during playback.  I tried different input and output settings but it didn't help.  Any help will be appreciated.

    Hear your microphone or instrument as you play and record (monitoring)
    You can hear, or monitor, input from an instrument or microphone in GarageBand while you play and record. When you turn on monitoring for a track, you hear the musical instrument or microphone connected to the track’s input. Monitoring lets you hear yourself play so that you can hear the part you want to record as well as the rest of the project.
    You can turn on monitoring for a Real Instrument track or Electric Guitartrack from the track’s header, or in the Track Info pane. Electric Guitar tracks always show their monitoring buttons, and you can show monitoring buttons for Real Instrument tracks using a menu command. You can use monitoring with feedback protection to avoid feedback while you play.
    Hide
    To turn on monitoring in the track header:
    Choose Track > “Show Monitoring for Real Instrument Tracks.”Monitor buttons appear in the headers of Real Instrument tracks. On tracks with monitoring turned on, the button lights yellow.
    Click the Monitor button in the header of the track you want to use.
    HideTo turn on monitoring in the Track Info pane:
    Double-click the header of the Real Instrument or Electric Guitar track you want to turn on monitoring for.The Track Info pane opens.
    From the Monitor pop-up menu, choose one of the following:
    Choose Off to turn off monitoring. You can hear your instrument only while you record.
    Choose On to turn on monitoring and protect against feedback.
    Choose On (no feedback protection) to turn on monitoring without feedback protection. If the input level is too high, it may cause feedback (especially if you are using a microphone and listening to your project through your computer speakers).
    For an Electric Guitar track, you can view the Monitor pop-up menu by clicking Edit, and then clicking the back side of the amp. The Monitor pop-up menu appears with the input controls below the stage.
    You should usually turn off monitoring when you are not playing or singing. When monitoring is turned on, your computer can pick up output from your speakers or monitors, causing unwanted feedback. Using headphones rather than speakers to listen to your projects can help eliminate feedback.
    If you select your computer’s built-in microphone as the audio input, in the Audio/MIDI pane of GarageBand preferences, monitoring is turned off for all Electric Guitar tracks to avoid unwanted noise.
    SEE ALSO
    If you don’t hear sound from a Real Instrument 
    Was this page helpful?Send feedback.
    © 2010 Apple Inc. All rights reserved.

  • Stop Playback Looping During Editing

    Can't seem to find where to set the loop/don't loop option. At the end of the timeline, the playback goes to the beginning and starts playback again. I want it to stop at the end and not loop (during editing). Can you help me find the setting to stop it from continuing playback from the beginning of the clip (stop playback looping during editing).
    Premiere Elements 10
    Win7(64)

    There is no direct way to stop playback AT the last Frame.
    Does the End key not work on your computer?
    Once playback has been stopped, the PageUp and PageDn keys will take you to the first Frame of the last Clip, or to the first Frame of that last Clip. The Cursor keys will also step you, Frame-by-Frame, inside the Clip.
    Good luck,
    Hunt

  • Freezing, Application Ending while using PSE 12 during editing.

    Good afternoon, I'm using PSE 12 and the application keeps on freezing and ending during editing.   Just purchased a new MAC laptop that is running Yosemite 10.10.  Any advice?  Thank you in advance. 

    CSanchez98
    If your program is Photoshop Elements 12, you have posted in the wrong forum. Your thread has somehow been posted in the Adobe Premiere Elements Forum (video editing).
    Please repost your thread in the Adobe Photoshop Elements Forum
    https://forums.adobe.com/community/photoshop_elements
    or wait for a moderator here to see your thread here and move it from here to there.
    Much has been written about Photoshop Elements 12 on Mac Yosemite 10.10 and the good people in the Adobe Photoshop Elements Forum should be
    able to advise you with the best information possible on this matter.
    ATR

  • I have had my I have had my iPhone 5c for a little over a month and people can never hear me during calls, like I'm in a tunnel or muffled! I googled this issue and several others have had this problem as well. What can I do to get help?

    I have had my I have had my iPhone 5c for a little over a month and people can never hear me during calls, like I'm in a tunnel or muffled! I googled this issue and several others have had this problem as well. What can I do to get help?

    Take it in to an Apple store or authorized service center for evaluation and possible replacement.

  • No sounds, unable to hear anything during calls

    2 weeks ago my phone stopped making sounds , and I couldn't hear anything during calls Only if I used speakerphone. I sent my phone away to get fixed and received it back a Week later having been 'fixed' with a note saying the problem was due to a corrupt file , I don't download any ringtones which it said could have caused it. I only use it for normal Internet, emails, facebook, bbm etc. 2 weeks on and its happened again although This time it won't even work on speakerphone ! I am really annoyed about this and can't Bear to be without a phone again if I send it away to get fixed . Has anyone else had this problem ? And is it possible to get the phone replaced , its still under warrenty. Thanks to anyone Able to help me

    If the original problem was due to a corrupted file, I would suggest upgrading the os before replacing the unit.
    Check out the QuickBerry Podcast! www.QuickBerryPodcast.com

  • Is it possible to hear a soundtrack in a pdf file with an iPad ?

    Is it possible to hear a soundtrack in a pdf file with an iPad ?

    Sorry, but Reader for iPad or iPhone does not yet support sound or video.
    You should get PDF Expert from Readdle. It costs US$9.99 but it's a much better reader, and, among other great features, supports multimedia.

  • How to show Append Changes previous value in text box during edit

    Hi,
    I am using multi text column with append mode, all feature of append mode is working fine,but when any other field has been changed on that time append text box take blank value.
    when using same list with ssrs ,report shows the current data,but after approved by manager current item change in blank and current data come in history.
    is any way to do ,if any body change the any item same data appear during edit time in same column.
    Hasan Jamal Siddiqui(MCTS,MCPD,ITIL@V3),Sharepoint and EPM Consultant,TCS
    |
    | Twitter

    Hi  Hasan,
    According to your description, my understanding is that the multi text column with append mode is not working fine in your SharePoint 2010.
    For reproducing your scenario, I created a new custom list , turned on its version  feature and added a multi text column with append mode. But it was working fine when I change the values of both the
     multi text column and other columns.
    For your issue, could you create a new list to verify the multi text column with append mode  works correctly.
    Best Regards,
    Eric
    Eric Tao
    TechNet Community Support

  • When using Find My iPhone, is it possible to hear live sound around the device?

    When using Find My iPhone app on the iPad2, is it possible to hear live sound around a device wham the "Play Sound" button is tapped?

    Yes.
    What do you hear?

  • Is it possible to hear music from my shuffle on my car speakers?

    Is it possible to hear music from my shuffle on my car speakers?

    Hi there,
    I would recommend taking a look at the article below.
    iTunes for Windows: Moving your iTunes Media folder
    http://support.apple.com/kb/ht1364
    -Griff W.

  • Can't hear playback with USB audio interface plugged in

    I start Logic Pro 8 and then plug in Lexicon Lambda for a USB interface between guitar and macbook pro. With the Lambda plugged in I hear nothing from mac or headphone input on Lambda. If I unplug Lambda I can hear playback from mac just fine thru speakers or headphones.
    Very appreciative of any advice on how to solve this.
    Thanks.

    berkleyrob wrote:
    I start Logic Pro 8 and then plug in Lexicon Lambda for a USB interface between guitar and macbook pro. With the Lambda plugged in I hear nothing from mac or headphone input on Lambda.
    Unplug your audio interface, reboot the Mac, plug the USB interface in, let it be recognized. Open Audio/MIDI Setup (in utilities) see if the Lambda shows up as an input and output device.
    Yes/No?
    If yes, you don't have to select if for any of the Input/Outputs, Logic's audio interface selection operates independently from the system.
    Open Logic go to "Preferences/Audio) select the Lexicon or Lambda interface as the default unit, set audio buffers to 256.
    Anything yet.
    All audio I/O will be coming from the lexicon the Mac's audio system is now out of the equation.
    pancenter-

  • Possible to make an item editable for certain users and read only for other

    Is it possible to make an item editable for certain users and read only for others?
    I've been able to accomplish this by taken the select statement that I used to define an authorization scheme, placing it in the Read Only condition of the item. However, I would like to simply reference the authorization scheme to utilize caching, and to help keep things cleaner for future maintenance.
    Is it possible to reference an authorization scheme in an item condition similar to the way another item can be referenced by preceding it with a colon (i.e. :P1_First_Name)?

    Thank you, your suggestion worked.
    It would be nice on a future release of APEX if a drop-down box existed under the Ready Only section that would allow an existing Authorization Scheme to be selected or negated when applying the Read Only attribute to a form item.

  • FCP quits during editing

    *Hi, FCP keeps quitting during editing. usually when playing the timeline.*
    *Anyone knows what's causing it?*
    Process: Final Cut Pro [354]
    Path: /Applications/Final Cut Pro.app/Contents/MacOS/Final Cut Pro
    Identifier: com.apple.FinalCutPro
    Version: 6.0.5 (6.0.5)
    Code Type: X86 (Native)
    Parent Process: launchd [84]
    Date/Time: 2009-03-03 12:22:54.713 +0800
    OS Version: Mac OS X 10.5.6 (9G55)
    Report Version: 6
    Exception Type: EXCBADACCESS (SIGBUS)
    Exception Codes: KERNPROTECTIONFAILURE at 0x0000000000000000
    Crashed Thread: 83
    System Configuration
    :Model: iMac7,1, BootROM IM71.007A.B03, 2 processors, Intel Core 2 Duo, 2.8 GHz, 4 GB
    Graphics: kHW_ATIr600M76Item, ATI,RadeonHD2600, spdisplayspciedevice, 256 MB
    Memory Module: BANK 0/DIMM0, 2 GB, DDR2 SDRAM, 667 MHz
    Memory Module: BANK 1/DIMM1, 2 GB, DDR2 SDRAM, 667 MHz
    AirPort: spairportwireless_card_type_airportextreme (0x14E4, 0x88), Broadcom BCM43xx 1.0 (5.10.38.24)
    Bluetooth: Version 2.1.3f8, 2 service, 1 devices, 1 incoming serial ports
    Network Service: AirPort, AirPort, en1
    Serial ATA Device: WDC WD5000AAKS-40TMA0, 465.76 GB
    Parallel ATA Device: OPTIARC DVD RW AD-5630A
    USB Device: Keyboard Hub, (null) mA
    USB Device: Apple Keyboard, (null) mA
    USB Device: My Book, (null) mA
    USB Device: My Book, (null) mA
    USB Device: Built-in iSight, (null) mA
    USB Device: IR Receiver, (null) mA
    USB Device: Bluetooth USB Host Controller, (null) mA
    Thread 83 crashed with X86 Thread State (32-bit):
    eax: 0xffafd401 ebx: 0x6714668d ecx: 0xffafd400 edx: 0x00000000
    edi: 0xffffffa3 esi: 0x00000000 ebp: 0xb0d47068 esp: 0xb0d4702c
    ss: 0x0000001f efl: 0x00010212 eip: 0x6713d098 cs: 0x00000017
    ds: 0x0000001f es: 0x0000001f fs: 0x0000001f gs: 0x00000037
    cr2: 0x00000000
    Binary Images:
    0x1000 - 0x75cfe8 com.apple.FinalCutPro 6.0.5 (6.0.5) /Applications/Final Cut Pro.app/Contents/MacOS/Final Cut Pro
    0xb23000 - 0xb26fe0 +KGCore ??? (???) /Applications/Final Cut Pro.app/Contents/Frameworks/KGCore.framework/Versions/A/KGCore

    Since I don't know what a lot of these crash reports really mean I can only guess. However I see it reporting MyBook on a USB port. FCP wants firewire for external drives.
    Try that, repairing permissions and resetting FCP prefs tho I suspect it's the drives on USB. try that first

  • Editing 4k RED files in CS6, does SLI help in playback and editing? (GeForce GTX-760 vcard)

    I just bought a GeForce GTX-760 card and noticed great improvements to video playback over my old card.
    I want to start editing RED 4k files and be able to play them back in 4k, currently I can achieve smooth playback in 1/2 resolution, but thought if I bought a 2nd card and used the SLI I'd be able to get 4k to playback on my system... would this work?
    I've been doing searches for this, but can't find much on using SLI in Premiere CS6...
    Short of getting a RED Rocket, how could I achieve smooth RED 4k playback and editing in CS6?
    Thanks all!
    Aza

    WIth CS6 you are limited to ONE video card.
    With CC, SLI does not help. See Tweakers Page - What video card to use?
    A second video card can help marginally with CC only, but the one thing that really helps is more cores, more L3 cache and higher clock speed.
    See Tweakers Page - Exporting Style

  • Aperture corrupting images during editing

    Hello,
    Starting a few days ago, aperture started corrupting images during editing.  This was normally at the time of my fist cut, going through doing simple straighten and croping.  Sometimes it would happen when doing a small lighten or darken of the exposure.  I purchased a new MacBook Pro about a month ago but this only started happening this week.  No OS or Aperture upgrades this week.  I did have a crash earlier this week and after the crash my Spotlight re-indexed my computer.  I updated QuickSilver this week and Awaken.  I tried quiting both QS and Awaken but problem still happens.  The real scary thing is I usally have to go back and re-import the raw CR2 image to fix the problem, doing an update from master or resetting all adjustments does not fix the problem.  Below is an example of an image with the problem.  This is a Version Export of a corrupted image, as you can see the cor  Can I get any help?

    Ernie Stamper:
    The Aperture Libraries are on the local drive.  I do have an external Firewire drive I can use to test your theory but since I recently replaced the whole laptop at the Apple store so I am thinking it is not hardware related but one of three things: an Aperture bug, my configuration, or memory (see more on memory below).
    leonieDF:
    I don't think it is related to a hardware issue unless it is memory. I took the laptop into the mac store because I was having a hardware issue not discussed in this thread.  The laptop was completely replaced except for the memory since I purchased 8GB of memory after the computer was purchased.  I put the 8GB memory back into the new laptop.  If this is a memory problem it is not showing up in diagnostics.  I am planning on doing two things this weekend.  First thing is putting back in the original apply memory and testing.  If I still get the issue I am going to do a complete uninstall of Aperture and re-install maybe something in my settings/libaries are corrupted.  I am reaching for straws at this point.  I might also try a complete reformat and only install Aperture and test to see if something else installed might be causing this, but I can't think of what it would be.

Maybe you are looking for

  • Add number of working days

    I have to subtract a number of 'working days' of a date field in my message mapping. I wrote a user defined function. I used cal.add(Calendar.DATE, -3); on the instance cal of the class Calendar. It subtracts 3 days, but I have to subtract 3 'working

  • Could I install OS-X on an HP 510 Laptop running an Intel 2.13 processor?

    I hate PCs but, here in the office, I have staff using them for MS Access and data processing etc.. However, I saw what I thought was a bargain today in a new HP laptop running what I think is the same processor in my Mini-Mac. The question is would

  • I want to create a form that I can change at an instance that will store the information without replacing it

    I want to create a form that I can change at an instance that will store the information without replacing it: Here are examples of what i have: This is the form:  The True/False in column B are actually check boxes Date Job Name Start End Hours Work

  • Setting classpath in solaris

    Hi, I m new to solaris. I m not gettin how to set the class path in environment variables. Writing the class path every time before compilation & execution making me bore. & can I set anything like doskey(used in windows) in Solaris. thanks & regards

  • Illustrator CS6.5 (Mac) crashes at launch

    I ran the Illustrator update today and now Illustrator won't open. I thought it might be a font issue and I deactivated all except the system fonts and cleared the font cache. I reset the Illustrator preferences. I don't know what else to do. If anyo